B7 STUDS. Specification:
|
|
- Blake Snow
- 7 years ago
- Views:
Transcription
1 Plated Black Specification: The material for B7 Studs and Nuts conform to the requirements of ASTM A13 Grade B7, AISI 41, 4142, High strength carbon steel, maximum yield strength of 5,000 PSI and minimum tensile strength of 1,000 PSI For 1 and smaller : threads are Unified inch coarse or fine series (UNC or UNF series), Class 2A, in accordance with ANSI/ASME B1.1 For size larger than 1 : threads are Unified coarse or thread series (UNC or UN Series) Screw threads are based on System 21 of ANSI/ASME B1.3 Coating available in Plated and Black ENGINEER APPROVAL Plated <>1/2 <>5/ <>3/4 <>7/ <>1 <>1 1/ <>1 1/4 <>1 3/ Black <>1/2 <>5/ <>3/4 <>7/ <>1 <>1 1/ <>1 1/4 <>1 3/ JOB: DATE: / / MEETS DIMENSIONAL SPECIFICATIONS: YES NO MEETS MATERIAL SPECIFICATIONS: YES NO MEETS PRESSURE / TEMPERATURE SPECIFICATIONS: YES NO NOTES: ENGINEER NAME: ENGINEER SIGNATURE: * Due to the continuous development of our products, design or construction may change without prior notice.
2 Plated - B7 Studs ½ B7SWNPL.x2. B7SWNPL.x2.75 B7SWNPL.x3 B7SWNPL.x3. B7SWNPL.x3. ½ x 2 ½ ½ x 2 ¾ ½ x 3 ½ x 3 ¼ ½ x 3 ½ B7SWNPL.x3 B7SWNPL.x3. B7SWNPL.x3. B7SWNPL.x3.75 B7SWNPL.x4 B7SWNPL.x4. B7SWNPL.x4.5 B7SWNPL.x4.75 B7SWNPL.x5 B7SWNPL.x5. B7SWNPL.x5. B7SWNPL.x B7SWNPL.x. B7SWNPL.x. B7SWNPL.x7 B7SWNPL.x B7SWNPL.x 5 x 3 5 x 3 ¼ 5 x 3 ½ 5 x 3 ¾ 5 x 4 5 x 4 ¼ 5 x 4 ½ 5 x 4 ¾ 5 x 5 5 x 5 ¼ 5 x 5 ½ 5 x 5 x ¼ 5 x ½ 5 x 7 5 x 5 x ¾ B7SWNPL.75x3.75 B7SWNPL.75x4 B7SWNPL.75x4. B7SWNPL.75x4. B7SWNPL.75x4.75 B7SWNPL.75x5 B7SWNPL.75x5. B7SWNPL.75x5. B7SWNPL.75x5.75 B7SWNPL.75x B7SWNPL.75x. B7SWNPL.75x.75 B7SWNPL.75x7 B7SWNPL.75x7. B7SWNPL.75x7.75 B7SWNPL.75x B7SWNPL.75x. B7SWNPL.75x B7SWNPL.75x ¾ x 3 ¾ ¾ x 4 ¾ x 4 ¼ ¾ x 4 ½ ¾ x 4 ¾ ¾ x 5 ¾ x 5 ¼ ¾ x 5 ½ ¾ x 5 ¾ ¾ x ¾ x ½ ¾ x ¾ ¾ x 7 ¾ x 7 ½ ¾ x 7 ¾ ¾ x ¾ x ½ ¾ x ¾ x
3 Plated - B7 Studs 7 B7SWNPL.75x4.5 B7SWNPL.75x4.75 B7SWNPL.75x5 B7SWNPL.75x5. B7SWNPL.75x5. B7SWNPL.75x5.75 B7SWNPL.75x B7SWNPL.75x. B7SWNPL.75x. B7SWNPL.75x7 B7SWNPL.75x7. B7SWNPL.75x B7SWNPL.75x. B7SWNPL.75x B7SWNPL.75x. B7SWNPL.75x. B7SWNPL.75x11 7 x 4 ½ 7 x 4 ¾ 7 x 5 7 x 5 ¼ 7 x 5 ½ 7 x 5 ¾ 7 x 7 x ¼ 7 x ½ 7 x 7 7 x 7 ½ 7 x 7 x ½ 7 x 7 x ¼ 7 x ½ 7 x B7SWNPL1.0x5. B7SWNPL1.0x5. B7SWNPL1.0x5.75 B7SWNPL1.0x B7SWNPL1.0x. B7SWNPL1.0x. B7SWNPL1.0x.75 B7SWNPL1.0x7 B7SWNPL1.0x7. B7SWNPL1.0x B7SWNPL1.0x. B7SWNPL1.0x B7SWNPL1.0x13. 1 x 5 ¼ 1 x 5 ½ 1 x 5 ¾ 1 x 1 x ¼ 1 x ½ 1 x ¾ 1 x 7 1 x 7 ½ 1 x 1 x ½ 1 x 1 x 13 ½ B7SWNPL1.1x5.75 B7SWNPL1.1x. B7SWNPL1.1x. B7SWNPL1.1x.75 B7SWNPL1.1x7 B7SWNPL1.1x7. B7SWNPL1.1x7. B7SWNPL1.1x7.75 B7SWNPL1.1x B7SWNPL1.1x. B7SWNPL1.1x. B7SWNPL1.1x x 5 ¾ 1 1 x ¼ 1 1 x ½ 1 1 x ¾ 1 1 x x 7 ¼ 1 1 x 7 ½ 1 1 x 7 ¾ 1 1 x 1 1 x ½ 1 1 x ½ 1 1 x ¾
4 Plated - B7 Studs 1¼ B7SWNPL1.x5 B7SWNPL1.x5.75 B7SWNPL1.x.75 B7SWNPL1.x7 B7SWNPL1.x7. B7SWNPL1.x7.75 B7SWNPL1.x B7SWNPL1.x. B7SWNPL1.x. B7SWNPL1.x.75 B7SWNPL1.x B7SWNPL1.x. B7SWNPL1.x. B7SWNPL1.x.75 B7SWNPL1.x.75 1 ¼ x 5 1 ¼ x 5 ¾ 1 ¼ x ¾ 1 ¼ x 7 1 ¼ x 7 ½ 1 ¼ x 7 ¾ 1 ¼ x 1 ¼ x ¼ 1 ¼ x ½ 1 ¼ x ¾ 1 ¼ x 1 ¼ x ¼ 1 ¼ x ½ 1 ¼ x ¾ 1 ¼ x ¾ B7SWNPL1.375x B7SWNPL1.375x x 1 3 x 11 ¼ 5.3.
5 Black - B7 Studs ½ B7SWNBK.x2. B7SWNBK.x2.75 B7SWNBK.x3 B7SWNBK.x3. B7SWNBK.x3. ½ x 2 ½ ½ x 2 ¾ ½ x 3 ½ x 3 ¼ ½ x 3 ½ B7SWNBK.x3 B7SWNBK.x3. B7SWNBK.x3. B7SWNBK.x3.75 B7SWNBK.x4 B7SWNBK.x4. B7SWNBK.x4.5 B7SWNBK.x4.75 B7SWNBK.x5 B7SWNBK.x5. B7SWNBK.x5. B7SWNBK.x B7SWNBK.x. B7SWNBK.x. B7SWNBK.x7 B7SWNBK.x B7SWNBK.x 5 x 3 5 x 3 ¼ 5 x 3 ½ 5 x 3 ¾ 5 x 4 5 x 4 ¼ 5 x 4 ½ 5 x 4 ¾ 5 x 5 5 x 5 ¼ 5 x 5 ½ 5 x 5 x ¼ 5 x ½ 5 x 7 5 x 5 x ¾ B7SWNBK.75x3.75 B7SWNBK.75x4 B7SWNBK.75x4. B7SWNBK.75x4. B7SWNBK.75x4.75 B7SWNBK.75x5 B7SWNBK.75x5. B7SWNBK.75x5. B7SWNBK.75x5.75 B7SWNBK.75x B7SWNBK.75x. B7SWNBK.75x.75 B7SWNBK.75x7 B7SWNBK.75x7. B7SWNBK.75x7.75 B7SWNBK.75x B7SWNBK.75x. B7SWNBK.75x B7SWNBK.75x ¾ x 3 ¾ ¾ x 4 ¾ x 4 ¼ ¾ x 4 ½ ¾ x 4 ¾ ¾ x 5 ¾ x 5 ¼ ¾ x 5 ½ ¾ x 5 ¾ ¾ x ¾ x ½ ¾ x ¾ ¾ x 7 ¾ x 7 ½ ¾ x 7 ¾ ¾ x ¾ x ½ ¾ x ¾ x
6 Black - B7 Studs 7 B7SWNBK.75x4.5 B7SWNBK.75x4.75 B7SWNBK.75x5 B7SWNBK.75x5. B7SWNBK.75x5. B7SWNBK.75x5.75 B7SWNBK.75x B7SWNBK.75x. B7SWNBK.75x. B7SWNBK.75x7 B7SWNBK.75x7. B7SWNBK.75x B7SWNBK.75x. B7SWNBK.75x B7SWNBK.75x. B7SWNBK.75x. B7SWNBK.75x11 7 x 4 ½ 7 x 4 ¾ 7 x 5 7 x 5 ¼ 7 x 5 ½ 7 x 5 ¾ 7 x 7 x ¼ 7 x ½ 7 x 7 7 x 7 ½ 7 x 7 x ½ 7 x 7 x ¼ 7 x ½ 7 x B7SWNBK1.0x5. B7SWNBK1.0x5. B7SWNBK1.0x5.75 B7SWNBK1.0x B7SWNBK1.0x. B7SWNBK1.0x. B7SWNBK1.0x.75 B7SWNBK1.0x7 B7SWNBK1.0x7. B7SWNBK1.0x B7SWNBK1.0x. B7SWNBK1.0x B7SWNBK1.0x13. 1 x 5 ¼ 1 x 5 ½ 1 x 5 ¾ 1 x 1 x ¼ 1 x ½ 1 x ¾ 1 x 7 1 x 7 ½ 1 x 1 x ½ 1 x 1 x 13 ½ B7SWNBK1.1x5.75 B7SWNBK1.1x. B7SWNBK1.1x. B7SWNBK1.1x.75 B7SWNBK1.1x7 B7SWNBK1.1x7. B7SWNBK1.1x7. B7SWNBK1.1x7.75 B7SWNBK1.1x B7SWNBK1.1x. B7SWNBK1.1x. B7SWNBK1.1x x 5 ¾ 1 1 x ¼ 1 1 x ½ 1 1 x ¾ 1 1 x x 7 ¼ 1 1 x 7 ½ 1 1 x 7 ¾ 1 1 x 1 1 x ½ 1 1 x ½ 1 1 x ¾
7 Black - B7 Studs 1¼ B7SWNBK1.x5 B7SWNBK1.x5.75 B7SWNBK1.x.75 B7SWNBK1.x7 B7SWNBK1.x7. B7SWNBK1.x7.75 B7SWNBK1.x B7SWNBK1.x. B7SWNBK1.x. B7SWNBK1.x.75 B7SWNBK1.x B7SWNBK1.x. B7SWNBK1.x. B7SWNBK1.x.75 B7SWNBK1.x.75 1 ¼ x 5 1 ¼ x 5 ¾ 1 ¼ x ¾ 1 ¼ x 7 1 ¼ x 7 ½ 1 ¼ x 7 ¾ 1 ¼ x 1 ¼ x ¼ 1 ¼ x ½ 1 ¼ x ¾ 1 ¼ x 1 ¼ x ¼ 1 ¼ x ½ 1 ¼ x ¾ 1 ¼ x ¾ B7SWNBK1.375x B7SWNBK1.375x x 1 3 x 11 ¼ 5.3.
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationManufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationHilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
More informationLet s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference).
Bolt s I have been on a quite a few online email lists over the last 7 years or so, basically since they first came out. From the original Jeep-L list to the XJ-list to the Rockcrawler.com board, a common
More informationGUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationHAMMER UNIONS HAMMER UNIONS. Figure 100 TxT Figure 200 & 206 TxT Figure 602 TxT. Figure 1002 TxT Figure 1002 BW Figure 1502 TxT Figure 1502 BW
HAMMER UNIONS Figure 00 Figure 00 & 06 Figure 60 Figure 00 Figure 60 Figure 00 Figure 00 Figure 0 Figure 0 Specification: HAMMER UNIONS The material for the Hammer Union conforms to the requirements of
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More informationHigh tensile strength stainless fasteners
High tensile strength stainless fasteners BUFAB STAINLESS HISTORY 1674 Svartå Bruk was founded 1912 Svartå Bruk was incorporated into the Hasselfors group. 1947 Production of Stainless Steel Fasteners
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationSECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationTZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
SECTION 2.2 PAGE 1 / 9 l DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic tension and shear loads
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationTolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationLEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code
LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationSubmittal Information
Wedge SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchs feature a stainless steel expansion clip, threaded stud body, nut and washer. Anch bodies are made of plated carbon steel, hot-dipped galvanized
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationRPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationReproduced with the permission of the American Welding Society (AWS), Miami, Florida - 09/15/2011. 7. Stud Welding
7. Stud Welding 7.1 Scope Section 7 contains general requirements for welding steel studs to steel (see 7.2.7 and 1.2.2 for approved steels). In addition, it stipulates specific requirements for the following:
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationCamcar Socket Screw Technical Manual
Camcar Socket Screw Technical Manual Camcar Socket Screws Founded on Innovation and Technical Expertise The Camcar brand began in 1943, cold forming a component others said couldn't be made. From that
More informationAmerican National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
More informationSITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
More informationAlternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
More informationCODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
More informationBWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More informationVAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationPreformed Metal Roofing and Siding
Page -1-1. GENERAL 1.1. Description This specification along with the drawings covers the furnishing of all material, products, equipment, accessories, tools, services, transportation, labor and supervision
More informationValve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
More informationNORSOK Compact Flange Installation and Assembly Procedure
NORSOK Compact Flange Installation and Assembly Procedure Hytorc Norway www.hytorc.no P.Nødland. Page 2 INTRODUCTION Scope The following main operations are covered in this section: Assembly/disassembly
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationSECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
More informationPIPE SUPPORT & ALIGNMENT SYSTEM CATALOG
PIPE SUPPORT & ALIGNMENT SYSTEM CATALOG Catalog 611 The Fastest and Most Economical Method to Postion and Support Plumbing Chase Piping. The Sumner Pipe Support System is designed to eliminate the problems
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
More informationLIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D.
LIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D. INTRODUCTION The purpose of the American Galvanizers Association s wire study was to determine the working load limit for support wire that
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationRef.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777
Ref.nr.: Oud-eijerland Willem eukelszstraat 1 3261 LV Oud-eijerland elefoon: +31(0)186 620 777 russel 1853 Strombeek - ever elgië elefoon: +32(0)2 267 41 14 elefoon: +31(0)10 283 90 00 Ordering s ypical
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationConnection Solutions
Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction
More informationAppendice Caratteristiche Dettagliate dei Materiali Utilizzati
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,
More information22 Torque Control. 23 Torque and Turn Control. 25 Stretch Control. 25 Direct Tension Control
Technical Reference Guide Table of Contents Subject Page # Fastener Material Selection 1 Mechanical Properties Materials 3 Galling 6 Heat Treatment 7 Screw Thread Fundamentals 10 Strength of Threads 12
More informationASTM D 2000 - M 5BG 407 A14 B14 E014 E034 F17
Understanding an ASTM D 2000 Call Out The ASTM D 2000 classification provides a system to standardize the properties of rubber materials. This classification was originally developed for use in the automotive
More informationPC-Concrete Injectable Concrete Anchoring and Repair System
PC-Concrete Injectable Concrete Anchoring and Repair System DESCRIPTION: PC-Concrete is a two component (1:1 ratio), 100% solids, high modulus, structural epoxy paste. PC-Concrete is a solvent free, no
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationDESIGN AND DEVELOPMENT OF A QUOTING SYSTEM FOR A FASTENER MANUFACTURER
19 th International Conference on Production research DESIGN AND DEVELOPMENT OF A QUOTING SYSTEM FOR A FASTENER MANUFACTURER E. Shayan, V. Chitroda Faculty of Engineering and Industrial Siences Swinburne
More informationCOLORADO MODEL. 35 x 65 SPECIFICATIONS
COLORADO MODEL 35 x 65 SPECIFICATIONS Dimensions: Roof Dimensions 35-0 x 65-0 Column Dimensions (center to center) 31-0 x 30-6 Minimum Clearance 14-0 Roof Height @ Peak ±18-8 Curved Roof ±42-6 radius Square
More informationSTANDARDS FOR THE MATERIALS
STANDARDILUETTELO 1(15) Kpl Standardin numero STANDARDS FOR THE MATERIALS 1 EN 10204 2004-10 Metallic products.types of inspection documents 2 EN 10079 1992-10 Definition of steel products 3 EN 10027-1
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
More informationATLANTA MODEL SPECIFICATIONS
ATLANTA MODEL 50 SPECIFICATIONS Dimensions: Roof Dimensions (point to point) 50-0 Column Dimensions (out to out of columns) 44-0 Eave Height 8-0 Roof Height @ Peak ±21-8⅞ Hip Roof 6:12 pitch Square Feet
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationVeneer Anchors. Masonry Veneer Anchors. Description. Applications
Veneer Anchors Description Dur-O-Wal manufactures and markets a large variety of veneer anchor assemblies designed and engineered to anchor brick, tile, stone or CMU veneer to a wood stud, metal stud,
More informationDIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION: 06 05 23 WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 ICC ES Report ICC ES (800) 4 6587 (56) 699 054 www.icc es.org 000 Most Widely Accepted and Trusted ESR 0 Reissued 07/06 This report is subject to renewal 07/07. DIVISION: 06 00 00 WOOD, PLASTICS AND
More informationTEST REPORT. Rendered to: LMT-Mercer Group, Inc. For: PRODUCT: 4" x 4" and 5" x 5" PVC Porch Posts with Aluminum Reinforcing
TEST REPORT Rendered to: LMT-Mercer Group, Inc. For: PRODUCT: 4" x 4" and 5" x 5" PVC Porch Posts with Aluminum Reinforcing Report No.: Report Date: 01/28/14 Test Record Retention Date: 12/20/17 130 Derry
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationVALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
More informationFord Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationSTANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationDENVER MODEL 30 X 30 SPECIFICATIONS
DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch
More informationAPI Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
More informationCCR274SS. A-286 305 CRES SOLID FILM LUBE PASSIVATE CCR274CS p e r per per per (MS20604R) AMS 5731 ASTM A-493 MIL-L-46010 QQ-P-35 L F
UNIVERSAL HEAD / CCR274SS & CS NOT TO EXCEED RIVET DIAMETER DlA DASH D I A A B MIN./MAX. MlN./MAX. MIN./MAX. -3.092/.097.178/.196.040/.050-4.123/.128.238/.262.054/.064 All fasteners should be specified
More informationTYPICAL WIRING OF METER SOCKET FOR SINGLE PHASE, THREE WIRE OVERHEAD SERVICE
TYPICAL WIRING OF METER SOCKET FOR SINGLE PHASE, THREE WIRE OVERHEAD SERVICE A. GENERAL NOTES: Service entrance line and load conductors, conduit straps, weatherhead, lock nuts, bushings, connectors, and
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-2369 Reissued May 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More information