SERIES Energy Efficient TEFC Induction Motors
|
|
- Clifford Ross
- 7 years ago
- Views:
Transcription
1 SERIES Energy Efficient TEFC Induction Motors
2
3 SERIES Induction Motors Crompton Greaves series belongs to a family of state-of-the-art energy efficient totally enclosed fan cooled (TEFC) 3 phase Induction motors with cage rotor construction. An almost flat efficiency curve is achieved by effectively utilizing materials (special grades of materials) while minimizing losses. In conjunction with thermally optimized frames, cooling fans are designed with low noise profiles. Higher efficiencies at part loads result in greater energy savings making it suitable for use when load variations exist. The components are optimized using finite element analysis of electromagnetic, structural, thermal and air flow, which ensures better stress distribution and high structural rigidity. Adequate steps have been taken in the electrical design process to make sure that the natural frequencies of stator teeth and core remain well away from the supply frequency. Appropriate selection of tolerances and fits in addition to good manufacturing processes facilitate high level of quality. The rotor and fans are separately balanced on precision balancing machine to very stringent grades. All these put together, result in extremely low vibration levels. Efficiency (%) Value For Money 580kW, 6600V, 2 Pole, 400 Frame Motor Efficiency Pattern Load (%) Salient Features Energy efficient fan cooled Induction motors (IM) Cast Iron / Fabricated Steel frame High efficiency levels even at part load Good power factor Low starting current Low noise levels Low vibration levels Solid deep rotor bars arranged in single cage construction Special double cage as per driven equipment requirement IP55 Degree of protection Class 'F' insulation with temperature rise limited to class B' Vacuum pressure impregnation (VPI) insulation system Axially ventilated rotor design Antifriction bearings Dynamically balanced rotors as per ISO:1940 Grade 2.5 Machined stator Ease of maintenance, with simplified component sub-assemblies Stringent quality checks Motors for all applications Enclosure SERIES :Totally Enclosed Fan Cooled (TEFC) - IC411 NG Series Output Chart Power Voltage Number of Poles Mounting : kW (up to 2000kW*) : V (up to 11000V*) :2-6 (up to 12 Pole*) :IM B3, IM B35, IM V1 Frame Size :IEC ( *) Standards Range includes * Available on request :IEC / IS:325 :Motors Suitable for Hazardous area, Ex e, Ex n and VFD Applications. * Hz Pole 60Hz
4 TEFC - 3 Phase Squirrel Cage Induction Motors Performance Data - 690V, 50Hz Item Code Description NG 315 S H L2 A NG Shaft Height Frame Length Mounting Energy Efficient TEFC IM 315 / 355 / 400 / 450 mm S (Small) / L (Large) H - Horizontal (B3) V - Vertical (V1) B - Foot Cum Flange (B35) Voltage Design Reference L2-690V, 50Hz M1-3300V, 50Hz M2-6600V, 50Hz A / B / C / D / E Pole 2 / 4 / 6 Torque Current Power Factor Efficiency Item Code Output Speed Tn Ts/ Tn Tmax/ Tn In Is/ In lo 100% 75% 50% 100% 75% 50% Rotor Weight kw HP rpm (N-m) (%) (%) (A) (%) (A) load load load load load load Inertia (kg) 2 (kgm ) SH L2A * SH L2B * SH L2C * Pole SH L2A * LH L2B * LH L2C * LH L2D * SH L2A * SH L2B * LH L2A * LH L2B * SH L2A * SH L2B * SH L2C * Pole SH L2A * LH L2B * LH L2C * LH L2D * SH L2A * LH L2B * LH L2A * LH L2B * LH L2C * Pole SH L2A * SH L2B * SH L2C * SH L2A * LH L2B * LH L2C * SH L2A * SH L2B * LH L2C * LH L2D * LH L2A * LH L2B * LH L2C * '*' marked figures are inclusive of IEC/IS tolerance. Insulation is suitable for Class F with temperature rise limited to Class B. Designed for ambient temperature of 40 C. The above values are subject to IEC/IS tolerance. Motors are designed for continuous duty. Motors for other duties available on request. Stator winding is delta connected. The above performance figures are indicative in nature. The commitments will be made after studying specific requirement of the application.
5 TEFC - 3 Phase Squirrel Cage Induction Motors Performance Data V, 50Hz Torque Current Power Factor Efficiency Item Code Output Speed Tn Ts/ Tn Tmax/ Tn In Is/ In lo 100% 75% 50% 100% 75% 50% Rotor Weight kw HP rpm (N-m) (%) (%) (A) (%) (A) load load load load load load Inertia (kg) 2 (kgm ) SH M1A * SH M1B * SH M1C * Pole 2 Pole SH M1A * LH M1B * LH M1C * LH M1D * LH M1A * LH M1B * LH M1C * LH M1D * LH M1A * LH M1B * LH M1C * SH M1A * SH M1B * SH M1C * SH M1A * LH M1B * LH M1C * LH M1D * SH M1A * SH M1B * LH M1C * LH M1D * LH M1E * LH M1A * LH M1B * LH M1C * LH M1D * LH M1E * SH M1A * SH M1B * SH M1A * LH M1B * LH M1C * LH M1D * Pole SH M1A * LH M1B * LH M1C * LH M1D * LH M1E * LH M1A * LH M1B * LH M1C * LH M1D * LH M1E * '*' marked figures are inclusive of IEC/IS tolerance. Insulation is suitable for Class F with temperature rise limited to Class B. Designed for ambient temperature of 40 C. The above values are subject to IEC/IS tolerance. Motors are designed for continuous duty. Motors for other duties available on request. Stator winding is star connected. The above performance figures are indicative in nature. The commitments will be made after studying specific requirement of the application.
6 TEFC - 3 Phase Squirrel Cage Induction Motors Performance Data V, 50Hz Torque Current Power Factor Efficiency Item Code Output Speed Tn Ts/ Tn Tmax/ Tn In Is/ In lo 100% 75% 50% 100% 75% 50% Rotor Weight kw HP rpm (N-m) (%) (%) (A) (%) (A) load load load load load load Inertia (kg) 2 (kgm ) SH M2A * SH M2B * SH M2C * Pole SH M2A * LH M2B * LH M2C * LH M2D * SH M2A * LH M2B * LH M2C * LH M2D * LH M2A * LH M2B * LH M2C * SH M2A * SH M2B * SH M2C * Pole SH M2A * SH M2B * LH M2C * LH M2D * LH M2E * SH M2A * SH M2B * LH M2C * LH M2D * LH M2E * LH M2A * LH M2B * LH M2C * Pole SH M2A * SH M2B * SH M2C * SH M2A * LH M2B * LH M2C * LH M2D * SH M2A * SH M2B * LH M2C * LH M2D * LH M2E * LH M2A * LH M2B * LH M2C * LH M2D * '*' marked figures are inclusive of IEC/IS tolerance. Insulation is suitable for Class F with temperature rise limited to Class B. Designed for ambient temperature of 40 C. The above values are subject to IEC/IS tolerance. Motors are designed for continuous duty. Motors for other duties available on request. Stator winding is star connected. The above performance figures are indicative in nature. The commitments will be made after studying specific requirement of the application.
7 SERIES IM-B3 Mounting 3300V / 6600V 690V FRAME POLE A B C D E H HD AD AE AE LD L S S L S L L All dimensions in mm SERIES IM-V1 Mounting FRAME M N P S D E T AD AE L All dimensions in mm
8 For more information: Visit us at: Ref. - CG / LRM - India / 2013 / NG Series Leaflet / R00 / July 13 Due to continuous product improvements and its incorporation, CG reserves the right to change the design, technical specifications and dimensions without prior notice.
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP ABB The Preferred Partner Egypt Cement Corporation, a major cement manufacturer, has chosen ABB wound rotor motors for all key applications
More informationTHREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES IE2 FRAMES 80 355 0,75 315kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in this catalogue satisfy the essential
More informationICQ Series - square centrifugal
product ICQ Square Centrifugal (TEFC) dimensions mm 280-710 poles & duty 4-8 / up to 4,500 L/s application High performance centrifugal fans for medium to high pressure ducted systems. ICQ Series The ICQ
More informationELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
More informationA S Y N C H R O N O U S M O T O R S
ASYNCHRONOUS M O T O R S S E R I E S INDAR ASYNCHRONOUS MOTORS S E R I E S WHO WE ARE Indar Electric s trajectory is endorsed by the construction of thousands of motors for the different industrial sectors.
More informationData Sheet. AC Industrial Electric Motors
Data Pack B Issued ovember 2005 1502325812 Data Sheet AC Industrial Electric Motors Standards organisations The RS-ABB range of ac induction motors is produced to common European standards, these being
More informationProduct Brochure. Certified Mining Motors
Product Brochure Certified Mining Motors Profile Baldor Electric Company (a member of the ABB group) is a world leader in motors for the mining industry. In the continuous (24/7) operation of underground
More informationWe will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
More informationAC Replacement for DC Mill-Duty Motors
AC Replacement for DC Mill-Duty Motors This article is available online at www.aist.org for 30 days following publication. For many years, DC mill auxiliary motors for steel mill applications such as screwdowns,
More informationPPA & PPC series motors High specification cast iron units
Edition 4 Issue 3 PPA & PPC series motors High specification cast iron units Accreditation No. 14396 SOLUTIONS, not just products Specialists in Electric Motors, Geared Motors & AC Drives At CMG we offer
More informationGE Power Conversion. Motors. Medium / High Voltage and High Speed 190 to 100,000 kw 250 to 134,000 HP
GE Power Conversion Motors Medium / High Voltage and High Speed 190 to 100,000 kw 250 to 134,000 HP 2 GE I Power Conversion GE has been setting the standard in manufacturing motors for over 125 years.
More informationTurbo generators Best quality for thermal power plants
Turbo generators Best quality for thermal power plants www.andritz.com ANDRITZ HYDRO Turbo generators International technology Group ANDRITZ is a globally leading supplier of plants, equipment, and services
More informationGenerators TEM. for small hydroelectric power stations. Electric Machines
Generators for small hydroelectric power stations TEM Electric Machines Advanced solutions for the cleanest energy Reputable manufacturer of generators for small hydroelectric power stations TED Electric
More information2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
More informationMotor Specifications. Nameplate
Motor Specifications Nameplate The nameplate of a motor provides important information necessary for selection and application. The following drawing illustrates the nameplate of a sample 30 horsepower
More informationWater-cooled three-phase asynchronous motors. Type series K21B / K23B
Water-cooled three-phase asynchronous motors Type series K21B / K23B Contents Page Introduction 3 Standards and regulations 4 Design version 4 Water cooling 5 Degree of protection 5 Drain holes 5 Vibration
More informationCRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
More informationBMD. Permanent Magnet AC Synchronous Motors
BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established
More informationMounting Instructions. Torque Transducer. A0329 3.2 en
Mounting Instructions Torque Transducer T5 T5 Contents 3 Page Safety instructions.............................................. 4 1 Measuring characteristics..................................... 7 2 Mounting.....................................................
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More information1150 hp motor design, electromagnetic and thermal analysis
115 hp motor design, electromagnetic and thermal analysis Qasim Al Akayshee 1, and David A Staton 2 1 Mawdsley s Ltd., The Perry Centre, Davey Close, Waterwells, Gloucester GL2 4AD phone: +44 1452 888311
More informationSIMOTICS Low-Voltage Motors
SIMOTICS Low-Voltage Motors 'LVWULEXWLRQ RIIHULQJ 7KLV WHFKQLFDO EURFKXUH IRFXVHV RQ D VHOHFWHG PRWRU VSHFWUXP VSHFLILFDOO\ GHILQHG IRU WKH GLVWULEXWLRQ EXVLQHVV FRYHULQJ DOO PDLQ VWDQGDUG DSSOLFDWLRQV
More informationMT MOTORI ELETTRICI. Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D
MT MOTORI ELETTRICI Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D TABLE OF CONTENTS 1. Introduction 2. Scope of application 3. Installation
More informationSIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
More information4P20P4338. Frame 80 to 180
4P20P4338 Frame 80 to 180 F.S.E. Tamel S.A. 33-100 Tarnow. ul. Elektryczna 6, Poland phone: +48 14 632 11 00 fax: +48 14 621 96 64 E-mail: officetamel@tamel.pl Internet: www.tamel.pl Every care has been
More informationCDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
More informationEnergy Saving ECM Motors and Fans. 2010 Ventilation Catalogue
Energy Saving ECM s and Fans 2010 Ventilation Catalogue CONTENTS For ellington, sustainability is about delivering products at competitive prices while preserving the environment for future generations.
More informationSYNCHRONOUS MACHINES
SYNCHRONOUS MACHINES The geometry of a synchronous machine is quite similar to that of the induction machine. The stator core and windings of a three-phase synchronous machine are practically identical
More informationC Standard AC Motors
C Standard AC Standard AC C-1 Overview, Product Series... C-2 Constant... C-9 C-21 C-113 Reversible C-147 Overview, Product Series Constant Reversible Electromagnetic Brake C-155 Electromagnetic Brake
More informationAC Motor Speed. n s = synchronous speed (in RPM), f = frequency (in Hz), and p = the number of poles
AC Induction Motors Simplest and most rugged electric motor Consists of wound stator and rotor assembly AC in the primary member (stator) induces current in the secondary member (rotor) Combined electromagnetic
More informationPM734F - Technical Data Sheet Winding 28
- Technical Data Sheet Winding 28 SPECIFICATIONS & OPTIONS STANDARDS STAMFORD AC generators are designed to meet the performance requirements of IEC EN 60034-1. Other international standards, including
More information1 Temperature Derating Guide
VLT HVAC Drive FC 02 Application Note Temperature Derating Guide Temperature Derating Guide.. Abstract This paper provides detailed data regarding the operation of the VLT HVAC Drive FC02 at varying ambient
More informationPRODUCTS DC MOTORS BLPM MOTORS AC MOTORS CONTROLLERS
D R I V E S Y S T E M S PRODUCTS DC MOTORS BLPM MOTORS AC MOTORS CONTROLLERS The vision of Iskra Avtoelektrika is to be: One of the world's leading manufacturers of electric motors and controllers for
More information*ADVANCED ELECTRIC GENERATOR & CONTROL FOR HIGH SPEED MICRO/MINI TURBINE BASED POWER SYSTEMS
*ADVANCED ELECTRIC GENERATOR & CONTROL FOR HIGH SPEED MICRO/MINI TURBINE BASED POWER SYSTEMS Jay Vaidya, President Electrodynamics Associates, Inc. 409 Eastbridge Drive, Oviedo, FL 32765 and Earl Gregory,
More informationPrinciples of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
More informationCatalog. Low voltage Water cooled motors
Catalog Low voltage Water cooled motors We provide motors and generators, services and expertise to save energy and improve customers processes over the total lifecycle of our products, and beyond. 2 Low
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationTraditional Design of Cage Rotor Induction Motors. Ronald G. Harley and Yao Duan Georgia Institute of Technology November, 2009
Traditional Design of Cage Rotor Induction Motors Ronald G. Harley and Yao Duan Georgia Institute of Technology November, 2009 Rating considerations Dimensions of a machine depend on Torque at a specific
More informationPLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
More informationWhat Do All Those Things on an AC Motor Nameplate Mean?
What Do All Those Things on an AC Motor Nameplate Mean? Introduction: Ever order a motor on power, speed, and enclosure? PO says maybe "5 hp, 1,800 rpm, TEFC." New-motor nameplate says "HP 5, RPM 1748,
More informationW IE3 Premium efficiency motors Aluminium and Cast Iron frame
W IE3 Premium efficiency motors Aluminium and Cast Iron frame Frame 80 to 355 4P20P6692 F.S.E. Tamel S.A. 33-100 Tarnow. ul. Elektryczna 6, Poland phone: +48 14 632 11 00 fax: +48 14 621 96 64 E-mail:
More informationIntroduction. Upon completion of Basics of AC Motors you should be able to:
Table of Contents Introduction...2 AC Motors...4 Force and Motion...6 AC Motor Construction... 12 Magnetism... 17 Electromagnetism... 19 Developing a Rotating Magnetic Field...24 Rotor Rotation...29 Motor
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS Frames 143T - 449TZ 5100 North IH 35 Round Rock, Texas 78681 Phone: 800-451-8798 512-255-4141 Fax: 512-244-5512 RECEIVING 1. Check
More informationO-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
More informationMultistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationCOOLING TECHNOLOGY INSTITUTE
PAPER NO: CATEGORY: TP09-18 FANS COOLING TECHNOLOGY INSTITUTE RECENT DEVELOPMENTS IN MOTOR TECHNOLOGY ALLOW DIRECT DRIVE OF LOW SPEED COOLING TOWER FANS ROBBIE MCELVEEN BILL MARTIN RYAN SMITH BALDOR ELECTRIC
More informationANCILLARY EQUIPMENT AND ELECTRICAL EQUIPMENT Power Supply Systems and Electrical Equipment for Desalination Plants - Y.M. Hamud and A.H.
POWER SUPPLY SYSTEMS AND ELECTRICAL EQUIPMENT FOR DESALINATION PLANTS Y.M. Hamud and A.H. Anwar Abu Dhabi Water and Electricity Authority, Abu Dhabi, UAE Keywords : Electrical System, Network for Desalination,
More informationTorque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
More informationHow the efficiency of induction motor is measured?
How the efficiency of induction motor is measured? S. Corino E. Romero L.F. Mantilla Department of Electrical Engineering and Energy E.T.S.I.I. y T. Universidad de Cantabria Avda de Los Castros, 395 Santander
More informationFlygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
More informationSIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
More informationEquipment: Power Supply, DAI, Wound rotor induction motor (8231), Electrodynamometer (8960), timing belt.
Lab 13: Wound rotor induction motor. Objective: to examine the construction of a 3-phase wound rotor induction motor; to understand exciting current, synchronous speed and slip in this motor; to determine
More informationAC motors catalogue. www.parvalux.com
00 AC motors catalogue www.parvalux.com :: geared motors :: legendary reliability :: totally customisable :: Product guide DC brushless (PBL) DC permanent magnet (PM) AC induction (SD) motors only Type
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationRM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationAbsolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
More informationBorstlösa DC-motorer. Promoco Scandinavia AB
Borstlösa DC-motorer Promoco Scandinavia AB BL Series Brushless DC Motors with Integral Drive 24, 54, 68, and 70 mm diameters, 2W up to 110W output power Allied Motion s BL series of small brushless DC
More information3790 en - 06.2007 / d. Alternators LSA 46.2-4 Pole. Electrical and mechanical data
379 en - 6.7 / d Alternators LSA 46.2-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 46.2 alternator is designed to be suitable for typical generator applications, such
More informationHorizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
More informationELECTRIC MOTOR TEFC OPERATION & MAINTENANCE. meps Approved
SOUTH AUSTRALIA HEAD OFFICE (Accounts / Payments) 34-36 Kinkaid Avenue NORTH PLYMPTON SA 5037 Ph: (08) 8295 5566 Fax: (08) 8295 5533 VICTORIA 23 James Street CLAYTON SOUTH VIC 3169 Ph: (03) 9544 2324 Fax:
More informationExplosion Proof Dynamic Brushless Servo Motors
Explosion Proof Dynamic Brushless Servo Motors ExD SERIES OFFERING HIGH PERFORMANCE SERVO MOTORS FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN ACCORDANCE WITH ATEX AND IECEx Rev. C, October Explosion
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More informationMaterial: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry EX-Proof Stainless Steel Shaft Encoder - Ø 68 mm Shaft - Ø 10 mm to Ø 5/8 inch Resolution up to 10,000 ppr IP 66 (IP 67 option) ATEX certified EX-Proof IECEx certified EX-Proof
More informationChapter 4.5: Electric Motors, Variable Speed Drives
Short type questions Chapter 4.5: Electric Motors, Variable Speed Drives 1. The resistance of a motor stator winding at 30 C is 0.264 ohms per phase. What will be the resistance of the stator winding per
More informationBrush DC Motor Basics. by Simon Pata Business Unit Manager, Brushless DC
thinkmotion Brush DC Motor Basics by Simon Pata Business Unit Manager, Brushless DC Ironless DC Motor Basics Technical Note Brushed DC ironless motors are found in a large variety of products and applications
More informationSiemens AG 2009. Spindle solutions. Spindle motors and motor spindles for every requirement. Brochure October 2009. Motors. Answers for industry.
Spindle solutions Spindle motors and motor spindles for every requirement Brochure October 2009 Motors Answers for industry. The right spindle solution for any task The function, performance and accuracy
More informationRaising the waters. Lift irrigation is getting a boost from ABB s synchronous motors
Raising the waters Lift irrigation is getting a boost from ABB s synchronous motors JARI LINDSTRÖM, TAPIO RAUHALA, MAGNUS REJSTRÖM In India, the scarcity of water is unfortunately a harsh reality. Still,
More informationSIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
More informationBCI184E - Technical Data Sheet
BCI184E - Technical Data Sheet BCI184E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12702 This is to certify that the Electric Motor with type designation(s) RN series 56 up to 315L Manufactured by Rotor B.V. EIBERGEN, Netherlands
More informationREVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
SA Port Operations DOCUMENT TYPE: REFERENCE EEAM-Q-014 (ORIGINAL SPECIFICATION HE8.2.3 Ver5) REVISION 0 SPECIFICATION TITLE: SPECIFICATION FOR ELECTRICAL MOTORS AND GENERATORS PAGE 0 of 07 COMPILED BY
More informationStandard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
More informationIP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
More informationSolving VFD-sourced Bearing Current Problems in AC Motors.
Solving VFD-sourced Bearing Current Problems in AC Motors. The 2 main sources of motor shaft voltage are: 1. Asymmetric Motor construction The stator and rotor magnetic circuits within the motor itself
More informationEnergy Recovery Device isave 21-40
Data sheet Energy Recovery Device isave 21-40 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Table of Contents 1. General information....3 2. Benefits...3 3. Technical
More informationS Y N C H R O N O U S G E N E R A T O R S
S E R I E S SYNCHRONOUS G E N E R A T O R S INDAR SYNCHRONOUS GENERATORS S E R I E S BZK INDAR ELECTRIC INDAR, EXPERIENCE AND COOPERATION INDAR Electric develops and manufactures electrical rotating machines
More informationW50 Three-Phase Electric Motor
Motors Automation Energy Transmission & Distribution Coatings W50 Three-Phase Electric Motor Technical Catalogue IEC Market W50 - The New Generation of WEG Motors for Heavy Duty Applications The W50 motor
More information"AC2EC" - Replacement made easy New EC motor design Compact and efficient
"AC2EC" - Replacement made easy New EC motor design Compact and efficient The efficiency of the fans used is a central issue in ventilation and airconditioning technology. This is encouraged not only by
More informationApplication Information
Moog Components Group manufactures a comprehensive line of brush-type and brushless motors, as well as brushless controllers. The purpose of this document is to provide a guide for the selection and application
More informationSynchronous motor. Type. Non-excited motors
Synchronous motor A synchronous electric motor is an AC motor in which the rotation rate of the shaft is synchronized with the frequency of the AC supply current; the rotation period is exactly equal to
More informationIV. Three-Phase Induction Machines. Induction Machines
IV. Three-Phase Induction Machines Induction Machines 1 2 3 4 5 6 7 8 9 10 11 12 13 Example 1: A 480V, 60 Hz, 6-pole, three-phase, delta-connected induction motor has the following parameters: R 1 =0.461
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationMotor guide February 2014. Low voltage motors Motor guide
Motor guide February 2014 Low voltage motors Motor guide We provide motors and generators, services and expertise to save energy and improve customers processes over the total lifecycle or our products,
More informationHow To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
More information4P20P4668. Frame 80 to 355
4P20P4668 Frame 80 to 355 F.S.E. Tamel S.A. 33-100 Tarnow. ul. Elektryczna 6, Poland phone: +48 14 632 11 00 fax: +48 14 621 96 64 E-mail: officetamel@tamel.pl Internet: www.tamel.pl Every care has been
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
More informationGE Energy. Motors Product Line
GE Energy Motors Product Line Expect More We ve manufactured motors for over 125 years. In 1879, GE founder, Thomas Edison constructed the first electric motor ever made for a 110 to 120 Volt line at Menlo
More informationPermanent magnet synchronous motors for inverter operation
Permanent magnet synchronous motors for inverter operation Contents Contents Indroduction 5 Technical explanations 6 Energy saving motors 19 High-power motors 21 Torque motors 23 Dimensions 26 3 Certifi
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationPI044E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI044E - Winding 311 Technical Data Sheet PI044E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI144K - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS
PI144K - Winding 311 Technical Data Sheet PI144K SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section
More informationSpecifying a Variable Frequency Drive s
Specifying a Variable Frequency Drive s Put on by Bruce Reeves and Jeremy Gonzales Dykman Electrical Covering the Western US For all of your VFD and Soft Start and Motor Needs How To Specify a Variable
More informationPSA-G Precision Gearheads
Zero Backlash High Torque PSA-G Precision Gearheads High Precision When your applications require accurate positioning and precise motion control, Harmonic Drive Technologies offers the perfect solution.
More information32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw
,QGXVWULDO#*HQHUDWRU 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw Generator set consisting of engine and alternator mounted
More informationPI734D - Technical Data Sheet
PI734D - Technical Data Sheet PI734D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international
More information