AP25N01 Wireless Concurrent Dual Band PoE Access Point

Size: px

Start display at page:

Download "AP25N01 Wireless Concurrent Dual Band PoE Access Point"

Richard Barton
7 years ago
Views:

1 AP25N01 Wireless Concurrent Dual Band PoE Access Point Features This industrial access point is IEEE n compliant and backwards compatible with a/b/g. Enclosed inside a plenum metal enclosure it is perfect for those above ceiling installations where fire ratings must be maintained. This model concurrently or simultaneously operates in the 2.4 GHz and 5.1 to 5.8 GHz bands. Atheros XR extended range technology IEEE n compliant and backwards compatible with a/b/g Dual-band MIMO 2 x 2 spatial multiplexing technique Supports up to 300 Mbps physical data rates Supports IEEE i, IEEE 802.1x authentication Plenum rated metal enclosure to meet fire codes Transmission Power Control (IEEE h TPC) Power supply included or supports 802.3af and passive PoE Four RP-SMA antenna connectors (2 for 2.4 GHz; 2 for 5.1 to 5.8 GHz) Anti-static circuitry with ground protection lug Robust RF with up to 800mW Bridge or router network modes

2 Specifications HARDWARE b/g/n Processor Atheros AR7161 (680MHz) Network Processor System Memory 32MB DDR SDRAM NOR Flash 8MB LAN Interface 1 x 10/100 BASE-T Ethernet Port Antenna 2 x 2dBi detachable RP-SMA antenna Power Consumption 7.5Watts Radio Option 2 MIMO MINIPCI CARD RADIO b g 29dBm 6Mbps 29dBm 29dBm 24dBm Tx Specifications n/g MS0 26dBm 25dBm MS3 26dBm 25dBm MS7 23dBm 23dBm b g -94dBm 6Mbps -94dBm -94dBm -74dBm Rx Specifications n/g MS0-92dBm -90dBm MS3-86dBm -82dBm MS7-73dBm -71dBm Power Supply 24V to 48V DC, (24vdc power supply included) or PoE is supported. Power method Passive PoE(range 24V-48V DC), 802.3af PoE(48V-56V) or DC Jack RoHS Compliant Yes Weight 260 grams Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Temperature Range Operating:-20ºC to 70ºC Storage: -40ºC to 90ºC Dimension 145mm x 132mm x 41mm (H x W x D)

3 HARDWARE a/n Processor Atheros AR7161 (680MHz) Network Processor System Memory 32MB SDRAM NOR Flash 8MB LAN Interface 1 x 10/100 BASE-T Ethernet Port Antenna 2 x 2dBi detachable RP-SMA antenna Power Consumption 8.9Watts Radio Option 2 MIMO MINIPCI CARD RADIO Tx Specifications Rx Specifications 6Mbps a 29dBm 27dBm 24dBm n/a MS0 28dBm 27dBm MS3 27dBm 26dBm MS7 23dBm 22dBm a 6Mbps -96dBm 36Mbps -86dBm -79dBm n/a dbm MS0-95dBm -92dBm MS3-89dBm -84dBm MS7-75dBm -74dBm Power Supply 24V to 48V DC, power adapter and injector included Power method Passive PoE(range 24V-48V DC), 802.3af PoE(48V-56V) or DC Jack RoHS Compliant Yes Weight 260 grams Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Temperature Range Operating:-20ºC to 70ºC Storage: -40ºC to 90ºC Dimension 145mm x 132mm x 41mm (H x W x D) FIRMWARE Multiple SSID Supports up to four virtual access points (VAP) per radio, with unique BSSID. Each VAP can configure their own security and differentiated services. Long Range Support Suitable for long range wireless deployment with Proprietary Long Distance Algorithm of ACK and CTS timeout adjustment support. Provides recommended values for the parameters as well as allow for manual fine-tuning for optimal performance. Signal Strength Indicators LEDs are adjustable to display 4 different level strength Variable Spectrum Bandwidth Support Options to select operation over 5MHz, 20MHz and 40MHz spectrum bandwidth

4 OPERATIONAL FEATURES FIRMWARE INFORMATION Operating Modes WAN Type Device Management Data Capture & Notification Virtual Access Point (VAP) Advanced Features Access Points Station (client) Station WDS Repeater WDS Wireless Adapter Station + Router Access Point + Router Static IP Dynamic IP PPPoE HTTP / HTTPs Web Server SNMP V2c Telnet / Secure Shell (SSH) Event Login (Syslog) Detailed Statistics per Client Up to 4 SSIDs with unique MAC Addresses (BSSID) Built-in DHCP server Transmission Power Control (One db per step) Closed System (Suppress SSID) Transmission Rate Control Spanning Tree Protocol OTHER PROMINENT FEATURES DESCRIPTION Long Range Parameter Settings CPE Point-to-Point (PtP) Power with PoE IEEE h (DFS & TPC) SNMP Trap Signal Strength LEDs Indicators DHCP Relay (Only in Gateway or Wireless Routing Client Mode) Remote Upgrade of Firmware Distance adjustment for long range transmission Ideal as CPE device connecting PtP with a central AP Device power from PoE through ethernet cable provides flexible installation. Enables worldwide operation through support for standards-based Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC) SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event. 4 Step Progressive Bars. Each bar represents a progressive increase in signal strength, with 4 bars representing maximum signal strength (100%). Allows DHCP Clients on different subnets to get IP address from central DHCP server. Allows user to upgrade their firmware through Telnet/SSH RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode) Routing Information Protocol Version 1 / 2 Tag and Untag VLAN/VLAN Pass-through a. Tag VLAN Pass-through mode in AP/Transparent Client link b. Wireless untag Vlan to Ethernet Tag Vlan mode c. Wireless tag Vlan to Ethernet Tag Vlan mode

5 AIR Beverly Drive, Ste #140 Aurora, IL Tel: (630) Fax: (630)

Output Power (without antenna) 5GHz 2.4GHz

Output Power (without antenna) 5GHz 2.4GHz Dual Band High- PoE AP Router Dual Band Concurrent AP Router 11a + 11a/b/g Hi- Radios 802.3af PoE Port 7 Wireless Operation Modes 5/10/20 Variable Channel Width Home Digital Network Application School,