PRODUCT CARTON SPECIFICATION Outer/Inner Cartons, Designs & Camera Ready Art
|
|
- Magdalen Walters
- 7 years ago
- Views:
Transcription
1 PRODUCT CARTON SPECIFICATION Outer/Inner Cartons, Designs & Camera Ready Art OUTER CARTON SPECIFICATIONS OUTER CARTON PRODUCT DESCRIPTION HEIGHT (H) WIDTH (W) LENGTH (L) CARTON inches Mm inches mm inches mm TYPE 5KP, 5KW, 5W, DO-15, DO-41, DO-201, DO-201AD, R6, T1 (Tape and Reel form) A D2PAK A DF-M B DF-S A DO-15, DO-41, A-405 (Bulk form) B DO-201 / DO-201AD / R6 (Bulk form) A GBJ, GBU B HD A KBPC, GBPC, MP, MB A KBJ B KBP B PBL, RS A PBP A PBPC-3/6A A PBPC-8/10A B PBU, RS A TO-3P, TO B WOG A 1. All cartons must meet Rule 41 of the Uniform Freight Classification. 2. All cartons must not exceed 35 lbs. on weight. 3. All carton printing must be from supplied camera ready art (refer to figures 1-4 of this specification). 4. Printed carton color must be Black. 5. Dimension tolerance is ± 0.20 or ± 5.0mm. 6. General carton design types A and B must be followed. Due to varying carton shapes, it may be necessary to scale or reposition design elements to match general format. 7. Carton samples or layout must be submitted to Quality Assurance prior to first article shipment. 8. Product Packaging will periodically be inspected for compliance to this specification. INNER CARTON SPECIFICATIONS INNER CARTON PRODUCT DESCRIPTION HEIGHT (H) WIDTH (W) LENGTH (L) MAXIMUM inches mm inches mm inches mm QUANTITY D2PAK DF-M / DF-S (Tube) ,000 DF-S (Tape) ,500 DO-15, DO-41, A-405 (Bulk form) ,000 DO-201AD, R6 (Bulk form) DO ,000 GBJ, GBU HD ,000 KBJ ,000 KBP ,500 MELF ,000 MiniDIP ,000 MiniMELF ,500 SMA ,000 SMB ,000 SMC ,000 TO-3P ,000 WOG , All cartons must meet Rule 41 of the Uniform Freight Classification. 2. Dimension tolerance is ± 0.20in. or ± 5.0mm. 3. Product Packaging will periodically be inspected for compliance to this specification. 1 of 16
2 OUTSIDE CARTON TYPE A LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. 2 of 16
3 OUTSIDE CARTON TYPE B LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. 3 of 16
4 (Discrete Products) SQUARE FRONT Fig. 1 LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. 4 of 16
5 (Discrete Products) SQUARE SIDE Fig. 2 5 of 16
6 (Discrete Products) RECTANGLE (FRONT SIDE) Fig. 3 LPN LABEL PO LABEL BAR CODE LABEL MADE IN CHINA C/NO. N.W. G.W. 6 of 16
7 (Discrete Products) RECTANGLE (LONG SIDE) Fig. 4 7 of 16
8 (Discrete Products) OUTER CARTON SPECIFICATIONS OUTER CARTON PRODUCT PACKAGING HEIGHT (H) WIDTH (W) LENGTH (L) CARTON Inches mm inches mm inches mm TYPE 7 Tape Fig Tape Fig Tape (TC option) A POWERDI 5SP A Tube B LOSANGELES U.S.A ` 1757 Fig LOSANGELES U.S.A Fig. 6 8 of 16
9 (Discrete Products) INNER CARTON SPECIFICATIONS INNER CARTON HEIGHT (H) WIDTH (W) LENGTH (L) QTY CARTON (7" Tape) inches mm inches mm inches mm TYPE DFN Series (3K/reel) DFN Series (10K/reel) POWERDI 123 / POWERDI POWERDI SC SOD-123/323/ Fig. 7 SOD-323F SOT-23/323/353/363/523/ SOT-25/26/SC-74R SOT-553/ SOT-953/ DFN Series SOD323 / 523 SOT23F SOT-23/ 323/ 25/ 26 Note MSOP-8 Fig SM-8 SO-8 Note SOT-223 SOT Note: 1.Discrete packages with TA or TD taping suffix. Refer to datasheet for details Fig. 7 9 of 16
10 (Discrete Products) INNER CARTON SPECIFICATIONS INNER CARTON HEIGHT (H) WIDTH (W) LENGTH (L) CARTON QTY (13" Tape) inches mm inches mm inches mm TYPE DFN Series MSOP-8 / SO SOD323 / Note SOT-23/ 23F/ 323/ Fig. 8 SOT SOT POWERDI 5SP TO-252 Note Note 2. Discrete packages in 13 reel with taping suffix of TC and -13R in SOT89. Discrete packages in 13 reel other than those mentioned above are boxed directly to the discrete outer carton. H W L Fig. 8 (Tube) TO263 TO220, ITO220, TO262 INNER CARTON HEIGHT (H) WIDTH (W) LENGTH (L) inches mm inches mm inches mm QTY CARTON TYPE INNER CARTON HEIGHT (H) WIDTH (W) LENGTH (L) CARTON QTY (Ammo Packing) inches mm inches mm inches mm TYPE TO92 Note Note: 3. Discrete packages with STZ taping suffix. Refer to datasheet for details. 10 of 16
11 (Analog IC Products) OUTER CARTON SPECIFICATIONS OUTER CARTON PRODUCT PACKAGING HEIGHT (H) WIDTH (W) LENGTH (L) CARTON Inches mm inches mm inches mm TYPE Tube, Tray, Bag, PVC Box Fig 9 Tube (DIP 14L) B 7 & 13 Tape, Ammo Box Fig.10 7 & 13 Tape, Pizza Box/Inner Box Note Fig. 11 Note: 4. For small scale shipment (i.e. Max 4 pizza boxes or 6 inner boxes) C Fig. 9 Fig N.W: G.W: Fig of 16
12 (Analog IC Products) INNER CARTON SPECIFICATIONS (13 Tape) INNER CARTON HEIGHT (H) WIDTH (W) LENGTH (L) Qty Carton inches mm inches mm inches mm Type MSOP SOT Fig. 12 SOT89 PLCC(20-Lead) ,000 Fig. 12 PLCC(28-Lead) PLCC(44-Lead) TO Fig. 12 TSSOP(8,16-Lead) ,500 SOP (300mil) ,000 TSSOP (20,24,28-Lead) ,000 POWERDI , Fig of 16
13 (Analog IC Products) INNER CARTON SPECIFICATIONS HEIGHT (H) WIDTH (W) LENGTH (L) Qty (Ammo Box) inches mm inches mm inches mm (Fig. 13) SIP 4, TO-92 2, C Fig of 16
14 (Analog IC Products) INNER CARTON SPECIFICATIONS HEIGHT (H) WIDTH (W) LENGTH (L) Qty (Tube) inches mm inches mm inches mm (Fig. 14) DIP(300mil)(8-Lead) DIP(300mil)(14-Lead) Note DIP(300mil)(16-Lead) 2520 DIP(300mil)(20-Lead) 1260 DIP(300mil)(24-Lead) 1050 DIP(300mil)(28-Lead) 980 DIP(600mil)(40-Lead) 360 PLCC(20-Lead) 4800 PLCC(28-Lead) 3800 PLCC(44-Lead) 2080 SIP(Dry Pack),TO SIP(PVC Box) SOP(150mil)(5,7,8-Lead) SOP(150mil)(14-Lead) SOP(150mil)(16-Lead) SOP(300mil)(20-Lead) 5550 SOP(300mil)(24-Lead) 4650 SOP(300mil)(28-Lead) 3900 SOT TO-220,TO TO-220R(5-Lead) 1000 TO TSSOP(8-Lead) TSSOP(16-Lead) TSSOP(20-Lead) TSSOP(24-Lead) TSSOP(28-Lead) Note : 6. Carton type see Fig Fig. 14 Fig of 16
15 (Analog IC Products) INNER CARTON SPECIFICATIONS HEIGHT (H) WIDTH (W) LENGTH (L) Qty (Tray) inches mm inches mm inches mm (Fig. 16) LQFP, TQFP 1,600 QFP(44-Lead) QFP(52-Lead) Fig of 16
16 (Analog IC Products) INNER CARTON SPECIFICATIONS (7 Tape) HEIGHT (H) WIDTH (W) LENGTH (L) Qty inches mm inches mm inches mm (Fig. 17) SOT-23,SOT-25, SC-59 SOT ,000 DFN/QFN Series (Note 7) 15,000 QFN4040 6,000 Note: 7. Unless otherwise specified in the table C Fig of 16
Product Label Specification
STANDARD PRODUCT LABEL for Discrete Products 100-105 mm Scanned Data MMBT3904T-7-F 36-40 mm 9000 1252-CC43342.H1 Leading quiet zone Trailing quiet zone Fig. 1 Standard label for discrete products. 100-105
More informationTAPE AND REEL. Tape and Reel Specifications Surface Mount
Tape and Reel Packing Tape and reel packing is available for all SO, TSOT (thin SOT- 23), SOT-23 3L/4L, SOT-223, SSOP, TSSOP, QFN, DFN and DD packages in accordance with EIA Specification 481-D with the
More informationLot: a group of product that is unique to time, date and location of manufacture.
Supplier ar Code Labeling Requirements E-43002 1 Scope and Purpose This document establishes requirements for package labeling and date or lot code segregation for suppliers providing material to enchmark
More informationREVISION HISTORY Revision Description of Change Writer/Reviser. A New Release Julio Henriquez / Johan Martinsson / Dennis Quek
REVISION HISTORY Revision Description of Change Writer/Reviser A New Release Julio Henriquez / Johan Martinsson / Dennis Quek Effective Date 5-13-03 B Add section 7 Table Matrix line 7 description Julio
More informationMotorola Receiving Bar Code Specification
R1468/D Motorola Receiving ar Code Specification RECEIVING AR CODE SPECIFICATION No. 1213933A01 Memo 2 of 25 Memo Originator Details of Change O GS0901 M. Karija Initial Release 08-11-95 A GS0955 M. Karija
More informationM C C. www.mccsemi.com. THROUGH HOLE - AXIAL LEADED Through Hole Package Quantity Case. Micro Commercial Components TM
180 M THROUH HOL - XIL L Through Hole Package Quantity ase vailable Packaging (pcs) Style ulk 13 Tape & Reel mmo Pack ox/ag Qty Tube Qty Tray Qty Qty Qty -405 5000-1 2500 50 O-15 500 4000 3000 O-201 500
More informationMaximum Length = 4 lines of text, (10 or 8 Points or 6 or 7 LPB). Width of block no larger than 1.75 inches. Page 1 of 9
Supplier Compliance Container (B-10) Label (4 x 6 ) Specification Sheet For additional detail, refer to AIAG B-10 Guidelines June 2004. For Code 128, refer to Page 3 of this document. Part Number Block
More informationOwner's Manual. Assembly Instructions. Warranty. This Product is Produced Exclusively by 55-4100 55-4150. Tan Black
Owner's Manual Assembly Instructions Warranty Color Tan Black Model Number 55-4100 55-4150 Model Number 55-4100 / 4150 STAMINA PRODUCTS MADE IN CHINA This Product is Produced Exclusively by 2757 S. Austin,
More informationUCC/EAN 128 SERIAL SHIPPING CONTAINER LABEL (SSCC-18)
UCC/EAN 128 SERIAL SHIPPING CONTAINER LABEL (SSCC-18) All cartons shipped to BCFW Distribution Centers and direct to store shipments will require a BCFW UCC-128 Shipping Container label. As you implement
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More informationBar Code Label Requirements January 2014
Bar Code Label Requirements January 2014 Label Types B-10, Product Identification Labels B-12, Quick Receive Label Table of Contents Introduction...1 H-D Site Requirements...2 Label Certification...3 B-10
More informationBar Code Label Specification
Bar Code Specification April 1, 2005 55 Dragon Court, Woburn MA 01801 www.lytron.com 781-933-7300 Bar Code Specification Forward: Throughput and accuracy are key elements of Lytron s world-class manufacturing
More informationIR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications MECHANICAL DATA Pinning: = OUT, 2 = GND, 3 = V S 2 3 6672 APPLICATIONS Reflective sensors for hand dryers, towel or
More informationDate: 11-28-07 TITLE BAR CODE LABEL REQUIREMENTS Page 1 of 22
TITLE BAR CODE LABEL REQUIREMENTS Page 1 of 22 ECN No. Rev Date Originator Details of change. 49278 AA 04-19- A. BOSSERT NEW RELEASE 88 50334 AB 11-01- A. BOSSERT 88 57524 AC 10-18- R. KOTAR 90 SG101410
More informationPackaging Identification Standard
Packaging Identification Standard The attached document provides the Amtex Inc. supplier packaging identification standard for all raw materials to be received. Many references have been made to the Automotive
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 NPN Darlington Transistor This device is designed for applications requiring extremely high current gain at currents to 1.0 A. Sourced from Process 05.
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
More informationPackaging Guidelines Version Date: 11/6/12. ABB Inc. Packaging Guidelines. Version 1.0. Page 1. 3.04.P08.W03 Rev 0
ABB Inc. Packaging Guidelines Version 1.0 Page 1 Contents Master Carton:... 3 Data Requirements... 3 Barcodes... 5 Label Placement... 6 Packing List... 7 Page 1 Contents... 7 Page 2 Contents... 9 International
More informationINTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationNorth American Labeling Requirements (Canada, Mexico and United States) TRW PROCEDURE WA.D20.001
North American North American (Canada, Mexico and United States) TRW PROCEDURE WA.D20.001 REVISIONS Date Release No. Description Revision Engineer Sep 2003 Initial Release A00 M. Rausch Jun 2004 ERD94762
More informationSURFACE MOUNT NOMENCLATURE AND PACKAGING
SURFACE MOUNT NOMENCLATURE AND PACKAGING Tel 800-776-9888 Email info@topline.tv w w w. t o p l i n e. t v Contents Overview... 3 Flat Chip... 4 MELF Components...10 Tantalum Capacitors.... 12 Transistors
More informationThe Universal PCB Design Grid System
The Universal PCB Design Grid System Abstract: Mixing PCB Design Layout units will compromise perfection every time. PCB Design perfection starts with building CAD library parts and quickly moves to part
More informationLabel Standard for Incoming Parts
Label Standard for Incoming Parts VSP Label Standard for Incoming Parts v6.docx Page 1 of 10 Table of Contents 1 Introduction...4 1.1 Purpose...4 1.2 Scope...4 1.3 Sample Label Approval...4 2 General Label
More informationGS1-128 CARTON LABELING
Appendix SP-2 UCC 128 Label Requirements GS1-128 CARTON LABELING All cartons being shipped to Kohl s stores or distribution centers must have a compliant Kohl s GS1-128 carton label. These logistical labels
More informationQLT.DF1130.R04 Signature Authority Coversheet This coversheet shall accompany all controlled documents at all
Document No: R62003.R03 Page 1 of 19 Process Owner: Kacy Williams Effective Date: 2-15-08 Originating Dept.: Shipping / Receiving No. Copies Distributed: Title/Subject: Bar Code Label Guidelines Panasonic
More informationTechnical guide 1. june 2011
Technical guide 1. june 2011 Bar code labelling on primary and secondary packages for pharmaceutical products patient safety Preface This technical guide is designed to help companies put bar code labels
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationPIZZA! PIZZA! TEACHER S GUIDE and ANSWER KEY
PIZZA! PIZZA! TEACHER S GUIDE and ANSWER KEY The Student Handout is page 11. Give this page to students as a separate sheet. Area of Circles and Squares Circumference and Perimeters Volume of Cylinders
More informationPart I: Store Display Pallets
Part I: Store Display Pallets Mini pallet base dimensions are critical to ensure the proper handling of product through our entire retail system and therefore they must be strictly adhered to. The top
More informationSumitomo Electric Wiring Systems, Inc. Part Identification and Labeling Requirements
1.0 INTRODUCTION These specifications provide guidelines for printing and applying a Shipping/Parts Identification label. Note: In this document, the word must indicates a requirement and the word should
More informationSOT618-7. 1. Packing method
Rev. 2 10 April 2015 Packing information 1. Packing method Fig 1. Reel dry pack for SMD Table 1. Reel dimensions d w [1] 2. Product orientation Dimensions and quantities SPQ/PQ (pcs) [2] Reels per box
More informationCD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches
CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches General Description The CD4043BC are quad cross-couple 3-STATE CMOS NOR latches, and the CD4044BC are quad cross-couple 3- STATE
More informationAK-STM32-LKIT Development Board
AK-STM32-LKIT Development Board Reference manual Copyright 2011 Artekit Italy All rights reserved Contents About this document... 3 Revision history... 3 Contact information... 3 Life support policy...
More informationPackaging, Labeling, and Shipping Manual April 2013
Packaging, Labeling, and Shipping Manual April 2013 1 Packaging, Labeling, and Shipping Requirements All suppliers are responsible for designing packaging that will protect the product during shipment
More informationTHE VALSPAR CORPORATION
THE VALSPAR CORPORATION LABELING REQUIREMENTS FOR RAW MATERIALS SENT TO ALL VALSPAR CORPORATION LOCATIONS IN NORTH AMERICA January 2004 TABLE OF CONTENTS 1 Introduction...4 2 Compliance...4 3 Rationale...4
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More informationGS1 128 SERIAL SHIPPING CONTAINER LABEL Companion Report
GS1 128 SERIAL SHIPPING LABEL Companion Report Version: 1.00 Draft Author: Thomas A. Smith Company: Burlington Coat Factory Publication: 05/15/2013 Trading Partner: Notes: 05/15/2013 GS1-128 SERIAL SHIPPING
More informationPizza! Pizza! Assessment
Pizza! Pizza! Assessment 1. A local pizza restaurant sends pizzas to the high school twelve to a carton. If the pizzas are one inch thick, what is the volume of the cylindrical shipping carton for the
More informationHENKEL CLEVELAND MANUFACTURING AND LOUSVILLE MANUFACTURING FINISHED GOODS, CHEMICAL, AND RAW MATERIAL SUPPLIERS BAR CODED LABEL SPECIFICATIONS
HENKEL CLEVELAND MANUFACTURING AND LOUSVILLE MANUFACTURING FINISHED GOODS, CHEMICAL, AND RAW MATERIAL SUPPLIERS BAR CODED LABEL SPECIFICATIONS May 2006 SUPERSEDES ALL PREVIOUS ISSUES Specific Sections
More informationPART NO.: L-C150SRCT REV: A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More informationSpread Spectrum Clock Generator
Spread Spectrum Clock Generator DESCRIPTION is a clock generator for EMI (Electro Magnetic Interference) reduction. The peak of unnecessary (EMI) can be attenuated by making the oscillation frequency slightly
More informationVENDOR EDI MANUAL SPORTSMAN S GUIDE (SG)
VENDOR EDI MANUAL SPORTSMAN S GUIDE (SG) VERSION 1.1 TABLE OF CONTENTS INTRODUCTION... 3 LETTER FROM SENIOR VICE PRESIDENT, KEVIN MATTHEWS... 4 SPS COMMERCE CONTACT... 5 SPORTSMAN S GUIDE EDI CONTACT...
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More information(800) 892-2004 www.globebag.com
Custom Printing Expansive Inventory Our Distribution Facility Located in Woburn, MA (800) 892-2004 www.globebag.com GENERAL INFORMATION HOURS Office: Monday - Friday; 8:00AM to 4:30PM EST. Warehouse: Monday
More informationLenovo Global Labeling Guide. Volume 6 FRU Package Labels. Lenovo Part Number 41U3002
Lenovo Labeling Specification Page 1 of 11 Lenovo Part Number: 41U3002 Lenovo Global Labeling Guide Volume 6 FRU Package Labels Lenovo Part Number 41U3002 Release: 1.1 Current edition: October 6, 2012
More informationTrading Partner Labels Using Linear and 2D Symbols SPEC: AIAG B-10 Version: (06/04)
Trading Partner Labels Using Linear and 2D Symbols SPEC: AIAG B-10 Version: (06/04) Trading Partner Labels 1 Table of Contents Table of Contents... 2 Document Control... 3 Transport Handling Unit Labels...
More informationIMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
More informationEVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
More informationB&R guidelines for delivery of goods Version 02
B&R guidelines for delivery of goods Version 02 age 1/10 Table of contents 1 Brief summary... 3 2 Applicability... 3 3 Glossary... 3 3.1 Delivery... 3 3.2 Delivery item... 3 3.3 ackaging unit... 3 3.4
More informationASI/81350 PPAI/158378 UPIC: POLYPAK- SAGE
the WE GET CARRIED AWAY 2014 REGAL line ASI/81350 PPAI/158378 UPIC: POLYPAK- SAGE 50799 Table of Contents 4 Full Color Process Printing 19 I mported Clip Loop Handle 5 Flush Top Die Cut Handle 20 I mported
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationHT6P20X Series 2 24 OTP Encoder
2 24 OTP Encoder Features Operating voltage: 2V~12V Low power consumption Built-in oscillator needs only 5% resistor 2/4 data selectable 2 24 maximum address and data codes Easy interface with an RF or
More informationMD5-26 Stacking Blocks Pages 115 116
MD5-26 Stacking Blocks Pages 115 116 STANDARDS 5.MD.C.4 Goals Students will find the number of cubes in a rectangular stack and develop the formula length width height for the number of cubes in a stack.
More informationST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS
5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs
More informationTop Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationTLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11)
TOSHIBA LED Lamps TL(RK,RMK,SK,OK,YK)C(T) TLRKC(T), TLRMKC(T), TLSKC(T), TLOKC(T), TLYKC(T) Panel Circuit Indicators Unit: mm Surface-mount devices.2 (L) mm 2.8 (W) mm.9 (H) mm Flat-top type InGaAlP LEDs
More informationPreamplifier Circuit for IR Remote Control
Product is End of Life June-216 and Replaced by New (#82748) Preamplifier Circuit for IR Remote Control (please see PCN OMV-877-215, datasheet is valid until 3 th June 216) MECHANICAL DATA Pinning: 1,
More informationTN0991 Technical note
Technical note Description of WLCSP for STMicroelectronics EEPROMs and recommendations for use Introduction This document describes the 5 and 8-bump WLCSPs (wafer level chip size package) used for STMicroelectronics
More informationHarvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control DESCRIPTION 2296 The is designed for use in an IR receiver application together with a photo pin diode. It is a sophisticated receiver concept that is very sensitive
More information950 series SILICON LOW VOLTAGE HYPERABRUPT VARACTOR DIODES ZV950V2, ZV952V2, ZV953V2, ZMDC953, FSD273. Device Description. Features.
SILICON LOW VOLTAGE HYPERABRUPT VARACTOR DIODES 950 series ZV950V2, ZV952V2, ZV953V2, ZMDC953, FSD273 Device Description A range of silicon varactor diodes for use in frequency control and filtering. Featuring
More informationTOLEDO MOLDING & DIE, INC.
TOLEDO MOLDING & DIE, INC. Supplier labeling specifications print date: 4/12/2007 page 1 of 9 Owner: Jose Gomez Objective: The objective of this document is to provide a labeling standard to TMD s supply
More informationHandling, soldering & mounting instructions
Tri-axial acceleration sensor SMB380 SMB380 Order code 0 273 141 006 Package type QFN Release version 1.0 Release date 2007-07-23 Notes Rev. 1.0 Specifications are Page subject 1 to change without notice
More informationFRED MEYER: Price Tickets & Carton Barcodes FRED MEYER VENDORS:
Page 1 FRED MEYER VENDORS: We have recently had several questions regarding the requested information for the carton labels. Please read the below to answer any questions that you might have. 1) Where
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationNARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
More informationPitney Bowes Bar Code Standard Revision Summary As of March 2003
Pitney Bowes Bar Code Standard Revision Summary As of March 2003 Pitney Bowes has two corporate standards for Bar Code implementation: B1385: Bar Code Symbology; and, : Bar Code Labels for Shipping/Receiving
More informationLogistic Manual BMZ GmbH
Logistic Manual BMZ GmbH Requirements on suppliers The Company Batterien Montage Zentrum GmbH (BMZ) Am Sportplatz 28 30 63791 Karlstein am Main Germany Tel. +49 (0)6188 9956-0 Fax +49 (0)6188 9956-900
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More information3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
More informationSPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
More informationSurface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
More informationDM74LS00 Quad 2-Input NAND Gate
DM74LS00 Quad 2-Input NAND Gate General Description This device contains four independent gates each of which performs the logic NAND function. Ordering Code: August 1986 Revised March 2000 Order Number
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
More informationSC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
More informationData Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationLED Module SPECIFICATION. LED Module for Modular Platform Series. LED Platform Module with Fin
DATE OF ISSUE : March, 2015 1/9 SPECIFICATION for Modular Platform Series Model Name Type Parts No. LED Platform Module with Fin CRI min. 70, 5000K, Flux Rank 3, Type Ⅱ-Short, 351Z Ceramic SL-P7R2E32SZWW
More informationBAS70 series; 1PS7xSB70 series
BAS70 series; PS7xSB70 series Rev. 09 January 00 Product data sheet. Product profile. General description in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationChapter 2 EDI TECHNOLOGY
Chapter 2 EDI TECHNOLOGY DL Group is committed to supporting the Universal Product Code (UPC), Electronic Data Interchange (EDI), Voluntary Interindustry Commerce Standards (VICS) and the Uniform Code
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More informationHarvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
More informationSTP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V
More informationUnited States Standards for Grades of Lettuce
United States Department of Agriculture Agricultural Marketing Service Fruit and Vegetable Division United States Standards for Grades of Lettuce Fresh Products Branch Effective December 1, 1975 (Reprinted
More informationTEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
More informationProduce Traceability Initiative Best Practices for Formatting Hybrid Pallet Labels
Produce Traceability Initiative Best Practices for Formatting Hybrid Pallet Labels About this Best Practice Guideline (Revision 2.6) Best practices are generally accepted, informally standardized techniques,
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems 1 2 MECHNICAL DATA Pinning for TSOP44.., TSOP48..: 1 = OUT, 2 = GND, 3 = V S Pinning for TSOP22.., TSOP24..: 1 = OUT, 2 = V S, 3 = GND 3 16672 FEATURES Improved
More information1 W High Power LED TPLG-MR7171R-H11-0L0M. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationSuggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages
APPLICATION NOTE Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages Introduction This Application Note provides sample PCB land pattern
More informationDATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 February 1991 FEATURES Low distortion 16-bit dynamic range 4 oversampling possible Single 5 V power supply No external components required
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved
More informationBarcode Label Specification
This document provides Metaldyne s guidelines on supply partner labels to be used for identifying material shipped to Metaldyne production facilities. The labels will be used to tie the contents of the
More informationGrade 8 Mathematics Geometry: Lesson 2
Grade 8 Mathematics Geometry: Lesson 2 Read aloud to the students the material that is printed in boldface type inside the boxes. Information in regular type inside the boxes and all information outside
More informationSTPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
More information