SELECTION GUIDE. Contrast scanners. Colour sensors. from page 300 onwards. Scanning ranges: 10
|
|
|
- Roderick Burns
- 7 years ago
- Views:
Transcription
1 SELECTION GUIDE Contrast scanners Operating principle Products and typ. scanning ranges [mm] KRTG 8 Scanning ranges: 10 from page 288 onwards Contrast scanners detect markings, even those with only slight contrast with respect to the background, at very high processing speeds. Automatic adaptation of the wavelength allows the slightest changes in grey value to be detected, independent of the colour combination of the marking and background. Features KRTM 20 Scanning ranges: 12 / 20 / 50 KRTG 20 Scanning ranges: 12 / 20 / 50 from page 288 onwards from page 288 onwards Multicolour and green-light contrast scanners available Detection of the slightest differences in contrast by means of highly dynamic transmitter regulation Various teach-in variants for optimum process integration Special functions can be enabled via a keyboard Temperature compensation ensures stable scanning over a long operating period We reserve the right to make changes Abgrenzung_Spezialsensoren_GB.fm Colour sensors Operating principle Colour sensors detect the colour of an object by comparing with a taught-in reference colour. They generate a switching signal when both colours match within a specified tolerance range. Features Multicolour LED transmitter Colour detection with incident light and transmitted light Detection of different colours via 2/4 digital outputs or via an analog output Up to four reference colours can be stored Programming via teach-in Analogue evaluation with transmitter switchover Products and typ. scanning ranges [mm] CRT 20B Scanning ranges: 12.5 / 60 CRTM 20 Scanning ranges: 12 / 20 / 50 CRT 442 Scanning ranges: 12.5 from page 300 onwards from page 300 onwards from page 300 onwards 286 Leuze electronic GmbH + Co. KG
2 Luminescence scanners Operating principle SPECIAL SENSORS Products and typ. scanning ranges [mm] Standard Measuring LRT 8 Scanning ranges: 0 50 from page 306 onwards Ultrasonic A luminescent material which is illuminated with blue light reflects light with a longer wavelength. This effect, combined with appropriate filtering, makes it possible to detect luminescent markings or materials, even on optically critical surfaces. LRT 40 Scanning ranges: 5 20 LRT 440 Scanning ranges: from page 306 onwards from page 306 onwards Forked Features UV LED transmitter Detection of visible and invisible luminescent material Luminescence scanners in various housings Filtering options PNP, NPN and analog outputs Special Ex Protective Light Curtains Fibre Optic +49 (0) info@leuze.de 287 AS-interface
3 OVERVIEW OF CONTRAST SCANNERS Slit and hole recognition Mark detection Dimensioned drawing KRTG 8 see 8 Series standard sensors on page 40. Dimensioned drawing KRTG 20, KRTM 20 Further details can be found in the respective data sheet. We reserve the right to make changes KRT_Overview_GB.fm A B C D E Vertical light spot orientation Optical axis Scanning range Head Front 288 KRT Page 288 CRT Page 300 Leuze electronic GmbH + Co. KG LRT Page 306
4 KRT 8 / 20 Standard Contrast scanners Scanning ranges Page Green-light contrast scanner KRTG mm 290 Measuring Green-light contrast scanner KRTG mm 290 Multi-colour contrast scanner KRTM mm 294 Ultrasonic Additional products - special sensors: Colour sensors CRTM 20, CRT 20B, CRT Luminescence scanners LRT 8, LRT 40, LRT Common technical data Electrical data Operating voltage U B 10 30/12 30VDC Residual ripple 15% of U B Open-circuit current 35mA/ 60mA Signal voltage high/low (U B -2V)/ 2V Indicators Green LED Ready, teach-in Yellow LED Obj. detected, teach-in Mechanical data Housing Metal Features Interchangeable objectives with scanning ranges of 12mm, 20mm and 50mm Models with memory for up to 128 different labels Analog 6.25μs and digital 20μs high-speed interface Automatic amplifier adaptation for shiny and dull cut marks Forked Special Fibre Optic Optics cover Glass Weight ( 8/ 20) 70g/300g Environmental data Ambient temperature (operation) 8: -40 C +60 C 20: -25 C +60 C U L US C LISTED Light Curtains VDE safety class Protection class IP 67 (LKRTG 8: IP 65) II Optical Sensor ABCs Contrast scanners Page 411 LED class 1 acc. to EN Standards applied IEC , UL 508 Protective Mounting systems for this series can be found from page 375 onwards Ex (0) info@leuze.de 289 AS-interface
5 GREEN-LIGHT CONTRAST SCANNERS Part description Part No.: Scanning range Operating voltage Switching frequency Light source Light spot Output Green light contrast scanners KRTG 8 / S ± 1mm 10 30VDC 8kHz Green light 2.0 x 2.0mm 2 1x PNP 1xNPN KRTG 20 M/P S ± 1mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 PNP KRTG 20 M/P S ± 2mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 PNP KRTG 20 M/P S ± 2mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 PNP KRTG 20 M/N S ± 2mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 NPN KRTG 20 M/N S ± 2mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 NPN KRTG 20 M/P S ± 5mm 1) 12 30VDC Green light 4.0 x 2.0mm 2 PNP 1) Other scanning ranges of 12 ± 1mm, 20 ± 2mm or 50 ± 5mm are possible by changing the objective. We reserve the right to make changes KRTG_8_20_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC b K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC c OB 12 - KRT 20 Objective for 12mm scanning range d OB 20 - KRT 20 Objective for 20mm scanning range e OB 50 - KRT 20 Objective for 50mm scanning range f WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
6 KRTG 8 / 20 Green light contr. scanners Standard Connection Option Accessories Ultrasonic Forked Special Protective Light Curtains Fibre Optic Measuring M12 connector 1, 4, 5, 7 a, b M12 connector 2, 4, 5, 6, 7 a, b, c, d, e, f M12 connector 2, 4, 5, 6, 7 a, b, c, d, e, f M12 connector 3, 4, 5, 6, 7 a, b, c, d, e, f M12 connector 2, 4, 5, 6, 7 a, b, c, d, e, f M12 connector 3, 4, 5, 6, 7 a, b, c, d, e, f Optical Sensor ABCs Contrast scanners Page 411 Connection types Page 414 Outputs Page 414 M12 connector 2, 4, 5, 6, 7 a, b, c, d, e, f Electrical connection Options 1 Static teach-in via rotary switch 2 Static teach-in on mark and background via teach button/line 3 Static teach-in on background via teach button/line 4 Switchable pulse stretching 5 Light/dark switching 6 Synchronous input for measurement start/stop Ex 7 UL approval (0) info@leuze.de 291 AS-interface
7 MULTICOLOUR CONTRAST SCANNERS Part description Part No.: Scanning range 1) Operating voltage Switching frequency Light source Light spot Output RGB multicolour contrast scanners KRTM 20 M/P S ± 1mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/P S ± 1mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/P S ± 1mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/N S ± 1mm 12 30VDC 4.0 x 1.2mm 2 NPN KRTM 20 M/N S ± 1mm 12 30VDC 4.0 x 1.2mm 2 NPN KRTM 20 M/N S ± 1mm 12 30VDC 4.0 x 1.2mm 2 NPN 1) Other scanning ranges of 20 ± 2mm or 50 ± 5mm are possible by changing the objective. We reserve the right to make changes KRTM_20_1_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC b K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC c OB 12 - KRT 20 Objective for 12mm scanning range d OB 20 - KRT 20 Objective for 20mm scanning range e OB 50 - KRT 20 Objective for 50mm scanning range f WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
8 KRTM 20 Multicolour contr. scanner Standard Connection Option Accessories Ultrasonic Forked Special Light Curtains Fibre Optic Measuring M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f Optical Sensor ABCs Contrast scanners Page 411 Connection types Page 414 Outputs Page 414 Electrical connection Options 1 Static teach-in via teach button/line 2 Dynamic teach-in via teach button/line 3 Light/dark mark preselection via L/D input 4 Cut-marking system with memory for 128 data sets 5 Freely programmable via protocol interface (buttons disabled) Protective 6 Switchable pulse stretching 7 Light/dark switching 8 Synchronous input for measurement start/stop 9 UL approval Ex (0) info@leuze.de 293 AS-interface
9 MULTICOLOUR CONTRAST SCANNERS Part description Part No.: Scanning range 1) Operating voltage Switching frequency Light source Light spot Output RGB multicolour contrast scanners KRTM 20 M/P S x 1.2mm 2 PNP KRTM 20 M/P S x 1.2mm 2 PNP KRTM 20 M/P S x 1.2mm 2 PNP KRTM 20 M/N S x 1.2mm 2 NPN KRTM 20 M/N S x 1.2mm 2 NPN KRTM 20 M/N S x 1.2mm 2 NPN 1) Other scanning ranges of 12 ± 1mm or 50 ± 5mm are possible by changing the objective. We reserve the right to make changes KRTM_20_2_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC b K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC c OB 12 - KRT 20 Objective for 12mm scanning range d OB 20 - KRT 20 Objective for 20mm scanning range e OB 50 - KRT 20 Objective for 50mm scanning range f WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
10 KRTM 20 Multicolour contr. scanner Standard Connection Option Accessories Ultrasonic Forked Special Light Curtains Fibre Optic Measuring M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f Optical Sensor ABCs Contrast scanners Page 411 Connection types Page 414 Outputs Page 414 Electrical connection Options 1 Static teach-in via teach button/line 2 Dynamic teach-in via teach button/line 3 Light/dark mark preselection via L/D input 4 Cut-marking system with memory for 128 data sets 5 Freely programmable via protocol interface (buttons disabled) Protective 6 Switchable pulse stretching 7 Light/dark switching 8 Synchronous input for measurement start/stop 9 UL approval Ex (0) info@leuze.de 295 AS-interface
11 MULTICOLOUR CONTRAST SCANNERS Part description Part No.: Scanning range 1) Operating voltage Switching frequency Light source Light spot Output RGB multicolour contrast scanners KRTM 20 M/V S x 1.2mm 2 Analog/mA PNP KRTM 20 M/V S Analog/mA 4.0 x 1.2mm 2 PNP KRTM 20 M/V S x 1.2mm 2 Analog/mA PNP KRTM 20 M/V S Analog/mA 4.0 x 1.2mm 2 PNP KRTM 20 M/V S x 1.2mm 2 Analog/mA PNP KRTM 20 M/V S Analog/mA 4.0 x 1.2mm 2 NPN KRTM 20 M/V S x 1.2mm 2 Analog/mA NPN KRTM 20 M/V S Analog/mA 4.0 x 1.2mm 2 NPN 1) Other scanning ranges of 12 ± 1mm or 50 ± 5mm are possible by changing the objective. We reserve the right to make changes KRTM_20_3_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC b K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC c OB 12 - KRT 20 Objective for 12mm scanning range d OB 20 - KRT 20 Objective for 20mm scanning range e OB 50 - KRT 20 Objective for 50mm scanning range f WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
12 KRTM 20 Multicolour contr. scanner Standard Connection Option Accessories Ultrasonic Forked Special Measuring M12 connector 1, 6, 7, 9 a, b, c, d, e, f M12 connector 1, 4, 6, 7, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f M12 connector 5, 9 a, b, c, d, e, f M12 connector 1, 6, 7, 9 a, b, c, d, e, f Optical Sensor ABCs Contrast scanners Page 411 Connection types Page 414 Outputs Page 414 M12 connector 2, 6, 7, 9 a, b, c, d, e, f Electrical connection M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f Fibre Optic Options 1 Static teach-in via teach button/line Light Curtains 2 Dynamic teach-in via teach button/line 3 Light/dark mark preselection via L/D input 4 Cut-marking system with memory for 128 data sets 5 Freely programmable via protocol interface (buttons disabled) Protective 6 Switchable pulse stretching 7 Light/dark switching 8 Synchronous input for measurement start/stop 9 UL approval Ex (0) info@leuze.de 297 AS-interface
13 MULTICOLOUR CONTRAST SCANNERS Part description Part No.: Scanning range 1) Operating voltage Switching frequency Light source Light spot Output RGB multicolour contrast scanners KRTM 20 M/P S ± 5mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/P S ± 5mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/P S ± 5mm 12 30VDC 4.0 x 1.2mm 2 PNP KRTM 20 M/N S ± 5mm 12 30VDC 4.0 x 1.2mm 2 NPN KRTM 20 M/N S ± 5mm 12 30VDC 4.0 x 1.2mm 2 NPN KRTM 20 M/N S ± 5mm 12 30VDC 4.0 x 1.2mm 2 NPN 1) Other scanning ranges of 12 ± 1mm or 20 ± 2mm are possible by changing the objective. We reserve the right to make changes KRTM_20_4_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC b K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC c OB 12 - KRT 20 Objective for 12mm scanning range d OB 20 - KRT 20 Objective for 20mm scanning range e OB 50 - KRT 20 Objective for 50mm scanning range f WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
14 KRTM 20 Multicolour contr. scanner Standard Connection Option Accessories Ultrasonic Forked Special Light Curtains Fibre Optic Measuring M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f M12 connector 1, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 6, 7, 8, 9 a, b, c, d, e, f M12 connector 2, 3, 6, 7, 9 a, b, c, d, e, f Optical Sensor ABCs Contrast scanners Page 411 Connection types Page 414 Outputs Page 414 Electrical connection Options 1 Static teach-in via teach button/line 2 Dynamic teach-in via teach button/line 3 Light/dark mark preselection via L/D input 4 Cut-marking system with memory for 128 data sets 5 Freely programmable via protocol interface (buttons disabled) Protective 6 Switchable pulse stretching 7 Light/dark switching 8 Synchronous input for measurement start/stop 9 UL approval Ex (0) info@leuze.de 299 AS-interface
15 OVERVIEW OF COLOUR SENSORS Dimensioned drawing CRTM 20 see special sensors, contrast scanner KRT 20 on page 288. Dimensioned drawing CRT 20B CRT 442 We reserve the right to make changes CRT_Overview_GB.fm A B C D Display elements Control buttons Objective 90 turning connector Further details can be found in the respective data sheet. KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
16 CRT(M) 20(B) / 442 Standard Colour sensors Colour sensors - analog output CRTM 20 Scanning ranges Page 12 / 20 / 50mm 302 Measuring Colour sensors - digital output CRT 442, CRT 20B 12.5 / 60mm 302 Additional products - special sensors: Contrast scanners KRTM 20, KRTG 20, (L)KRTG Ultrasonic Luminescence scanners LRT 8, LRT 40, LRT Common technical data Electrical data Operating voltage U B 10 30/12 30VDC Residual ripple 15% of U B Open-circuit current 80mA/ 60mA Signal voltage high/low (U B -2V)/ 2V Indicators Green LED Ready to operate Yellow LED Switching state/error Orange LED (CRT 448 ) Teach-in Mechanical data Housing ABS / metal Features Interchangeable objective for scanning ranges from 12mm to 50mm Simple assignment of colours with teach function Reversible transmitter colours for sensitive measurement tasks Analog 6.25μs high-speed interface Analog or digital switching outputs Forked Special Fibre Optic Optics cover Glass Environmental data Weight ( 448/ 20) Ambient temperature (operation) 11g/125g/300g -10 C +55 C 20: -25 C +55 C U L US C LISTED Optical Sensor ABCs Light Curtains Protection class IP 67 Colour sensors Page 411 LED class 1 acc. to EN Standards applied IEC , UL 508 Protective Mounting systems for this series can be found from page 376 onwards Ex (0) info@leuze.de 301 AS-interface
17 COLOUR SENSORS Part description Part No.: Scanning range Operating voltage Switching frequency Light source Light spot Output Colour sensors with analog output CRTM 20 M/V S ± 5mm 1) 12 30VDC 4.0 x 1.2mm 2 Analog/mA PNP CRTM 20 M/V S ± 5mm 2) 12 30VDC Analog/mA 10.0 x 2.0mm 2 PNP Colour sensors with digital output CRT 20B M/P S mm 10 30VDC 6kHz 13.0 x 13.0mm 2 1x PNP CRT 20B M/P S mm 10 30VDC 3.5kHz 13.0 x 13.0mm 2 4x PNP CRT 20B M/N S mm 10 30VDC 6kHz 13.0 x 13.0mm 2 1xNPN CRT 20B M/N S mm 10 30VDC 3.5kHz 13.0 x 13.0mm 2 4xNPN CRT 20B M/P S mm 10 30VDC 6kHz 4.0 x 2.0mm 2 1x PNP CRT 20B M/P S mm 10 30VDC 3.5kHz 4.0 x 2.0mm 2 4x PNP We reserve the right to make changes CRT_1_GB.fm CRT 20B M/N S CRT 20B M/N S mm 10 30VDC 6kHz 12.5mm 10 30VDC 3.5kHz 4.0 x 2.0mm 2 1xNPN 4.0 x 2.0mm 2 4xNPN Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC b K-DM12A-8P-5m-PUR Connection cable 5000mm, M12 axial, 8-pin, PUR c OB 12 - KRT 20 Objective for 12mm scanning range d WZ - OB - KRT 20 Tool for changing objectives KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
18 CRT(M) 20(B) Colour sensors Standard Connection Option Accessories Ultrasonic Forked Measuring M12 connector 1, 4 a, c, d M12 connector 1, 4 a, c, d M12 connector 2, 4 a M12 connector 3, 4 b M12 connector 2, 4 a Optical Sensor ABCs Colour sensors Page 411 Connection types Page 414 Outputs Page 414 Special M12 connector 3, 4 b Electrical connection M12 connector 2, 4 a Fibre Optic M12 connector 3, 4 b M12 connector 2, 4 a Light Curtains M12 connector 3, 4 b 1) Other scanning ranges of 12 ± 5mm or 50 ± 5mm are possible by changing the objective. 2) Other scanning ranges of 12 ± 5mm or 20 ± 5mm are possible by changing the objective. Options 1 Analog output, RGB remote changeover via line Protective 2 Colour sensor with 1 channel, teach-in of reference colour 3 Colour sensor with 4 channels, teach-in of reference colour 4 UL approval Ex (0) info@leuze.de 303 AS-interface
19 COLOUR SENSORS Part description Part No.: Scanning range Operating voltage Switching frequency Light source Light spot Output Colour sensors with digital output CRT 442 K/P S ± 2mm 24VDC ± 20% 1.5kHz 1.5 x 6.5mm 2 1x PNP CRT 442 K/N S ± 2mm 24VDC ± 20% 1.5kHz 1.5 x 6.5mm 2 1xNPN We reserve the right to make changes CRT_2_GB.fm Accessories / connection cables More accessories can be found from page 364 onwards Part No. Designation Features a K-DM12W-4P-2m-PVC Connection cable 2000mm, M12 angular, 4-pin, PVC b K-DM12A-4P-2m-PVC Connection cable 2000mm, M12 axial, 4-pin, PVC c K-DM12W-4P-5m-PVC Connection cable 5000mm, M12 angular, 4-pin, PVC d K-DM12A-4P-5m-PVC Connection cable 5000mm, M12 axial, 4-pin, PVC e K - D M12W - 4P - 10m - PVC Connection cable 10000mm, M12 angular, 4-pin, PVC f K - D M12A - 4P - 10m - PVC Connection cable 10000mm, M12 axial, 4-pin, PVC KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
20 CRT 442 Colour sensors Standard Connection Option Accessories Protective Light Curtains Ultrasonic Special Fibre Optic Forked Measuring M12 connector 1, 2 a, b, c, d, e, f M12 connector 1, 2 a, b, c, d, e, f Optical Sensor ABCs Colour sensors Page 411 Connection types Page 414 Outputs Page 414 Electrical connection Ex Options 1 Teach-in of reference colour 2 UL approval (0) info@leuze.de 305 AS-interface
21 OVERVIEW OF LUMINESCENCE SCANNERS Dimensioned drawing LRT 8 see 8 Series standard sensors on page 40. Dimensioned drawing LRT 440 / LRT 440 / LRT 40 / We reserve the right to make changes LRT_Overview_GB.fm A B C D E F Indicator diode Transmitter Receiver Optical axis Sensitivity adjustment Control button panel Further details can be found in the respective data sheet. LRT 40 / KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
22 LRT 8 / 40 / 440 Standard Luminescence scanners Scanning ranges Page Luminescence scanner LRT mm / 0 100mm 308 Measuring Luminescence scanner LRT mm 308 Luminescence scanner LRT mm 308 Ultrasonic Additional products - special sensors: Contrast scanners KRTM 20, KRTG 20, (L)KRTG Colour sensors CRTM 20, CRT 20B, CRT Common technical data Electrical data Operating voltage U B 10 30VDC Residual ripple 15% of U B Open-circuit current 35mA/ 4mA/ 40mA Signal voltage high/low (U B -2V)/ 2V Indicators Yellow LED Obj. detected/reflection Mechanical data Housing Metal Optics cover Glass Features Scanning ranges up to 150mm Among others, luminescence scanners in compact housings Filter possibility for distinguishing between different-coloured luminescences Analog sensitivity adjustment via connector interface Forked Special Fibre Optic Weight ( 8/ 40/ 440) 70g/250g/250g Environmental data Ambient temperature (operation) Protection class IP C +60 C U L US C LISTED 1) Light Curtains Standards applied IEC , UL 508 1) Optical Sensor ABCs Luminescence scanners Page 411 Protective 1) LRT 8 only Mounting systems for this series can be found from page 376 onwards Ex (0) info@leuze.de 307 AS-interface
23 LUMINESCENCE SCANNERS Part description Part No.: Scanning range Operating voltage Switching frequency Light source Output Luminescence scanners LRT8/ S mm 10 30VDC 1500Hz UV light, LED class 1M 1x PNP 1xNPN LRT8/ S mm 10 30VDC 1500Hz UV light, LED class 1M 1x PNP 1xNPN LRT 8 / S mm 10 30VDC 1500Hz UV light, LED class 1M 1x PNP 1xNPN LRT40/ mm 10 30VDC 2000Hz UV light, LED class 1 PNP LRT40/ mm 10 30VDC 2000Hz UV light, LED class 1 PNP LRT 40 / , mm 10 30VDC 2000Hz UV light, LED class 1 PNP LRT 40 / , mm 10 30VDC 2000Hz UV light, LED class 1 PNP LRT 440 / S mm 10 30VDC 600Hz UV light, laser class 3R 1x PNP 1xNPN We reserve the right to make changes LRT_8_40_440_GB.fm LRT 440 / S Accessories / connection cables 0 50mm 10 30VDC 600Hz Part No. Designation Features UV light, laser class 1 Analog/mA 1xPNP 1xNPN More accessories can be found from page 364 onwards a K-DM12W-4P-2m-PVC Connection cable 2000mm, M12 angular, 4-pin, PVC b K-DM12A-4P-2m-PVC Connection cable 2000mm, M12 axial, 4-pin, PVC c K-DM12W-4P-5m-PVC Connection cable 5000mm, M12 angular, 4-pin, PVC d K-DM12A-4P-5m-PVC Connection cable 5000mm, M12 axial, 4-pin, PVC e K-DM12W-5P-5m-PVC Connection cable 5000mm, M12 angular, 5-pin, PVC f K-DM12A-5P-5m-PVC Connection cable 5000mm, M12 axial, 5-pin, PVC KRT Page 288 CRT Page 300 LRT Page Leuze electronic GmbH + Co. KG
24 LRT 8 / 40 / 440 Luminescence scanners Standard Connection Option Accessories Ultrasonic Forked Special Measuring M12 connector 1, 4, 8, 9 e, f M12 connector 1, 4, 5, 6, 8, 9 e, f M12 connector 1, 4, 5, 6, 8, 9 e, f Cable, 2m 1, 6 Cable, 2m 1, 4, 5, 6, 7 Cable, 5m 2, 6 Optical Sensor ABCs Luminescence scanners Page 411 Connection types Page 414 Outputs Page 414 Cable, 5m 2, 4, 5, 6, 7 Electrical connection M12 connector 3, 5, 6 a, b, c, d Fibre Optic M12 connector 3, 5, 6 e, f Options 1 Sensitivity adjustment via potentiometer Light Curtains 2 Sensitivity adjustment via remote calibration 3 Sensitivity adjustment in 256 levels via buttons 4 For detecting red luminescence 5 For detecting blue/colourless luminescence Protective 6 For detecting yellow/yellow-green luminescence 7 For detecting orange luminescence 8 Light/dark switching 9 UL approval Ex (0) info@leuze.de 309 AS-interface
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
Electrical connection
(I)GSU 14B Ultrasonic Label Fork Dimensioned drawing Part No. 501 09234 4mm 12-30 V DC 4 m/s Ultrasonic forked sensor for universal application Large mouth width, hence also suitable for booklets or fan-fold
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
sensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
LUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
W150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
Photoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
Sturdy aluminium housing, anodized in blue Female connector for optical fiber (please order optical fiber separately) Mounting holes
SI-COLO Series SI-COLO2-LWL-HAMP-COL4 - Big measuring range: typ. 25 mm... 40 mm (with optical fiber and attachment optics KL-14 or KL-17) - Large assortment of optical fibers available (reflected or transmitted
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
Barcode positioning systems BPS 8, BPS 34/37 Innovations that truly move you forwards.
Barcode positioning systems BPS 8, BPS 34/37 Innovations that truly move you forwards. PRODUCT INFORMATION Flexible, tolerant and millimetre precision. The Leuze electronic barcode positioning system.
photoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
L-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
BOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
Digital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
W 18-3: Incorporated application Know-how, expanded functionality, high level of equipment availability
Photoelectric proximity switches, FGS Photoelectric reflex switches Through-beam photoelectric switches W -: Incorporated application Know-how, expanded functionality, high level of equipment availability
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
Measuring Sensors PRODUCT DESCRIPTION
Measuring Sensors PROUT SRIPTION ontents: Optical distance sensors - Overview and advantages Special features of the optical distance sensors Sensor selection table ata sheets of the optical distance sensors
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
W 160: Miniature series for optimum solutions
W 0 Photoelectric switches Photoelectric proximity switches, BGB Photoelectric proximity switches, energetic W 0: iniature series for optimum solutions Photoelectric reflex switches Through-beam photoelectric
intelligent solutions
Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology
W 27-2: The photoelectric switch series with expanded possibilities
W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres
technical data (according to IEC 60947-5-2)
Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise
W 260: Standard photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic Photoelectric reflex switches W 0: Standard photoelectric switch series for a broad range of
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Mounting holes. (threaded M4) Switching state indication (5 yellow LEDs)
SI-COLO Series SI-COLO4-LWL-SP (12 bit A/D conversion) - Big measuring range: typ. 2 mm... 25 mm (with optical fiber bundle Ø 2.5 mm or gap 6 mm x 1 mm) - Large assortment of optical fibers available -
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
W 2: Subminiature photoelectric switch series: extremely small and extremely strong
Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches Through-beam photoelectric switches W : Subminiature photoelectric switch series:
LM10. Micro Laser Displacement Sensor. The LM10 makes laser sensors super easy to use! New circuitry lowers costs
857 Micro Sensor General terms and conditions... P.1 Related Information Glossary of terms / General precautions... P.1019 / P.1027 Sensor selection guide... P.11~ / P.833~ About laser beam... P.1025 ~
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Barcode Reader Series BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M A T I O N Barcode Reader Series BCL 31, BCL 32, BCL 34 BCL 31, BCL 32 and BCL 34: Barcode readers for universal use in conveyor and storage technology. 3 models: numerous advantages.
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
Color Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
W 36: Mastering complex tasks reliably
Lichtschranken W Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches W : astering complex tasks reliably Through-beam photoelectric switches for temperatures
W160T: With the smallest LED light spot
W0T: With the smallest LED light spot BGS Photoelectric proximity switches Photoelectric proximity switches mark sensor Photoelectric proximity switches energetic Photoelectric reflex switches SSystem
Preset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
MAIN CATALOGUE MAKING SENSE OF TECHNOLOGY
MAIN CATALOGUE MAKING SENSE OF TECHNOLOGY MAKING SENSE OF TECHNOLOGY TABLE OF CONTENTS Corporate Profile Remote Photoelectric Systems Self-Contained Photoelectric Systems Self-Contained Light Curtain Systems
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
RLS Series RLS-GD-15. Design. RLS-GD Series Gloss Detection Sensors. Accessories: Product name: RLS-GD-15 RLS-GD-15-HP (High Power)
RLS Series RLS-GD-15 Gloss Detection - Insensitive to outside light due to clocked white light - 2 receivers (15, 60 ) and reference - Storing of up to 31 gloss degrees - Tolerance adjustable for each
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
Multifunction devices
devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
Instruction Sheet ACS-101. General Description. Specifications. Amplified Broadband UHF Combiner-Splitter. Overall. Antenna Splitter.
ACS-101 Amplified Broadband UHF Combiner-Splitter General Description The ACS-101 (Antenna Combiner Splitter 10 to 1) is an amplified and filtered broadband splitter-combiner. It allows up to 10 base stations
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option
REGISTRATION MARK SENSORS MARK EYE PRO 2 Miniature High-Resolution Registration Mark Sensor White LED AUTOSET Remote Setup Option Registration Mark Photoelectric Sensors 2-115 High-Resolution Registration
Automation System TROVIS 6400 TROVIS 6493 Compact Controller
Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general
SAFETY LIGHT CURTAINS
SAFETY LIGHT CURTAINS Overview Safety Light Curtains with resolutions that can be reduced guarantee protection and tolerate work equipment in the protective field The Safety Light Curtains comply with
Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Technical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
Product Information Sheet UH28CS-12kV Hi Pot Tester
Product Information Sheet UH28CS-12kV ETL Prüftechnik GmbH Telefon: +49 711 83 99 39-0 E-Mail: info@etl-prueftechnik.de Carl-Peters-Straße 23 D-70825 Korntal-Münchingen Telefax: +49 711 83 99 39-9 Internet:
COMPALARM AP GENERAL MAIN FEATURES
GENERAL The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It givesthe possibility of selecting the alarm sequence according with 0 x 0 mm cells, fitted with ultra bright
MAVO-MONITOR / MAVO-SPOT Instrument Set for Contact or Distant Measurements of Luminances
Operating Instructions MAVO-MONITOR / MAVO-SPOT Instrument Set for Contact or Distant Measurements of Luminances 15043 1/1.00 10 9 8 1 7 6 1 Display 2 Slider switch cd/m² segment test 3 ON/OFF switch 4
CLV440/442 Bar Code Scanner
PRODUCT INFORMATION CLV440/442 Bar Code Scanner Advanced line CLV440/442 Bar Code Scanner: Dynamic focus control Compact but powerful The bar code scanners CLV440/442 represent the newest members of our
Color sensors CS8, CS8-1
ONLINE DATA SHEET www.mysick.com Color sensors CS8, CS8-1 CS81-P1112 Color sensors CS8, CS8-1 Model Name > CS81-P1112 Part No. > 1028224 At a glance One (CS8-1) or four (CS8-4) colors can be saved 12.5
How To Use A Power Supply On A Powerline 2.2 (Ai)
KNX/EIB Product documentation Issue: 05.08.2010 629x1220 Push button sensor 3 comfort 1-gang Push button sensor 3 comfort 2-gang (1+1) Push button sensor 3 comfort 3-gang Push button sensor 3 comfort 4-gang
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
Panel Meters and Controllers Modular Panel Meter Type EDM 35
Panel Meters and Controllers Modular Panel Meter Type EDM 35 Modular digital panel meter, 3 1/2-digit Indicating or controlling current, voltage, resistance, temperature, tacho or frequency. Easy programming
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
How To Make An Ultrasonic Sensor
crm+ ultrasonic sensors Microsonic : TR Electronic: Tel: +49 231 975151-0 USA: 248-244-2280 Fax: +49 231 975151-51 Canada: 519-452-1233 www.microsonic.de www.trelectronic.com info@microsonic.de Description
SPECTRO Series SPECTRO-3-FIO-JR. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (cf. p. 11-13)
SPECTRO Series - Big working range: typ. mm... 5 mm (depends on the fiber optics used and attachment optics) - Big assortment of fiber optics available (reflected light or transmitted light operation)
Multi-function Card. 1 Description. 2 Technical data ESSK 107. 1.1 General. 1.2 Application example
Multi-function Card ESSK 107 semiconductor output stages 3 power outputs 1 current measurement input 2 analogue / digital inputs 1 digital input 5 adjustments power supply 12... 30 V 1 Description 1.1
Product Information Sheet UH36 Hi Pot Tester
Product Information Sheet UH36 ETL Prüftechnik GmbH Telefon: +49 711 83 99 39-0 E-Mail: info@etl-prueftechnik.de Carl-Peters-Straße 23 D-70825 Korntal-Münchingen Telefax: +49 711 83 99 39-9 Internet: www.etl-prueftechnik.de
Operating instructions Switching amplifier for fibre optics. OBF5xx 704876 / 00 08 / 2010
Operating instructions Switching amplifier for fibre optics OBF5xx 70876 / 00 08 / 00 Contents Preliminary note. Symbols used Functions and features. Applications Installation. Attaching the fibre optics
DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
Digital Pressure Measuring Instrument MDR480
Description The digital panel instrument MDR480 is designed to measure, display, and monitor pressures in industrial applications. The instrument is panel mounted with a front frame dimension of 96 mm
More Precision. optoncdt // Laser Triangulation Displacement Sensors
More Precision optoncdt // Laser Triangulation Displacement Sensors 2 optoncdt Laser triangulation sensors optoncdt - Non-contact and wear-free - Large stand off - Tiny measuring spot for small targets
crm+130/iu/tc/e Extract from our online catalogue: Current to: 2016-04-21
Extract from our online catalogue: crm+130/iu/tc/e Current to: 2016-04-21 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
Electronic Control Devices The European Product Catalogue 2007
FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
Power Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN
Power Supply and Indicator Unit Type 5024-1 Fig. 1 Type 5024-1 Mounting and Operating Instructions EB 9539 EN Edition October 2003 Application 1 Application The Type 5024-1 Power Supply and Indicator Unit
Appearance Type Setting distance Sensing area Model Remarks Camera with lighting. 34mm to 49mm 5mm x 4.9mm to 9mm x 8.
ZFX-C/25-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection via
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Plug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
Intelligent chart recorder for compressed air and gases. Measurement - control - indication - alarm - recording - evaluation
DS 500 Intelligent chart recorder for compressed air and gases Measurement - control - indication - alarm - recording - evaluation new Advantages at a glance: Clear layout: 7" colour screen with touch
Adjustment functions for both span and shift have been incorporated
SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8
Variable Preset Counter signo 723.1
Variable Preset Counter signo 723.1 Large, 6-digit, 14 mm high LED display Up/down counter with prescaler 2 presets, one programmable as trailing preset Easy direct selection by 2 function keys 2 relay
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
Resolution (divisions) Pre-wired Model E6F-AB3C 360P/R 2M *2 Pre-wired Connector E6F-AB3C-C 360P/R 2M *2 Model (2 m) NPN open collector BCD 360
Absolute 60-mm-dia. Rotary Encoder CSM DS_E_7_ Rugged Rotary Encoder Absolute model. External diameter of 60 mm. Resolution of up to 1,024 (10-bit). IP65 oil-proof protection. Strong shaft. Radial: 120
HDO700 P FIBRE OPTIC TRANSMITTER
Timo Rantanen 18.1.2011 1(5) HDO700 P FIBRE OPTIC TRANSMITTER HDO700 P is a high performance, extremely linear externally modulated 1550 nm transmitter for HDO fibre optic CATV link. This transmitter type
Contents. Document information
User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB
Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.
Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
Operating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004
Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical
Thru-Beam 80 to 320 mm 0.05 to 0.08 mm
Series 7069A Fiber Optics The 7069A coupled with the appropriate cable forms a fiber optic sensor controller system capable of detecting objects as small as 0.01mm dia. and color marks on backgrounds of
Smart Sensing Solutions Since 1954
Smart Sensing Solutions Since 1954 X-tremely High Speed Photoelectric Registration Sensor 800-237-0946 ttco.com 813-886-4000 Photoelectric Registration Sensor The SMARTEYE X-MARK TM is the fastest, most