Type RAD01 and RAD02. Ordering Key RAD 01. Product Description. Type Selection. Environmental Data. Electrical Data.

Size: px

Start display at page:

Download "Type RAD01 and RAD02. Ordering Key RAD 01. Product Description. Type Selection. Environmental Data. Electrical Data."

Darren Crawford
7 years ago
Views:

1 Motion Radar Sensor Type RAD01 and RAD02 K-Band radar sensor copatible with all types of autoatic doors. 3-D adjustable sensor position offers precise orientation of the activation pattern. Microprocessor technology filters out possible weather condition interferences IR reote controller can be added for easy adjustent UL325 approved RAD 01 RAD 02 Product Description Motion Radar Sensor is a digital uni or bidirectional otion sensor for trouble-free opening of all types of autoatic doors (sliding, swinging, folding, revolving, speed-doors, overhead doors, etc...), for pedestrian and civil applications. It can be adapted to every application without further accessories and can be controlled by an infrared reote controller. Mounting height up to 4 (13.12) also available in uni- or bidirectional ode to detect otion towards or away fro the device. Like ost of other icrowave detectors, equipped with planar flat antenna, Carlo Gavazzi Radar activates autoatic doors utilizing doppler shi effect for detecting oveents. Ordering Key RAD 01 Type Detection ode Type Selection Detection ode Ordering no. Bidirectional* RAD01 Uni & Bi-directional* RAD02 * Bidirectional: to detect otion towards and away fro the sensor Uni&Bidirectional: to detect otion towards and/or away fro the sensor. Electrical Data Frequency eitted (K-Band) GHz Radiated power <16dB EIRP Rated supply voltage 12 24VAC ±10% 12 24VDC +30% / -10% Main frequency 50 to 60HZ Power consuption < 1W (VA) Output Relay SPDT Rated Voltage 30VAC/DC Max switching current 1A (resistive load) Max switching power 30W (resistive load) Hold tie 9s (adjustable) Environental Data Teperature range Huidity Iunity Max. ounting height Protection degree Mechanical Data Housing Material Diensions WxHxD Weight Cable length Colour -20 C to +70 C (-4 F to +158 F) fro 0% to 90%RH R&TTE 1999/5/EC EMC 89/336/EEC 4 (13.12) IP54 Polycarbonate 118 x 80 x 53 (4.645 x x 2.086inch.) 150g (5.29oz) () Glossy/Translucid Black Specifications are subject to change without notice ( ) 1

2 Adjustents and Settings Manual Setting Device Reote Setting Device Reset to factory set Value (only by PCB buttons) By two buttons on ain PCB board. IR reote controller (optional) 1 - Restore PIN security code 2 - Restore all factory values Sensitivity 10 levels (1 to 10) It allows increent or decreent of detection field. Relay hold tie 10 levels ( to 9s) It fixes the aintenance s tie of the relay status. Uni-bidirectional ode Iunity detection It sets direction ode detection (only for uni-bidirectional device). Quasi-presence, Noral ode, Increased Iunity (Ipleented Relay status Active, Passive, by a digital filter) It prevents soe external noise as objects carried by wind, strong rain, etc. (only by PCB buttons) It perits to fix the relay status: norally open or close. Autoatic ode/ (only by IR reote controller) Peranently Open/Close. It perits to enable or disable noral sensor detection and set ON or OFF peranently relay output. AUTO / OPEN / CLOSE Security code (only by IR reote controller) 4-digit PIN access code It perits to lock or unlock optional reote controller keyboard setting. General Data Sensing field orientation Detection angle Vertical Lateral Sensing field shape bidirectional odel double echanical adjustent, lateral and vertical 0 to 90 in 15 increents +/- 30 in 7.5 increents By Sensor odule orientation Detecting area (ounting height 2.2 (h = 7.22)) Wide sensing field 4 (W) x 2 (D) (13.12 (W) x (D)) Narrow sensing field 2 (W) x (D) ( (W) x (D)) Detection ode Only bidirectional to detect otions towards and away fro sensor Uni & bidirectional to detect otions towards or/and away fro sensor Motion detecting speed /s ( fps) (easured in the sensor axis) Drilling Plan (inches) 100 (3.937 ) Ø 3 (1/8 ) Ø 3 (1/8 ) Ø 8 (5/16 ) Cable inlet 13 (11 ) 40 (75 ) Miniu Clearance 23 (0.905 ) Factory Default Value The device is set up in factory at the following default values: 1. Sensitivity 10 (ax level) 2. Relay hold tie 1 (in: sec) 3. Uni-Bidirectional Detection Mode Bi-directional (Uni-directional ode is available only for RAD 02) 4. Iunity detection Iunity: OFF 5. Relay Status: Passive 6. PIN security: block disabled (only for reote controller) At the first start up, the device loads the default values. 2 Specifications are subject to change without notice ( )

3 Electrical Connections Red LED IR Receiver Green LED Push Button DEC (-) Push Button INC (+) Planar Antenna Main Connector Relay NO contact Relay NC contact Relay Coon Supply Voltage 12 to 24 VAC/DC 12 to 24 VAC/DC Caution: Power on the radar by Class2 or LVE transforer. Do not power on the radar until all priary and secondary wiring is copleted. Diensions (inches) RAD 01 Lateral View Frontal View Top View RAD 02 Lateral View Frontal View Top View Specifications are subject to change without notice ( ) 3

4 Sensing field adjustents Mechanical sensor orientation Planar antenna vertical angle Planar antenna vertical angle Adjust the vertical position to obtain the vertical sensing field close or far fro the door. Lateral angle rotation -15 Lateral angle rotation 0 Lateral angle rotation 15 Adjust the lateral position to obtain the desired lateral angle sensing field. 4 Specifications are subject to change without notice ( )

5 RAD 01 Bidirectional Model Detection area vs Sensitivity value (vertical angle 45 ); vertical ount ode. Detection area vs Sensitivity value (vertical angle 45 ); horizontal ount ode S2 S4 S6 0 h = 2.2 h = S4 S6 0 h = 2.2 h = 7.22 RAD 02 Uni & Bidirectional Model Detection area vs Sensitivity value (vertical angle 15 ). Detection area vs Sensitivity value (vertical angle 45 ) S1 S h = 7.22 h = S1 S h = 2.2 h = Sensing field adjustent according to Sensitivity setting and ounting Height The sensing field area size (lobo) depends on the sensitivity paraeter setting and the radar ounting height. Note: S1... sensitivity levels setting. Accessory Type IR reote controller RAD 00 RC Door Status: OPEN: Locked open CLOSE: Locked closed AUTO: autoatic detection ode F RAD-00-RC DOOR OPEN CLOSE AUTO Nueric keys Hold tie setting Sensitivity setting Reote controller Lock TIME + SENS - SENS + TIME - PIN Change Reote controller Unlock PIN IMM QP Quasi Presence selection Detection ode (only for RAD 02 odel) Iunity selection Specifications are subject to change without notice ( ) 5

sensiq stainless steel The sensiq a spectacular appearance Max. reach: 20 m tangentially Angle of coverage: 300 Angle of aperture: 160

sensiq Motion Detector for Walls and Ceilings sensiq stainless steel The sensiq a spectacular appearance Reference-class infrared wall and ceiling sensor 300 coverage angle with 10 angle of aperture Reach