2.3 OPTICAL FIBER PRODUCTS 2.3. Optical Fiber Cable Assemblies

Transcription

1 OPTICL FIER PRODUCTS Optical Fiber Cable ssemblies OPTICL FIER CLE SSEMLIES MPO Trunk Cable ssemblies MT-RJ Cable ssemblies MT-RJ to SC Cable ssemblies MT-RJ to ST Cable ssemblies MT-RJ to LC Cable ssemblies SC Cable ssemblies SC to ST Cable ssemblies SC to LC Cable ssemblies ST Cable ssemblies LC Cable ssemblies Pigtail Plug and Jack (Single-Ended) Cable ssemblies MT-RJ Pigtail Jack (Single-Ended) Cable ssemblies MT-RJ Pigtail Plug (Single-Ended) Cable ssemblies SC Pigtail (Single-Ended) Cable ssemblies LC Pigtail (Single-Ended) Cable ssemblies MT-RJ Test Cable ssemblies MT-RJ OTDR Test ssemblies MT-RJ Loopbacks MT-RJ Test Kits LC Test Kits Chapter Summary complete line of cable assemblies for virtually any communications scenario Factory-terminated and tested Manufactured using quality MP NETCONNECT cable and connectors vailable in 50/125 μm, XG and 62.5/125 μm Multimode and Single-mode vailable connector styles include MT-RJ, SC, ST, LC and MPO Feature connectors with ceramic ferrules Call for quotes on custom cable assemblies Most standard cable assemblies are shipped within one week, special configuration cable assemblies can be shipped within two weeks Selected LSZH cable assemblies available upon request - contact your local NETCONNECT representative for more information 103 MP, MP NETCONNECT, NETCONNECT,

2 OPTICL FIER PRODUCTS Optical Fiber Cable ssembly Information Optical Fiber Cable ssembly Performance Details Test Description FOTP* Requirement MT-RJ 13 TI/EI (FOCIS 12) Visual and Mechanical Inspection: SC 13 TI/EI (FOCIS 3) ST 13 TI/EI (FOCIS 2) LC 13 TI/EI (FOCIS10) ttenuation 34 < 0.75 d Return Loss 107 < -20 d Low Temperature (0 C for 4 days) 188 < 0.3 d change Temperature Life (55 C for 14 days) 7 < 0.3 d change Humidity (90 to 40 C for 4 days) 5 < 0.3 d change Impact (8 drops from 1.8 m) 2 < 0.75 d IL, < -20 d RL Durability (500 cycles) 21 < 0.75 d IL, < -20 d RL Cable Retention (0 and 90 ) 6 < 0.75 d IL, < -20 d RL Flex (100 cycles) 1 < 0.75 d IL, < -20 d RL Twist (10 cycles) 36 < 0.75 d IL, < -20 d RL *Note: FOTP = Fiber Optic Test Procedure per TI/EI XX series. FOCIS = Fiber Optic Intermateability Standard. Optical Fiber Cable ssembly Length Reference Fiber Polarity Fiber Color Left Right White lue Length 104 Meter to Foot and Inch Reference Length in Meters Length in Feet Length in Inches Note: Conversion chart is for reference only and does not imply actual assembly length. MP, MP NETCONNECT, NETCONNECT,

3 OPTICL FIER PRODUCTS MPO Trunk Cable ssemblies MPO Trunk Cable ssemblies with Pulling Socks Trunk cable fiber polarity is Pair-Flipped / (see polarity diagram Chapter 2.4) Trunk cables with Pair-Straight / polarity are available Pulling socks protect MPO terminations during installation Twelve (12) fibers per MPO plug Trunk cables come pre-tested and ready for immediate use 12 and 24 fiber MPO Trunk cables meet or exceed the requirements of GR-409-CORE and UL/NEC rating for Riser and Plenum applications. Plenum Cables can be used in riser spaces dditional counts and lengths are available Description Fiber Type UL/NEC Ratings Jacket Color Part Number 50/125 μm Orange X 12-Fiber, Pair-Flipped (/) XG (850 nm LO 50/125 μm) qua X 62.5/125 μm Orange X Single-mode Yellow X 50/125 μm Orange X 24-Fiber, Pair-Flipped (/) XG (850 nm LO 50/125 μm) qua X 62.5/125 μm Orange X Single-mode Plenum (OFNR) Yellow X 50/125 μm Orange X Orange X 72-Fiber, Pair-Flipped (/) XG (850 nm LO 50/125 μm) qua X 62.5/125 μm Orange X Orange X X denotes length in feet: -1 = 10, -2 = 20, -3 = 30, -4 = 40, -5 = 50, -6 = 60, -7 = 70, -8 = 80, -9 = 90, = 100, = 110, = 120, = 130, = 140, = 150, = 160, = 170, = 180, = 190, = 200, = 210, = 220, = 230, = 240, = 250, = 260, = 270, = 280, = 290, = MP, MP NETCONNECT, NETCONNECT,

4 OPTICL FIER PRODUCTS MT-RJ and MT-RJ to SC Cable ssemblies MT-RJ Cable ssemblies Each MT-RJ connector houses two fibers Cable assemblies are riser-rated For MT-RJ SECURE assemblies, see Chapter 4 End 1 End 2 Fiber Type Jacket Color UL/NEC Rating Part Number 50/125 μm Orange OFNR X MT-RJ MT-RJ XG (850 nm 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X MT-RJ to SC Cable ssemblies Connects between equipment with different interfaces SC connectors feature ceramic ferrules Each MT-RJ houses two fibers For MT-RJ SECURE assemblies, see Chapter 4 50/125 μm Orange OFNR X Duplex SC XG (850 nm 50/125 μm) qua OFNP X 62.5/125 μm Orange OFNR X MT-RJ Single-mode Yellow OFNR X 50/125 μm Orange OFNR X Simplex SC XG (850 nm 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X 106 MP, MP NETCONNECT, MT-RJ SECURE, NETCONNECT,

5 OPTICL FIER PRODUCTS MT-RJ Cable ssemblies MT-RJ to ST Cable ssemblies Connects between equipment with different interfaces ST s feature ceramic ferrules Each MT-RJ houses two fibers Cable assemblies are riser-rated For MT-RJ SECURE assemblies, see Chapter 4 50/125 μm Orange OFNR X MT-RJ Dual ST 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X MT-RJ to LC Cable ssemblies Connects between equipment with different interfaces One Duplex LC and one MT-RJ Plug LC s feature ceramic ferrules Cable ssemblies are riser-rated Each MT-RJ houses two fibers For MT-RJ SECURE assemblies, see Chapter 4 50/125 μm Orange OFNR X MT-RJ LC Duplex XG (850 nm LO 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, = 10 MT-RJ Plug to MT-RJ Right ngle Jack Form connections between work area and consolidation point Factory-assembled and tested Save time and money on moves, adds and changes Description Jacket Color Part Number 50/125 μm OFNR (Riser) Orange X X denotes length in feet: -1 = 10, -2= 20, -3 = 30, -4 = 40, -5 = MP, MP NETCONNECT, MT-RJ SECURE, NETCONNECT,

6 OPTICL FIER PRODUCTS SC Cable ssemblies SC Cable ssemblies Cable assemblies are riser-rated features ceramic ferrules 50/125 μm Orange OFNR X SC Duplex SC Duplex XG (850 nm LO 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X SC to ST Cable ssemblies Connects between equipment with different interfaces Cable assemblies are riser-rated s feature ceramic ferrules 50/125 μm Orange ONFR X SC Duplex Dual ST XG (850 nm LO 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X SC to LC Cable ssemblies Connects between equipment with different interfaces s feature ceramic ferrules Cable ssemblies are riser-rated For LC SECURE assemblies, see Chapter /125 μm Orange OFNR X SC Duplex LC Duplex XG (850 nm LO 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X MP, MP NETCONNECT, LC SECURE, NETCONNECT,

7 OPTICL FIER PRODUCTS ST and LC Cable ssemblies ST Cable ssemblies s feature ceramic ferrules Cable assemblies are riser-rated 50/125 μm Orange OFNR X Dual ST Dual ST XG (850nm LO 50/125 nm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X Y denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -4 = 5, -5 = 10 LC Cable ssemblies s feature ceramic ferrules Cable ssemblies are riser-rated For LC SECURE assemblies, see Chapter 4 50/125 μm Orange OFNR X LC Duplex LC Duplex XG (850 nm LO 50/125 μm) qua OFNR X 62.5/125 μm Orange OFNR X Single-mode Yellow OFNR X 109 MP, MP NETCONNECT, LC SECURE, NETCONNECT,

8 OPTICL FIER PRODUCTS Single-Ended Cable ssemblies MT-RJ Pigtail Jack (Single-Ended) Cable ssemblies Description Color Fiber Type Part Number lack 50/125 μm X MT-RJ Jack Gray XG (850 nm LO 50/125 μm) X eige 62.5/125 μm X lue Single-mode X X denotes length in meters: -1 = 1, -2 = 2, -3 = 3 Compatible with MT-RJ Jack Snap-in dapter Plates Two 250 μm coated fiber in protective 900 μm tubing Compatible with fusion or mechanical splices Each MT-RJ houses two fibers MT-RJ Pigtail Plug (Single-Ended) Cable ssemblies Description Fiber Type Part Number 50/125 μm X MT-RJ Plug XG (850 nm LO 50/125 μm) X 62.5/125 μm X Single-mode X X denotes length in meters: -1 = 1, -2 = 2, -3 = 3 Compatible with MT-RJ Plug Snap-in dapter Plates Two 250 μm coated fiber in protective 900 μm tubing Compatible with fusion or mechanical splices MT-RJ Plugs are pinned Each MT-RJ houses two fibers For MT-RJ SECURE assemblies, see Chapter 4 SC Pigtail (Single-Ended) Cable ssemblies Fiber Type Part Number Simplex SC - PC 3.0 mm Jacketed X Single-mode 3.0 mm Jacketed X Simplex SC - UPC 900 μm uffered X X denotes length in meters: -1 = 1, -2 = 2, -3 = 3 Compatible with SC Snap-in dapter Plates Spliceable pigtail assembly 250 μm coated fiber in protective 900 μm tubing Compatible with fusion or mechanical splices LC Pigtail (Single-Ended) Cable ssemblies End 1 End 2 Fiber Type Part Number 50/125 μm LC Simplex, 1 m 2.0 mm XG (850 nm LO 50/125 μm) Jacketed 62.5/125 μm Single-mode Compatible with LC Snap-in dapter Plates Spliceable pigtail assembly 250 μm coated fiber in protective 900 μm tubing Compatible with fusion or mechanical splices 110 MP, MP NETCONNECT, MT-RJ SECURE, NETCONNECT,

9 OPTICL FIER PRODUCTS MT-RJ Test Cable ssemblies MT-RJ OTDR Test ssemblies Description End 1 End 2 Fiber Type Part Number 50/125 μm Dual SC Simplex 62.5/125 μm Launch Lead MT-RJ 50/125 μm Dual ST 62.5/125 μm MT-RJ Loopbacks Description Fiber Type Part Number 50/125 μm MT-RJ Loopback 62.5/125 μm Single-mode MT-RJ Test Kits End 1 End 2 Fiber Type Part Number 50/125 μm Dual ST 62.5/125 μm MT-RJ Single-mode /125 μm SC Duplex 62.5/125 μm Single-mode Replacement Components for MT-RJ Test Kits End 1 End 2 Fiber Type Part Number 50/125 μm Unpinned MT-RJ 62.5/125 μm Single-mode /125 μm Unpinned MT-RJ SC 62.5/125 μm Single-mode /125 μm ST 62.5/125 μm Single-mode /125 μm Pinned MT-RJ 62.5/125 μm Single-mode /125 μm Pinned MT-RJ SC 62.5/125 μm Single-mode /125 μm ST 62.5/125 μm Single-mode For use in testing with an OTDR test set ll assemblies are 100m in length For XG fiber testing, use standard 50/125 μm Multimode products For XG fiber testing, use standard 50/125 μm Multimode products Each Test Kit includes: 1 - MT-RJ dapter 2-MT-RJ(no pins)tosc Simplex or ST Cable ssemblies 1 - MT-RJ (with pins) to SC Simplex or ST Cable ssembly 1 - MT-RJ to MT-RJ Cable ssembly 2 - Mandrels (not included with Single-mode Kit) 1 - Carrying case Test Kits for MT-RJ SECURE Systems also available See MT-RJ OPTICL FIER SYSTEMS TESTING White Paper (available on-line at ) for details For XG fiber testing, use standard 50/125 μm Multimode products ll assemblies are 4 m in length Pinned MT-RJ Cable ssemblies are used for testing only Cable ssemblies are riser-rated For XG fiber testing, use standard 50/125 μm Multimode products 111 MP, MP NETCONNECT, MT-RJ SECURE, NETCONNECT,

10 OPTICL FIER PRODUCTS LC Test Kits and Replacement Cables LC Test Kits Description Fiber Type Part Number For use with Dual Fiber 50/125 μm / XG 50/125 μm Testers with SC Transmit 62.5/125 μm and LC Recieve Ports Single-mode For use with Dual Fiber 50/125 μm / XG 50/125 μm Testers with ST Transmit 62.5/125 μm and LC Recieve Ports Single-mode For use with Dual Fiber 50/125 μm / XG 50/125 μm Testers with LC Transmit 62.5/125 μm and LC Recieve Ports Single-mode Test Kits includes: Cable ssemblies LC Duplex Clips Mandrels (not included with Single-mode Kit) Carrying case Test Kits for LC SECURE Systems also available See FIELD TESTING LC OPTICL FIER SYSTEMS White Paper (available on-line at ) for test details Replacement Components for LC Test Kits Description Fiber Type Part Number 50/125 μm / XG 50/125 μm Mandrels 62.5/125 μm (Transmit side only) Single-mode - 50/125 μm / XG 50/125 μm LC Duplex Clips 62.5/125 μm (pack of 6) Single-mode SC to LC Simplex 50/125 μm / XG 50/125 μm ssembly, 3m 62.5/125 μm Single-mode ST to LC Simplex 50/125 μm / XG 50/125 μm ssembly, 3m 62.5/125 μm Single-mode LC to LC Simplex 50/125 μm / XG 50/125 μm ssembly, 3m 62.5/125 μm Single-mode ssemblies are 3m in length ssemblies are Simplex style Cable ssemblies are riser-rated 112 MP, MP NETCONNECT, LC SECURE, NETCONNECT,