STRATO-THERM Terminals & Splices for High Temperature Applications
|
|
- Norma Stafford
- 7 years ago
- Views:
Transcription
1 Terminals & Splices for High Temperature pplications Product Facts Product available in temperature ranges of 500 F [260 C], 550 F [288 C], 650 F [33 C] and 1200 F [69 C] Product employs the famous W and C crimp Wide range of wire sizes Complete line of related application tooling ccommodates solid and/or stranded conductors Heat extreme heat searing temperatures up to 1200 F [69 C]. This is one of the most challenging environments that electrical/ electronic circuitry has ever entered. If heat is an unavoidable dimension in your circuit design and production, this product is an important ally. In this MP line of STRTO-THERM terminals and splices, you ll find high temperature circuit hardware. You ll also find solutions to other more familiar circuit problems such as vibration, corrosion and flash-over, when they occur at high temperatures. Different types of high temperature terminals and splices found in this catalog are as follows: PIDG Terminals and Splices, and Pre-Insulated Spare Wire Caps 550 F [288 C] Range PIDG Insulation Restriction Terminals 550 F [288 C] Range Post-Insulated Terminals and Splices 550 F [288 C] R a n g e Uninsulated Terminals and Splices 650 F [33 C] Range Uninsulated Terminals and Splices 1200 F [69 C] Range Need more information? Call the MP Product Information Center: The Product Information Center is staffed with specialists well versed in all MP products. The Center can provide you with: Technical Support Catalogs Technical Documents Product Samples MP uthorized Distributor Locations Specifications subject to change. Consult MP Incorporated for latest design specifications. Copyright 1965, 1966, 1970, 1972, 1973, 197, 1975, 1977, 1980, 1983, 1991 and 1998 by MP Incorporated. ll Rights Reserved. MP, STRTO-THERM, PIDG, DIMOND GRIP, SOLISTRND, CERTI-CRIMP, MP-TPETRONIC, DYN-CRIMP are Trademarks. T E F L ON Trademark of E.I. dupont, Inc. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 1
2 Terminals & Splices for High Temperature pplications Table of Contents Introduction , Insulated Terminals and Splices: PIDG (Pre-Insulated Diamond Grip) Ring Tongue Terminals 550 F [288 C] and 500 F [260 C] , 6 Insulation Restriction Ring Tongue Terminals 550 F [288 C] Splices 500 F [260 C] Spare Wire Caps 550 F [288 C] Post Insulated Ring Tongue Terminals 500 F [260 C] Splices 550 F [288 C] and 500 F [260 C] Uninsulated Terminals and Splices: Non-Insulation Support Heat Resistant 650 F [33 C] Ring Tongue Terminals , Splices High Temperature 1200 F [69 C] Ring Tongue Terminals Spade Tongue Terminals Splices Insulation Support Heat Resistant 650 F [33 C] Ring Tongue Terminals Splices High Temperature 1200 F [69 C] Ring Tongue Terminals , 15 Splices pplication Tooling Numerical Index For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
3 Terminals & Splices for High Temperature pplications Introduction PIDG Terminals and Splices, and Pre-Insulated Spare Wire Caps 550 F [288 C] Range Because of features such as a one-piece constructed inner sleeve and a wide funnel entry design which facilitates wire entry, standard STRTO-THERM PIDG tooling may be used to terminate this product. Uninsulated Terminals and Splices 1200 F [69 C] Range Designed for reliable performance up to 550 F [288 C], this line of ring-tongue terminals, butt splices and spare wire caps features a pre-insulation sleeve of TEFLON TFE insulation material. special funnel entry feature has been added to assure easy entry and proper seating of wire. The body is copper with a choice of gold over nickel plating or nickel plating. The terminal and splice barrel accommodates stranded wire conductors only. The spare wire caps are designed for unstripped wire. PIDG Insulation Restriction Terminals 550 F [288 C] Range Post-Insulated Terminals and Splices 550 F [288 C] Range The temperature range of these terminals and splices is 550 F [288 C] for nickel plating and gold over nickel plated copper, and 500 F [ C] for silver plating, These terminals and splices accommodate solid and/or stranded conductors. Uninsulated Terminals and Splices 650 F [33 C] Range Nickel material is used for the body of both the terminal and splice. They are available with or without wire insulation support sleeve of nickel-silver alloy material. ccommodating either solid or stranded conductors in different combinations, these terminals and splices are made to cover a broad wire size range, listed in the tabular data section. Terminals made of alumel and chromel material with nickel-silver alloy sleeves are available for thermocouple applications. When using either alumel or chromel conductors, a terminal of the same material should be selected. These pre-insulated insulation restriction terminals prevent the insulation of thin-wall insulation wire from entering the terminal s wire crimp area during the crimping process. Designed for reliable performance up to 550 F [288 C], these terminals feature a pre-insulation sleeve of TEFLON (TFE) insulation material. These terminals and splices are available with and without wire insulation support. Both types are manufactured from electrolytic copper, plated with nickel. In the insulation support type, the support sleeve is fabricated from nickel-silver alloy. Both types accommodate solid or stranded conductors in various combinations. Wire size range is listed in the tabular data section. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 3
4 Terminals & Splices for High Temperature pplications Ordering Information Introduction (Continued) ll terminals and splices are listed according to wire size and type of terminal or splice. If the part number of the terminal or splice is known, refer to the Numerical Index, at the back of this catalog, for page location of tabular data. In the Tabular Data Section, part numbers are available in either loose piece or tape mounted form. When ordering tape mounted part numbers, specify the terminal or splice part number, the total quantity of parts desired (if applicable). The chart to the right lists by wire size the type of packaging available and the quantity per package. Wire Range Standard Quantities WG Loose Piece Tape Mounted ,000 5, , ,500 8, 6, 0 2, Note: Package quantities may vary with specific part numbers. The Crimp ll five types of STRTO-THERM terminals and splices provide optimum corrosion and vibration resistance plus outstanding tensile characteristics. ll types, except the STRTO-THERM PIDG terminals, splices and preinsulated spare wire caps, employ the famous W crimp which creates the precise electromechanical properties necessary for solid and/or stranded conductor combinations. proper crimp will provide a uniform and permanent attachment. When mechanical pressure is applied to the terminal barrel, the wire inside is forced into the serrations or dimples of the barrel. Shown are four typical photomacrographs of the W crimp, illustrating the results of crimping various conductor combinations. In each case, the action of the crimp has compressed the conductors and the barrel into a homogenous mass. W Crimp One Solid One Solid Two Stranded Two Solid STRTO-THERM PIDG terminals and splices employ the equally reliable confined C crimp plus multiple position insulation support crimp for today s smaller insulated wires. This C crimp is especially suited to crimping the terminal barrel and insulation sleeve to stranded wire conductors. The photomacrograph shows the results of C crimping. Virtually the same electromechanical properties are obtained as in the W crimp. Pre-insulated spare wire caps and postinsulated splices are crimped with an O crimp configuration. Confined C One Stranded For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
5 Terminals & Splices for High Temperature pplications Insulated Terminals and Splices PIDG (Pre-Insulated Diamond Grip) Ring Tongue Terminals Temperature Rating, Material and Finish Insulation TEFLON Terminal Body Copper per STM B F [288 C]. Gold per MIL-G- 520 over Nickel per QQ-N F [260 C] Metallic Sleeve Copper per STM B F [288 C] pplication Tooling pages Tongue Dimensions Wire Wire Size Part Numbers Material Stud Terminal Insulation Body Circular Mils Thickness Size W C E L Insulation Diameter Plating 1 Loose Tape [mm 2 ] Max. Min. Max. Max. Color Max. Piece Mounted Black [ ] M Black Green Green 2.5 M Green , Green 2.5 [ ] M Green Green Green M ,600-2, M [ ] / M White 3.81 M White M White 3.81, [2.15] White White / M White Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire. Note: C dimension applies from edge of metal wire barrel to center of stud hole. Nickel Nickel Nickel Nickel Gold Nickel Gold 3323 Nickel Gold Nickel 5083 Nickel Gold Nickel Gold 3325 Nickel Gold Nickel Nickel Nickel Gold Nickel 5080 Nickel Gold Nickel 5081 For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 5
6 Terminals & Splices for High Temperature pplications PIDG (Pre-Insulated Diamond Grip) Ring Tongue Terminals (Continued) Insulated Terminals and Splices (Continued) Temperature Rating, Material and Finish Insulation TEFLON Terminal Body Copper per STM B F [288 C]. Gold per MIL-G- 520 over Nickel per QQ-N F [260 C] Metallic Sleeve Copper per STM B F [288 C] pplication Tooling pages Tongue Dimensions Wire Wire Size Part Numbers Material Stud Terminal Insulation Body Circular Mils Thickness Size W C E L Insulation Diameter Plating 1 Loose Tape [mm 2 ] Max. Min. Max. Max. Color Max. Piece Mounted Black 5. 6 M Black M Black Black 5. 5,180-13, [ ] Black 5. 1/ M Black /16 M Black / Black Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire. Note: C dimension applies from edge of metal wire barrel to center of stud hole. Nickel 508 Nickel 5085 Nickel Nickel Gold Nickel 5086 Nickel 5087 Nickel 5088 PIDG (Pre-Insulated Diamond Grip) Ring Tongue Terminals (Insulation Restricting) Temperature Rating, Material and Finish Insulation TEFLON Terminal Body and Metallic Sleeve Copper per STM B F [288 C] pplication Tooling pages Wire Size Tongue Dimensions Wire Material Stud Terminal Insulation Circular Mils Thickness Size W C E L Insulation Diameter [mm 2 ] Max. Min. Max. Max. Color Max Blue [0.2] Green [0.38] , Yellow [3.37] 5.08 Note: C dimension applies from edge of metal wire barrel to center of stud hole. Part Numbers Loose Piece For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
7 Terminals & Splices for High Temperature pplications Insulated Terminals and Splices (Continued) Pre-Insulated Butt Splices Temperature Rating, Material and Finish Insulation TEFLON Splice Body Copper per STM B152 Plating Gold per MIL-G-520 over Nickel per QQ-N-290, 500 F [260 C] Metallic Sleeve Copper per STM B F [288 C] pplication Tooling pages Wire Size Dimension Metallic Wire Circular Mils Sleeve Insulation [mm L Max. Diameter 2 ] Color Max , Natural [ ] ,600-2, Red [ ] ,831-6, Blue [ ] Part Numbers Loose Piece Pre-Insulated Spare Wire Caps (For Unstripped Wire) Temperature Rating, Material and Finish Insulation TEFLON Ring Copper per STM B F [288 C] pplication Tooling shown this p a g e Tool Part No Wire Tool Insulation Dimension Ring Part Color Diameter L Max. Color Numbers Guide Range Red and Green Green Blue and Green Green Yellow and Green Green Brown and Green Green Violet and Green Green Black and Gray and Nickel and Nickel White For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 7
8 Terminals & Splices for High Temperature pplications Insulated Terminals and Splices (Continued) Post-Insulated Ring Tongue Terminals Temperature Rating, Material and Finish Insulation TEFLON Terminal Body Copper per STM B152 Plating Silver per QQ-S-365, 500 F [260 C], Gold per MIL-G- 520 over Nickel per QQ-N-290, 500 F [260 C] Ring Copper per STM B152, luminum per QQ--250/1 550 F [288 C] pplication Tooling pages Wire Size Circular Mils [mm 2 ] ,290 [ ] 8 13,0-20,800 [6.6-.5] 6 20,800-33,0 [ ] Tongue Dimensions Wire Part No. Material Stud W L Dim. Body Ring Ring Ring Insulation Thickness Size pprox. Plating Material Plating Color Diameter Loose Max. Code (fter Crimping) Range Piece M Silver Copper Nickel Natural Gold luminum Red Gold luminum Blue Post-Insulated Splices Temperature Rating, Material and Finish Insulation TEFLON Bushing TEFLON Splice Body Copper per STM B152 Plating Gold per MIL-G-520 over Nickel per QQ-N-290, 500 F [260 C], Nickel per QQ-N-290, 550 F [288 C], Silver per QQ-S- 365, 500 F [260 C] Ring luminum per QQ--250/1, Copper per STM B F [288 C] pplication Tooling pages Wire Size Dimension Ring Part No. Splice Ring Ring Wire Insulation Circular Mils L Dim. pprox. Plating Material Plating Color Diameter Range Loose [mm 2 ] (fter Crimping) Code Piece Gold luminum Yellow [ ] Silver Copper Nickel Natural ,290 [ ] Nickel luminum Red ,600-2, Gold luminum Red [ ] ,0-20, Gold luminum Red [6.6-.5] 1 No bushing 8 For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
9 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices Solistrand Heat Resistant Ring Tongue Terminals Non-Insulation Support Non-Insulation Support (Wire Range 2 & 1/0) Temperature Rating, Material and Finish Terminal Body Copper per STM B F [33 C] pplication Tooling pages Tongue Wire Size Dimensions Part Numbers Material Stud Circular Mils Style Thickness Size W C E L Loose Tape [mm 2 ] Max. Max. Max. Piece Mounted M , [ ] M M ,050-5, M [ ] * / M M M ,180-13,0 [ ] / M /16 M / M / ,0-20, M6 [6.6-.5] /16 M / / M ,800-33,0 [ ] / M / *vailable in small packaging quantities. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 9
10 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices (Continued) Solistrand Heat Resistant Ring Tongue Terminals (Continued) Non-Insulation Support Non-Insulation Support (Wire Range 2 & 1/0) Temperature Rating, Material and Finish Terminal Body Copper per STM B F [33 C] pplication Tooling pages Wire Size Circular Mils [mm 2 ] 33,0-52,600 [ ] 2 52,600-83,700 [ ] 1/0 83, ,500 [ ] Tongue Dimensions Part Numbers Material Stud Style Thickness Size W C E L Loose Tape Max. Max. Max. Piece Mounted 1/ M /16 M / /8 B /8 B Solistrand Heat Resistant Splices Style- Non-Insulation Support Butt Splice Style-B Non-Insulation Support Parallel Splice Style-C Non-Insulation Support Butt Splice Temperature Rating, Material and Finish Splice Body Copper per STM B F [33 C] pplication Tooling pages Wire Size Material Dimensions Part Numbers Circular Mils Thickness Style L ID OD Loose [mm 2 ] Max. Max. Min. Max. Piece , B [ ] C ,050-5, B [ ] C ,180-13,0.02 B [ ] C ,0-20, B [6.6-.5] For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
11 Terminals & Splices for High Temperature pplications S o l i s t r a n d High Temperature Ring Tongue Terminals Uninsulated Terminals and Splices (Continued) Temperature Rating and Material Terminal Body Nickel per STM B162, 1200 F [69 C] pplication Tooling pages Non-Insulation Support Tongue Wire Size Dimensions Part Numbers Material Color Stud Circular Mils Thickness Code Size W C E L Loose Tape [mm 2 ] Max. Min. Max. Max. Piece Mounted M * , [ ] * M M * M M * 2,050-5, [ ] * / M /16 M / M M * * ,180-13, [ ] 1/ M * /16 M / ,0-20, [6.6-.5] *vailable in small packaging quantities. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 11
12 Terminals & Splices for High Temperature pplications S o l i s t r a n d High Temperature Spade Tongue Terminals Uninsulated Terminals and Splices (Continued) Temperature Rating and Material Terminal Body Nickel per STM B162, 1200 F [69 C] pplication Tooling pages Non-Insulation Support Tongue Wire Size Dimensions Material Color Stud Part Number Circular Mils Thickness Code Size W C E L X [mm 2 ] Max. Min. Max. Max. Loose Piece ,050-5,180 [ ] M Solistrand High Temperature Splices Style- Non-Insulation Support Butt Splice Style-B Non-Insulation Support Parallel Splice Style-C Non-Insulation Support Butt Splice Temperature Rating and Material Splice Body Nickel per STM B162, 1200 F [69 C] pplication Tooling pages Wire Size Material Dimensions Part Numbers Color Style Circular Mils Thickness Code L ID OD Loose [mm 2 ] Max. Max. Min. Max. Piece ,260 [ ] ,050-5,180 [ ] 12-5,180-13,0 [ ] *vailable in small packaging quantities B C B C B C * * For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
13 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices (Continued) Diamond Grip Heat Resistant Ring Tongue Terminals Insulation Support Temperature Rating, Material and Finish Terminal Body Copper per STM B F [33 C] Metallic Sleeve Nickel Silver per STM B122 pplication Tooling pages Tongue Dimensions Wire Part Numbers Wire Size Material Stud Insulation Circular Mils Thickness Size W C E L Diameter Loose Tape [mm 2 ] Max. Min. Max. Max. Max. Piece Mounted M , [ ] 0.8 M / M M ,050-5, M [ ] / M M M ,180-13, [ ] / M Note: C dimension applies from edge of metal wire barrel to center of stud hole For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 13
14 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices (Continued) Diamond Grip Heat Resistant S p l i c e s Insulation Support Butt Splice Temperature Rating, Material and Finish Splice Body Copper per STM B F [33 C] Metallic Sleeve Nickel Silver per STM B122 pplication Tooling pages Dimension Wire Part Numbers Wire Size Material Insulation Circular Mils Thickness L Diameter Loose [mm 2 ] Max. Max. Max. Piece ,260 [ ] ,050-5,180 [ ] 12-5,180-13,0 [ ] Diamond Grip High Temperature Ring Tongue Terminals Temperature Rating and Material Terminal Body See table, 1200 F [69 C], Nickel per STM B162, lumel, Chromel Metallic Sleeve Nickel Silver per STM B122 pplication Tooling pages Insulation Support Tongue Dimensions Wire Wire Size Sleeve Part Numbers Material Stud Body Insulation Circular Mils Thickness Size W C E L Color Material Diameter Loose Tape [mm 2 ] Max. Min. Max. Max. Code Max. Piece Mounted M Chromel Gray M , Chromel Gray [ ] lumel Green Chromel Gray lumel Green / M Note: C dimension applies from edge of metal wire barrel to center of stud hole. 1 For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
15 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices (Continued) Diamond Grip High Temperature Ring Tongue Terminals (Continued) Tongue Dimensions Wire Wire Size Part Numbers Material Stud Body Sleeve Insulation Circular Mils Thickness Size W C E L Material Color Diameter Loose Tape [mm 2 ] Max. Min. Max. Max. Code Max Piece Mounted M M Chromel Gray lumel Green ,050-5, [ ] Chromel Gray lumel Green / M / M M Chromel Gray ,180-13, [ ] lumel Green / M /16 M Note: C dimension applies from edge of metal wire barrel to center of stud hole. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 15
16 Terminals & Splices for High Temperature pplications Uninsulated Terminals and Splices (Continued) Diamond Grip High Temperature Splices Insulation Support Butt Splice Temperature Rating and Material Splice Body See table, 1200 F [69 C], Nickel per STM B162, lumel, Chromel Metallic Sleeve Nickel Silver per STM B122 pplication Tooling pages Dimension Wire Part Numbers Wire Size Material Splice Sleeve Insulation Circular Mils Thickness L Body Color Diameter Loose [mm 2 ] Max. Max. Material Code Max. Piece ,260 [ ] ,050-5,180 [ ] 12-5,180-13,0 [ ] Nickel lumel Green Chromel Gray Nickel lumel Green Chromel Gray Nickel For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
17 Terminals & Splices for High Temperature pplications pplication Tooling Information for STRTO-THERM Insulated Heat Resistant and High Temperature Terminals and Splices Wire Size Range WG 26- Pneumatic Tooling For Tooling Tape Mounted Products MP Dies for Dies for 626 Pneumatic Tools Product Wire Hand MP-TPETRONIC [ ] and [ ] Type Size Tools require Straight ction dapter 1 MP-O-LECTRIC or C Head dapter Requires pplicator Dies also fit Hand Tool MPOMTOR CLS IV 2 Requires pplicators Pre-Insulated Terminals Pre-Insulated Splices Straight ction dapter is used with Tools or C Head dapter is used with Tools or Both adapters require the use of non-ratchet tool holder or ratchet tool holder Call Tooling ssistance Center for Machine and pplicator part numbers. Wire Size Range WG 26-6 Hydraulic and Battery Powered MP Tools With Interchangeable Dies Product Wire Hand Type Size Tools C Head 2 C Nest Indent Head Post Insulated , Terminals and Splices Part Number only 2 These crimping heads are recommended for use only with MP Hydraulic Hand Pump , DYN-CRIMP Hydraulic Power Units (115 VC) and (230 VC), and with DYN-CRIMP II Battery Operated Hydraulic Power Unit See pages 20 & 21. For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 17
18 Terminals & Splices for High Temperature pplications pplication Tooling Information for STRTO-THERM Uninsulated Heat Resistant and High Temperature Terminals and Splices Wire Size Range WG 22- Product Type MP Wire Size Hand Tools Pneumatic Tooling For Tooling Tape Mounted Products Dies for MP-TPETRONIC Crimping Heads for 626 Pneumatic Tool MP-O-LECTRIC and Requires pplicator 1 MPOMTOR CLS IV 2 Requires pplicators Uninsulated Terminals and Splices with Insulation Support Uninsulated Terminals and Splices with Non-Insulation Support Crimping Heads require the use of non-ratchet tool holder or ratchet tool holder Call Tooling ssistance Center for Machine and pplicator part numbers. Wire Size Range WG 8-1/0 Pneumatic Hydraulic Tools WIth Hydraulic and Battery Powered Tooling Self Contained Dies Tools with Interchangeable Dies Product MP Hand Hand Tool, Type Wire Tools Hand Latch & Size Head Tool Head Latch Heads C Head C Head Nest Indent Nest Indent Uninsulated 6 No CERTI Terminals CRIMP and Splices with Non-Insulation 6133 Support / CERTI-CRIMPHand Tool. 2 These crimping heads are recommended for use only with MP Hydraulic Hand Pump , DYN-CRIMP Hydraulic Power Units (115 VC) and (230 VC), and with DYN-CRIMP II Battery Operated Hydraulic Power Unit See Pages 20 & 21. For additional tooling information, call For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
19 Terminals & Splices for High Temperature pplications pplication Tooling Information for STRTO-THERM Heat Resistant and High Temperature Terminals and Splices Loose Form Terminal and Splice Tooling CERTI-CRIMP Hand Tools Double ction Hand Tool Heavy Head Hand Tool Part No Straight ction Double ction Hand Tool C Head Straight ction Hand Tool Part No T-Head Tool Pneumatic Tools 6-26 Pneumatic Tool Part No Part No Hydraulic Hand Tools Part No (Self Contained Dies) Part No (Dies Required) For additional tooling information, call For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 19
20 Terminals & Splices for High Temperature pplications pplication Tooling Information for STRTO-THERM Heat Resistant and High Temperature Terminals and Splices (Continued) Tape Mounted MP-TPETRONIC Machine 69875, (Requires Dies) MP-O-LECTRIC, Model G Machine (Requires pplicator and Dies) MPOMTOR CLS IV Machine (Requires pplicators and Dies) Latch Heads and Dies Part No Part No Part No Part No (Self Contained Dies) Part No For additional tooling information, call For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
21 Terminals & Splices for High Temperature pplications pplication Tooling Information for STRTO-THERM Heat Resistant and High Temperature Terminals and Splices DYN-CRIMP II Battery Operated Hydraulic Power Unit Hand Operated Power Unit DYN-CRIMP Electric Hydraulic Power Unit Part No Typical interchangable hose, head and dies not included (Hose, head and dies not included) Refer to the table below for accessories. Power Unit Only (Includes Pressure Release) 115 Volts (60 Hz) Volts (60 Hz) MP application tools are designed to produce a carefully controlled uniform pressure crimp, regardless of how they are powered. ll tools shown are specially designed for MP products and are precision machined from hard tool steel. Handle Control Hose ssembly Foot Control Multidirectional Valve Power Units ccessories For Use With Power Unit No. ccessory Description ccessory Part No. 7' Handle Control ssembly Hose & Cord ' Handle Control ssembly Hose & Cord ' Handle Control ssembly Hose & Cord ' Handle Control ssembly Hose & Cord Remarks ' Foot Switch ssembly Need Hose ssembly ' Hose ssembly Foot Switch ' Hose ssembly ssembly needed with ' Hose ssembly these Hose ssemblies 21' Hose ssembly and ' Hose ssembly (1/" I.D.) More Flexible, Lighter Weight. 3' Hose ssembly (1/" I.D.) Recommended for use with 7' Hose ssembly (1/" I.D.) DYN-CRIMP II Battery 15' Hose ssembly (1/" I.D.) Operated Hydraulic Power Un i t Way Multi-Directional Valve For use with Way Multi-Directional Valve (Elec.Ctl.) Foot Switch only 1 Contact MP Incorporated for usage recommendations. 2 lso see MP Customer Manual lso see MP Customer Manual lso see MP Customer Manual Note: ll Hoses and Handle Control ssemblies have a 3/8" high flow male coupler ( ) on each end. ll Power Units and Heads have a 3/8" high flow female coupler ( ). For additional tooling information, call For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications. 21
22 Terminals & Splices for High Temperature pplications Part Number Index N o t e : This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. Page Part No. Page Part No. Page For drawings, technical data or samples, contact your MP sales engineer or call the MP Product Information Center Specifications subject to change. Consult MP for latest specifications.
23 Terminals & Splices for High Temperature pplications Engineering Notes MP Incorporated, Harrisburg, P 175; Phone: ; FX: Product Information Center; Phone:
24 MP Business Centers, Worldwide w w w. a m p. c o m mericas rgentina Buenos ires Phone: Fax: Brazil Sao Paulo Phone: Fax: Canada Toronto Phone: Fax: sia/ Pacific ustralia Sidney Phone: Fax: India Bangalore Phone: Fax: Indonesia Jakarta Phone: Fax: Japan Tokyo Phone: Fax: Korea Seoul Phone: Fax: E u r o pe/middle East/ f r i c a ustria Vienna Inside: Phone: Fax: Outside: Phone: Fax: Belgium Brussels Phone: Fax: Bulgaria Sofia Phone: Fax: Croatia Zagreb Phone: Fax: Czech Republic Kurim Phone: Fax: Denmark Viby Phone: Fax: Egypt Cairo Phone: Fax: Estonia Tallinn Phone: Fax: Finland Helsinki Phone: Fax: France Pontoise Phone: Fax: Germany Langen Phone: Fax: Chile Santiago Phone: Fax: Columbia Bogata Phone: Fax: Mexico Mexico City Phone: Fax: Malaysia Kuala Lampur Phone: Fax: New Zealand uckland Phone: Fax: Peoples Republic of China Hong Kong Phone: Fax: Shangha Phone: Fax: Shunde Phone: Fax: Great Britain London Phone: Fax: Greece thens Phone: Fax: Holland s-hertogenbosch Phone: Fax: Hungary Budapest Phone: Fax: Ireland Dublin Phone: Fax: Israel Tel viv Phone: Fax: Italy Torino Phone: Fax: Lithuania Vilnius Phone: Fax: Norway Oslo Phone: Fax: Poland Warsaw Phone: /91/92 Fax: Portugal Lisbon Phone: Fax: United States Harrisburg, P Phone: Fax: For Latin/South merican Countries not shown Phone: Fax: Philippines Manila Phone: Fax: Singapore Singapore Phone: Fax: Taiwan Taipei Phone: Fax: Thailand Bangkok Phone: Fax: Vietnam Ho Chi Minh City Phone: Fax: Romania Bucharest Phone: /3596 Fax: Russia Moscow Phone: /07/08/09 Fax: St. Petersburg Phone: Fax: Slovakia Bystrica Phone: /121 Fax: Slovenia Ljubljana Phone: Fax: South frica Johannesburg Phone: Fax: Spain Barcelona Phone: Fax: Sweden Stockholm Phone: Fax: Switzerland Steinach Phone: Fax: Turkey Istanbul Phone: Fax: For Middle East/frican Countries not shown Phone: MP Incorporated, Harrisburg, P Contact your regional center: US Fax: Canada United Kingdom Singapore Japan On the internet at Related Businesses MP Circuits Division Greenville, SC, US Phone: Fax: MP Circuits and Packaging, EME Dublin, Ireland Phone: Fax: MP Packaging and Carroll Touch Systems Division Round Rock TX, US Phone: Fax: MP-Simel S.. Gevrey-Chambertin, France Phone: Fax: R-pplied Robotics Division Rousset, France Phone: Fax: Carroll Touch International, Ltd. Tokyo, Japan Phone: Fax: DSM Decolletage S.. Saint-Maurice Phone: Fax: Fibernet Division Rowville, ustralia Phone: Fax: Wellington, New Zealand Phone: Fax: HTS Elektrotechnik GmbH Neunkirchen, Germany Phone: Fax: M/-COM Division mericas Lowell, M, US Phone: Fax: Europe/Middle East/frica Bracknell, England Phone: Fax: sia/pacific Hong Kong Phone: Fax: Madison Cable Corporation Worcester, M, US Phone: Fax: Madison Cable Ltd. Dundee, Scotland Phone: Fax: Precision Interconnect Division Portland, OR, US Phone: Fax: M G MP MP and Connecting at a Higher Level are trademarks. Rev. 1, /97 Printed in US
AMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
More informationGlobal Network Access International Access Rates
Global Network Access International Access Rates We know that you need to communicate with your partners, colleagues and customers around the world. We make every effort to understand the difficulties
More informationGuide. Axis Webinar. User guide
Guide Axis Webinar User guide Table of contents 1. Introduction 3 2. Preparations 3 2.1 Joining the visual part 3 2.2 Joining the conference call 3 2.3 Providing feedback and asking questions during a
More informationSunGard Best Practice Guide
SunGard Best Practice Guide What Number Should I Use? www.intercalleurope.com Information Hotline 0871 7000 170 +44 (0)1452 546742 conferencing@intercalleurope.com Reservations 0870 043 4167 +44 (0)1452
More informationGuide. Axis Webinar User Guide
Guide Axis Webinar User Guide Introduction Joining an Axis Webinar is a quick and easy way to gain additional knowledge about more than just new products, and technology. These webinars allow attendees
More information5.2. Overview. The better method to install solderless compression connectors on power cable
5.2 Overview The better method to install solderless compression connectors on power cable The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree
More informationWorld Consumer Income and Expenditure Patterns
World Consumer Income and Expenditure Patterns 2014 14th edi tion Euromonitor International Ltd. 60-61 Britton Street, EC1M 5UX TableTypeID: 30010; ITtableID: 22914 Income Algeria Income Algeria Income
More informationPlease join us on the next INCOSE Webinar. When. Topic. Speaker
Please join us on the next INCOSE Webinar When June 15th from 11am-12pm EDT Topic Transforming to System Management for Non-deterministic Situations Speaker Jack Ring Abstract Let s transform the panoply
More informationBEST EXECUTION POLICY
BEST EXECUTION POLICY In Prague on 9 th December 2015 TABLE OF CONTENT 1. Introductory provisions 2. Markets where the Company executes customer's instructions 3. Instructions 4. Strategy for executing
More informationMake the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION
Make the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION photoelectric sensors Thanks to its vision for innovation and technological enhancement, Contrinex keeps on setting new standards
More informationForeign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund
Income INTECH Global Income Managed Volatility Fund Australia 0.0066 0.0375 Austria 0.0045 0.0014 Belgium 0.0461 0.0138 Bermuda 0.0000 0.0059 Canada 0.0919 0.0275 Cayman Islands 0.0000 0.0044 China 0.0000
More informationAccuracy counts! SENSORS WITH ANALOG OUTPUT
Accuracy counts! SENSORS WITH ANALOG OUTPUT OTHER APPLICATIONS: KEY ADVANTAGES: Distance measurement Positioning Profile detection Deformation monitoring Vibration monitoring Process monitoring Detection
More information41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50.
Overall Results Climate Change Performance Index 2012 Table 1 Rank Country Score** Partial Score Tendency Trend Level Policy 1* Rank Country Score** Partial Score Tendency Trend Level Policy 21 - Egypt***
More informationPIDG FASTON Receptacles and Tabs
Product Facts Pre-insulated terminal designed for complete and uniform reliability in the most difficult circuit environment Consists of an unplated or tin plated brass body or a tin plated phosphor bronze
More informationHow To Get A New Phone System For Your Business
Cisco Phone Systems Telemarketing Script Cold Call 1. Locate Contact: Name listed Owner General Manager / Office Manager Chief BDM (Business Decision Maker) Note: Avoid talking to IT since this is not
More informationBrochure More information from http://www.researchandmarkets.com/reports/1339929/
Brochure More information from http://www.researchandmarkets.com/reports/1339929/ The 2011 World Forecasts of Machine Tools That Remove Material by Laser or Light, Photon, Ultrasonic, Electro-Discharge,
More informationDSV Air & Sea, Inc. Aerospace Sector. DSV Air & Sea, Inc. Aerospace
DSV Air & Sea, Inc. Aerospace Sector DSV Air & Sea, Inc. Aerospace Introduction to DSV DSV is a global supplier of transport and logistics services. We have offices in more than 70 countries and an international
More informationTriple-play subscriptions to rocket to 400 mil.
Triple-play criptions to rocket to 400 mil. Global triple-play criptions will reach 400 million by 2017; up by nearly 300 million on the end-2011 total and up by 380 million on the 2007 total, according
More informationReporting practices for domestic and total debt securities
Last updated: 4 September 2015 Reporting practices for domestic and total debt securities While the BIS debt securities statistics are in principle harmonised with the recommendations in the Handbook on
More informationT R A V E L A N D A C C O M M O D A T I O N E X P E N S E S 2 0 1 4
13/01/2015 www.bdo.lu T R A V E L A N D A C C O M M O D A T I O N E X P E N S E S 2 0 1 4 In Luxembourg the travel expenses for business trips are reimbursed either based on actual expenses or based on
More informationMTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002
GB MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002 Instruction manual 0459 576 101 GB 090129 Valid for serial no. 506 -xxx -xxxx, 719
More informationAppendix 1: Full Country Rankings
Appendix 1: Full Country Rankings Below please find the complete rankings of all 75 markets considered in the analysis. Rankings are broken into overall rankings and subsector rankings. Overall Renewable
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationBROWN BROTHERS HARRIMAN (LUXEMBOURG) S.C.A. Wells Fargo (Lux) Worldwide Fund
Argen na CITIBANK, N.A. BUENOS AIRES BRANCH Australia Austria HSBC BANK AUSTRALIA LIMITED FOR THE HONGKONG AND SHANGHAI DEUTSCHE BANK AG, VIENNA BRANCH Belgium DEUTSCHE BANK AG, AMSTERDAM BRANCH Brazil
More informationIndustry Service Line 9 ABeam Consulting has developed a proprietary network utilizing the strengths of being Asia based. We provide service that fits the local conditions to clients in every region and
More informationSST 2. Soft starting tool 2. Instruction manual
SST 2 Soft starting tool 2 Instruction manual 0740 800 174 090909 Introduction.................................................................... 3 Connections to / from SST 2.....................................................
More informationTo install the I/O Module Board: 1. Remove AC power from decoder.
Installation Data (Catalog Number 2755-NB0, -NB1, -NB2) This document shows how to install the following components in the 2755-DSxx ➀ and 2755-DDxx ➀ Bar Code Decoders. I/O Module Board (Catalog No. 2755-NB1
More informationCisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter
Data Sheet Cisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter To meet the continual need for increased router features and performance, Cisco Systems introduces its newest packetover-sonet (POS) port
More informationGlobal AML Resource Map Over 2000 AML professionals
www.pwc.co.uk Global AML Resource Map Over 2000 AML professionals January 2016 Global AML Resources: Europe France Italy Jersey / Guernsey 8 Ireland 1 Portugal 7 Luxembourg 5 United Kingdom 1 50 11 Spain
More informationM8 / M12 CONNECTOR SYSTEM
M8 / M12 CONNECTOR SYSTEM EVERY CONNECTION COUNTS TE CONNECTIVITY S M8 / M12 Connector System for machine industrial automation and control applications provides a solution that safely and reliably ensures
More informationReport on Government Information Requests
Report on Government Information July 1 - December 31, 2015 Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software and
More informationLogix5000 Clock Update Tool V2.00.36. 12/13/2005 Copyright 2005 Rockwell Automation Inc., All Rights Reserved. 1
Logix5000 Clock Update Tool V2.00.36. 1 Overview Logix5000 Clock Update Tool 1. 1. What is is it? it? 2. 2. How will it it help me? 3. 3. How do do I I use it? it? 4. 4. When can I I get get it? it? 2
More informationGfK PURCHASING POWER INTERNATIONAL
GfK PURCHASING POWER INTERNATIONAL 1 Agenda 1. Europe 3 2. Americas 45 3. Asia & Near East 54 4. Afrika 66 5. Australia 68 6. Overview of countries and available levels 70 2 2 EUROPE 4 GfK
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationMTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
More informationSulfuric Acid 2013 World Market Outlook and Forecast up to 2017
Brochure More information from http://www.researchandmarkets.com/reports/2547547/ Sulfuric Acid 2013 World Market Outlook and Forecast up to 2017 Description: Sulfuric Acid 2013 World Market Outlook and
More informationTHE CISCO CRM COMMUNICATIONS CONNECTOR GIVES EMPLOYEES SECURE, RELIABLE, AND CONVENIENT ACCESS TO CUSTOMER INFORMATION
CUSTOMER SUCCESS STORY THE CISCO CRM COMMUNICATIONS CONNECTOR GIVES EMPLOYEES SECURE, RELIABLE, AND CONVENIENT ACCESS TO CUSTOMER INFORMATION EXECUTIVE SUMMARY CUSTOMER NAME Coleman Technologies INDUSTRY
More information2015 Top 100 Outsourcing Destinations. December 2014
2015 Top 100 Outsourcing Destinations December 2014 Tholons Top 100 Outsourcing Destinations 2015 The Tholons Top 100 Outsourcing Destinations reports, having been around since 2006, continues to be one
More informationHigh Speed Data Networking for the Automotive Market
High Speed Data Networking for the Automotive Market 2 Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions and wireless systems, with customers in
More informationBrochure More information from http://www.researchandmarkets.com/reports/3278449/
Brochure More information from http://www.researchandmarkets.com/reports/3278449/ The 2016 World Forecasts of Hand-Operated Date, Sealing, or Numbering Stamps; Devices for Printing or Embossing Labels;
More informationOCTOBER 2010. Russell-Parametric Cross-Sectional Volatility (CrossVol ) Indexes Construction and Methodology
OCTOBER 2010 Russell-Parametric Cross-Sectional Volatility (CrossVol ) Indexes Construction and Methodology SEPTEMBER 2010 Russell-Parametric Cross-Sectional Volatility (CrossVol) Indexes Construction
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationRegion Country AT&T Direct Access Code(s) HelpLine Number. Telstra: 1 800 881 011 Optus: 1 800 551 155
Mondelēz International HelpLine Numbers March 22, 2013 There are many ways to report a concern or suspected misconduct, including discussing it with your supervisor, your supervisor s supervisor, another
More informationCargo Sales & Service Presentation
Cargo Sales & Service Presentation Who is Air Logistics Group? Established in 1994 One of the world s leading cargo sales and service companies 55 offices spanning 32 countries and over 200 employees worldwide
More informationBT Premium Event Call and Web Rate Card
BT Managed Event and BT Self-Managed Event (also referred to as Express, Plus and Premium) Conference Bridge and Call for Booked Audio Conferencing Services will comprise the following for each phone-conference:
More informationTable 1: TSQM Version 1.4 Available Translations
Quintiles, Inc. 1 Tables 1, 2, & 3 below list the existing and available translations for the TSQM v1.4, TSQM vii, TSQM v9. If Quintiles does not have a translation that your Company needs, the Company
More informationCustomer Support. Superior Service Solutions for Your Laser and Laser Accessories. Superior Reliability & Performance
Customer Support Superior Service Solutions for Your Laser and Laser Accessories Superior Reliability & Performance Optimizing Service Support for our Customers. Increased up-time Focus on core business
More informationCisco Conference Connection
Data Sheet Cisco Conference Connection Cisco IP Communications a comprehensive system of powerful, enterprise-class solutions including IP telephony, unified communications, IP video/audio conferencing,
More informationGlobal Economic Briefing: Global Inflation
Global Economic Briefing: Global Inflation August 7, Dr. Edward Yardeni -97-7 eyardeni@ Debbie Johnson -- djohnson@ Mali Quintana -- aquintana@ Please visit our sites at www. blog. thinking outside the
More informationThe big pay turnaround: Eurozone recovering, emerging markets falter in 2015
The big pay turnaround: Eurozone recovering, emerging markets falter in 2015 Global salary rises up compared to last year But workers in key emerging markets will experience real wage cuts Increase in
More informationReport on Government Information Requests
Report on Government Information January 1 - June 30, 2015 Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software and
More informationGlobal Dialing Comment. Telephone Type. AT&T Direct Number. Access Type. Dial-In Number. Country. Albania Toll-Free 00-800-0010 888-426-6840
Below is a list of Global Access Numbers, in order by country. If a Country has an AT&T Direct Number, the audio conference requires two-stage dialing. First, dial the AT&T Direct Number. Second, dial
More informationMANDATORY PROVIDENT FUND SCHEMES AUTHORITY
Guidelines III.4 MANDATORY PROVIDENT FUND SCHEMES AUTHORITY III.4 Guidelines on Approved Exchanges INTRODUCTION Section 2 of the Mandatory Provident Fund Schemes (General) Regulation ( the Regulation )
More informationE-Seminar. Financial Management Internet Business Solution Seminar
E-Seminar Financial Management Internet Business Solution Seminar Financial Management Internet Business Solution Seminar 3 Welcome 4 Objectives 5 Financial Management 6 Financial Management Defined 7
More information2014 Tholons Top 100 Outsourcing Destinations: Rankings. December 2013
2014 Tholons Top 100 Outsourcing Destinations: Rankings December 2013 Tholons Top 100 Outsourcing Destinations Since its inception in 2006, the Tholons Top 100 Outsourcing Destinations report has been
More informationCisco IT Data Center and Operations Control Center Tour
Cisco IT Data Center and Operations Control Center Tour Inside the Build Room Page 1 of 8 5. Inside the Build Room Introduction Figure 1. Inside the Build Room Ian: The purpose of the Build room is for
More informationGet the benefits of Norgren s unique range of Online services
Get the benefits of Norgren s unique range of Online services Make your job easier and save time - everything you need to select, design and purchase Norgren pneumatics is in one convenient location, available
More informationConfiguring DHCP for ShoreTel IP Phones
Configuring DHCP for ShoreTel IP Phones Network Requirements and Preparation 3 Configuring DHCP for ShoreTel IP Phones The ShoreTel server provides the latest application software and configuration information
More informationwww.osram.com OSRAM LEDs take downlights into the future. LEDVANCE DOWNLIGHT and PARATHOM KIT LED PRO.
www.osram.com OSRAM LEDs take downlights into the future. LEDVANCE DOWNLIGHT and PARATHOM KIT LED PRO. INTRODUCTION Save on energy, not on brilliance. In future, lighting concepts will be primarily judged
More informationQuickSpecs. HP Wireless Keyboard and Mouse. Models
Overview 1. Wireless Keyboard 2. USB Wireless Transceiver 3. Wireless Mouse Models QY449AA Introduction The combine a cordless keyboard, cordless laser mouse, and USB wireless receiver in a single package.
More informationTHE WORLD S LEADING CAR DESIGN MAGAZINE
THE WORLD S LEADING CAR DESIGN MAGAZINE DISTRIBUITED IN MORE THAN 60 COUNTRIES EUROPE: Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, United Kingdom, Greece, Ireland, Iceland, Italy, Latvia,
More informationExecution Venues Traiding places provided by UBS Switzerland AG
a b Execution Venues Traiding places provided by UBS AG Note that this list of Execution Venues is not exhaustive. This list will be kept under review and updated in accordance with UBS s Order execution
More informationSenate Committee: Education and Employment. QUESTION ON NOTICE Budget Estimates 2015-2016
Senate Committee: Education and Employment QUESTION ON NOTICE Budget Estimates 2015-2016 Outcome: Higher Education Research and International Department of Education and Training Question No. SQ15-000549
More informationINDEXES INDEX DEFINITIONS. Index Marketing. February 2015
INDEXES INDEX DEFINITIONS Index Marketing February 2015 FEBRUARY 2015 CONTENTS MSCI Regional Equity Indexes... 3 MSCI Index Variants... 7 Definition of Terms for MSCI Indexes... 9 MSCI.COM PAGE 2 OF 12
More informationInternational Health Solutions. Worldwide Healthcare Plan
Worldwide Healthcare Plan 37 subsidiaries Argentina, Austria, Bahamas, Belgium, Brazil, Canada, Chad, Chile, China, Congo, Czech Republic, France, French Polynesia, Germany, Greece, Hungary, India, Ireland,
More informationBuilding on +60 GW of experience. Track record as of 31 December 2013
Building on +60 GW of experience Track record as of 31 December 2013 Can data and analysis make a difference on turbine performance? Proven technology. For Vestas, it is more than a saying it is something
More informationSupermicro Global Hardware Maintenance Service & Support
Supermicro Global Hardware Maintenance Service & Support Supermicro Global Hardware Enhanced Services provides the highest quality of help desk services and product support for your Supermicro solutions.
More informationTollFreeForwarding.com TollFreeForwarding.com is the leading global provider of international virtual phone numbers. We help companies around the world grow their global business by making it easier for
More informationLANDWELL. Solicitors. Life Sciences Unit
LANDWELL Solicitors Life Sciences Unit LANDWELL Solicitors Life Sciences Unit Our Practice Landwell Solicitors is a leading firm of business lawyers providing legal solutions to businesses in the Life
More informationHSE HR Circular 005/2010 12 th February 2010.
Office of the National Director of Human Resources Health Service Executive Dr. Steevens Hospital Dublin 8 HSE HR Circular 005/2010 12 th February 2010. To: Each Member of Management Team, HSE; Each Regional
More informationImage Lab Software for the GS-900 Densitometer
Image Lab Software for the GS-900 Densitometer Quick Start Guide Catalog # 170-9690 Bio-Rad Technical Support For help and technical advice, please contact the Bio-Rad Technical Support department. In
More informationCisco Blended Agent: Bringing Call Blending Capability to Your Enterprise
DATA SHEET Cisco Blended Agent: Bringing Call Blending Capability to Your Enterprise Cisco ICM software has traditionally enabled companies to distribute inbound service volume to a variety of termination
More informationCisco IOS Public-Key Infrastructure: Deployment Benefits and Features
Data Sheet Cisco IOS Public-Key Infrastructure: Deployment Benefits and Features Introduction to Public Key Infrastructure Public Key Infrastructure (PKI) offers a scalable method of securing networks,
More informationInternational Call Services
International Call Services Affordable rates for business calls. Wherever you are in the world. We ve got plenty to say when it comes to staying in touch when you re overseas. We have agreements with 443
More informationReport on Government Information Requests
Report on Government Information July 1 - December 31, 2014 apple Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software
More informationEducation at a Glance. OECD Indicators. Annex: UOE Data Collection Sources
Education at a Glance OECD Indicators Annex: UOE Data Collection Sources UOE DATA COLLECTION National Sources 2013 UNESCO/OECD/EUROSTAT (UOE) data collection on education statistics. Australia: The Commonwealth
More informationTermination solutions Easily and reliably connect your wires
Termination solutions Easily and reliably connect your wires Sta-Kon Solderless crimp connectors Experience the Sta-Kon advantage! Thomas & Betts developed the first tool-applied solderless terminals and
More informationOffice Rents map EUROPE, MIDDLE EAST AND AFRICA. Accelerating success.
Office Rents map EUROPE, MIDDLE EAST AND AFRICA Accelerating success. FINLAND EMEA Office Rents H2 212 NORWAY Oslo 38.3 5.4% 7.% 295, SWEDEN Stockholm 44.7 4.5% 3.% 5, Tallinn 13.4 44,2 21. 5.25% 1.% 12,
More informationNetFlow Feature Acceleration
WHITE PAPER NetFlow Feature Acceleration Feature Description Rapid growth in Internet and intranet deployment and usage has created a major shift in both corporate and consumer computing paradigms. This
More informationIBM Global Services. IBM Maintenance Services managed maintenance solution for Cisco products
IBM Maintenance Services managed maintenance solution for Cisco products agenda The challenges of business connection The IBM/Cisco strategic alliance Introducing IBM Maintenance Services managed maintenance
More informationWelcome to Bell Reservationless Audio Conferencing. A guide to help you get started with your new Bell service
Welcome to Bell Reservationless Audio Conferencing A guide to help you get started with your new Bell service Contents Welcome to Bell Reservationless Audio Conferencing How to get started with Bell Reservationless
More informationSTATISTICS FOR THE FURNITURE INDUSTRY AND TRADE
STATISTICS FOR THE FURNITURE INDUSTRY AND TRADE Möbel Zahlen Daten STATISTICS FOR THE FURNITURE INDUSTRY AND TRADE 01/36 Economical growth in the regions of the world-economy Changes of the gross domestic
More informationCISCO CONTENT SWITCHING MODULE SOFTWARE VERSION 4.1(1) FOR THE CISCO CATALYST 6500 SERIES SWITCH AND CISCO 7600 SERIES ROUTER
PRODUCT BULLETIN NO. 2438 CISCO CONTENT SWITCHING MODULE SOFTWARE VERSION 4.1(1) FOR THE CISCO CATALYST 6500 SERIES SWITCH AND CISCO 7600 SERIES ROUTER NEW FEATURES New features of the Cisco Content Switching
More informationThe Fundamentals of Three-Phase Power Measurements. Application Note
The Fundamentals of - Power Measurements pplication ote pplication ote 0 120 240 360 Figure 1. -phase voltage wavefm. Figure 2. -phase voltage vects. 100Ω 100Ω Figure 4. -phase supply, balanced load -
More informationMotion Graphic Design Census. 10 hrs. motiongraphicdesigncensus.org. 9 hrs.
8 h 2010 Motion Graphic Design Census 10 hrs. motiongraphicdesigncensus.org 9 hrs. A Note on the Survey. First, let me apologize for the delay in getting this actually done and out to you. I bit off much
More informationInternational Financial Reporting Standards
International Financial Reporting Standards Of Growing Importance for U.S. Companies Assurance Services there is no longer a choice Three factors may influence your need to consider IFRS. First, many organizations
More informationCISCO METRO ETHERNET SERVICES AND SUPPORT
SERVICES OVERIVEW CISCO METRO ETHERNET SERVICES AND SUPPORT In the ever-changing communications market, incumbent service providers are looking for ways to grow revenue. One method is to deploy service
More informationU.S. Trade Overview, 2013
U.S. Trade Overview, 213 Stephanie Han & Natalie Soroka Trade and Economic Analysis Industry and Analysis Department of Commerce International Trade Administration October 214 Trade: A Vital Part of the
More informationRelease Notes: PowerChute plus for Windows 95 and Windows 98
: PowerChute plus for Windows 95 and Windows 98 These release notes supplement the User s Guide: PowerChute plus, Version 5.0.2, for Windows 95 and Windows 98 (pc98ug.pdf) and the Installation Guide: PowerChute
More informationThe VAT & Invoicing Requirements Update March 2012
The VAT & Invoicing Requirements Update March 2012 Indirect taxes are a massive potential expense. For buyers and sellers of goods and services, how invoices are prepared and processed can affect a company's
More informationJuly 2015. Figure 1. 1 The index is set to 100 in 2000. House prices are deflated by country CPIs in most cases.
July 2015 Globally, house prices continue a slow recovery. The Global House Price Index, an equally weighted average of real house prices in nearly 60 countries, inched up slowly during the past two years
More informationDigital TV Research. http://www.marketresearch.com/digital-tv- Research-v3873/ Publisher Sample
Digital TV Research http://www.marketresearch.com/digital-tv- Research-v3873/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am -
More informationCisco CNS NetFlow Collection Engine Version 4.0
Data Sheet Cisco CNS NetFlow Collection Engine Version 4.0 Cisco CNS is a suite of intelligence engines that work with device agents to create a programmable network. Cisco CNS extends the management plane
More informationBuilding a Global Internet Company: Driving Traffic to Your Site. Benjamin Edelman Harvard Business School
Building a Global Internet Company: Driving Traffic to Your Site Benjamin Edelman Harvard Business School Mumbai, India January 20, 2012 About me Assistant Professor, Harvard Business School Teaching:
More informationThe World s Most Competitive Cities. A Global Investor s Perspective on True City Competitiveness
The World s Most Competitive Cities A Global Investor s Perspective on True City Competitiveness A report by Site Selection magazine in cooperation with IBM Global Business Services The World s Most Competitive
More informationCISCO AIRONET POWER INJECTOR
DATA SHEET CISCO AIRONET POWER INJECTOR Cisco Aironet Power Injector products increase the deployment flexibility of Cisco Aironet wireless access points and bridges by providing an alternative powering
More informationGE Grid Solutions. Providing solutions that keep the world energized Press Conference Call Presentation November 12, 2015. Imagination at work.
GE Grid Solutions Providing solutions that keep the world energized Press Conference Call Presentation November 12, 2015 Press Conference Call Recording: Toll Free: +1 (855) 859-2056 Toll: +1 (404) 537-3406
More informationHP Technology Services HP NonStop Server Support
Reference guide HP Technology Services HP NonStop Server Support HP Global NonStop Solution Center (GNSC) Table of contents Global NonStop Solution Center... 2 Product support for HP NonStop and Neoview
More informationNITROGEN CHARGING KIT type PCM 11.2 E 04-11
NITROGEN CHARGING KIT type PCM 11.2 E 04-11 11.2.1 TECHNICAL DATA MAX OPERATING PRESSURE (PS): 400 BAR PRESSURE TEST (PT): 1.43 PS SCALE OF PRESSURE GAUGE: 4-10 - 16-25 - 60-100 - 250 (std.) - 400 bar
More informationBy Jim Dunbar Product Manager, Terminals & Splices and Tom Michielutti, Senior Product Engineer, Tyco Electronics, Harrisburg, PA
Electrical Terminals By Jim Dunbar Product Manager, Terminals & Splices and Tom Michielutti, Senior Product Engineer, Tyco Electronics, Harrisburg, PA Insulated and non-insulated closed barrel electrical
More information