Infor BI for Lawson/M3 Release Notes. Version: Published: October 2015

Transcription

1 Infor BI for Lawson/M3 Release Notes Version: Published: October 2015

2 Copyright 2015 Infor. All rights reserved. Important Notices The material contained in this publication (including any supplementary information) constitutes and contains confidential and proprietary information of Infor. By gaining access to the attached, you acknowledge and agree that the material (including any modification, translation or adaptation of the material) and all copyright, trade secrets and all other right, title and interest therein, are the sole property of Infor and that you shall not gain right, title or interest in the material (including any modification, translation or adaptation of the material) by virtue of your review thereof other than the non-exclusive right to use the material solely in connection with and the furtherance of your license and use of software made available to your company from Infor pursuant to a separate agreement, the terms of which separate agreement shall govern your use of this material and all supplemental related materials ("Purpose"). In addition, by accessing the enclosed material, you acknowledge and agree that you are required to maintain such material in strict confidence and that your use of such material is limited to the Purpose described above. Although Infor has taken due care to ensure that the material included in this publication is accurate and complete, Infor cannot warrant that the information contained in this publication is complete, does not contain typographical or other errors, or will meet your specific requirements. As such, Infor does not assume and hereby disclaims all liability, consequential or otherwise, for any loss or damage to any person or entity which is caused by or relates to errors or omissions in this publication (including any supplementary information), whether such errors or omissions result from negligence, accident or any other cause. Without limitation, U.S. export control laws and other applicable export and import laws govern your use of this material and you will neither export or re-export, directly or indirectly, this material nor any related materials or supplemental information in violation of such laws, or use such materials for any purpose prohibited by such laws. Trademark Acknowledgements The word and design marks set forth herein are trademarks and/or registered trademarks of Infor and/or related affiliates and subsidiaries. All rights reserved. All other company, product, trade or service names referenced may be registered trademarks or trademarks of their respective owners. Publication Information Release: Publication date: October 2015 Document Number: LBIRN-10600W-01

3 Contents This document describes features and enhancements included in Infor BI for Lawson/M3 10.x. These new features and enhancements are organized under the following headings: Infor BI for Lawson/M Where to look for documentation... 7 Documentation updates... 7 Configuration support changes... 8 Operating System Support... 8 Database Support... 8 Desktop PC support... 8 WebSphere Application Server Infor Lawson Framework Services... 9 System/User Settings Audit (FISMA-related feature)... 9 Central Device Management... 9 Dashboard banner Infor Lawson Reporting Services Exporting rights files Importing rights Extended Schedule Options for creating a report schedule Run Immediate option after creating a report schedule Infor Lawson Smart Notification System/User Settings Audit (FISMA-related feature) Infor BI for Lawson/M Product Name update Where to look for documentation Documentation updates Configuration support changes System Configuration Settings Infor Application Studio and Infor BI Dashboards now included Database Support Infor Lawson Framework Services Manual removal of expired users and roles Rights Administration Infor Lawson Reporting Services Rights Administrator role Schedule Import Rights Infor BI for Lawson Product Name update Where to look for documentation Documentation updates Configuration support changes Web browser Apache Tomcat Application Server Infor Lawson Reporting Services Secure File Transfer Protocol (SFTP) Infor BI for Lawson/M3 Release Notes 3

4 Infor Lawson BI Where to look for documentation Documentation updates Configuration support changes WebSphere Application Server Infor ViewPoint Lawson Budgeting and Planning Framework Services Application Studio Reporting Services Lawson Smart Reports Network Drive Support Smart Notification Improved memory allocation Infor Lawson BI Where to look for documentation Documentation updates Configuration support changes WebSphere Application Server SAP Crystal Reports Server Crystal Reports Server XI versions XI R2 and XI R3 SP Apache Tomcat Application Server Microsoft Internet Explorer Microsoft Windows Server Language support Database changes Microsoft SQL Server Framework Services changes Dashboard Audit Admin Reports Smart Notification Charting OLAP database support Lawson Role Migration Microsoft SQL Server Problems fixed in this release Lawson Business Intelligence Documentation Documentation Updates Installation Considerations Configuration Support Changes Web browser Language support Lawson Charting Reporting Services Lawson Role Migration Smart Notification Smart Notification Content Security using Reporting Services Rights definitions Lawson Business Intelligence Documentation Infor BI for Lawson/M3 Intelligence Release Notes

5 Documentation Updates Configuration Support Changes Web browser Database support Database support Application server Infor Workspace Installation Changes LBI Infocenter Framework Services Changes Infor Workspace Drillback Services Infor Workspace SendMessage Service Reporting Services Changes Reporting Services report auditing Smart Notification Changes Smart Notification auditing Problems fixed in this release Infor BI for Lawson/M3 Release Notes 5

6 6 Infor BI for Lawson/M3 Intelligence Release Notes

7 Infor BI for Lawson/M Where to look for documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation updates The following updates to documentation are included with this release. Document name Infor BI for Lawson Installation Guide System requirements update Infor Lawson Reporting Services Administrator and User Guide Infor Lawson Framework Services Administrator and User Guide Infor Lawson Smart Notification User and Administration Guide Updated for data source connection to an ADFS 3.0 authenticated server. Added documentation for Extended Schedule Options. Added documentation for Run Immediate option. Added documentation for Import/Export Rights Added documentation for System/User Settings Audit. Added documentation for Central Device Management. Added documentation for displaying the dashboard banner. Updated for data source connection to an ADFS 3.0 authenticated server. Added documentation for System/User Settings Audit. Infor BI for Lawson/M3 Release Notes 7

8 Configuration support changes Operating System Support Infor BI for Lawson now supports Microsoft Windows Server 2012 R2. JTs Customers can use Microsoft Windows Server 2012 R2 as their operation system for Infor BI for Lawson. Infor BI for Lawson Installation Guide Database Support Infor BI for Lawson now supports Microsoft SQL Server JTs Customers may now use Microsoft SQL Server 2014 as their Infor BI for Lawson database. Infor BI for Lawson Installation Guide Desktop PC support Infor BI for Lawson now supports Microsoft Windows 8.1. JTs Customers may now use Microsoft Windows 8.1 for end users. Infor BI for Lawson Installation Guide 8 Infor BI for Lawson/M3 Intelligence Release Notes

9 WebSphere Application Server 7.0 Infor Lawson BI no longer supports WebSphere Application Server 7.0. JTs Customers using WebSphere Application Server 7.0 must now use WebSphere Application Server 8.5 with minimum fix pack 5 as their application server. Infor BI for Lawson Installation Guide Infor Lawson Framework Services JTs System/User Settings Audit (FISMA-related feature) System/User Settings Audit is a logging capability of Framework Services which audits changes/deletions/additions on system/user settings, transfer of ownership, or sharing. Users can now adjust the System/User Settings Audit to capture changes to the system and user settings. Infor Lawson Framework Services Administrator and User Guide Central Device Management The Central Device Management page shows a list of all devices and enables administrators to edit or delete them, or to create a new device. Administrators can also create a new device to be added simultaneously to Framework Services, Reporting Services and Smart Notification. Multiple devices on the applications can also be deleted at the same time. JTs Users can now configure devices used in Framework Services, Reporting Service, and Smart Notification by using the Central Device Management page. Infor Lawson Framework Services Administrator and User Guide Infor BI for Lawson/M3 Release Notes 9

10 JTs Dashboard banner Framework Services now includes the functionality to display or hide the Infor banner. Customers can now toggle the dashboard banner to display or hide as needed. Infor Lawson Framework Services Administrator and User Guide Infor Lawson Reporting Services Exporting rights files Users can now export rights information that can be used in another instance of Reporting Services or other Lawson systems. Note: Rights data can be exported in CSV, XML, or JSON format. JTs Customers can now use Reporting Services rights data in other Lawson systems. Infor Lawson Reporting Services Administrator and User Guide 10 Infor BI for Lawson/M3 Intelligence Release Notes

11 Importing rights Users can now import rights information in two ways: File import JNDI mapping Previously, rights files could only be imported in CSV format. Now, users can also import files in XML and JSON format. Users can also provide a JNDI resource to connect to and query to receive the rights to import. JTs Users have additional ways to import rights information into Reporting Services. Infor Lawson Reporting Services Administrator and User Guide JTs Extended Schedule Options for creating a report schedule Users can now choose to use Extended Schedule Options to run reports based on a calendar interval trigger. Options include hourly, bi-weekly, and monthly scheduling. Users can use a calendar interval trigger to run reports. Infor Lawson Reporting Services Administrator and User Guide JTs Run Immediate option after creating a report schedule After creating and saving a report schedule, users can now select a Run Immediate option to process a report at once. The feature does not trigger or change the schedule that was created. Users can now run and process a report at once without changing the report s schedule. Infor Lawson Reporting Services Administrator and User Guide Infor BI for Lawson/M3 Release Notes 11

12 Infor Lawson Smart Notification System/User Settings Audit (FISMA-related feature) System/User Settings Audit is a logging capability of Smart Notification which audits changes/deletions/additions on system/user settings, transfer of ownership, or sharing. Users can now adjust the System/User Settings Audit to capture changes to the system and user settings. PTs Infor Lawson Smart Notification User and Administration Guide 12 Infor BI for Lawson/M3 Intelligence Release Notes

13 Infor BI for Lawson/M Product Name update Previously, Infor BI for Lawson was Infor Lawson BI. The product remains the same, containing the applications Infor Lawson Framework Services, Infor Lawson Reporting Services, and Infor Lawson Smart Notification. The product name has been updated in the documentation. Where to look for documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation updates The following updates to documentation are included with this release. Document name Infor BI for Lawson Installation Guide System requirements update Infor Lawson Reporting Services Administrator and User Guide Infor Lawson Framework Services Administrator and User Guide Infor Lawson Smart Notification User and Administration Guide Changes to system configuration instructions Added a new type of user (Rights Administrator responsible for managing bursting rights) Added new procedure for automated scheduling of import of rights files Changed two instances of sysconfig.xml to system configuration Added procedure for manually removing expired users and roles Edits based on moving all sysconfig.xml entries to the database. Edits based on moving all sysconfig.xml entries to the database. Infor BI for Lawson/M3 Release Notes 13

14 Document name Changed instances of sysconfig.xml to system configuration Deleted Appendix G: Sysconfig.xml 14 Infor BI for Lawson/M3 Intelligence Release Notes

15 Configuration support changes System Configuration Settings Previously, system configuration settings resided in the sysconfig.xml file. Beginning with Infor BI for Lawson , system configuration settings reside in the database. Customers will use the System Configuration Settings to make changes to Infor BI for Lawson configuration. Customers will no longer use the sysconfig.xml file to make these changes. After upgrading to , the sysconfig.xml file will be backed-up and renamed to syscfg.bak for both Frameworks Services and Smart Notification. Note: Infor recommends you move this file to a secure location outside the installation directory as it may contain user and password information. JTs Infor BI for Lawson Installation Guide Infor Application Studio and Infor BI Dashboards now included Introductory licenses of the Infor Application Studio and Infor BI Dashboards products are now included with Infor BI for Lawson packaging. Customers have additional BI tools available for their use. These products are delivered as a separate install. Note: There is currently no integration of LBI and BI Dashboards. Framework Services has a service to render Application Studio reports in a Dashboard. JTs See the documentation for Infor BI Application Studio and Infor BI Dashboards for more information on these products. Infor BI for Lawson/M3 Release Notes 15

16 Database Support Infor BI for Lawson now supports Oracle Database 12c. JTs Customers may now use Oracle 12c as their Infor BI for Lawson database. Infor BI for Lawson Installation Guide Infor Lawson Framework Services JTs Manual removal of expired users and roles The automatic deletion of expired users and roles in the synchronization process has been removed. Customers may manually select expired users and roles for deletion and select which user to transfer ownership of content to. Infor Lawson Framework Services Administrator and User Guide 16 Infor BI for Lawson/M3 Intelligence Release Notes

17 JTs Rights Administration Infor Lawson Framework Services now has a new service that allows customers to set up navigation to the new Rights Management forms. Customers can navigate to the Rights Management forms from the Tools dashboard in Framework Services. Infor Lawson Framework Services Administrator and User Guide Infor Lawson Reporting Services Rights Administrator role A Rights Administrator role has been added for Infor Lawson Reporting Services. Customers may assign a Reporting Services Rights Administrator role, which is responsible for managing bursting rights. Note: There is a new service in Framework Services that allows you to set up navigation to the new Rights Management forms. JTs Infor Lawson Reporting Services Administrator and User Guide JTs Schedule Import Rights Infor Lawson Reporting Services has enabled the automated import of rights files. Customers may set a schedule for the automatic import of CSV files containing rights information. Infor Lawson Reporting Services Administrator and User Guide Infor BI for Lawson/M3 Release Notes 17

18 Infor BI for Lawson Product Name update Previously, Infor BI for Lawson was Infor Lawson BI. The product remains the same, containing the applications Infor Lawson Framework Services, Infor Lawson Reporting Services, and Infor Lawson Smart Notification. The product name has been updated in the documentation. Where to look for documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation updates The following updates to documentation are included with this release. Document name Infor BI for Lawson Installation Guide Updated system requirements Infor Lawson Reporting Services Administrator and User Guide Infor Lawson Framework Services Administrator and User Guide Infor Lawson Smart Notification User and Administration Guide Updated for new product name. Added instructions for Secure File Transfer Protocol. Updated for new product name. Updated for new product name. Updated for new product name. 18 Infor BI for Lawson/M3 Intelligence Release Notes

19 Configuration support changes Web browser Lawson Business Intelligence supports Microsoft Internet Explorer JTs Customers may use Microsoft Internet Explorer 11.0 for Lawson Business Intelligence. Infor BI for Lawson Installation Guide Apache Tomcat Application Server 7.0 JTs Infor Lawson BI no longer supports Apache Tomcat application server. Customers using Tomcat in their test environments must use WebSphere as their application server. Infor BI for Lawson Installation Guide Infor Lawson Reporting Services Secure File Transfer Protocol (SFTP) Infor Lawson Reporting Services now supports the use of Secure File Transfer Protocol (SFTP). Customers may now choose to enable or disable the SFTP when publishing BackOffice reports. PTs To use this feature, SFTP must to be enabled on the Infor Lawson System Foundation/BackOffice server. The home directory of SFTP must be the same as FTP s home directory. The default port for SFTP is 22. See the Infor Lawson Reporting Services Administrator and User Guide. Infor BI for Lawson/M3 Release Notes 19

20 Infor Lawson BI Where to look for documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation updates The following updates to documentation are included with this release. Document name Infor Lawson BI Installation Guide Added instructions for configuring Lawson Smart Reports to work with Infor Lawson BI Updated system requirements Framework Services Administrator and User Guide Added information on Application Studio Reporting Services Administrator and User Guide Added instructions for enabling Lawson Smart Reports in Reporting Services Added information on Network Drive support 20 Infor BI for Lawson/M3 Intelligence Release Notes

21 Configuration support changes JTs WebSphere Application Server Infor Lawson BI now supports WebSphere Application Server 8.5 with minimum fix pack 5. Customers who use WebSphere Application Server 8.5 as their application server, must apply fix pack 5 prior to Infor Lawson BI installation. Infor Lawson BI Installation Guide JTs Infor ViewPoint As of Infor Lawson BI 10.3, ION Application Studio 10.4 will replace Infor ViewPoint as the Infor tool for analytics solutions. Customers can still use Infor ViewPoint with Infor Lawson BI 10.2.x and lower. Additionally, customers can use Application Studio, Infor s multisource OLAP and relational reporting solution. Infor ViewPoint Guide Installation and Configuration Guide JTs Lawson Budgeting and Planning As of Infor Lawson BI 10.3, Infor Corporate Performance Management (CPM) 10.4 replaces the Lawson Budgeting and Planning (LBP). Customers can still use Lawson Budgeting and Planning with Infor Lawson BI 10.2.x and lower. Additionally, customers can use Infor Corporate Performance Management (CPM). Lawson Budgeting and Planning Installation Guide Infor BI for Lawson/M3 Release Notes 21

22 Framework Services Application Studio Infor Lawson BI now supports Application Studio. Customers can register Application Studio as a new application in Framework Services. Customers who use Application Studio can now render Application Studio reports on Framework Services dashboards. Note: Single Sign-on is only supported between Infor Lawson BI and Application Studio when Application Studio is using Windows authentication. JTs See Framework Services Administrator and User Guide for information on Rendering Application Studio reports. Reporting Services Lawson Smart Reports Infor Lawson BI now supports the use of Lawson Smart Reports in Reporting Services and provides the bursting capability for Lawson Smart Reports. Lawson Smart Reports (LSR) is a feature that allows users to generate reports with enhanced output by utilizing page breaks, frames, and graphics. Customers can configure LSR to work with Reporting Services. PTs Reporting Services provides the bursting capability by using the rights on top of Lawson Smart Reports. Note: For Infor Lawson customers using Lawson Smart Reports, you must have the latest version (including patches) of Infor Lawson System Foundation x and ensure that LSR is enabled. Infor Lawson BI Installation Guide, the Reporting Services Administrator and User Guide, and Infor Lawson Administration: Jobs and Reports. 22 Infor BI for Lawson/M3 Intelligence Release Notes

23 Network Drive Support Infor Lawson BI now supports delivery of Reporting Services reports to network drive locations. Customers can now deliver a specific Reporting Services report to a shared network drive location. This functionality will allow organizations to deliver and manage report documents on shared network drive locations. Note: Reports will also be delivered to the Lawson directory. JTs See Framework Services Administrator and User Guide for information on creating and maintaining a device type and the Reporting Services Administrator and User Guide Smart Notification Improved memory allocation Previously, when a notification owner launched Smart Notification, the application loaded into memory the owner s alerts along with all the alert details. This may have caused a large memory utilization of JVM that resulted in out of memory errors. With Infor Lawson BI 10.3, many unnecessary cached object definitions are no longer stored upfront in the memory allocation. End users will have improved memory allocation while using Smart Notification without any performance degradation. PTs Infor BI for Lawson/M3 Release Notes 23

24 Infor Lawson BI Where to look for documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation updates The following updates to documentation are included with this release. Document name Infor Lawson BI Installation Guide Combined four separate installation guides into one. Framework Services Administrator and User Guide Reporting Services Administrator and User Guide Smart Notification User and Administration Guide Updated system requirements Changes for branding Added instructions for Tomcat installation Added instructions for Dashboard Auditing Added instructions for Admin Reports Changes for dashboard interface Changes for branding Change for branding Instructions for charts interface Instructions for OLAP data source Lawson Role Migration Configuration Guide Updated configuration instructions 24 Infor BI for Lawson/M3 Intelligence Release Notes

25 Configuration support changes WebSphere Application Server Infor Lawson BI now supports WebSphere Application Server 8.5. JTs Customers can now use WebSphere Application Server 8.5 as their application server. Infor Lawson BI Installation Guide SAP Crystal Reports Server 2011 Infor Lawson BI now supports SAP Crystal Reports Server Customers can now use SAP Crystal Reports Server 2011 as their reports sever. Important: For upgrading customers, Infor recommends that you install and test the new version of Crystal Report Server in a test environment prior to installing the Infor Lawson BI upgrade in production to ensure all reports function as designed. JTs Infor Lawson BI Installation Guide Crystal Reports Server XI versions XI R2 and XI R3 SP3 Infor Lawson BI no longer supports Crystal Reports Server XI versions XI R2 and XI R3 SP3. Customers must upgrade to SAP Crystal Reports Server Important: For upgrading customers, Infor recommends that you install and test the new version of Crystal Report Server in a test environment prior to installing the Infor Lawson BI upgrade in production to ensure all reports function as designed. JTs Infor Lawson BI Installation Guide Infor BI for Lawson/M3 Release Notes 25

26 Apache Tomcat Application Server 7.0 Infor Lawson BI now supports Apache Tomcat application server. Customers can now use Apache Tomcat as their application server. Customers can use the Tomcat server bundled with the Infor Lawson BI installation program. Note: Infor recommends that customers use the Tomcat application server for test environments only. Tomcat is not for use with Lawson Single Signon integration. JTs Infor Lawson BI Installation Guide Microsoft Internet Explorer 7.0 Infor Lawson BI no longer supports Microsoft Internet Explorer 7.0. JTs Customers can use Microsoft Internet Explorer 8.0 or 9.0 as their web browser. Infor Lawson BI Installation Guide Microsoft Windows Server 2012 Infor Lawson BI now supports Microsoft Windows Server JTs Customers can use Microsoft Windows Server 2012 as their operation system for Infor Lawson BI. Infor Lawson BI Installation Guide 26 Infor BI for Lawson/M3 Intelligence Release Notes

27 Language support Infor Lawson BI supports Brazilian Portuguese. Customers may use Brazilian Portuguese as their language for Infor Lawson BI. PTs See the Framework Services Administrator and User Guide for information on changing your language preference. Database changes Microsoft SQL Server 2012 Infor Lawson BI now supports Microsoft SQL Server JTs Customers can now use Microsoft SQL Server 2012 as their database server for Infor Lawson BI. Infor Lawson BI Installation Guide Framework Services changes JTs Dashboard Audit Dashboard auditing allows you to track what dashboards users are accessing. If auditing is enabled, Framework Services will automatically capture and log information to a database table called FS_AUDIT in the Framework Services database. Customers can use information from Dashboard Auditing to monitor what Framework Services content users access and the frequency of that access. See Setting up dashboard auditing in the Framework Services Administrator and User Guide. Infor BI for Lawson/M3 Release Notes 27

28 Admin Reports Use Admin Reports to audit activity and content for Framework Services, Reporting Services, and Smart Notification. Download the zip file containing the reports from the Product Download page. The reports contained in the zip file are intended to be used with the Infor Lawson BI release and higher. Customers can use information from the reports to audit activity and frequency of use for Framework Services, Reporting Services, and Smart Notification. Note: Infor recommends that you make a local copy of any report that you publish since these reports could be updated in the future. JTs See Using Admin Audit Reports in the Framework Services Administrator and User Guide. Smart Notification Charting Smart Notification now includes a charting interface for creating and modifying charts included with notification alerts. Customers can use the Infor Charts interface to easily modify the charts they sent with notification alerts. PTs See Creating and Modifying Notifications and Using FusionCharts in the Smart Notification User and Administration Guide. OLAP database support Smart Notification now supports the use of OLAP database for Smart Notification data sources and InfoSets. Customers can create data sources and InfoSets using an OLAP database connection. PTs See Creating and Modifying Data Sources and Creating and Modifying InfoSets in the Smart Notification User and Administration Guide. 28 Infor BI for Lawson/M3 Intelligence Release Notes

29 Lawson Role Migration Microsoft SQL Server 2012 The Lawson Role Migration tool now supports Microsoft SQL Server Customers can use Microsoft SQL Server 2012 as their database for Lawson Role Migration. PTs Lawson Role Migration Configuration Guide. Problems fixed in this release A listing of problems fixed in this release may be available on the Download page on the Infor Xtreme portal. Infor BI for Lawson/M3 Release Notes 29

30 30 Infor BI for Lawson/M3 Intelligence Release Notes

31 Lawson Business Intelligence Documentation Throughout these release notes, references to specific documents and Lawson Knowledge Base articles may be provided to help you locate more detailed information. Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation Updates The following updates to documentation are included with this release. Document Name Lawson Business Intelligence Installation Guide Upgrade instructions for x to System Requirements and prerequisites updates Smart Notification User and Administration Guide Lawson Role Migration Configuration Guide Removed Scorecard installation instructions. Customers needing to refer to Scorecard installation and/or troubleshooting instructions should see earlier releases of the documentation. Updated instructions for Charting to reflect change to FusionCharts support. New release. Installation Considerations If you are using Lawson Business Intelligence with Kerberos authentication, a single sign-on connection to Lawson Smart Office is not supported. Infor BI for Lawson/M3 Release Notes 31

32 Configuration Support Changes Web browser Lawson Business Intelligence supports Firefox 8.0 and 9.0. Customers may use Firefox 8.0 and 9.0 for Lawson Business Intelligence. PTs To use Firefox for LBI, customers will need to adjust the settings. In the Firefox browser, navigate to Tools > Options > Content > Advanced > Enable Raise or lower windows. Note: Firefox has its own language settings that is separate from the Windows Region and Language Settings. If you plan to use Firefox combined with Arabic, you will need to add Arabic to your list of preferred languages in the Firefox browser and move it to the top of the list. See the Lawson Business Intelligence Installation Guide Language support Lawson Business Intelligence supports Arabic. Customers may use Arabic as their language for Lawson Business Intelligence. PTs Note: While all administrative panels have been translated, not all have been adjusted to read right to left in Arabic. See the Framework Services Administrator and User Guide for information on changing your language preference. 32 Infor BI for Lawson/M3 Intelligence Release Notes

33 Lawson Charting Lawson Smart Notifications now uses FusionCharts as its charting engine. This includes a full set of charting properties available to customize the rendered charts. Customers will now use FusionCharts, which is an automatic installation with Lawson Business Intelligence. PTs To learn more about FusionCharts, view their online documentation at: ChartFx will no longer be delivered with Lawson Business Intelligence starting with release10.1. Note: Upgrading customers may opt to keep Lawson Charting on their test server to compare and adjust their existing charts with FusionCharts Customers should no longer use Lawson Charting in production environment See the Lawson Business Intelligence Installation Guide Reporting Services Lawson Role Migration Lawson Role Migration is a tool that allows users to apply rights from Lawson Business Intelligence Reporting Services to MS OLAP roles. Customers can use a new.net tool, Lawson Role Migration, to apply Reporting Services rights to MS OLAP roles. To use this tool, customers must have Reporting Services installed and be using Microsoft SQL 2008 R2 Server. PTs See the Reporting Services Administrator and User Guide and the Lawson Role Migration Configuration Guide. Infor BI for Lawson/M3 Release Notes 33

34 Smart Notification Smart Notification Content Security using Reporting Services Rights definitions Customers will be able to secure content in InfoSets against the Reporting Structures defined in Reporting Services. Any alert that is rendered against an InfoSet with a Reporting Services structure association will use the Rights for the requesting user to secure the InfoSet Content. Customers can apply Reporting Services Structures against previously defined or newly added InfoSets. The current Alert Filtering is still supported. PTs Note: Rights will only apply to alerts that are not currently using the InfoSet Bursting definition. Those alerts must continue to use the current process. See the Smart Notification User and Administration Guide. 34 Infor BI for Lawson/M3 Intelligence Release Notes

35 Infor BI for Lawson/M3 Release Notes 35

36 Lawson Business Intelligence Documentation Throughout these release notes, references to specific documents and Knowledge Base articles may be provided to help you locate more detailed information. Product documentation is available on the Infor Xtreme portal. You can find documentation posted to the product records on the Download Products page. Look here first for installation guides and release notes. You can browse or search for product documentation on the Documentation page. For questions or feedback, Documentation Updates The following updates to documentation are included with this release. Document Name Lawson Business Intelligence Installation Guide Upgrade instructions for x to System Requirements and prerequisites updates Reporting Services Administrator and User Guide Smart Notification User and Administration Guide Framework Services Administrator and User Guide Updated infocenter installation instructions Reporting Services document auditing Smart Notification auditing Workspace Drillback Services Workspace SendMessage Service 36 Infor BI for Lawson/M3 Intelligence Release Notes

37 Configuration Support Changes Web browser Lawson Business Intelligence supports Microsoft Internet Explorer 9.0. Customers may use Microsoft Internet Explorer 9.0 for Lawson Business Intelligence. PTs See the Lawson Business Intelligence Installation Guide Database support Lawson Business Intelligence no longer supports Microsoft SQL Server Customer using Microsoft SQL Server 2005 must upgrade to Microsoft SQL Server 2008 or Microsoft SQL Server 2008 R2 as their Lawson Business Intelligence database. PTs See the Lawson Business Intelligence Installation Guide Database support Lawson Business Intelligence no longer supports IBM DB2 databases. Customer using IBM DB2 must use either Microsoft SQL Server 2008 or Microsoft SQL Server 2008 R2 or Oracle 11gR2 as their Lawson Business Intelligence database. PTs See the Lawson Business Intelligence Installation Guide Infor BI for Lawson/M3 Release Notes 37

38 Application server Lawson Business Intelligence no longer supports WebSphere Application Server 6.1. Customers using WebSphere Application Server 6.1 must upgrade to WebSphere 7.0, Fix Pack 11 or higher. PTs See the Lawson Business Intelligence Installation Guide Infor Workspace Lawson Business Intelligence now can run in Infor Workspace. LBI dashboards and Reporting Services Report Lists now have Infor styling. To run Lawson Business Intelligence in the Infor workspace, customers will need to install the S3 Plugins for Infor Workspace after completing the Lawson Business Intelligence installation. PTs See the Lawson Business Intelligence Installation Guide 38 Infor BI for Lawson/M3 Intelligence Release Notes

39 Installation Changes LBI Infocenter The LBI infocenter has a syntax change to its context root. To access the updated documentation, customers must perform a new installation of the infocenter using the updated context root and directory. PTs See the Lawson Business Intelligence Installation Guide Framework Services Changes PTs Infor Workspace Drillback Services This service allows LBI content to be passed as parameters to another embedded Workspace Application. Customers will have the ability to create services for the Workspace left-hand side plugins. See the Framework Services Administrator and User Guide PTs Infor Workspace SendMessage Service This service allows LBI content to be passed to a listening web part as a named value pair parameters. Customers will have the ability to create services for the Workspace righthand side web parts. See the Framework Services Administrator and User Guide Infor BI for Lawson/M3 Release Notes 39

40 Reporting Services Changes PTs Reporting Services report auditing Reporting Services now supports report auditing. Customers can now track what users are viewing, obtain estimates on rendering times, and see what filters, rights, and parameters users apply to their requests. See the Reporting Services Administrator and User Guide. Smart Notification Changes PTs Smart Notification auditing Smart Notification now supports auditing. Customers can now track what users are viewing, obtain estimates on rendering times, and see what filters, and parameters users apply to their requests. See the Smart Notification User and Administration Guide. Problems fixed in this release A listing of problems fixed in this release may be available on the Download page on the Infor Xtreme portal. 40 Infor BI for Lawson/M3 Intelligence Release Notes