DOREL ASIA SIDEBOARD BUFFET. Model No: WM3470 UPC CODE:

Transcription

1 DOREL ASIA Model No: UPC CODE: NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: / / DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. NEED Tel #: HELP! CALL US das@dorel.com FOR ASSISTA Fax #: DO NOT RETURN PROD DAS@DOREL.C

2 CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No Albert-Hudon Boulevard, Suite 0 Montreal, Quebec Canada HG 3L das@dorel.com * Ensure that all parts and components are present before beginning assembly. * Assemble on soft surface to prevent damage to the product finish. * Read all instructions before using the buffet. * DO NOT use the unit if it is damaged or broken. * Phillips head screwdriver is not included. * DO NOT use power tools. * Caution: Adult assembly required. * Assembly will require 2 people * Estimated assembly time: 30 minutes NOTE CARE AND CLEANING Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture. MAINTENANCE Check bolts/screws periodically and tighten them if necessary. DOREL ASIA LIMITED WARRANTY Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. WARNING: Should this product become damaged, and/or components are broken or missing, DO NOT USE.

3 HARDWARE LIST NOTE: A Phillips head screwdriver (not included) is needed to install all screws and cam locks. - -

4 PARTS LIST TOP RAIL MIDDLE DIVIDER CENTER RAIL CENTER RAIL CENTER SHELF CENTER RAIL SIDE SHELF CENTER RAIL - 2 -

5 STEP Insert wood dowels () into middle divider (B). Attach top rails (A) to middle divider (B) with flat head screws (). Insert cam bolts () and wood dowels () into right side panel (E). Insert cam locks () into top rails (A) and back upper rail (F). Fasten top rails (A) and back upper rail (F) to right side panel (E) by rotating cam locks () /2 turn clockwise. A A B B B A A F E - 3 -

6 STEP 2 Insert wood dowels () into center rails (H) and attach it to back upper rail (F). Slide the back panels (G) into the grooves of right side panel (E), back upper rail (F) and center rails (H). Insert cam bolts () and wood dowels () into right side panel (E). Insert cam lock () into back lower rail (I). Fasten back lower rail (I) to right side panel (E) and back panels (G) by rotating cam locks () /2 turn clockwise. I G H G F H G E - 4 -

7 STEP 3 Insert wood dowels () and cam bolts () into left side panel (J). Insert cam locks () into rails (A, F & I) as shown. Fasten left side panel (J) to the assembled unit by rotating cam locks () /2 turn clockwise. J A F G I G E G - 5 -

8 STEP 4 Insert wood dowels () into left divider (C) and right divider (D). Attach left divider (C) and right divider (D) to top rail (A) with flat head screws (). Turn the buffet right side up. Insert barrel nuts (4) into side panels (J & E), and dividers (C & D). Insert wood dowels () into dividers (C & D) and top rail (A). Attach bottom panel (K) to the assembled unit with hex socket head bolts (). Use Allen key (7) to tighten hex socket head bolts (). E J D 7 C K A CD J E DC - 6 -

9 STEP 5 Insert wood dowels () and cam bolts () into top panel (L). Insert cam locks () into left side panel (J), middle divider (B) and right side panel (E). Fasten top panel (L) to the assembled unit by rotating cam locks () /2 turn clockwise. L J - 7 -

10 STEP 6 Attach drawer sides (O&P) to drawer front (M) with flat head screws (). Slide drawer bottom (Q) into the grooves of the drawer sides (O&P) and drawer front (M). Attach drawer back (R) to drawer sides (O&P) with flat head screws (). Attach knob (3) to drawer front (M) with round head screws (2). Repeat this step to assemble the other drawer using drawer front (N). Insert two drawers into the buffet. R P Q 2 N O

11 STEP 7 Attach magnets (2) to left divider (C) and right divider (D) with round head bolts (3). Attach plate (7) to the door panel (S&T) with flat head screws (6). Attach left door (S) to left side panel (J) and right door (T) to right side pane (E) with flat head screws (6). Use a Phillips head screwdriver (not included) to tighten all screw and head bolts

12 STEP Attach knobs (3) to left door (S) and right door (T) with round head screws (2). Use a Phillips head screwdriver (not included) to tighten screws (2). Insert shelf supports (5) into dividers (C&D) and side panels (J&E). Place shelves (U&V) onto the shelf supports (5) as shown below

13 STEP Insert the wood dowels (4) into center shelves (U) and bottom panel (K). Place the wine racks (W) onto the center shelves (U) and bottom panel (K). - -

14 CAUTION: "This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability causing possible injury." Product Maximum Weights 50 lbs 5 lbs 5 lbs lbs per Shelf / Rack That's it! You've finished assembling your buffet. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge Tel #: das@dorel.com Fax #:

15 MODEL #: Customer Service BA B D PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number Customer Service Fax Number das@dorel.com Request Date: Name: Shipping Address: Street & Number: City & State: Zip Code: Day Time Phone Number: (including area code) Date & Place of Purchase: Part(s) description and quantity: (Please be sure to list model number or SKN number) Customer Service Representative Mailing Address: Customer Service Department No. 43, 2345 Albert-Hudon Boulevard, Suite 0, Montreal, QC, Canada, HG 3L