IGNITE WIRELESS SPEAKER

Transcription

1 1 kitsound.co.uk Li-PO Do not dispose of Lithium Polymer batteries with general waste. Please return it to battery recycling collection point JB.2666 / Made in China. KitSound 2013 Christchurch, Dorset. BH23 4FL IGNITE WIRELESS SPEAKER USER MANUAL 1

2 We are craftspeople. We are musicians. We are KitSound And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We ll settle for nothing less. 2 3

3 At KS we believe your music deserves to be showcased on great quality products that don t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that s worth celebrating. 4 5

4 Charging the battery LED indicator The Ignite s built-in rechargeable lithium battery should only be charged when the unit is switched off. Connect one end of the USB power cable to the charging port of the Ignite and connect the other end to your PC or USB mains adaptor. The battery will start charging. It takes approximately 4 hours to fully charge the battery Whilst charging, the LED will flash red When fully charged, the LED will turn off A fully charged unit has up to 7 hours of playback time If the Ignite is paired to an iphone, ipod touch or ipad, the battery level of the speaker will be showing on the top notification bar. There is an LED light on the front of the Ignite. Please see below for what each LED indication means. - LED off: Power OFF/Sleep mode (if after 10 minutes no music input from Bluetooth device)/full charge - Solid blue: Power ON (Bluetooth not paired/aux mode) - Flashing blue/red: Pairing mode - Quick flashing red with tone sound: Low battery level - Flashing red: Charging - Flashing blue: Device paired (blue light will stop flashing after 3 minutes even when connected and playing) Note: If there is no Bluetooth connection after 25 minutes, the Ignite will automatically turn off. Simply switch the Ignite OFF and then ON to turn back on again. 6 7

5 Bluetooth pairing 1. Switch the power button to the ON position, then press and hold the multi-function button for 5 seconds and the indicator light will flash red and blue alternately. 2. Search for the system with your Bluetooth device and you should see Ignite. Enter the password 0000 if requested. 3. When the pairing is successful, the Bluetooth indicator light will flash blue slowly. 4. The Ignite can hold six paired devices in its memory. You can pair more than six devices, but the memory will never contain more than six. When the memory is full and an additional device is paired, the first device that was paired is deleted from the memory and replaced with the newly paired device. Note: If you want to clear the memory of all paired devices, turn the Ignite ON then press and hold the Vol- and Vol+ for about 5 seconds. The light will then flash red and blue, meaning the memory has been cleared. The Ignite is then in pairing mode, ready for a new device. 8 9

6 Stereo pairing For twice the power, you can pair two Ignites together to create true stereo sound. Please follow these instructions to pair two Ignites together: 1. Turn on both Ignite speakers 2. Put both speakers into stereo pairing mode by holding the and + buttons 3. The speakers will beep to indicate that they are pairing to each other 4. After about 20 seconds the light will flash blue slowly 5. Put one Ignite into pairing mode. This Ignite will then be the master speaker 6. Search for the Ignite with your Bluetooth device and you should see Ignite. Enter the password 0000 if requested 7. The Ignites will then be connected to your device and will play in stereo Note: If your device has previously been paired to either or both of the Ignite speakers, it is advisable to delete them from your list of Bluetooth devices before carrying out the stereo pairing procedure above

7 Using the speaker In Bluetooth mode, volume change is done on both the speaker and the device you are playing from. In aux mode, volume and play/pause functions can only be done on the device you are playing from. 1. (Vol+) Press + on the speaker 2. (Vol-) Press - on the speaker 3. (Play/Pause) Press the (Your device will require AVRCP Bluetooth profile for this function to work) Other information Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others so you may need to reduce the volume if you experience distortion

8 Aux-in Use a 3.5 mm aux cable to connect your Bluetooth speaker through the AUX socket on the back of the unit. Note: When you plug the 3.5 mm aux cable into the AUX socket, the current Bluetooth connection will disconnect. When you unplug the aux cable, the Bluetooth connection will resume. Hands-free When you have an incoming call, the music will pause. Answer the call: Press the End the call: Press the once once Call waiting: Touch and release the twice in succession to put the first call on hold and answer the incoming call. Repeat to switch back to the first call Note: You can also use your mobile phone controls for the above functions

9 Care and maintenance Wipe the unit with a soft dry dust cloth. Do not use any wax, polish sprays or abrasive cleaners on it. Caution: Never allow any water or other liquids to get inside the unit while cleaning. Specifications Frequency response: 50 Hz 18 khz Output RMS: 3 W 4 ohm Drivers: 40 mm Speaker magnet: NdFeB S/N: 80 db Output db 1 1 m: 88 db Connections: Bluetooth/3.5 mm stereo jack Bluetooth: v2.1 Bluetooth range: up to 10 m Stereo pairing range: up to 4 m Bluetooth profiles: A2DP, AVRCP, HFP & HSP Play/talk time: up to 10 hours Unit size: H73 x W60 x L150 (mm) Battery capacity: 1000 mah DC input voltage: 5 V Weight: 450 g 16 17

10 Box contents KS Ignite Bluetooth portable speaker Case USB charge cable User manual 3.5 mm aux cable Troubleshooting We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: 18 19