Bolts & Hardware. Hardware & Fastening Solutions. Hex Head Cap Screws. Rod Coupling Nuts... Page 35. Slotted Castle Nuts...
|
|
|
- Jack Barnaby Hart
- 7 years ago
- Views:
Transcription
1 Machine Screw Hex Nuts Bolts & Hardware Hex Head Cap Screws Rod Coupling Nuts... Page 35 Coarse Thread... Pages 8-16 Economy Coupling Nuts... Page 35 Hex Head Cap Screws Slotted Castle Nuts... Page 36 Fine Thread... Pages Acorn Nuts... Page 37 Tap Bolts Coarse Thread... Pages Hex Lock Nuts - Coarse Thread... Page 37 Serrated Flange Bolts Hex Lock Nuts - Fine Thread... Page 38 Coarse Thread... Page 24 Jam (Thin) Nylon Hex Nuts Flange Bolts - Grade 8 - Coarse Thread (USS) - Coarse Thread... Page 38 Fine Thread (SAE)... Page 25 Jam (Thin) Nylon Hex Nuts Carriage Bolts... Pages Fine Thread... Page 38 Carriage Bolts - Ribbed Neck... Page 29 Top Lock Nuts - Grade C - Bottom Rail Bolt Kits... Page 29 Zinc Plated... Page 39 Plow Bolts... Page 30 Locking Flange Nuts - Grade G... Page 39 Domed Head Plow Bolts... Page 31 Wing Nuts... Page 39 Elevator Bolts... Page 31 Washers SAE... Page 40 Coarse Thread... Page 32 Machine Screw Hex Nuts Washers USS... Page 40 Lock Washers... Page 41 Fender Washers... Page 41 Fine Thread... Page 32 Extra-Thick Fender Washers - Standard Finished Hex Nuts... Page 32 Zinc Plated... Page 42 Hex Nuts... Page 33 Hi-Collar Lockwashers... Page 42 Serrated Flange Locking Nuts... Page 33 U-Bolt Washers - Grade 8 - Jam (Thin) Nuts... Page 34 Plain Finish... Page 42 Heavy Hex Nuts... Page 34 Threaded Rods - Coarse Thread... Page 43 Keps Nuts... Page 35 ~ 7 ~
2 P: F: HEX HEAD CAP SCREWS COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /4-20 X 1/ /4-20 X 3/ /4-20 x /4-20 X 1-1/ /4-20 X 1-1/ /4-20 X 1-3/ /4-20 X /4-20 X 2-1/ /4-20 X 2-1/ /4-20 X 2-3/ /4-20 X /4-20 X 3-1/ /4-20 X 3-1/ /4-20 X 3-3/ /4-20 X /4-20 X 4-1/ /4-20 X /16-18 X 1/ /16-18 X 3/ /16-18 X /16-18 X 1-1/ /16-18 X 1-1/ /16-18 X 1-3/ /16-18 X /16-18 X 2-1/ /16-18 X 2-1/ /16-18 X 2-3/ /16-18 X /16-18 X 3-1/ /16-18 X 3-1/ /16-18 X 3-3/ /16-18 X /16-18 X 4-1/ /16-18 X /16-18 X 5-1/ /16-18 X *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 8 ~
3 HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /8-16 X 1/ n/a /8-16 X 3/ /8-16 X /8-16 X 1-1/ /8-16 X 1-1/ /8-16 X 1-3/ /8-16 X /8-16 X 2-1/ /8-16 X 2-1/ /8-16 x 2-3/ /8-16 X /8-16 X 3-1/ /8-16 X 3-1/ /8-16 X 3-3/ n/a /8-16 X /8-16 X 4-1/ /8-16 X n/a /8-16 X 5-1/ n/a /8-16 X /8-16 X 6-1/ n/a /8-16 X n/a /8-16 X 7-1/ n/a /8-16 X n/a n/a /8-16 X 8-1/2 n/a n/a n/a /8-16 X 9 n/a n/a n/a /8-16 X 10 n/a n/a n/a /16-14 X 3/ n/a /16-14 X n/a /16-14 X 1-1/ n/a /16-14 X 1-1/ n/a /16-14 X 1-3/ n/a /16-14 X n/a /16-14 X 2-1/ n/a /16-14 X 2-1/ n/a /16-14 X 2-3/ n/a /16-14 X n/a *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 9 ~
4 P: F: HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /16-14 X 3-1/ n/a /16-14 X 3-1/ n/a /16-14 X n/a /16-14 X 4-1/ n/a /16-14 X n/a /16-14 X 5-1/ n/a /16-14 X n/a /16-14 X 6-1/ n/a n/a /16-14 X n/a n/a /16-14 X 7-1/2 n/a n/a n/a /16-14 X 8 n/a n/a n/a /16-14 X n/a n/a /16-14 X n/a n/a /2-13 X 3/ n/a /2-13 X /2-13 X 1-1/ /2-13 X 1-1/ /2-13 X 1-3/ /2-13 X /2-13 X 2-1/ /2-13 X 2-1/ /2-13 X 2-3/ /2-13 X /2-13 X 3-1/ /2-13 X 3-1/ /2-13 X 3-3/ /2-13 X /2-13 X 4-1/ /2-13 X /2-13 X 5-1/ /2-13 X /2-13 X 6-1/ /2-13 X /2-13 X 7-1/ /2-13 X /2-13 X 8-1/ A *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 10 ~
5 HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /2-13 X n/a /2-13 X 9-1/ A n/a /2-13 X n/a /2-13 X n/a n/a /2-13 X n/a /16-12 X n/a /16-12 X 1-1/ n/a /16-12 X 1-1/ n/a /16-12 X 1-3/ n/a /16-12 X n/a /16-12 X 2-1/ n/a /16-12 X 2-1/ n/a /16-12 X n/a /16-12 X 3-1/ n/a /16-12 X n/a /16-12 X 4-1/ n/a /16-12 X n/a /16-12 X 5-1/ n/a /16-12 X n/a /16-12 X 6-1/2 n/a n/a n/a /16-12 X 7 n/a n/a n/a /16-12 X 7-1/2 n/a n/a n/a /16-12 X 8 n/a n/a n/a /8-11 X /8-11 X 1-1/ /8-11 X 1-1/ /8-11 X 1-3/ /8-11 X /8-11 X 2-1/ /8-11 X 2-1/ /8-11 X 2-3/ /8-11 X /8-11 X 3-1/ /8-11 X 3-1/ /8-11 X 3-3/ *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 11 ~
6 P: F: HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /8-11 X /8-11 X 4-1/ /8-11 X /8-11 X 5-1/ /8-11 X /8-11 X 6-1/ /8-11 X /8-11 X 7-1/ /8-11 X /8-11 X 8-1/ n/a n/a /8-11 X /8-11 X 9-1/ n/a n/a /8-11 X n/a /8-11 X n/a n/a /8-11 X n/a /4-10 X /4-10 X 1-1/ /4-10 X 1-1/ /4-10 X 1-3/ /4-10 X /4-10 X 2-1/ /4-10 X 2-1/ /4-10 X 2-3/ /4-10 X /4-10 X 3-1/ /4-10 X 3-1/ /4-10 X /4-10 X 4-1/ /4-10 X /4-10 X 5-1/ /4-10 X /4-10 X 6-1/ /4-10 X /4-10 X 7-1/ B /4-10 X D /4-10 X H *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 12 ~
7 HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized /4-10 X L /4-10 X n/a n/a /4-10 X n/a n/a /8-9 X 1-1/ /8-9 X /8-9 X 2-1/ /8-9 X 2-1/ /8-9 X 2-3/ /8-9 X /8-9 X 3-1/ /8-9 X 3-1/ /8-9 X /8-9 X 4-1/ /8-9 X /8-9 X 5-1/ /8-9 X /8-9 X 6-1/ /8-9 X /8-9 X 7-1/ n/a /8-9 X n/a /8-9 X 8-1/ n/a n/a /8-9 X n/a n/a /8-9 X 9-1/2 n/a n/a n/a /8-9 X n/a n/a /8-9 X 11 n/a n/a n/a /8-9 X 12 n/a n/a n/a X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 13 ~
8 P: F: HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Stainless Steel Galvanized X 6-1/ X X 7-1/ B X D X 8-1/ F X H X 9-1/ J X L n/a 1-8 X n/a n/a 5 n/a 1-8 X n/a n/a 5 n/a 1-8 X n/a n/a 5 n/a 1-8 X n/a n/a 5 n/a 1-8 X n/a n/a Box Qty. Size Grade 5 Grade /8-7 X 2-1/ /8-7 X /8-7 X 3-1/ /8-7 X /8-7 X 4-1/ /8-7 X Grade /8-7 X 5-1/ /8-7 X /8-7 X 6-1/ /8-7 X /8-7 X 7-1/ /8-7 X /8-7 X 8-1/ Grade /8-7 X /8-7 X 9-1/ /8-7 X /8-7 X D /8-7 X H /8-7 X L /8-7 X Q /8-7 X U *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 14 ~
9 HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /4-7 X /4-7 X 3-1/ A /4-7 X 3-1/ /4-7 X /4-7 X 4-1/ /4-7 X /4-7 X 5-1/ /4-7 X /4-7 X 6-1/ /4-7 X /4-7 X 7-1/ B /4-7 X /4-7 X 8-1/ B /4-7 X /4-7 X 9-1/ B /4-7 X /4-7 X D /4-7 X H /4-7 X L /4-7 X Q /4-7 X U /8-6 X D /8-6 X 3-1/ F /8-6 X H /8-6 X 4-1/ J /8-6 X L /8-6 X 5-1/ N /8-6 X Q /8-6 X 6-1/ S /8-6 X U /8-6 X A /8-6 X I /8-6 X R /8-6 X X *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 15 ~
10 P: F: HEX HEAD CAP SCREWS (continued) COARSE THREAD (USS) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /2-6 X /2-6 X 3-1/ A /2-6 X 3-1/ /2-6 X 3-3/ A /2-6 X /2-6 X 4-1/ /2-6 X /2-6 X 5-1/ /2-6 X /2-6 X 6-1/ B /2-6 X /2-6 X 7-1/ B /2-6 X /2-6 X D /2-6 X H /2-6 X Q /2-6 X E HEX HEAD CAP SCREWS FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /4-28 X 1/ /4-28 X 3/ /4-28 X 7/ A 44101A 100 1/4-28 X /4-28 X 1-1/ /4-28 X 1-1/ /4-28 X 1-3/ /4-28 X /4-28 X 2-1/ /4-28 X 2-1/ /4-28 X 2-3/ *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 16 ~
11 HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /4-28 X /4-28 X 3-1/ /4-28 X /4-28 X 4-1/ /4-28 X /4-28 X 5-1/ /4-28 X /16-24 X 1/ /16-24 X 3/ /16-24 X /16-24 X 1-1/ /16-24 X 1-1/ /16-24 X 1-3/ /16-24 X /16-24 X 2-1/ /16-24 X 2-1/ /16-24 X 2-3/ /16-24 X /16-24 X 3-1/ /16-24 X 3-1/ /16-24 X 3-3/ /16-24 X /16-24 X 4-1/ /16-24 X /16-24 X 5-1/ /16-24 X /8-24 X 1/ /8-24 X 3/ /8-24 X 7/ A 44161A 100 3/8-24 X /8-24 X 1-1/ /8-24 X 1-1/ /8-24 X 1-3/ /8-24 X *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 17 ~
12 P: F: HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /8-24 X 2-1/ /8-24 X 2-1/ /8-24 X 2-3/ /8-24 X /8-24 X 3-1/ /8-24 X /8-24 X 4-1/ /8-24 X /8-24 X 5-1/ /8-24 X /16-20 X 3/ /16-20 X /16-20 X 1-1/ /16-20 X 1-1/ /16-20 X 1-3/ /16-20 X /16-20 X 2-1/ /16-20 X 2-1/ /16-20 X 2-3/ /16-20 X /16-20 X 3-1/ /16-20 X /16-20 X 4-1/ /16-20 X /16-20 X 5-1/ /16-20 X /2-20 X 3/ /2-20 X /2-20 X 1-1/ /2-20 X 1-1/ /2-20 X 1-3/ /2-20 X /2-20 X 2-1/ /2-20 X 2-1/ /2-20 X 2-3/ *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 18 ~
13 HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /2-20 X /2-20 X 3-1/ /2-20 X /2-20 X 4-1/ /2-20 X /2-20 X 5-1/ /2-20 X /2-20 X 6-1/ /2-20 X /2-20 X /16-18 X /16-18 X 1-1/ /16-18 X 1-1/ /16-18 X 1-3/ /16-18 X /16-18 X 2-1/ /16-18 X 2-1/ /16-18 X /16-18 X 3-1/ /16-18 X /16-18 X 4-1/ /16-18 X /16-18 X 5-1/ /16-18 X /8-18 X /8-18 X 1-1/ /8-18 X 1-1/ /8-18 X 1-3/ /8-18 X /8-18 X 2-1/ /8-18 X 2-1/ /8-18 X 2-3/ /8-18 X /8-18 X 3-1/ /8-18 X *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 19 ~
14 P: F: HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade 8 1 5/8-18 X 4-1/ /8-18 X /8-18 X 5-1/ /8-18 X /8-18 X 6-1/ /8-18 X /8-18 X /8-18 X 8-1/ B /8-18 X /8-18 X /8-18 X D /4-16 X /4-16 X 1-1/ /4-16 X 1-1/ /4-16 X 1-3/ /4-16 X /4-16 X 2-1/ /4-16 X 2-1/ /4-16 X 2-3/ /4-16 X /4-16 X 3-1/ /4-16 X /4-16 X 4-1/ /4-16 X /4-16 X 5-1/ /4-16 X /4-16 X 6-1/ /4-16 X /4-16 X 7-1/ B /4-16 X /4-16 X H /4-16 X L /8-14 X /8-14 X 2-1/ /8-14 X 2-1/ *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 20 ~
15 HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade 8 1 7/8-14 X /8-14 X 3-1/ B /8-14 X D /8-14 X 4-1/ F /8-14 X H /8-14 X 5-1/ J /8-14 X L /8-14 X 6-1/ M /8-14 X N /8-14 X 7-1/ O /8-14 X Q /8-14 X 8-1/ R /8-14 X S /8-14 X T /8-14 X U X W X 2-1/ X X 3-1/ A X B X 4-1/ C X D X 5-1/ E X F X 6-1/ G X H X 7-1/ I X J X 8-1/ K X L X 9-1/ M X N X O /8-12 X S /8-12 X 4-1/ T *Suffix P = Plain Finish *Suffix Y = Yellow Finish P.O.A. = Price on Availability ~ 21 ~
16 P: F: HEX HEAD CAP SCREWS (continued) FINE THREAD (SAE) Grade 5 Grade 8 Box Qty. Size Grade 5 Grade /4-12 X U /4-12 X V /4-12 X W /4-12 X X TAP BOLTS COARSE THREAD (USS) Fully Threaded Zinc Plated Box Bulk Size Grade 5 Zinc Grade 8 Plain /4-20 X 1-1/ /4-20 X 1-1/ /4-20 X /4-20 X 2-1/ /4-20 X /4-20 X 3-1/ /4-20 X /4-20 X 4-1/ /4-20 X /4-20 X 5-1/ /16-18 X 1-1/ /16-18 X /16-18 X 2-1/ A /16-18 X 2-1/ /16-18 X /16-18 X 3-1/ /16-18 X /16-18 X 4-1/ /16-18 X /8-16 X 1-1/ /8-16 X /8-16 X 2-1/ A /8-16 X 2-1/ /8-16 X /8-16 X 3-1/ /8-16 X Grade 5 Grade 8 ~ 22 ~
17 TAP BOLTS (continued) COARSE THREAD (USS) Fully Threaded Zinc Plated Box Bulk Size Grade 5 Zinc Grade 8 Plain /8-16 X 4-1/ /8-16 X /8-16 X 5-1/ /8-16 X /2-13 X /2-13 X 2-1/ /2-13 X /2-13 X 3-1/ /2-13 X Grade /2-13 X 4-1/ /2-13 X /2-13 X /8-11 X /8-11 X /8-11 X 4-1/ /8-11 X /8-11 X /4-10 X /4-10 X 3-1/ /4-10 X /4-10 X 4-1/ /4-10 X /4-10 X Grade 8 ~ 23 ~
18 SERRATED FLANGE BOLTS COARSE THREAD (USS) Zinc Plated Case Hardened Box Bulk Size Grade 5 P: F: /4-20 X 1/ /4-20 X 3/ /4-20 X /4-20 X 1-1/ /4-20 X 1-3/ /4-20 X 2-1/ /16-18 X 1/ /16-18 X 3/ /16-18 X /16-18 X 1-1/ /16-18 X 1-1/ /16-18 X /16-18 X 2-1/ /16-18 X C /8-16 X 1/ /8-16 X 3/ /8-16 X /8-16 X 1-1/ /8-16 X 1-1/ /8-16 X 1-3/ /8-16 X /8-16 X 2-1/ /2-13 X /2-13 X 1-1/ A /2-13 X 1-1/ ~ 24 ~
19 FLANGE BOLTS - GRADE 8 COARSE THREAD (USS) and FINE THREAD (SAE) Plain Finish Non Serrated Box Bulk Size Coarse Thread Fine Thread /8 X 1-1/ B /8 X D /8 X 2-1/ F /8 X H /8 X L /16 X 1-1/ D /16 X F /16 X 2-1/ H /16 X J /2 X 1-1/ /2 X /2 X 2-1/ /2 X /8 X 1-1/ /8 X /8 X 2-1/ /8 X /8 X /8 X /4 X /4 X 2-1/ /4 X /4 X 3-1/ /4 X /4 X 4-1/ Fine Thread Coarse Thread ~ 25 ~
20 CARRIAGE BOLTS Round Head Square Neck Nuts sold separately P: F: Box Bulk Size Grade 2 Zinc Grade 5 Zinc Grade 8 Plain Stainless Steel Galvanized /4-20 X 1/ B /4-20 X 3/ D /4-20 X F /4-20 X 1-1/ G /4-20 X 1-1/ H /4-20 X 1-3/ I /4-20 X J /4-20 X 2-1/ K /4-20 X 2-1/ L /4-20 X 2-3/ M /4-20 X N /4-20 X 3-1/ Q /4-20 X S /4-20 X 4-1/ B 41539U /4-20 X V /4-20 X 5-1/ B 41539W /4-20 X D 41539X /16-18 X 3/ D /16-18 X F /16-18 X 1-1/ G /16-18 X 1-1/ H /16-18 X 1-3/ I /16-18 X J /16-18 X 2-1/ K /16-18 X 2-1/ L /16-18 X 2-3/ M /16-18 X N /16-18 X 3-1/ Q /16-18 X 3-1/ R /16-18 X T /16-18 X 4-1/ V /16-18 X B 41540X /16-18 X F 41541D /16-18 X J 41541H /16-18 X N 41541L /8-16 X 3/ /8-16 X /8-16 X 1-1/ /8-16 X 1-1/ /8-16 X 1-3/ /8-16 X /8-16 X 2-1/ ~ 26 ~
21 CARRIAGE BOLTS (continued) Round Head Square Neck Nuts sold separately Box Bulk Size Grade 2 Zinc Grade 5 Zinc Grade 8 Plain Stainless Steel Galvanized /8-16 X 2-1/ /8-16 x 2-3/ A /8-16 X B /8-16 X 3-1/ D /8-16 X F /8-16 X 4-1/ H /8-16 X J /8-16 X 5-1/ L /8-16 X N /8-16 X 6-1/ B 41554Q /8-16 X D 41554S /8-16 X 7-1/ A 41472F 41554U /8-16 X H 41554W /8-16 X L 41555C /8-16 X Q 41555G /16-14 X A C 86994B 98101B /16-14 X 1-1/ D 86994C 98101C /16-14 X 1-1/ E 86994D 98101D /16-14 X 1-3/ F 86994E 98101E /16-14 X G 86994F 98101F /16-14 X 2-1/ I 86994H 98101H /16-14 X K 86994J 98101J /16-14 X 3-1/ M 86994L 98101L /16-14 X Q 86994N 98101N /16-14 X 4-1/ S 86994R 98101R /16-14 X U 86994T 98101T /16-14 X 5-1/ A W 86994V 98101V /16-14 X B 86994X 98101X /2-13 X V C /2-13 X 1-1/ D /2-13 X 1-1/ E /2-13 X 1-3/ /2-13 X /2-13 X 2-1/ /2-13 X 2-1/ /2-13 X /2-13 X 3-1/ /2-13 X /2-13 X 4-1/ /2-13 X /2-13 X 5-1/ /2-13 X ~ 27 ~
22 CARRIAGE BOLTS (continued) Round Head Square Neck Nuts sold separately P: F: Box Bulk Size Grade 2 Zinc Grade 5 Zinc Grade 8 Plain Stainless Steel Galvanized /2-13 X 6-1/ B 41572B /2-13 X D 41572D /2-13 X 7-1/ F 41572F /2-13 X H 41572H /2-13 X 8-1/ A 41508J 41572J /2-13 X L 41572L /2-13 X R 41572R /2-13 X T 41572V /2-13 X V 41573B /8-11 X V /8-11 X 2-1/ /8-11 X /8-11 X 3-1/ /8-11 X /8-11 X 4-1/ /8-11 X /8-11 X /8-11 X D /8-11 X H /8-11 X L /4-10 X 2 n/a n/a n/a n/a /4-10 X 2-1/2 n/a 41525A n/a n/a /4-10 X 2-3/4 n/a n/a n/a n/a /4-10 X 3 n/a n/a n/a /4-10 X 3-1/2 n/a n/a n/a /4-10 X 4 n/a n/a n/a /4-10 X 4-1/2 n/a n/a n/a /4-10 X H n/a n/a /4-10 X 5-1/2 n/a n/a n/a n/a /4-10 X L n/a n/a ~ 28 ~
23 CARRIAGE BOLTS Ribbed Neck Box Qty. Bulk Size Grade 5 Zinc /4-20 X 1-1/ /4-20 X 1-1/ /16-18 X 1-1/ /16-18 X 1-1/ /8-16 X 1-1/ * /8-16 X 1-1/ * * Rib is.250 length BOTTOM RAIL BOLT KITS Kit includes 8 of the following 3/8-16 Ribbed Neck Carriage Bolt* 3/8 Nylon Washer 3/8-16 Serrated Flange Nut Pkg. Qty. Bulk Bolt Size Part # 8 Each 100 Each 3/8-16 X 1-1/ Each 100 Each 3/8-16 X 1-1/ BUY RAIL BOLT KIT HARDWARE INDIVIDUALLY Pkg. Qty. Bulk Description Part # /8-16 Serrated Flange Nut /8 Nylon Washer /8-16 X 1-1/4 Ribbed Neck Carriage /8-16 X 1-1/2 Ribbed Neck Carriage ~ 29 ~
24 PLOW BOLTS Square neck COARSE THREAD (USS) #3 Heads 3/8-1/2 Flat Head 5/8-1 Domed Head P: F: Box Bulk Size Grade 5 Plain Grade 5 Zinc Grade 8 Plain /8-16 X P /8-16 X 1-1/ P /8-16 X 1-1/ P /8-16 X 1-3/ P /8-16 X P /8-16 X 2-1/ P /8-16 X 2-1/ P /8-16 X P /16-14 X P /16-14 X 1-1/ P /16-14 X 1-1/ P /16-14 X 1-3/ P /16-14 X P /16-14 X 2-1/ P /16-14 X 2-1/ P /16-14 X 2-3/ P /16-14 X P /16-14 X 3-1/ P /16-14 X P /2-13 X 1-1/ P /2-13 X P /2-13 X 2-1/ P /2-13 X 2-1/ P /2-13 X 2-3/ P /2-13 X P /2-13 X 3-1/ P /2-13 X P /8-11 X 1-1/ P /8-11 X P /8-11 X 2-1/ P /8-11 X 2-1/ P /8-11 X 2-3/ P /8-11 X P /8-11 X 3-1/ P /8-11 X P /4-10 X P /4-10 X 2-1/ P /4-10 X P /4-10 X 3-1/ P /4-10 X P ~ 30 ~
25 DOMED HEAD PLOW BOLTS Square Neck COARSE THREAD (USS) Box Bulk Size Grade 8 Plain /8-9 X /8-9 X 2-1/ /8-9 X /8-9 X 3-1/ /8-9 X X 2-1/ X X 3-1/ X ELEVATOR BOLTS Zinc Plated COARSE THREAD (USS) Box Bulk Size Zinc Plated /4-20 X /4-20 X 1-1/ /4-20 X 1-1/ /4-20 X /4-20 X 2-1/ /4-20 X /16-18 X /16-18 X 1-1/ /16-18 X 1-1/ /16-18 X /16-18 X 2-1/ /16-18 X /8-16 X 1-1/ /8-16 X Also available in Stainless Steel and Fanged Head. ~ 31 ~
26 MACHINE SCREW HEX NUTS COARSE THREAD (USS) Box Bulk Size Zinc Stainless Steel P: F: ,000 # ,000 # ,000 # ,000 # ,000 # # #10(3/16 ) # Stainless Steel Zinc MACHINE SCREW HEX NUTS FINE THREAD (SAE) Box Bulk Size Zinc Stainless Steel # Stainless Steel Zinc STANDARD FINISHED HEX NUTS COARSE THREAD (USS) Box Bulk Size Grade 5 Zinc Grade 8 Z/Yellow Stainless Brass Galvanized / / ,000 3/ / / / / / / / / / / ~ 32 ~
27 HEX NUTS FINE THREAD (SAE) Box Bulk Size Grade 5 Grade 8 Stainless Steel / / / / / / / / / / n/a / n/a / n/a / n/a SERRATED FLANGE LOCKING NUTS COARSE THREAD (USS) FINE THREAD (SAE) Grade 8 Grade 5 Stainless Steel Box Bulk Size Zinc Stainless Steel # n/a #10-24 n/a / / / / n/a / / n/a / n/a Zinc Stainless Steel #10-32 n/a / / / ~ 33 ~
28 JAM (thin) HEX NUTS COARSE THREAD (USS) FINE THREAD (SAE) Box Bulk Size Zinc Stainless Steel P: F: / / / / / / / / / / n/a / n/a / n/a / n/a / n/a / n/a / n/a / n/a / n/a n/a n/a Zinc Stainless Steel HEAVY HEX NUTS COARSE THREAD (USS) Box Bulk Size Standard Zinc Plain Galvanized Stainless Steel / P / P / / n/a / / / / ~ 34 ~
29 KEPS NUTS COARSE THREAD (USS) Box Bulk Size Zinc ,000 # ,000 # ,000 #10(3/16 ) ,000 # / / / / ROD COUPLING NUTS COARSE THREAD (USS) Box Bulk Size Zinc Galvanized Stainless /4-20 x 7/16 x 1-3/ /16-18 x 1/2 x 1-3/ /8-16 x 9/16 x 1-3/ /16 x 5/8 x 1-3/ n/a /2-13 x 11/16 x 1-3/ /8-11 x 13/16 x 2-1/ /4-10 x 1 x 2-1/ /8-9 x 1-1/4 x 2-1/ x 1-1/4 x 2-1/ Zinc ECONOMY COUPLING NUTS COARSE THREAD (USS) FINE THREAD (SAE) Box Bulk Size Zinc Plated /4-20 X 3/8 X 7/ /16-18 X 7/16 X 7/ /6-16 X 1/2 X 1-1/ /16-14 X 9/16 X 1-1/ /2-13 X 5/8 X 1-1/ /4-28 X 3/8 X 7/ /16-24 X 7/16 X 7/ /8-24 X 1/2 X 7/ /16-20 X 9/16 X 1-1/ /2-20 X 5/8 X 1-1/ /8-18 X 13/16 X 2-1/ /4-16 X 1 X 2-1/ /8-14 X 1-1/4 X 2-1/ X 1-3/8 X 2-3/ ~ 35 ~
30 SLOTTED CASTLE NUTS COARSE THREAD (USS) FINE THREAD (SAE) Box Bulk Size Zinc P: F: / / / / / / / / / / / / / / / / / / / / / / / / / / ~ 36 ~
31 ACORN NUTS COARSE THREAD (USS) Box Bulk Size Zinc Stainless Steel Nickel # n/a # n/a # n/a / n/a / n/a / n/a / n/a / n/a / n/a / n/a #10-32 n/a /4-28 n/a /16-24 n/a /8-24 n/a /16-20 n/a /2-20 n/a /8-18 n/a n/a HEX LOCK NUTS Nylon Insert COARSE THREAD (USS) Box Bulk Size Standard Zinc Grade 8 Stainless Steel # # #10(3/16 ) # / / / / / / / / / / / / / ~ 37 ~ Stainless Steel Grade 8 Zinc Standard Zinc Stainless Steel
32 HEX LOCK NUTS Nylon Insert FINE THREAD (SAE) Box Bulk Size Standard Zinc Grade 8 Stainless Steel P: F: #10(3/16 ) / / / / / / n/a / / n/a / n/a n/a / n/a / n/a / n/a / n/a JAM (thin) NYLOX HEX NUTS COARSE THREAD (USS) Box Bulk Size Zinc Stainless Steel / Zinc / / / / / n/a / / / n/a n/a / n/a JAM (thin) NYLOX HEX NUTS FINE THREAD (SAE) Box Bulk Size Zinc Stainless Steel Grade 8 Stainless Steel Standard Zinc Stainless Steel / / / / / / / / / / ~ 38 ~ Zinc Stainless Steel
33 TOP LOCK NUTS - Grade C - ZINC PLATED Box Bulk Size Coarse Thread Fine Thread / / / / / / / / / / / / / LOCKING FLANGE NUTS - Grade G Phosphate and Oil Finish Box Bulk Size Coarse Thread Fine Thread / / / / / / / WING NUTS COARSE THREAD (USS) Box Bulk Size Standard Zinc Stainless Steel # # #10(3/16 ) / / / / / / / ~ 39 ~ Stainless Steel Standard Zinc
34 P: F: WASHERS SAE Small Box Bulk Size Standard Zinc Grade 8 Stainless Steel O.D. I.D. Approx. Thickness ,000 # B /16 1/8 1/ ,000 # D /8 5/32 3/ ,000 # E /16 3/16 3/ ,000 # F /2 7/32 3/ ,000 # G /16 1/4 1/ ,100 1/ /8 9/32 1/ / /16 11/32 1/ / /16 13/32 1/ / /64 15/32 1/ / /16 17/32 3/ / /16 19/32 3/ / /16 21/32 3/ / /2 13/16 9/ / /4 15/16 9/ /16 9/ / n/a 2-1/4 1-1/4 7/ / n/a 2-1/2 1-3/8 9/ / n/a 3 1-5/8 9/64 WASHERS USS Large Box Bulk Size Standard Zinc Grade 8 Galvanized O.D. I.D. Approx. Thickness / /4 5/16 1/ / /8 3/8 1/ / /16 1/ / /4 1/2 1/ / /8 9/16 3/ / /2 5/8 3/ / /4 11/16 3/ / /16 9/ / /4 15/16 9/ /2 1-1/16 9/ / /4 1-1/4 9/ / /8 9/ / /4 1-1/2 9/ / /2 1-5/8 9/64 ~ 40 ~
35 LOCK WASHERS Medium Split Box Bulk Size Standard Zinc Grade 8 Stainless Steel Galvanized # B # C # D # E # F # G / / / / / / / / / / / / / FENDER WASHERS Box Bulk Size Standard Zinc Stainless Steel /16 X 3/ /16 X /16 X 1-1/ /4 X /4 X 1-1/ /4 X 1-1/ /4 X /16 X 1-1/ /16 X 1-1/ /8 X 1-1/ /8 X 1-1/ /8 X /2 X 1-1/ /2 X /8 X ~ 41 ~ Stainless Steel Standard Zinc
36 EXTRA-THICK FENDER WASHERS - ZINC PLATED Box Bulk Size Thickness Part # /4 X /4 X 1-1/ /16 X 1-1/ /16 X 1-1/ /16 X 1-3/ /8 X 1-1/ /8 X 1-3/ /2 X P: F: HI-COLLAR LOCKWASHERS Fits under the head of a Socket Head Cap Screw Box Bulk Size Plain Finish Stainless Steel # n/a # n/a # n/a / / / / / / / / n/a n/a Plain Finish U-BOLT WASHERS - Grade 8 - PLAIN FINISH Box Bulk Size Thickness O.D. I.D. Part # /8.13/ / / /16.13/ / / /2.177/ / / /16.177/ / / /8.177/ / / /4.177/ / / /8.177/ / / / / / /8.177/ / / /4.24/ / / ~ 42 ~
37 THREADED RODS - COARSE THREAD 3, 6 and 12 lengths available in every size Zinc Plated Plain Finish Stainless Steel Bundle Standard (Hardened) (Hot Dipped) (304) Qty. Diameter Length Zinc Plated B7 - Plain Finish Galvanized Stainless Steel 50 # Feet n/a 93199B # Feet n/a 93199D # Feet n/a 93199F # Feet n/a 93199H /4 6 Feet /16 6 Feet /8 6 Feet /16 6 Feet /2 6 Feet /16 6 Feet /8 6 Feet /4 6 Feet /8 6 Feet Feet /8-7 6 Feet /4-7 6 Feet / Feet n/a n/a 1 1-1/2-6 6 Feet / Feet n/a / Feet n/a / Feet n/a / Feet n/a / Feet n/a / Feet n/a n/a 8 5/ Feet n/a / Feet n/a / Feet n/a n/a Feet n/a n/a Also available in: A449 F1554 Grade 36 F1554 Grade 55 F1554 Grade Stainless Steel ~ 43 ~
EMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Version. BBI products and services offered exclusively through distribution
2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Nordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
ANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
AM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
Optolite Indicators. General Purpose INDICATOR LIGHTS. Sub-Miniature. Miniature, Neon
Sub- Lockwasher, stainless steel or steel, nickel plate. Brass T-1 sub-midget flange base. See Selection Guide. Assembly mounts from front of panel. All mounting hardware Approximately.12 oz. less lamp.,
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
In-Ground Basketball System Owners Manual
In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
1-2 Pair Drop Wire Clamp
ADH -2 Pair Drop Wire Clamp Clamps, Drop Neoprene Shim Dimpled Shim Serrated Shim Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. Aluminum
Metric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
www.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
ILLUSTRATED PARTS LIST
CW11 / TW11 / TW11R WITH 340cc HONDA ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side.
CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions
Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be
SPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
1999-2010 GENERAL MOTORS 3/4 &1 TON RT3 UNDERCARRIAGE MOUNTING INSTRUCTIONS (PART NO. LTA04767B)
1999-010 GENERAL MOTORS 3/4 &1 TON MOUNTING INSTRUCTIONS (PART NO. LTA04767B) MSC04380-8 WARNING Many newer trucks are now equipped with air bags. DO NOT under any circumstances disable, remove or relocate
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
GRATES AND DRAINS HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
15-1 CLEANOUT COVERS 47471082 4-11/16 Josam, 3 screw 47471084 6-5/16 Josam, 3 screw 47761070 5-7/16 Smith, 3 screw w/ closure plug 47941108 6-1/4 Wade, 3 screw 47991400 4-5/8 Zurn, 3 screw 47991402 6-1/8
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
TITAN 13 x 2 ½ BRAKES
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 510-42000-00 KIT P/N 510-42010-00 KIT P/N 510-42015-00
FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 0-000-00 KIT P/N 0-00-00 KIT P/N 0-0-00 TOOLS REQUIRED () /" WRENCHES OR SOCKETS TAPE MEASURE TORQUE WRENCH
STIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
Product Notice. Safety Notice: Sales Hold
Product Notice Ariens Company 655 W. Ryan St. Brillion, WI 54110 www.ariens.com Product Family: Ariens and Gravely 36 Power Brushes Subject: Sales Hold Inspect and Repair Dealer Action: SALES HOLD Do not
Cat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
Acero Inoxidable 304 Perno Cabeza Hexagonal Rosca Entera Stainless Steel 304 Hex Cap Screw Full Thread
Perno Cabeza Hexagonal Rosca Entera Hex Cap Screw Full Thread Dimensiones: ANSI B 18.2.1 Rosca: UNC ANSI B 1.1 y BSW BS 84 Dimensions: ANSI B 18.2.1 Thread: UNC ANSI B 1.1 and BSW BS 84 Prices in US$ -
Black Wolf POCKET BILLIARD TABLE INSTALLATION MANUAL. SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104
Black Wolf TM POCKET BILLIARD TABLE INSTALLATION MANUAL www.brunswickbilliards.com SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104 51-905710-000 SEPTEMBER 2010 NOTE: Please use the instructions in this
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
Our sales are dedicated to large industries ( 80%) and trading ( 20%).
1 Located in the heart of Lorraine, about 1 km from the A31 highway, the company is in the center of Europe. Any french destination can generally be delivered within 24 hours or within 48 hours maximum.
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
HENDERSON WHEEL & WAREHOUSE SUPPLY. 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013
HENDERSON WHEEL & WAREHOUSE SUPPLY 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013 Hub Pilot 8-Hole and 10- Hole Wheels... Page 1 Hub Pilot Duplex Wheels... Page 2 Stud Pilot 6-Hole and 10-Hole
INSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
Mini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA
Mini-ZT Parts Manual Models 0-0 0-00 - 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an
Dock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
HARDWARE SHOP COMPLETE INVENTORY TOTAL VALUE: 514.197,88
1 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x10 700 4,69 2 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x16 100 1,3 3 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x20 400 3,88 4 Screw TE 8.8 T.F. galvanized
NBA Arena Portable System
REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Wood Board 6 x 6 (scrap) N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. NBA Arena Portable System Sawhorse or Support Table
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
To Use any command in this guide: 1. Select the option from the Design Menu in the Mechanical Eng workspace.
120 1 ME Mechanical Engineers use a variety of mechanical drawings and computer tools for analysis and design. During the design process, drawings are used throughout to develop and document the design
Section D OVERHEADS October, 1997 1D
Section D OVERHEADS October, 1997 1D Index No. Part No. Description 1. 57-861635-000 Fuse, 2.0A, 250-Volt Slow Blow (110/120 VAC) 57-861636-000 Fuse, 1.0A, 250-Volt Quick Blow (220/240 VAC) 2. 11-185270-000
CR25 Cable Roller Guide
INSTRUCTION MANUAL CR25 Cable Roller Guide Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52022071 2005 Greenlee Textron Inc.
Fittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661
PARTS MANUAL FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661 FOR YOUR CONVENIENCE YOU MAY ALSO PLACE ORDERS
TRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
ONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL BASKETBALL GAMES ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 Canby,
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product
Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678
Small Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
9,000lb capacity 4 Post Lift Installation Manual
9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled
Pulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE
Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has
*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
SECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
Fixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
PRODUCT: 3/8 RIVET NUT INSTALL INSTRUCTIONS READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 8:00 AM 5:00 PM PST
PRODUCT: 3/8 RIVET NUT INSTALL INSTRUCTIONS READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 8:00 AM 5:00 PM PST The MetalCloak experience includes the ease of installation
Installation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
VersaRack Installation Instructions. masterack. Tools Required:
masterack Versaack Installation Instructions ll of us at asterack wish to thank you for your purchase of the Versaack. We are proud of this product and hope that you fi nd it a functional as well as a
SPARE PARTS LIST AND ASSEMBLING GUIDELINE FOR EM 50 FAN
SPRE PRTS LIST ND SSEMLING GUIDELINE FOR EM 50 FN Munters euroemme S.p.. Strada Piani, I-807 Chiusavecchia (Imperia) - Italy Tel. +39 083 5 Fax +39 083 5333 http://www.munters.com e-mail:info@munterseuroemme.it
2.4M SERIES 1241 ANTENNA
4096-859 Revision A August 7, 2012 2.4M SERIES 1241 ANTENNA GENERAL DYNAMICS SATCOM Technologies 1500 Prodelin Drive Newton NC 28658USA Phone 828-464-4141 www.gdsatcom.com Prodelin Corporation Page 1 8/17/2012
Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)
Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.
SECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG
PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-11.15C Effective: November 30, 2015 Cancels Price Sheet PH-4.15C of April 5, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION
VOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
The Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
TEST REPORT. Rendered to: HOMELAND VINYL PRODUCTS, INC. For:
TEST REPORT Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PRODUCT: Gorilla Column PVC Porch Post System with PVC Base / Cap Plates, PVC Bushings and 2-3/8 in Diameter and 3-1/2 in Diameter Galvanized
Designed for single or double sided signs installed on pipe post without drilling holes. Easy to align. 1 1/4 Height. 1 Depth
SIGN MOUNTING - Brackets, Fixtures & Fasteners Designed for single or double sided signs installed on pipe post without drilling holes. Easy to align. Clamp On Side Brackets Single or Double Faced Sign
OWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179
AM/FM ANTENNA KIT (TOUR-PAK MOUNT)
-J077 REV. 008-0-0 AM/FM ANTENNA KIT (TOUR-PAK MOUNT) GENERAL Kit Number 7-98A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
Installation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
R O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 4...1/2 x 1 1/2
Power Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
Installation Instructions: (Part # SB76880) XRC Armor Front Fender Kit
WARNING: Check with Local and State laws before installing this accessory! NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty Parts Included:
RPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS