R O A D M A S T E R, I N C.

Size: px
Start display at page:

Download "R O A D M A S T E R, I N C."

Transcription

1 R O A D M A S T E R, I N C. MOUNTING BRACKET KIT ITEM QTY NAME MATERIAL HOLE BACKING PLATE... A /4 x 1 1/2 x 2 SQ. HOLE BACKING PLATE... A /2 x 1 1/2 CARRIAGE BOLT /2 x 1 1/4 BOLT /2 LOCK WASHER /2 HEX NUT mm x 1.25 x 35 mm BOLT mm LOCK WASHER mm FENDER WASHER mm x 1 x 35 mm BOLT mm LOCK WASHER mm FENDER WASHER /2 x 1 1/2 BOLT /2 x 4 BOLT /2 FLAT WASHER SAFETY CABLES QUICK LINK SAFETY PIN DRIVER SIDE REAR BRACE... C PASSENGER SIDE REAR BRACE... C DRIVER SIDE ARM... C PASSENGER SIDE ARM... C DRIVER SIDE RECEIVER... C PASSENGER SIDE RECEIVER... C

2 This is one of our EZ2 series brackets, which allows the visible front portion of the bracket to be easily removed from the front of the vehicle (Fig.A and Fig.B). The bracket consists of a main receiver brace, two removable front braces, and a hardware pack. The main receiver brace mounts to the frame rails and the bumper core. The removable front braces install in the main receiver brace. Before starting the installation, lay out the kit components in order, as they will be used. This will give you a visual idea of how the components work, and will also confirm that everything is present and accounted for. Stock Turbo/S IMPORTANT: All brackets must be assembled with all the bolts left loose for final adjustment and positioning (before tightening) unless otherwise instructed. All bolts must be torqued for proper strength. If more than one bolt is used per fastening point, the diagram may only show one. Use flat washers over all slotted holes Use lock washers on all fasteners ROADMASTER Limited Warranty, including One-Year Conditional Warranty Text and Product Registration Card, in Carton. Failure to follow these instructions can result in property damage, WARNING personal injury or even death. Installation of most mounting brackets requires moderate mechanical aptitude and skills. We strongly recommend professional installation by an experienced installer. The installer must read the instructions and use all bolts and parts supplied. Failure to do so could result in loss of the towed vehicle. Use Loctite Red on all bolts used for mounting this bracket. Do not use this document for custom fabrication, as it may not show all parts or structural components. Custom fabrication or an attempt to copy this bracket design could result in loss of the towed vehicle. Every 3,000 miles, the owner must inspect the fasteners for proper torque, according to the bolt torque requirements chart on the last page of these instructions. The owner must also inspect all mounts and brackets for cracks or other signs of fatigue every 3,000 miles. Failure to do so could result in loss of the towed vehicle. The owner must check the vehicle manufacturer's instructions for the proper procedure(s) to prepare the vehicle for towing. Some vehicles must be equipped with a transmission lube pump, an axle disconnect, driveline disconnect or free-wheeling hubs before they can be towed. Failure to properly equip the vehicle will cause severe damage to the transmission. If running changes were made by the vehicle manufacturer after this bracket was designed, some bolts or other fasteners in the hardware pack may no longer be the correct size. It is the installer s responsibility to verify that the bracket is securely fastened to the vehicle and fitted with the correct hardware to account for these changes. Failure to securely fasten the bracket could result in loss of the towed vehicle. If the towed vehicle has been in an accident, it must be properly repaired before attaching the bracket. Do not install the bracket if any structural frame damage is found. Failure to repair the damage could result in the loss of the towed vehicle. Some motorhome chassis have such a tight turning radius that you can damage your motorhome, towed vehicle, tow bar or bracket while turning sharply. Before getting on the road, test your turning radius in an empty parking lot. Turning too sharply could result in non-warranty damage to towing system, motorhome and/or towed vehicle. Do not back up with the towed vehicle attached or non-warranty damage will occur to your towing system, motorhome and/or towed vehicle. The safety cables must connect the towing vehicle to the towed vehicle frame to frame, with the cables crossed, with enough slack for sharp turns. Refer to the cable instructions for proper routing. Failure to leave enough slack in the safety cables, or failure to connect the safety cables frame to frame, will result in the loss of the towed vehicle. This bracket is designed for use with ROADMASTER tow bars and ROADMASTER adaptors only. Using this bracket with other brands, without an approved ROADMASTER adaptor, may result in nonwarranty damage or injury. Upon final installation, the installer must inspect the bracket to ensure adequate clearance, particularly around hoses, air conditioner lines, radiators, etc., or non-warranty damage to the towed vehicle will result. This bracket is only warranteed for the original installation. Installing a used bracket on another vehicle is not recommended and will void the warranty.

3 This is one of our EZ lock bracket series which allows the visible front portion of the brackets to be easily removed from the front of the car by rotating the front braces. The bracket kit consists of two rear receiver braces, two rear frame braces, two front bumper braces, two tubular main braces and a hardware pack. The rear receiver braces mount to the frame below the headlights and behind the bumper. The rear frame braces bolt to the rear receiver braces and then to the sides and bottoms of the frame on both sides. The tubular main braces are inserted through the front fascia into the rear braces and rotated 90 degrees to lock in place. Before starting the installation, lay out the kit components as illustrated (Fig. A). This will give you a visual idea of how the components work and also confirm that everything is present and accounted for. Fig.A Fig.B Fig.C Fig.D 1. Important: please use all supplied bolts and parts and read all instructions carefully before beginning this installation. The majority of questions you may have can be answered within the text, and proper installation will ensure safe and secure travel. Now, begin the installation by locating and removing three plastic rivets securing the lower lip of the grill to the radiator cross frame. Note: the plastic rivets can be removed by using a small punch or screwdriver to push the plastic center pin out the back of the rivet. Then, remove the license plate holder. 2. Next, if fog lights are present, remove three screws holding the fog lights behind the bumper fascia.(fig.b) Note: the screws can be either Phillips or Torx 25 and the top two will require pulling the plastic down and forward to access the top screws with a small bit. These screws must be removed. The lights can then be saved for reinstallation at a later date. 3. Now the lower grill can be removed by pulling forward while simultaneously inserting a blade or screw driver between the grill and bumper fascia, pushing into the snap and twisting until it releases. There are 16 snaps in the edge of the grill (Fig.C). Note: it is difficult but possible to install the braces by just unsnapping the corners of the grille and pulling forward. Note: on turbo/s models (Fig.D) push the three grilles in to unsnap them. Fig.E Fig.F Fig.G 4. On each side, remove the wheel cover and wheel by removing five lugnuts (Fig.E). 5. On each side, remove seven T25 screws attaching the fender liner to the fascia (Fig.F). 6. Remove all of the lower splash shields. Now, on each side, pull down to remove the vertical side shield. Note: you may need to pop out the cinch clip to assist in this process (Fig.G).

4 Fig.H Fig.I Fig.J 7. On Turbo models: before the bracket can be installed, locate the intercooler in the passenger side fender wall. The inside edge of the air deflector will need to be removed, trimmed, and reinstalled to allow clearance for the passenger side main receiver brace. Use the yellow lines in Figure H as a guide for trimming. 8. Remove two 8mm bolts holding the bumper mounts in place. Also, remove the 8mm bolts holding the radiator support. Note: some models may have 6mm bolts. 9. Hold the receiver brace in place and bolt through with the supplied 8mm x 1.25 x 35mm bolts, lock washers and flat washers (Fig.I). 10. Repeat step 5 and 6 on the remaining side. 11. Install the bumper brace plates on the bumper using four ½ x 1½ carriage bolts, ¼" sq. hole backing plates, lock washers and nuts. Then, bolt through the receiver brace using ½ x 1¼ bolts and washers. Note: the 1½ x 2 backing plates should be installed over the top and the bottom lip of the bumper (Fig.J). Do not tighten. Fig.K Fig.L Fig.M 12. Starting with the passenger side, bolt the rear frame brace to the back of the rear receiver brace with a ½ x 1 ½ bolt, flat washers, lock washer and nut. Tighten and align the rear frame brace against the bottom of the frame. 13. Using the pre-drilled holes in the receiver brace as a template (Fig.K), drill through the frame with a ½ drill bit. Then, bolt into place using a ½ x 4 bolt, lock washer and nut (Fig.L). Note: be sure to use a backing plate on the back of the frame when drilling to avoid engine damage. 14. Repeat steps 12 and 13 on the driver's side (Fig.M). 15. Trim the splash shield you removed in step 6, using the yellow trim lines in Figure N as a guide for trimming. 16. Check the brace alignment then torque all mounting bolts to the specifications below. Fig.N All illustrations and specifications contained herein are based on the latest information available at the time of publication approval. ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.

5 Fig.O Fig.P Fig.Q 17. Reinstall grille and fascia by reversing steps 1 through 4. The standard grille will fit over the receiver braces without trimming (Fig.O). The turbo/s model grille will require trimming to fit (Fig.P). 18. In addition, access holes for the safety cable attachment will have to be cut in the lower front splash panel on each side(fig.q). 19. Insert the front tubular main braces in the rear receiver braces on each side and twist 90 degrees to lock in place. Install safety pins in safety tabs to lock into place (Fig.R). Mount the tow bar according to the manufacturer s instructions. 20. Attach the tow vehicle's safety cables to the front of the receiver with the included supplied cable connectors. Fig.R STANDARD BOLTS Thread Size Grade Torque 5/ ft./lb. 3/ ft./lb. 7/ ft./lb. 1/ ft./lb. 5/ ft./lb. BOLT TORQUE REQUIREMENTS Note: The torque values represented below are intended as general guidelines. Torque requirements for specific applications may vary. Roadmaster does not warrant this information to be accurate for all applications and disclaims all liability for any claims or damages which may result from its use. METRIC BOLTS Thread Size Grade Plated / Unplated 8mm ft./lb. 18 ft./lb. 8mm ft./lb. 18 ft./lb. 10mm ft./lb. 36 ft./lb. 10mm ft./lb. 35 ft./lb. METRIC BOLTS Thread Size Grade Plated / Unplated 12mm ft./lb. 65 ft./lb. 12mm ft./lb. 61 ft./lb. 12mm ft./lb. 60 ft./lb. 14mm ft./lb. 97 ft./lb. All illustrations and specifications contained herein are based on the latest information available at the time of publication approval. ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. MOUNTING BRACKET KIT 12 3 6 9 5 11 ITEM QTY NAME MATERIAL 1...4...1/2" x 1 1/2" BOLT... 350095-00 2...4...1/2" x 1 1/2" CARRIAGE BOLT... 350362-00 3...8...1/2" NUT... 350258-00

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. MOUNTING BRACKET KIT 14 8 7 4 13 5 6 ITEM QTY NAME MATERIAL 1...6...1/2" x 2 1/2" BOLT... 350099-00 2...2...1/2" x 1 1/2" BOLT... 350095-00 3...8...1/2" LOCK WASHER... 350309-00

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 1 MOUNTING BRACKET KIT ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 19 17 4 2 18 12 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME PART # 1...

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 11 10 20 12 4 18 19 1 2 13 16 ITEM QTY NAME MATERIAL 1...2... 1/2" x 3 1/2" BOLT... 350103-00 2...2... 1/2" x 2" BOLT... 350097-00 3...6... 1/2" x 1 1/2" BOLT... 350095-00 4...2...

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 4 MOUNTING BRACKET KIT 1 2 3 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME PART # 1...2... #10 x

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 11 7 6 1 2 10 13 8 ITEM QTY NAME PART # 1...2...1/2 x 5 1/2 BOLT...350108-00 2...4...1/2 x 1 3/4 BOLT...350096-00 3...6...1/2 LOCK WASHER...350309-00 4...6...1/2 HEX NUT...350258-00

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. MOUNTING BRACKET KIT ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 5 3 2 4 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 2... #10

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 6 28 1 2 "ā 1 2 " 4 8 ITEM QTY NAME PART # 1...4...1/2 x 1 1/4 BOLTS... 350094-00 2...4...1/2 LOCK WASHER... 350309-00 3...4...1/2 HEX NUT... 350258-00 4...2...SPACER PLATE...

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 8 7 1 6 15 28 1 2 "± 1 2 " MOUNTING BRACKET KIT 3 2 10 14 4 5 9 360-896-0407 fax 360-735-9300 www.roadmasterinc.com Item

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. MOUNTING BRACKET KIT ITEM QTY NAME MATERIAL 1... 6... 1/2" x 1 1/4" BOLT...350094-10 2... 8... 1/2" LOCK WASHER...350309-00 3... 8... 1/2" HEX NUT...350258-00 4... 2... 1/2"

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 8 MOUNTING BRACKET KIT 7 4 5 6 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM... QTY..NAME...PART # 1... 6...1/2

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 16 6 18 Cable Tab 13 15 8 10 2 Cable Tab 1 11 9 17 14 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 11 4 9 28 1 2 "ā 1 2 " 10 7 13 Special tools needed: plastic pop rivet gun ITEM QTY NAME PART # 1...4... 1/2 x 1 1/4 BOLT... 350094-00 2...8... 1/2 LOCK WASHER... 350309-00

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 4...1/2 x 1 1/2

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 13 8 Cable Tab 7 5 12 Cable Tab 11 14 9 2 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 8 4 7 6 9 ITEM QTY NAME MATERIAL 1...2...1/2 x 4 1/2 BOLT...350106-00 2...2...1/2 HEX NUT...350258-00 3...2...1/2 LOCK WASHER...350309-00 4...2...#10 x 3/4 SELF TAPPING SCREW...350247-35

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 15 ITEMS 18,19,20,21,& 22 REQUIRED FOR VEHICLES WITHOUT TOW HOO 19 18 MOUNTING BRACKET KIT 20 22 4 21 14 5 11 360-896-0407

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 22 9 8 7 10 17 26 20 15 Cable Tab 21 1 16 Cable Tab 6 5 25 ITEM QTY NAME PART # 1...2...#10 x 3/4 SELF DRILLING SCREW...350247-35 2...6...1/2 FLAT WASHER...350308-00 3...6...1/2

More information

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At

More information

VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS

VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS Tools required: 10mm/13mm socket and 3/8 drive ratchet with extension Torx T20/25/30 screwdrivers or bits Phillips head screwdriver,

More information

INSTALLATION GUIDE PREMIUM FRONT BUMPER. AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL

INSTALLATION GUIDE PREMIUM FRONT BUMPER. AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL PREMIUM FRONT BUMPER AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL 2012 3 0026032.0 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER Please read before beginning Stainless steel hardware may

More information

INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES

INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY

More information

2007 Hummer H3. 2007 ACCESSORIES & EQUIPMENT Bumpers and Fascias - H3. Fastener Tightening Specifications Specification Application

2007 Hummer H3. 2007 ACCESSORIES & EQUIPMENT Bumpers and Fascias - H3. Fastener Tightening Specifications Specification Application SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS REPAIR INSTRUCTIONS FRONT BUMPER REPLACEMENT 2007 ACCESSORIES & EQUIPMENT Bumpers and Fascias - H Fastener Tightening Specifications Specification Application

More information

LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963

LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Thank you for purchasing LG Motorsports products for your Gen 5 Camaro. Parts Inventory:

More information

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS TRAILER CLASS I HITCH

GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS TRAILER CLASS I HITCH PART NUMBER: 0000-8E-R01 GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS TRAILER CLASS I HITCH APPLICABLE MODELS: 2013 > CX-5 PACKAGE CONTENTS WARNING: ALTHOUGH THIS HITCH IS DESIGNED TO SAFELY TOW IT S

More information

INSTALLATION INSTRUCTIONS ELEVATION REAR BUMPER RAM

INSTALLATION INSTRUCTIONS ELEVATION REAR BUMPER RAM INSTALLATION INSTRUCTIONS PARTS LIST: 1 Elevation Bumper Assembly 4 8mm x 40mm Hex Bolts 1 Universal License Plate Light 4 8mm x 28mm x 3mm Flat Washers 8 12-1.75mm x 50mm Hex Bolts 4 8mm Lock Washers

More information

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors 87-95 Jeep Wrangler IMPORTANT NOTICE: Carefully read instructions before attempting to install this product. Rampage Products

More information

REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH)

REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH) Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH) Please read before beginning Stainless steel hardware

More information

Forge Motorsport Skoda Fabia VRs 130pd Front Mount Intercooler.

Forge Motorsport Skoda Fabia VRs 130pd Front Mount Intercooler. Forge Motorsport Skoda Fabia VRs 130pd Front Mount Intercooler. Forge Motorsport recommend professional fitment of this product. We take no responsibility for any personal injury or vehicle damage during

More information

LIFT-505. BMF Lift Kit. Yamaha Drive Gas or Electric. Installation Instructions

LIFT-505. BMF Lift Kit. Yamaha Drive Gas or Electric. Installation Instructions LIFT-505 BMF Lift Kit Yamaha Drive Gas or Electric Installation Instructions Contents of LIFT-505 Yamaha Drive BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger

More information

Installation Instructions

Installation Instructions 85-3857 rev. 04 03-16 Installation Instructions Thank you for purchasing this antisway bar kit. Please read through these instructions before installation. Front Anti-Sway Bar TruTrac Bar Combo Kit for

More information

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE

More information

Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top.

Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top. Here are some pictures to show what s required when replacing the A/C compressor, expansion valve and receiver/drier on a 2001 Volvo V70. Even if you don t replace these A/C parts these pictures can help

More information

Installation Instructions Kit, Base Rail Bracket Part # 31404

Installation Instructions Kit, Base Rail Bracket Part # 31404 Installation Instructions Kit, Base Rail Bracket Part # 31404 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions. provide important operating and

More information

2011 KIA Optima SX / EX Turbo Mesh Grille

2011 KIA Optima SX / EX Turbo Mesh Grille IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! TOOLS REQUIRED 2011 KIA Optima SX / EX Turbo Mesh Grille Upper and Lower Overlay Part #: Complete 1310-0102-11SX / Black Ice Part #1310-B102-11SX

More information

Rize Industries, LLC. 2005/2006 Ford SuperDuty Installation Instructions Suspension Lift Kit Part# 410-306-042 & 410-308-042

Rize Industries, LLC. 2005/2006 Ford SuperDuty Installation Instructions Suspension Lift Kit Part# 410-306-042 & 410-308-042 2005/2006 Ford SuperDuty Installation Instructions Suspension Lift Kit Part# 410-306-042 & 410-308-042 While this kit is an easy bolt-on system, strongly recommends that a professional installation center

More information

WARNING TO END USER, INSTALLER AND SELLER OF THIS PART!

WARNING TO END USER, INSTALLER AND SELLER OF THIS PART! WARNING TO END USER, INSTALLER AND SELLER OF THIS PART! By installing this part you are accepting full responsibility and liability for proper wheel and tire fitment after installation. It is the installer

More information

2012-2014 Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: 4 x 1/4 washers Wax & Grease Remover

2012-2014 Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: 4 x 1/4 washers Wax & Grease Remover 2012-2014 Toyota Tacoma Winch Mount Bumper Installation Instructions Tools Required: Items Included: Small flat head screw driver Winch Mount Bumper Ratchet, 10mm, 14mm & 19mm sockets 2 x Slider Plates

More information

Installation Instructions: (Part # SB76880) XRC Armor Front Fender Kit

Installation Instructions: (Part # SB76880) XRC Armor Front Fender Kit WARNING: Check with Local and State laws before installing this accessory! NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty Parts Included:

More information

Chevy SuperRail Mounting Kit #3345

Chevy SuperRail Mounting Kit #3345 Chevy SuperRail Mounting Kit #3345 #4100 SuperGlide (16K) #4400 SuperGlide (18K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)

More information

Installation Instructions PART NUMBERS: 24934, 60372, 77321

Installation Instructions PART NUMBERS: 24934, 60372, 77321 Cequent Performance Products, Inc. Installation Instructions PART NUMBERS: 24934, 60372, 77321 Applications: Years Make Models 2011-Current* Mini Countryman *Visit our website for the most up to date information

More information

MGB Chrome Bumper Conversion

MGB Chrome Bumper Conversion MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different

More information

Installation Instructions

Installation Instructions Installation Instructions GL18007-30 Trailer Hitch 440 South Pine Street Burlington, WI 53105 262-763-8222 rivcoproducts.com 2012 & NEWER GL1800 TRAILER HITCH INSTALLATION INSTRUCTIONS #GL18007-30 Read

More information

2011 F250 6 SUSPENSION KIT

2011 F250 6 SUSPENSION KIT 92156400 Thank you for choosing Rough Country for your suspension needs. 2011 F250 6 SUSPENSION KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,

More information

Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab

Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers

More information

2011-14 F250 6 RADIUS ARM KIT

2011-14 F250 6 RADIUS ARM KIT 92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,

More information

KDT916 - Watts Link - Complete Assembly

KDT916 - Watts Link - Complete Assembly KDT916 - Watts Link - Complete Assembly Please read all instructions carefully prior to installation and verify all kit contents and tools are on hand prior to installation. Professional Installation by

More information

Installation manual. Long arm kit. 2003-20 Ram 2500 3500. Part # 30942

Installation manual. Long arm kit. 2003-20 Ram 2500 3500. Part # 30942 Installation manual Long arm kit 2003 2003-12 Ram 3500 Part # 30942 sj09032010rev.01 Part # 30942 2003-20 Ram 2500 3500 Long arm kit Part # Description Qty. 30940-01 Cross member bracket shim 4 30940-02

More information

TOOL SVC NUMBERS: 250-2598, 250-2600 SVC CONTENTS ITEM QTY DESCRIPTION PART NUMBER 1 1 CUTTING TOOL 250-2598 2 1 EXTRACTION TOOL/PART# 250-2600

TOOL SVC NUMBERS: 250-2598, 250-2600 SVC CONTENTS ITEM QTY DESCRIPTION PART NUMBER 1 1 CUTTING TOOL 250-2598 2 1 EXTRACTION TOOL/PART# 250-2600 07-08 TOYOTA FJ CRUISER, 05-09 SIENNA, 06-08 SCION TC PART NUMBER: 250-1732 1 CRUISE CONTROL KIT TOOL SVC NUMBERS: 250-2598, 250-2600 2 2 1 BASE KIT CONTENTS ITEM QTY DESCRIPTION 1 1 CONTROL SWITCH ASSEMBLY

More information

INSTALLATION INSTRUCTIONS MOUNTING KIT FOR ELITE SERIES

INSTALLATION INSTRUCTIONS MOUNTING KIT FOR ELITE SERIES INSTALLATION INSTRUCTIONS MOUNTING KIT FOR ELITE SERIES DEALER/INSTALLER: (1) Provide this Manual to end user. END USER: (1) Save this Manual for future reference. (2) Pass on copies of Manual to any other

More information

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129 PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: The information included in this Splendide Repair Manual may change without notice. Please see our web site www.splendide.com/service/docs.html for updates,

More information

»Product» Safety Warning

»Product» Safety Warning C1200 Installation Instructions 2007-2016 Chevy/GM 1500 2/4wd 2" Strut Spacer Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad

More information

kelderman air ride 2003 & Newer Dodge Front 5-6 Lift Kit Warranty Disclaimer Notice Read Before Beginning Installation

kelderman air ride 2003 & Newer Dodge Front 5-6 Lift Kit Warranty Disclaimer Notice Read Before Beginning Installation Air Ride Conversion System Installation Instructions 800 334-6150 www.keldermanairride.com kelderman air ride The difference in the ride is like night and day Inside this manual: 2003 & Newer Dodge Front

More information

Solstice/Sky Water Pump Replacement

Solstice/Sky Water Pump Replacement Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the

More information

Model A Turn Signal Kit Installation Guide

Model A Turn Signal Kit Installation Guide Model A Turn Signal Kit Installation Guide Consumer Hot Line: 888-471-LOGO 770-476-7322 In Atlanta, GA http://www.logolites.com P/N: 100-005/G 2003 3407 Hwy. 120 Duluth, GA 30096, USA Logo Lites and the

More information

STEALTH. The MOST Versatile and Easiest To Use Towed Vehicle Braking System available! INSTALLATION MANUAL

STEALTH. The MOST Versatile and Easiest To Use Towed Vehicle Braking System available! INSTALLATION MANUAL 90 STEALTH The MOST Versatile and Easiest To Use Towed Vehicle Braking System available! PROFESSIONAL INSTALLERS: Please return these instructions to the owner, for the owner s future reference INSTALLATION

More information

Parts List. Safety Information. Additional Considerations. Retractable Security Cover Kit. Rocky Roller Kit

Parts List. Safety Information. Additional Considerations. Retractable Security Cover Kit. Rocky Roller Kit Parts List Retractable Security Cover Kit 3" PVC pipe with (4) 7'4" lengths of track (longer pools will have additional track pieces) Leading edge Optional cover pump (for outdoor installations) Rocky

More information

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating to ensure proper

More information

Part # 11366799 73-87 Chevy C10 AirBar

Part # 11366799 73-87 Chevy C10 AirBar 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11366799 73-87 Chevy C10 AirBar Components: 2 90009000 Tapered sleeve air spring 2 90000070 Air spring

More information

OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH

OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching procedures in this Manual to

More information

TOYOTA Tundra 2007 - BACK-UP CAMERA SYSTEM Preparation

TOYOTA Tundra 2007 - BACK-UP CAMERA SYSTEM Preparation Preparation Part Number(s): PT233-34070, PT923-35070-11, PT923-35070-43 NOTE: Part number of this accessory may not be the same as part number shown. Back Up Monitor Kit Contents PT923-35070-11 / PT923-35070-43

More information

Aluminum Trailer Kit Assembly Overview

Aluminum Trailer Kit Assembly Overview Aluminum Trailer Kit Assembly Overview VERY IMPORTANT: ALWAYS REFER TO YOUR OWNER S MANUAL FOR PROPER OPERATING AND SAFETY INFORMATION REGARDING YOUR TRAILER & PARTS LIST. Step 1: Remove All Parts Remove

More information

Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System

Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System Front Components: 1 11330999 Front CoolRide

More information

Mini Cooper and S Trailer Receiver Hitch Installation Instructions

Mini Cooper and S Trailer Receiver Hitch Installation Instructions Application Mini Cooper and S 3 Door Hatch or Convertible; M1001-02-06 Mini Cooper M1002-02-06 Mini Cooper S Hitch Capacity 1400 lbs gross, 200 lb max tongue Notes: This hitch features a removable ball

More information

AWE Tuning Air/Air Intercooler Kit for 2000-04 Audi 2.7T

AWE Tuning Air/Air Intercooler Kit for 2000-04 Audi 2.7T AWE Tuning Air/Air Intercooler Kit for 2000-04 Audi 2.7T Congratulations on your purchase of the AWE Tuning Intercoolers for your 2.7T Audi. Hundreds of hours of design and operational testing were spent

More information

Installation Instructions

Installation Instructions Installation Instructions SRC Rear Bumper (Part # 76612) 2007-2012 Jeep Wrangler (JK) For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA

More information

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms Components: 2 90006781 267c air spring 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms 1 90000626

More information

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS. 2012-2015 BMW 335i 3.0L

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS. 2012-2015 BMW 335i 3.0L Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS 2012-2015 BMW 335i 3.0L 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 21-2057DK AIR FILTER 1 2 9-0442 TUBE;

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 1310 YEARS: 010-PRESENT Safety glasses should be worn at all times while installing this product. INSTALLATION INSTRUCTIONS MODEL: GL350 BLUETEC AWD, GL50 & GL550 MAKE: MERCEDES BENZ STYLE: SUV WARNING:

More information

Extendable Trailer Towing Mirror

Extendable Trailer Towing Mirror Extendable Trailer Towing Mirror Installation Instructions For: 1997-2001 Ford F150 CIPA Part Numbers 72000 & 82000 WARNING Manufacturer recommends this installation be carried out by a professional installer

More information

Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC

Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC 1. Unscrew the shift knob by rotating counter clockwise, set it aside for now. 2. Remove the portion of the console with the shift

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 117 YEARS: 01-PRESENT Safety glasses should be worn at all times while installing this product. INSTALLATION INSTRUCTIONS MAKE: JEEP MODEL: CHEROKEE STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S

More information

Part # 11060210 59-64 Impala SA CoilOver Suspension Package

Part # 11060210 59-64 Impala SA CoilOver Suspension Package 350 S. St. Charles St. Jasper, In. 47546 Part # 11060210 59-64 Impala SA CoilOver Suspension Package Front Components: 1 11053510 HQ Series Front Coilovers 1 11052899 Front Lower StrongArms 1 11053699

More information

INSTALLATION MANUAL MODEL RP-100

INSTALLATION MANUAL MODEL RP-100 INSTALLATION MANUAL FOR 12 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 1994 THROUGH 1998 MODEL RP-100 READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION 5400 BUSINESS 50 WEST SUITE 8 573 635-0555

More information

11367 INSTALLATION INSTRUCTIONS

11367 INSTALLATION INSTRUCTIONS 11367 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 2013 MAKE: BMW MODEL: 328i STYLE: SEDAN WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

TOYOTA TUNDRA 2015 Billet Grille w/led DRL

TOYOTA TUNDRA 2015 Billet Grille w/led DRL TOYOTA TUNDRA 2015 Billet Grille w/led DRL Part Number: 00016-34088 Accessory Code: BG3000 Conflicts Models 1794 and Platinum Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3

More information

FUEL MOTO MICRO EFI TUNER 2012 HARLEY-DAVIDSON SOFTAIL/DYNA MODELS. 1 Micro Tuner Module 1 USB Cable 1 CD-ROM 1 Installation Guide 2 Velcro

FUEL MOTO MICRO EFI TUNER 2012 HARLEY-DAVIDSON SOFTAIL/DYNA MODELS. 1 Micro Tuner Module 1 USB Cable 1 CD-ROM 1 Installation Guide 2 Velcro FUEL MOTO MICRO EFI TUNER INSTALLATION INSTRUCTIONS 2012 HARLEY-DAVIDSON SOFTAIL/DYNA MODELS PARTS LIST 1 Micro Tuner Module 1 USB Cable 1 CD-ROM 1 Installation Guide 2 Velcro 1 Alcohol swab 1 Posi-Tap

More information

Installation Instructions

Installation Instructions 85-3976 rev. 05 08-13 Installation Instructions Thank you for purchasing this antisway bar kit. Please read through these instructions before installation. Rear Anti-Sway Bar Kit for Dodge Ram Pick-Up

More information

Trailer Receiver Hitch Installation Instructions

Trailer Receiver Hitch Installation Instructions Model/Applications: Hitch Part #: 1003, 1004, 1007, 1008 R56 07-14 Mini Cooper S Hardtop R57 09-15 Mini Cooper S Convertible R58 10-15 Mini Cooper S Coupe R59 11-15 Mini Cooper S Roadster Hitch Capacity:

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

4 & 6 4-Link Suspension Systems. Ford Super Duty 4WD Part#: ,

4 & 6 4-Link Suspension Systems. Ford Super Duty 4WD Part#: , Part#: 013013, 013014 4 & 6 4-Link Suspension Systems Ford Super Duty 4WD 2011-2015 Rev. 020315 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail:

More information

Headlight Removal & Installation: BMW E46

Headlight Removal & Installation: BMW E46 Headlight Removal & Installation: BMW E46 DISCLAIMER Buyer assumes any and all risk and liability from the installation and use of this product. Seller, author, or any of their affiliates assume no liability

More information

Hanson Offroad 6951 McDivitt Dr. Bakersfield CA 93313 U.S.A. 877-757-9779

Hanson Offroad 6951 McDivitt Dr. Bakersfield CA 93313 U.S.A. 877-757-9779 Remove stock bumper. Retain the stock bolts that attached the bumper to the sides of the frame. There are four holes in the back of the frame. You will need to enlarge the far right hole using a drill

More information

13172 INSTALLATION INSTRUCTIONS

13172 INSTALLATION INSTRUCTIONS 13172 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 2014-PRESENT MAKE: JEEP MODEL: CHEROKEE STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S

More information

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 1. Lay out and familiarize yourself with the components and hardware supplied with the hitch. Note the included trailer wiring isolator

More information

Lincoln Mark VII Power Window Motor Repair

Lincoln Mark VII Power Window Motor Repair Lincoln Mark VII Power Window Motor Repair Is your door no longer going up and down? Does the window motor make a horrible sound when in use? Does your window no longer work at all? You may need to replace

More information

TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation

TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield

More information

YAMAHA ROADLINER & STRATOLINER With CORBIN SADDLEBAGS Trailer Hitch Installation Instructions READ ALL INSTRUCTIONS BEFORE YOU START

YAMAHA ROADLINER & STRATOLINER With CORBIN SADDLEBAGS Trailer Hitch Installation Instructions READ ALL INSTRUCTIONS BEFORE YOU START YAMAHA ROADLINER & STRATOLINER With CORBIN SADDLEBAGS Trailer Hitch Installation Instructions READ ALL INSTRUCTIONS BEFORE YOU START ATTENTION INSTALLER: THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER!!!

More information

Sidekick / Tracker Solid Axle Suspension 2 Door Installation Instructions

Sidekick / Tracker Solid Axle Suspension 2 Door Installation Instructions 1031 Narregan St. * Medford, OR 97501 * 1-877-789-8547 * www.trailtough.com Disassembly Sidekick / Tracker Solid Axle Suspension 2 Door Installation Instructions 1. Lift vehicle and support by frame &

More information

M-2004-MBA Brake Duct Kit 2013 BOSS 302, Mustang GT and California Special INSTALLATION INSTRUCTIONS

M-2004-MBA Brake Duct Kit 2013 BOSS 302, Mustang GT and California Special INSTALLATION INSTRUCTIONS Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE

More information

FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 510-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS

FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 510-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 50-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS FLAG NOT INCLUDED. FOR INFORMATION ON USA FLAG ETIQUETTE REFER TO www.usflag.org FOR INFORMATION ON CANADA

More information

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents -J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English

More information

Strech Plastics Manufacturers & Distributors of the Highest Quality Golf Car Products

Strech Plastics Manufacturers & Distributors of the Highest Quality Golf Car Products Strech Plastics Manufacturers & Distributors of the Highest Quality Golf Car Products INSTALLATION INSTRUCTIONS BOLT ON 4 PASSENGER SEAT KIT FOR PRECEDENT Model: Club Car Precedent C-6-23 VISIT US ON THE

More information

Installation Guide 2010 BMW S1000RR Full Exhaust System

Installation Guide 2010 BMW S1000RR Full Exhaust System Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade

More information

Table of Contents WARNING SYMBOLS AND DEFINITIONS

Table of Contents WARNING SYMBOLS AND DEFINITIONS Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...

More information

INSTRUCTION MANUAL Kwik Slide

INSTRUCTION MANUAL Kwik Slide INSTRUCTION MANUAL Kwik Slide PLYMOUTH, MI FOR USE WITH 30048 DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate sliding procedures in this Manual to end user. (3) Have end

More information