Ph. D. in Electrical and Electronics Engineering Çukurova University, Adana

Transcription

1 Çukurova University Electrical and Electronics Engineering Department Sarıcam / ADANA Phone: /140 GSM: cbayindir@cu.edu..tr K. Çağatay BAYINDIR Bolu-1973, Married, Completed military service Education Ph. D. in Electrical and Electronics Engineering Çukurova University, Adana M.Sc. in Electrical and Electronics Engineering Middle East Technical University, Ankara B. Sc. in Electrical and Electronics Department Middle East Technical University, Ankara Experience Çukurova University Electrical and Electronics Engineering Department, Adana Assistant Professor June Areas of Interest Power Generation, Transmission and Distribution Electrical Power Quality PV and Wind Energy Systems Modeling of Power Electronic Systems Control Applications in Power Electronic Systems Energy Management and Energy Efficiency Lectures EEE 317 Utilization of Electrical Energy EEE 465 Power Electronics 1 EEE 464 Power Electronics 2 EEE 463 Illumination Techniques EEE 420 High Voltage Techniques EE 607 Advanced Power Electronics 1 EE 604 Advanced Power Electronics 2

2 Erdemir Engineering and Management Consultancy Co., October 2004 April 2009 İsdemir Office Electrical and Automation Chief Engineer Responsibilities Responsible for the execution of technology research, technical specification preparation, tender, technical clarification, contract, basic and detail engineering, equipment purchase, erection and commissioning phases of electrical and automation part of below listed projects mainly on Electric Energy Generation, Transmission, Distribution and Utility Systems. Manages a team of engineers and technicians to execute the above mentioned works. Projects 380/154/34.5 kv GIS Substation and Erzin-Ġsdemir 380 kv Transmission Line Project (Scope: 380 kv GIS Switchgear, 154 kv GIS Switchgear, 34.5 kv GIS Switchgear, 380 / 154 kv 250 MVA Auto Transformers, 154/34.5 kv 150 MVA Power Transformers, SCADA System, Load Shedding System, Communication Network, Protection Relays, 154 kv Cable Connections to Existing Substation). 154 kv Substation and Static Var Compensation System (Scope: 154 kv Switchgear, 34.5 kv Switchgear, 154/34.5 kv 80 MVA Power Transformers, 60 MVAR Static Var Compensation System). Modernization of 3*60 MVA and 2*25 MVA Steam Turbine Generators (Scope: P&ID design, Turbine and Generator Control System, Governer, Exciter, Protection Relays, Vibration Monitoring System, Hydrogen Monitoring System, Instrumentation, Cabling). 2*154/6.3 kv 55 MVA Power Transformers and Busducts. Ġsdemir 250ton/h no:6&7 Steam Boilers (Scope: 6.3 kv substation, 6.3/0.4 kv Distribution transformers, MV/LV motors, DCS Control system, Instrumentation, Cabling ). Ġsdemir No: 6 Turbo Blower (Scope: Turbine and Blower Control System, Governer, Vibration Instrumentation, Cabling). 3.5 million ton/year Hot Strip Mill Water Treatment Plant Monitoring System, (Scope: 34.5/6.3 kv 25 MVA Power Transformers, 6.3 kv Substation, 6.3/0.4 kv distribution transformers, 34 pieces MV motors, LV motors, Control System, Instrumentation, Cabling). Blast Furnace Gas Holder, OG Gas Holder, COG Gas Holder. (Scope: 6.3/0.4 kv Distribution transformers, MV/LV motors, Control system, Instrumentation, Cabling ). Cranes (Scope: Drives, LV Motors, Control system, Instrumentation, Cabling ). Ġsdemir RMS-A and RMS-B Natural Gas Stations (Scope: LV power distribution, Control System, Measurement System, Instrumentation, Cabling ). Ġsdemir Proses Water Supervision System (Scope: Control System, RF Modems, Instrumentation, Cabling ). Ġsdemir Power Distribution System Analysis (Scope: Collection of power system data, Single Line Diagrams, Load Flow and Harmonic Analysis using Electrical Transient Analysis Program ETAP ).

3 Sasa DuPont Sabancı Polyester Sanayi A.Ş., Adana August 2000 October 2004 Utilities E&I Maintenance and Engineering Leader Responsibilities Responsible for the management of E&I maintenance activities of steam vaporizers, thermal fluid vaporizers, HVAC systems, air compressors, chillers, cooling towers, water treatment plants, tank farms. Responsible for the operation and maintenance of 154 kv switchyard, MV and LV systems. Responsible for taking the necessary actions to meet safety, plant uptime and budget goals for the E&I Maintenance Group including routine and preventive maintenance. Member of Electrical Safety Committee and Energy Conservation Committee. Managed a team of supervisors and technicians, working seven days a week, on three shifts. Projects Leaded the ISO 9002 certification of maintenance group of utilities and succeeded in receiving the ISO 9002 in a very short period. Involved in the restructuring of maintenance groups in the guidance of an expert company. Revised the maintenance plans, job plans and preventive maintenance plans for the utilities. Leaded the commissioning work of a thermal fluid vaporizer, two high pressure compressors and several air handling units. Leaded six sigma projects on the performance improvement of thermal fluid vaporizers, on the electrical energy optimization of cooling towers and water treatment plant and on optimization of compressed air systems Leaded a Process Hazards Analysis (PHA) study on the main tank farm of Sasa DuPontSA. Applied hazards analysis techniques and prepared a report to be presented to the top management. Performed engineering studies towards preventive maintenance like thermographic inspection and vibration analysis. Şişecam Trakya Cam Sanayii A.Ş., Mersin April August 2000 Control Engineer Involved in the operation and maintenance of highly automated process control systems. Worked in the glass identification, cutting and packing area which was the most technology intensive region of the plant. Worked in preparing routine maintenance schedules. Mudurnu Tavukçuluk A.Ş., Bolu February 1998 February 2000 Technology Advisor Worked part-time during the start-up of a poultry processing plant with engineers from STORK, a Dutch company. Provided technical support to a team of technicians in maintaining and operating the process control systems, electronic weighing and distribution systems and various meat processing machines. Organized the supply of spare parts and coordinated the technical relationships with STORK.

4 Middle East Technical University, Electrical and Electronics Engineering Department, Ankara November April 2000 Research Assistant Conducted a research on modeling and simulation techniques in power electronics. Designed and simulated a shunt active power filter system that cancels the current harmonics in the power system and provides reactive power compensation. Attended lectures and laboratory sessions in electrical machines and power electronics section. Başarı Elektronik A.Ş., Ankara July 1995 August 1996 Design Engineer Worked as a design engineer in Research and Development Department. Involved in the design of a smart card operated prepayment Energy-Hour meter. Trainings and Seminars ISO 9001:2000 Quality Management System Training, 2 days, June 2007 ISO 9001:2000 Quality Management System Internal Auditor Training, 2 days, August 2007 Microsoft Project and Project Management, 5 days October SVC System Training, Nokian Capacitors Finland, 1 week September 2006 Safety Instrumented System, Emerson, 1 day, February 2006 STC 2000 Turbine Control System, ICS USA, 2 weeks, September 2005 Process Hazards Analysis Leader Training, DuPont, 3 days, February Energy Manager Training, Eletrik ĠĢleri Etüd Ġdaresi, 2 weeks, May ix Sigma Training,DuPont, 12 days, May Critical Factors in Management, Sabancı Holding, 3 days, October Skills For Being Effective, Sabancı Holding, 2 days, May A General Look at Human Resources, Sabancı Holding, 2 days, April Presentation Skills, Sabancı Holding, 2 days, January Emphatic Communication, Sabancı Holding, 2 days, October Creative Thinking and Problem Solving, Sabancı Holding, 2 days, September Team Leadership, Sabancı Holding, 2 days, June Communication and Living Well, Sabancı Holding, 2 days, May Turkish Economy and Future Perspective, Sabancı Holding, 2 days, March Group Dynamics, Sabancı Holding, 2 days, February Various DuPont Trainings on Safety, Health and Environment. Siemens S7 300/400 Training, Siemens, 1 week, Siemens, June Total Quality Management and Creative Thinking, ġiģecam, July Various other trainings, factory acceptance tests and seminars on technical concepts.

5 Publications International Journals BAYINDIR KC., CUMA MU, TUMAY M. Hierarchical neuro-fuzzy current control for a shunt active power filter. Neural Computing and Applications June 2006, Vol: 15, No:3-4, pp: BAYINDIR KC., ERMIS M. Understanding the modeling and analysis of a shunt active power filter using MATLAB/Simulink. International Journal of Electrical Engineering Education ( IJEEE) July 2006, Vol: 43, No:3, pp: BAYINDIR KC., TUMAY M., CUMA M.U., Fuzzy logic PWM current controller based shunt active power filter for power quality compensation, Engineering Intelligent Systems For Electrical Engineering And Communications March 2008, Vol.16, Iss.1, pp TUMAY M., MERAL M.E., BAYINDIR, KC., Extraction of Voltage Harmonics Using Multi-Layer Perceptron Neural Network, Neural Computing and Applications Oct Vol. 17, Iss. 5-6, pp TUMAY M., MERAL M.E., BAYINDIR, KC., Sequence Reference Frame-Based New Sag/Swell Detection Method for Static Transfer Switches, IET Power Electronics, Vol. 2, Issue 4, July 2009, pp CUMA M.U., TEKE A., TUMAY M., BAYINDIR, KC., OZGUR M. S., Experimental Architecture of a DSP Based Signal Generation for PWM Inverter, Computer Applications in Electrical Engineering, April MERAL M.E., TEKE A., BAYINDIR, KC., TUMAY M., Power Quality Improvement with an Extended Custom Power Park, Electrical Power System Research, Vol.79, Issue 11, November 2009, pp TEKE A, BAYINDIR K., TUMAY M., Fast Sag/Swell Detection Method for Fuzzy Logic Based Dynamic Voltage Restorer, IET Generation, Transmission & Distribution, Volume: 4 Issue: , pp International Conferences TÜMAY M., BAYINDIR K. Ç., CUMA M. U., TOKUNÇ C. O., Dynamic Voltage Restorer with Zero Sequence Compensation. Eleventh International Conference on Electrical Machines, Drives and Power Systems (ELMA 2005) Proceedings, vol 1, pp: TÜMAY M., CUMA M. U., TEKE A., BAYINDIR K. Ç., Fuzzy Logic Control of Dynamic Voltage Restorer., Eleventh International Conference on Electrical Machines, Drives and Power Systems (ELMA 2005) Proceedings, vol:, pp: TÜMAY M., TEKE A., BAYINDIR K. Ç., CUMA M. U., Simulation and Modeling of a Dynamic Voltage Restorer. 4 th International Conference on Electrical and Electronics Engineering (ELECO 2005) Proceedings, vol: Electric Control, pp:

6 TÜMAY M., BAYINDIR K. Ç., CUMA M. U., A Three-Phase Four-Wire Shunt Active Power Filter with High DC Link Voltage Utilization. Artificial Intelligence in Energy Systems and Power AIESP TÜMAY M., EKĠZ A., BAYINDIR K. Ç., CUMA M. U.,2006. Power System Harmonics and Compensation for Energy Quality and Management in Real Plants. Artificial Intelligence in Energy Systems and Power AIESP BAYINDIR K. Ç., TEKE A., TÜMAY M., A Robust Control of Dynamic Voltage Restorer Using Fuzzy Logic. International Aegean Conference on Electrical Machines and Power Electronics (ACEMP 2007) Proceedings, pp: TÜMAY M., BAYINDIR K. Ç., CUMA M. U., TEKE A., Experimental Setup for A DSP Based Single-Phase PWM Inverter. 5 th International Conference on Electrical and Electronics Engineering (ELECO 2007) Proceedings, vol: Electric Control, pp: BAYINDIR K. Ç., TEKE A., YIĞIT I., MERAL M. E., TÜMAY M., YALCIN B., Power Quality Survey on South Industrial Districts of Turkey. International Conference on Power Systems, ICPS TÜMAY M., KAPLAN Y. A., TEKE A., MERAL M. E., BAYINDIR K. Ç., CUMA M. U., SARIBULUT L., PSCAD Modeling of Custom Power Park for Power Quality. 5th International Conference on Electrical Engineering October 2008, Batna University, Avenue Boukhlouf Hadi 05000, Batna, ALGERIA TAN A., ġenses M. O., TEKE A., MERAL M. E., BAYINDIR K. Ç., TÜMAY M., Ġnternet Tabanlı Elektrik Enerjisi ve Güç Kalitesi Ġzleme Sistemi. 3. Enerji Verimliliği ve Kalitesi Sempozyumu Bildiri Kitabı, sayfa , Kocaeli, Mayıs 2009.