Contents. OSHA (Occupational Safety and Health Act)
|
|
- Chester Mills
- 7 years ago
- Views:
Transcription
1 Contents OSHA (Occupational Safety and Health Act)... 2 OSHA Regulations...3 OSHA Inspections... 4 First Aid Kit...5 Frequent OSHA Violations... 6 OSHA Accident Recordkeeping... 7 Electrical LOCKOUT-TAGOUT...8 How to Lock-out Equipment...9
2 OSHA's purpose is: To preserve our human resources by providing safe and healthful working conditions for every working man and woman in the nation. To provide employees the right to petition the administrators of the Act to review working conditions or any specific hazard the employee feels should be corrected. This law protects employees from any employer action; therefore, employees cannot be discriminated against because of their concern for safety. The local OSHA office provides publications, pamphlets and posters free of charge. Check the phone book yellow pages for the office nearest you. Page 2 OSHA (Occupational Safety and Health Act)
3 OSHA Regulations It is important to follow the OSHA regulations listed below for the safety of all employees. Standards Employee Responsibilities Follow all safety and health standards, rules, regulations and orders. Failure to do so can result in dismissal. Work safely. Manager on Duty Responsibilities Assume primary responsibility to help make the restaurant a safe place to work. Fix, or arrange to have fixed, all hazards immediately. Post the OSHA notice of safety regulations and penalties for violations. Hang A Safety and Health Protection on the Job poster in the restaurant. (This poster is free from your local OSHA office.) Give Hazardous Chemical Communication (HCC) Training to all employees, have them sign the HCC form and maintain it in the employee personnel file. Review KFC's Electrical LOCKOUT-TAGOUT practice with all employees OSHA (Occupational Safety and Health Act) Page 3
4 OSHA Inspections An OSHA compliance officer can visit at any time. After showing identification, he or she can check restaurant for violations. You and an employee representative have the right to go with the officer. This representative should be chosen in advance by co-workers and available so the inspection can go on. The Manager on Duty must follow the steps below when there is an OSHA inspection. Standards Call Your Supervisor Call the Area Coach right away. Go With Officer Go with compliance officer and employee representative on the inspection. Write Down Comments Write down items inspected and comments made by compliance officer. Fix Problems Fix the problem, if possible, while the officer is in the restaurant. Get Copy of Report Get a copy of the inspection report before the officer leaves. If Cited, Call Supervisor If a restaurant is charged with safety deficiencies, call your Region Coach and the Loss Prevention Department right away. Page 4 OSHA (Occupational Safety and Health Act)
5 First Aid Kit The restaurant first aid kit should be stocked with the following items. Quantity Item 100 1" x 3" bandages 2 5 yd. roll gauze 1 5 yd. roll adhesive tape 1 Pair of tweezers 10 2" x 3" gauze pads 10 Ammonia inhalants 2 1/2 oz. Eye wash 1 Triangular bandage 1 pair of scissors 1 First aid burn cream 10 Iodine wipes 2 Cold packs (burns) 2 Oval eye pads 1 First aid manual 1 Pressure bandage 50 Band-Aids (knuckle & fingertip) 100 Band-Aids (1" x 3") OSHA (Occupational Safety and Health Act) Page 5
6 Frequent OSHA Violations Be alert to all possible violations that an OSHA compliance officer might find in your restaurant. Critical Areas Problems Floors Unclean or littered. Uncovered drains. Emergency exits Unclearly marked. Ladders Stored improperly. Broken or have slippery steps. Electrical No Electrical LOCKOUT-TAGOUT program. Frayed or spliced electrical cords or broken plugs. Electrical panels blocked or not clearly identified. Mechanical Unguarded cutting and chopping equipment. Faulty thermometers and thermostats on cooking equipment. Fire Equipment Empty, hidden or hard to reach. Medical or first aid None available or incomplete (refer to First Aid Kit chart). Kit has unauthorized medications, such as prescription drugs. Housekeeping No Hazardous Chemical Communication program. Wet or slippery floors; obstacles on floors, stairs, or in aisles. Cleaning supplies near shortening/food supplies. OSHA information not implemented or enforced OSHA poster not displayed. Serious Violations Critical Areas Emergency exits Electrical Fire Equipment Problems Key locked or blocked exits. Failure to ground food mixers, timers, or other electrical equipment. Fire extinguishers not inspected or improperly mounted. Page 6 OSHA (Occupational Safety and Health Act)
7 OSHA Accident Recordkeeping The Bureau of Labor Statistics can ask that restaurants in a certain area take part in a yearly survey of occupational injuries and illness. In this case, the Bureau will supply instructions and forms OSHA (Occupational Safety and Health Act) Page 7
8 Electrical LOCKOUT-TAGOUT The Occupational Safety and Health Administration requires that all employers set up a program to keep employees safe from accidentally turning on equipment. This requires that whenever an employee works on equipment which could cause harm if accidentally turned on, then that equipment must be unplugged. Follow KFC's procedures below to lockout the equipment. Store both a LOCKOUT and a TAGOUT tag at the circuit breaker box to be sure that they are easily available for employees or repair technicians to use. Failure to follow this recommendation can cause serious injury and large fines. Page 8 OSHA (Occupational Safety and Health Act)
9 How to Lock-out Equipment Follow the steps when locking out equipment. Standards Unplug Equipment Person doing repairs must have complete control of the plug. Lockout Equipment Go to breaker box, switch off the breaker for equipment being worked on; OR Lock the circuit breaker box with a key lock or combination lock to keep employees from using equipment. Tagout Equipment Go to circuit breaker box and switch off the breaker. Attach a Tagout tag to the circuit breaker or the circuit breaker box The Tagout tag warns employees not to open the box or turn on the breaker for the equipment under repair OSHA (Occupational Safety and Health Act) Page 9
WEEKLY SAFETY MEETING All Euramax Subsidiaries LOCKOUT / TAGOUT. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
More informationLOCKOUT/TAGOUT (LOTO) SAFETY PROGRAM
1 UNIVERSITY OF WEST FLORIDA LOCKOUT/TAGOUT (LOTO) SAFETY PROGRAM (EQUIPMENT HAZARD DE-ENERGIZING AND ISOLATION) DEPARTMENT OF ENVIRONMENTAL HEALTH AND SAFETY 11000University Parkway Pensacola, FL 32514
More informationSafety Resources from
Safety Resources from Sample Safety Program TABLE OF CONTENTS I. DECLARATION OF POLICY II. DUTIES AND RESPONSIBILITIES III. SAFETY COMMITTEE IV. PROGRAM REINFORCEMENT V. CORPORATE DRUG POLICY VI. HAZARD
More informationOSHA & Restaurants: Top 10 Frequently Cited Violations from October 2008 September 2009 for SIC Code 5812 Eating and Drinking Places
OSHA & Restaurants: Top 10 Frequently Cited Violations from October 2008 September 2009 for SIC Code 5812 Eating and Drinking Places www.marsh.com Discussion Frequently Cited OSHA Regulations Current Penalty
More informationCONTROL OF HAZARDOUS ENERGY (Lockout Tagout)
CONTROL OF HAZARDOUS ENERGY (Lockout Tagout) Many workplace accidents are caused by machinery that accidentally becomes activated while being serviced or maintained. This accidental activation is called
More informationC3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES. Leader s Guide. 2005, CLMI Training
C3306 LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES Leader s Guide 2005, CLMI Training LOCKOUT/TAGOUT FOR AUTHORIZED EMPLOYEES This easy-to-use Leader s Guide is provided to assist in conducting a successful
More informationLockout / Tagout Program
Lockout / Tagout Program Table of Contents Page Scope... 2 Definitions... 2 Authorization... 3 Responsibilities... 4 Compliance and Enforcement... 4 When to Lockout/Tagout (LOTO)... 5 Lockout Procedure...
More informationOccupational Health Program Safety Training Series. Lockout/Tagout Safety Awareness Training
Occupational Health Program Safety Training Series Lockout/Tagout Safety Awareness Training 1 Lock out/tag out Lock out: the placement of a lockout device (lock) on an energy isolating device in accordance
More informationALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.147 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) SECTION: 2400
OSHA REGULATION: 29 CFR 90.7 THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT / TAGOUT) DATE: 0/5/2008 DATE: /2/202 A. POLICY. This procedure follows requirements set forth in 29 CFR 90.7. 2. It is the policy
More informationLockout - Tagout. Control of Hazardous Energy OSHA Standard 1910.147
Lockout - Tagout Control of Hazardous Energy OSHA Standard 1910.147 You will learn Purpose of Lockout-Tagout Requirements for LOTO Types of Hazardous Energy Procedures for LOTO Types of Energy Electrical
More informationLOCKOUT/TAGOUT PROGRAM ENERGY CONTROL PLAN
LOCKOUT/TAGOUT PROGRAM ENERGY CONTROL PLAN March 2003 (Revised) St. Louis Community College Table of Contents Section # Title Page # 1 Purpose 1 2 Applicability 2 3 Program Overview 3 4 Energy Control
More informationThis program is listed as a mandatory inspection item on the MnOSHA Investigation Checklist, Item 7D.
Standard: Summary: Coverage: Workplace Accident and Injury Reduction Program RESOLUTION NO# 0809-88 Minnesota Statutes 182.653, A Workplace Accident and Injury Reduction Program Minnesota Rules 5205.1500,
More informationBWC Division of Safety and Hygiene
BWC Division of Safety and Hygiene A SAMPLE LOCKOUT/TAGOUT PROCEDURE A good Lockout/Tagout Procedure, at a minimum, should contain the following elements: 1. All maintenance personnel shall be provided
More informationDining Services OSHA Safety Training Program TRAINING RECORD
Dining Services OSHA Safety Training Program TRAINING RECORD Employee Title: This record documents the safety training received by Dining Services employees, including student employees, as required by
More informationHow To Protect Your Shop From Tripping Hazards
For Employers and Supervisors The hazards of poor housekeeping The purpose of this Crew Talk handout is to provide employers and supervisors with information to help protect their workers from injuries
More informationLOCK-OUT / TAG-OUT SAFETY TRAINING
LOCK-OUT / TAG-OUT SAFETY TRAINING Introduction Welcome to Lock-out Tag-out Training "So I m on the job one day, doing some repair on a cutting machine.replacing a guide on the table. Pretty routine everything
More informationControl of Hazardous Energy (Lockout / Tagout)
WAUKESHA COUNTY TECHNICAL COLLEGE Control of Hazardous Energy (Lockout / Tagout) Release Date: March 26, 2012 Revision Date: March 26, 2012 Revision Level: 1 TABLE OF CONTENTS Purpose... 1 Scope... 1 Responsibilities...
More informationA Workplace Accident and Injury Reduction Program (A.W.A.I.R.)
A Workplace Accident and Injury Reduction Program (A.W.A.I.R.) Adopted by: LifeStream Services, Inc., August 20, 2013 I. Management Policy on Safety and Health The safety of our employees is of foremost
More informationLockout Tagout Presentation For GOSH Group Aberdeen UK
Lockout Tagout Presentation For GOSH Group Aberdeen UK Presented By Ted Boynton General Manager Lockout Tagout Ltd. T:+44(0)1642 244017 Contents Lockout Tagout Safety Ltd What Is Lockout Tagout Relevant
More informationUnion County Public Schools. Facilities Department. Electrical. Safe Work Practices
1 Union County Public Schools Facilities Department Electrical Safe Work Practices 2 Purpose In accordance with OSHA Standards 1910.331-335, safety-related work practices shall be used by Union County
More informationLockout/Tagout Training Program
Lockout/Tagout Training Program (Student Handouts) Name Date This page intentionally left blank. Notes page: 2 Notes page: 3 Sample Written Program for Control of Hazardous Energy (Lockout/Tagout) 4 1910.147
More informationInjury & Illness Prevention Program (IIPP)
Injury & Illness Prevention Program (IIPP) Adapted from Cal/OSHA Workplace Injury & Illness Prevention Model Program for Non-high Hazard Employers CS-1B, 1995 Revisions: 2/92, 4/93, 5/95, 3/00, 3/04, 3/06,
More informationMaster Workplace Inspection Checklist for General Shop Safety. MASTER WORKPLACE INSPECTION CHECKLIST General Shop Safety
Integrated Risk Management Master Workplace Inspection Checklist for General Shop Safety Document Type: Form Control Number: UIRM- FM_012_50 File Code: UIRM-001 Last Reviewed: March 2014 Department/Unit:
More informationLockout - Tagout Program
Created by: Nora Velazquez Date: 02/13/03 Approved by: Nora Velazquez Supersedes: New Lockout - Tagout Program 3.1 Purpose 3.1.1 The safe control of hazardous energy is the purpose of the Lockout- Tagout
More informationControl of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147
Control of Hazardous Energy LOCKOUT/TAGOUT 29 CFR 1910.147 Contents I. Introduction II. Scope and Application III. Definitions IV. Lockout/Tagout Manual V. Energy Control Procedures 1. Applying Energy
More informationEASTERN MICHIGAN UNIVERSITY Revision 1
Page 1 of 5 I. PURPOSE This procedure is designed to protect personnel working on roofs and equipment on roofs from exposure to dangerous noise levels as the result of the Outdoor Warning System (OWS)
More informationWorkplace Injury & Illness Prevention Program
Workplace Injury & Illness Prevention Program ID Analytics Inc. For non-high hazard employers RESPONSIBILITY The Injury and Illness Prevention (IIP) Program administrator is Janet Wickens, Director Human
More informationSAFETY SELF-INSPECTION PROGRAM
Palm Beach State College Florida s First Public Community College SAFETY SELF-INSPECTION PROGRAM PALM BEACH STATE COLLEGE SAFETY SELF-INSPECTION PROGRAM 1. INTRODUCTION An important element of any employee
More informationADMINISTRATIVE PROCEDURE
ADMINISTRATIVE PROCEDURE D1:2A Safety and Security Occupational Health and Safety Annual Inspection Page 1 of 2 Annual School Inspection Protocol Worker members of the Joint Health & Safety Committee are
More informationPage85. Lock-out Tag-out Plan
Page85 Lock-out Tag-out Plan Page86 Lock-out / Tag-Out Plan Table of Contents 1. Policy 2. Purpose 3. Scope 4. General Procedures 5. Application of Control Procedure 6. Release from Control Procedure 7.
More informationTEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
More informationFACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH Safety signs are the primary way to communicate important warnings and messages to your employees, on-site contractors and other
More information3088 Lockout-Tagout Training Program Course Outline
3088 Lockout-Tagout Training Program Course Outline The following outline summarizes the major points of information presented in the course. The outline can be used to review the course before conducting
More informationLockout Tagout Program. Table of Contents
Environmental Health and Safety Name: Lockout Tagout Program Date Created: 2/1/2014 Date Revised: 11/17/2014 Created By: Jill Jones Table of Contents Purpose and Regulatory Standards... 1 Scope... 1 Employer
More informationHealthStream Regulatory Script
HealthStream Regulatory Script Control of Hazardous Energy: Lockout/Tagout Release Date: August 2009 HLC Version: 602 Lesson 1: Introduction Lesson 2: Energy Control Basics Lesson 2: Lockout and Tagout
More informationLockout/Tagout Compliance Guide and Checklist
Lockout/Tagout Compliance Guide and Checklist Scope: The OSHA Control of Hazardous Energy (Lockout/Tagout) standard (29 CFR 1910.147) covers the servicing and maintenance of machines and equipment in which
More informationMD 52 WASTE MANAGEMENT AUTHORITY CORPORATE HEALTH AND SAFETY PROGRAM
UNSAFE ACTS AND CONDITIONS All accidents are the result of an unsafe act, an unsafe condition or a combination of both. Unsafe acts account for approximately 80% of all incidents/accidents, while unsafe
More informationInjury & Illness (IIPP)
Associated Students, Inc. Injury & Illness Prevention Program (IIPP) Created on September 26, 2005 ASSOCIATED STUDENTS, INCORPORATED CALIFORNIA STATE POLYTECHNIC UNIVERSITY, POMONA EMPLOYEE ACKNOWLEDGEMENT
More informationEnergy Control Lockout/Tagout
Energy Control Lockout/Tagout Page Introduction Purpose. 2 Background. 2 Who s Covered... 3 Responsibilities. 3 Explanation of Key Terms. 4 How It Works General Lockout/Tagout Procedure. 5 General Lock/Tag
More informationElectrical Safety in the Workplace
Electrical Safety in the Workplace NFPA 70 E Presented by Sabine Mueller What Made Sabine Choose Such a DRY Topic? Ulterior Motive Metso Mueller Engineering has been visiting many scrap yards two or more
More informationExample risk assessment for cold storage warehousing
Example risk assessment for cold storage warehousing Setting the scene Frozen Foods Ltd provide cold storage and distribution facilities (at temperatures between -18 and -30 C) at three locations. They
More informationSELF-STUDY SERIES. UNDERSTANDING THE REGULATIONS: What Alaskan Foster Parents Need to Know. Updated January 2013. 1.0 Hour Training Credit
SELF-STUDY SERIES UNDERSTANDING THE REGULATIONS: What Alaskan Foster Parents Need to Know UNIT #10: Fire Safety, First Aid and Emergency Preparedness in the Foster Home Updated January 2013 1.0 Hour Training
More informationNotes. Material 1. Portable Ground Fault Interrupter 2. PPE (safety glasses, gloves, other) 3. Circuit Tester
OSHA's electrical standards include: 29 CFR 1910 Electrical Subpart S, 1994 revision 29 CFR 1910.147 - Control of Hazardous Energy (Lockout/ tagout) 29 CFR 1910.137 - Personal Protective Equipment Standard,
More informationOctober Safety Subject
October Safety Subject Electrical Hazards All electrical equipment should be kept in good repair. Replace defective equipment or have it repaired by a qualified person. Watch for wiring on appliances that
More informationName Of Occupancy Date. Yes No Describe
FIRE PREVENTION INSPECTION CHECKLIST For Class A Occupancy (For Assembly Buildings, Bars, Restaurants, Gyms, Churches, Arenas, Theatres or wherever people gather) Name Of Occupancy Date Physical Address
More informationPERSONNEL WORK PLACE SAFETY PROGRAM
5440 PERSONNEL WORK PLACE SAFETY PROGRAM Accidents are undesirable, unplanned occurrences which can be prevented and which often result in bodily harm, loss of school time, property damage, expensive legal
More informationElectrical Wiring Methods, Components and Equipment for General Use. Approved for Public Release; Further Dissemination Unlimited
Electrical Wiring Methods, Components and Equipment for General Use Approved for Public Release; Further Dissemination Unlimited At the completion of this unit you shall be able to: 1. Utilize section
More informationFarmers Restaurant Loss Prevention Program
Farmers Restaurant Loss Prevention Program Your Loss Prevention Program Many factors today can come between you, your investment and a safe Restaurant environment. An effective loss prevention program
More informationLockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147
Lockout-Tagout Training for University @ Albany Employees Control of Hazardous Energy OSHA standard 1910.147 University @ Albany SUNY Office of Environmental Health & Safety 518/442-3495 October 2010 Primary
More informationSafe Operating Procedure
Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu/) Introduction
More informationOSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Check/Service/Maintain/Repair/Install HVAC Equipment and Systems Job Title(s)
More informationINTRODUCTION TO OSHA PRESENTATION
Introduction to OSHA 2-hour Lesson Directorate of Training and Education OSHA Training Institute Lesson Overview Purpose: To provide workers with introductory information about OSHA Topics: 1. Why is OSHA
More information15GAL STEEL OIL DRAIN WITH 110V PUMP
15GAL STEEL OIL DRAIN WITH 110V PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationSafety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department
Safety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department Environmental Health and Safety (EHS) The Los Angeles Medical Center (LAMC) is committed to providing a safe
More informationLockout / Tagout Awareness
Lockout / Tagout Awareness 1 Introduction Lockout/Tagout ( LOTO ) is a technique used to prevent energy from being released during the servicing of equipment. This is accomplished by placing locks on energy
More information0150506194 C Limited 2nd through 5th Year Functional Parts Warranty During the 2nd through 5th year,haier will provide functional parts which prove to be defective due to workmanship
More informationLOCKOUT GUIDELINE. To ensure that a piece of equipment cannot be turned on, pressurized or switched on accidently while an employee is working on it.
Background LOCKOUT GUIDELINE Both Aspasa in its ISHE (Initiating Safety Health & Education) program and Sarma in its SHREQ (Safety, Health, Road Transport, Environment & Quality) program have seen that
More informationCitation 1 Item 1a. #22: Struck by Inspection #1081105
A 35 year old male employee was removing a high pressure hydraulic hose from an aluminum die-casting machine accumulator, when it fatality struck the employee in the neck & chest. The 3,000 ton die cast
More informationSafety and Health Office WORKPLACE SAFETY CHECKLIST
Location: Date: Inspected by: Safety and Health Office WORKPLACE SAFETY CHECKLIST WORK ENVIRONMENT Ventilation Removal of fumes and dust Temperature and humidity control Noise levels Vibration Lighting
More informationELECTRICAL SAFETY. The standard unit for measuring electrical current.
ELECTRICAL SAFETY Introduction The following sections provide general safety guidelines and procedures for electrical safety. This chapter covers the following topics: TOPIC PAGE General Electrical Safety
More informationHospitality Safety Solutions
4/2004 Hospitality Safety Solutions A Pedestrian Safety System to Increase Facility Safety and Reduce Liability Version 1.9 Increase Profits by Reducing Liability 65% of all lost workdays are due to slip-fall
More informationOCCUPATIONAL HEALTH AND SAFETY POLICY AND PROCEDURES MANUAL
OCCUPATIONAL HEALTH AND SAFETY POLICY AND PROCEDURES MANUAL Table of Contents Health and Safety Policy... 3 Occupational Health and Safety... 4 In Workplaces... 4 Duties of Workers... 4 What the law requires...
More information810. Health and Safety Policy
Adopted: May 14, 2012 Model Policy 810 Revised: June 22, 2015 Orig. 2012. 810. Health and Safety Policy I. PURPOSE The Windom School District strives to provide a safe, healthy work and educational environment
More informationUniversiti Tunku Abdul Rahman Manual Title : HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (HIRARC)
Procedure Number : QP-DSS-005 Rev No: 0 Effective Date: 07/04/2010 Page No: 1 of 13 1.0 Purpose The purpose of this SOP is to provide a systematic and objective approach to assessing hazards and their
More informationLOCKOUT/TAGOUT PROGRAM. Table of Contents
Western University of Health Sciences IIPP SUB-PROGRAM LOCKOUT/TAGOUT PROGRAM Table of Contents 1.0 INTRODUCTION 1 2.0 PURPOSE 1 3.0 RESPONSIBILITIES 1 Supervisors 1 Employees 1 4.0 TRAINING 2 5.0 WRITTEN
More informationRMM 306 Lockout/Tagout (LOTO) Program for the Control of Hazardous Energy Page 2 June 2016
RMM 306 Lockout/Tagout (LOTO) Program for the Control of Hazardous Energy Page 2 3 Related Documents 3.1 Occupational Health and Safety Act, R.S.O. 1990 3.2 Regulations for Industrial Establishments, R.R.O.
More informationEMERGENCY ACTION AND FIRE PREVENTION PLAN
Sample Written Safety Program For EMERGENCY ACTION AND FIRE PREVENTION PLAN Page 1 EMERGENCY ACTION AND FIRE PREVENTION PLAN (YOUR COMPANY NAME) EMPLOYEE EMERGENCY AND FIRE PREVENTION PLANS Emergencies
More informationWorkplace Safety Inspections Adopt a systematic approach by inspecting 8 areas of safety:
Workplace Safety Inspections Adopt a systematic approach by inspecting 8 areas of safety: 1. MANAGEMENT - An indication that the safety management system is working effectively is a good starting point.
More informationWEEKLY SAFETY MEETING All Euramax Subsidiaries HOUSEKEEPING. Safety Meeting Contents. Meeting Notice. Leaders Guide. Employee Handout.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
More information3053 Electrical Safety Training Program Course Outline
3053 Electrical Safety Training Program Course Outline The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting
More informationPLYMOUTH COLLEGE Risk Assessment: Policy Guidance
PLYMOUTH COLLEGE Assessment PLYMOUTH COLLEGE Assessment: Policy Guidance 1 Scope This guidance is applicable to all those with responsibility for undertaking risk assessments for activities which are under
More informationWorkshop Self Inspection Checklist WORK01
Workshop Self Inspection Checklist WORK01 General Mechanical Workshops Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides a basic framework
More informationSupermarket / Retail Safety Solutions
4/2004 Supermarket / Retail Safety Solutions A Pedestrian Safety System to Increase Facility Safety and Reduce Liability Version 1.9 Increase Profits by Reducing Liability Grocery stores around the country
More informationFirst. Aid. Regulation 1101 REQUIREMENTS
First Aid REQUIREMENTS Regulation 1101 Introduction This brochure is about the first aid requirements of the Workplace Safety and Insurance Board (WSIB). It contains the law (Regulation 1101) and the policy
More informationOSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
More informationHealth and Safety Activity Checklist
Health and Safety Activity Checklist Workplace Health, Safety and Compensation Commission of New Brunswick WHSCC CSSIAT Commission de la santé, de la sécurité et de l indemnisation des accidents au travail
More informationWalking and Working Surface Checklist:
Walking and Working Surfaces Purpose: This information is presented to improve the level of safety in our operations, and to inform you that we will comply with the OSHA Standard 29 CFR 1910.23. Responsibility:
More information2015 Construction Workers Compensation and OSHA Update
Insurance Services Risk Management Employee Benefits A WS&Co. Update February 2015 2015 Construction Workers Compensation and OSHA Update In this challenging construction environment the Woodruff-Sawyer
More informationSAFETY SIGNAGE PROCEDURE
Page 1 of 10 SAFETY SIGNAGE PROCEDURE 1.0 PURPOSE 1.1 To enable a reference to signage to meet legislative requirements and ensure in cases of emergency appropriate signage is visible. 2.0 SCOPE 2.1 This
More informationWARMER or COOKER/WARMER
WARMER or COOKER/WARMER Use & Care Manual FW-S500 WARMER 3138365 Conforms to: UL STD: 197 3138365 Conforms to: NSF STD.4 FW-S600 COOKER / WARMER Model Description Size Voltage Hz Wattage FW-S500 Electric
More informationLoss Control TIPS Technical Information Paper Series
Loss Control TIPS Technical Information Paper Series Innovative Safety and Health Solutions SM The Safety Audit: A Management Tool A major soft drink bottler, concerned about ergonomics and lifting hazards,
More informationexit routes and fire protection
exit routes and fire protection OSHA 11 Exit Routes and Fire Protection Osha 11 Exit Routes and Fire Protection Exit routes and fire protection Learning Objectives By the end of this lesson, students will
More informationDEVELOPING AN EMERGENCY ACTION PLAN
DEVELOPING AN EMERGENCY ACTION PLAN Injuries, sudden illnesses and other critical incidents do not often occur during school activities, nor do situations that require the help of Emergency Medical Services
More informationHow To Check If A Building Is Safe For A Disabled Person
GENERAL SAFETY-FIRE-SECURITY SURVEY CHECKLIST CAMPUS INSPECTION DATE BUILDING NAME INSPECTOR: ASSISTED BY: OUTSIDE/INSIDE BUILDING 1. ADA (Americans with Disabilities Act) Entry/Exit (If area is designed
More informationSample New Employee Safety Checklist
Sample New Employee Safety Checklist Supervisors must review the appropriate items from this list with each new employee. The Washington State Industrial Health and Safety Act (WAC 296-24-040) requires
More informationWelcome to the safe@work Retail Module.
Welcome to the safe@work Retail Module. Have you read the General Module, completed the test and printed your safe@work General Award of Attainment? The Retail Module should be done AFTER the General Module.
More informationWho is required to become licensed?
LICENSING GUIDELINES FAMILY CHILD CARE HOMES HUMAN SERVICES DEPARTMENT Community Partnerships Division Child Care Licensing and Enforcement Section TO REGULATE, ENFORCE AND IMPROVE THE QUALITY OF CHILD
More informationNational- Spencer Inc.
9-27-2010 National- Spencer Inc. 19.2V HEAVY DUTY GREASE GUN PRODUCT SPECIFICATION Charger Input Power 110 VAC Battery Output Power 19.2V Battery Capacity 1500 MAH Battery Pack Charge Time 1 Hour Maximum
More informationSafety in Offices and other General Areas
Safety in Offices and other General Areas 1. INTRODUCTION This document covers health and safety in offices and other 'general areas' including corridors, stairs, entrances, small kitchens and rest areas.
More informationEnviro Safety Products Resource Center. OSHA Checklist for General Industry
Enviro Safety Products Resource Center OSHA Checklist for General Industry The Occupational Safety and Health Administration (OSHA) require many standards to be met by businesses and industries. OSHA sets
More informationSAFETY TRAINING CLASSES & SERVICES LIST
SAFETY TRAINING CLASSES & SERVICES LIST CUSTOM CLASS ROOM TRAINING AVAILABLE, BACKED WITH ON-SITE SUPPORT SAFETY, TRAINING COURSES OFFERED BY OUR CERTIFIED ELITE RISK CONTROL TEAM: EM 385-1-1 (Military)
More informationSafety Inspection Guidelines for Department Safety Coordinators
Safety Inspection Guidelines for Department Safety Coordinators Safety inspections are an important part of any department s program in the location, identification, and correction of hazards. Department
More informationTemporary Worker Safety Checklist
Temporary Worker Safety Checklist The following checklists provide guidance for staffing agencies and employers that hire temporary workers regarding the steps each party should take to ensure it is meeting
More informationExample risk assessment for a motor vehicle mechanical repair workshop
Example risk assessment for a motor vehicle mechanical repair workshop Setting the scene The garage manager did the risk assessment. The business employed 12 mechanics, including two apprentices who carried
More informationSafety Inspection Checklist
Inspector(s): Building: Room Number (s): Department/Unit: Date Inspected: Supervisor: To customize your local inspection checklist, delete or add as required. Inspection Headings: 1. Administrative 8.
More informationwww.bradyid.com Food Safety Starts with Workplace Safety Workplace Safety Products For Food and Beverage Processing Facilities
www.bradyid.com Food Safety Starts with Workplace Safety Workplace Safety Products For Food and Beverage Processing Facilities FOOD SAFETY: The foundation of a safe and profitable food processing plant
More informationDepartment: Manager: Safety Coordinator: Date:
SAFETY and staff, regardless of hiring status or job position 1 1. Can staff name their department safety coordinator? 2. Is the Department Safety Binder current? 3. Do slip/trip hazards exist? 4. How
More informationOccupational First Aid
Occupational First Aid Introduction This section seeks to give practical guidance to employers on complying with the Occupational First Aid Regulations, which are part of the Safety, Health and Welfare
More informationINDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE SAFETY BULLETIN #23
INDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE SAFETY BULLETIN #23 GUIDELINES FOR WORKING WITH PORTABLE POWER DISTRIBUTION SYSTEMS AND OTHER ELECTRICAL EQUIPMENT "ADDENDUM C" WORKING WITH 480 VOLT SYSTEMS
More information