SERIES. Stainless Steel Ball Valve with Mounting Pad 1/4-1 A-14

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SERIES. Stainless Steel Ball Valve with Mounting Pad 1/4-1 A-14"

Transcription

1 A SERIES Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland Stainless Steel lever and nut STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball A Stainless Steel 5 Seat (2) RPTFE 6 Retainer A351-CF8M SS or A SS 7 Gland nut A Stainless Steel 8 Stem A Stainless Steel 9 Lever nut 18-8 Stainless Steel 10 Body seal PTFE 11 Body A351-CF8M Stainless Steel Fire safe to API 607 (requires -24 suffix) Meets NACE MR0175 (2000) & MR0103 (2012) CSA CGA 3.16-M88 (Requires GS suffix) NSF/ANSI 61 Section 8, Annex G NSF-372, Drinking Water System Components - Lead Content OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -P -01- BSPP (Parallel) Thread Connection 1/4 to 3 -T -01- BSPT (Tapered) Thread Connection 1/4 to Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing, PTFE body seal, RPTFE bearing (Fire Safe API 607, 6th edition, ISO 10497:2010) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 -GS CSA CGA 3.16 All PRODUCT NUMBER SIZE A B C D E F G H J K L M N WT A 1/ A 3/ A 1/ A 3/ A * LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law ANSI 3rd party approved and listed. REV. 11APR16 FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-14, GRAPH NO. 14

2 SERIES Stainless Steel Ball Valve with Mounting Pad Female NPT Thread, 1500 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland Stainless Steel lever and nut Fire safe to API 607 (requires -24 suffix) Meets NACE MR0175 (2000) & MR0103 (2012) CSA CGA 3.16-M88 (Requires GS suffix) NSF/ANSI 61 Section 8, Annex G NSF-372, Drinking Water System Components - Lead Content STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball A Stainless Steel 5 Seat (2) RPTFE 6 Retainer A351-CF8M Stainless Steel 7 Gland nut A Stainless Steel 8 Stem A Stainless Steel 9 Lever nut 18-8 Stainless Steel 10 Body seal PTFE 11 Body A351-CF8M Stainless Steel OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -P -01- BSPP (Parallel) Thread Connection 1/4 to 3 -T -01- BSPT (Tapered) Thread Connection 1/4 to Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing, PTFE body seal, RPTFE bearing (Fire Safe API 607, 6th edition, ISO 10497:2010) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 -GS CSA CGA 3.16 All PRODUCT NUMBER SIZE A B C D E F G H J K L M WT * LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law ANSI 3rd party approved and listed. FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-13, GRAPH NO. 12 REV. 11APR16 Copyright 2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA A-15

3 SERIES Stainless Steel Ball Valve Female NPT Thread, 1000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Adjustable packing gland Stainless Steel lever and nut Fire safe to API 607 (requires -24 suffix) Meets NACE MR0175 (2000) & MR0103 (2012) CSA CGA 3.16-M88 (Requires GS suffix) NSF/ANSI 61 Section 8, Annex G NSF-372, Drinking Water System Components - Lead Content STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball A Stainless Steel 5 Seat (2) RPTFE 6 Retainer A351-CF8M Stainless Steel 7 Gland nut A Stainless Steel 8 Stem A Stainless Steel 9 Lever nut 18-8 Stainless Steel 10 Body seal PTFE 11 Body A351-CF8M Stainless Steel OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -02- Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing, PTFE body seal, RPTFE bearing (Fire Safe API 607, 6th edition, ISO 10497:2010) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 -GS CSA CGA 3.16 All * LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law ANSI 3rd party approved and listed. FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-12, GRAPH NO. 8 PRODUCT NUMBER SIZE A B C D E F G H J K L M WT A-16 REV. 11APR16

4 FLOW DATA For Apollo Ball Valves The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/ connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. FLOW OF LIQUID P Q = C V SpGr or P = (Q) 2 (SpGr) (Cv) 2 FLOW OF GAS ( P) (P2) Q = 1360 C V (SpGr) (T) or P = 5.4 x 10-7 (SpGr) (T) (Q) 2 (Cv) 2 (P2) Where: Q = ΔP = SpGr = Cv = flow in US gpm pressure drop (psig) specific gravity at flowing temperature valve constant Where: Q = flow in SCFH ΔP = pressure drop (psig) SpGr = specific gravity (based on air = 1.0) P 2 = outlet pressure psia (psig ) T = (temp. F + 460) Cv = valve constant CAUTION: The gas equation shown, is valid at very low pressure drop ratios. The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet pressure (P1) exceeds NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than Cv FACTORS FOR APOLLO VALVES VALVE SIZE (IN.) 1/4 3/8 1/2 3/ B-140 Series /200 Series /400 Series Series Series AR Series /200 Series /900 Series A-100 Series /400 Series Series Series AR Series F-100 Series FJ-100 Series FK-100 Series Series /400 Series Series J-100 Series J-AR Series K-100 Series K-AR Series K-100 Series AR Series C-100/200 Series D-140 Series continued on next page Copyright 2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA M-3

5 FLOW DATA For Apollo Ball Valves Cv FACTORS FOR APOLLO VALVES (continued from M-3) VALVE SIZE (IN.) 1/4 3/8 1/2 3/ D-640 Series G-UL Series W Series /200 Series Series Series /200 Series A/83B Series R-100/200 Series A/86B Series R-100/200 Series A-100 Series A-200 Series A-700 Series A-900 Series A-F00 Series B-100 Series J-100 Series J-200 Series J-700 Series J-900 Series K-100 Series K-200 Series K-700 Series K-900 Series A-100 Series A-200 Series A-700 Series A-900 Series A-F00 Series B-100 Series Series A-100 Series Series Series Series A-100/200 Series Series Series Series M-4

6 PRESSURE TEMPERATURE RATINGS 2000 CWP (CS) ASTM A216-WCB or A105 (GRAPH 13) 2000 CWP (SS) ASTM A351-CF8M (GRAPH 14) M-14

7 PRESSURE TEMPERATURE RATINGS 1500 CWP (CS) ASTM A216-WCB or ASTM A105 (GRAPH 11) 1500 CWP (SS) ASTM A351-CF8M (GRAPH 12) Copyright 2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA M-13

8 PRESSURE TEMPERATURE RATINGS 1000 CWP (CS) ASTM A216-WCB (GRAPH 7) 1000 CWP (SS) ASTM A351-CF8M (GRAPH 8) M-12

MADE IN THE USA BALL VA LV ES

MADE IN THE USA BALL VA LV ES MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE Valves, Automation & Controls SERIES 7 HIGH PERFORANCE FLANGED STANDARD PORT BALL VALVE Fully Compliant API 608 5th Edition 50 300 FOR REFINING, CHEICAL & PETROCHEICAL PROCESSING Added Features Enhanced

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

The Unique Accelabar Flow Meter

The Unique Accelabar Flow Meter The Unique Accelabar Flow Meter The Accelabar is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter.

More information

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

Engineering Information For PDC Butterfly Valves

Engineering Information For PDC Butterfly Valves Engineering Information For PDC Butterfly Valves Valve Sizing: Cv sizing is the most widely used method for valve sizing, today. By using the Cv method, the proper valve size can be accurately determined

More information

Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves

Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.

More information

needle valves Needle Valves Index At a Glance Series 5

needle valves Needle Valves Index At a Glance Series 5 Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

Multipurpose Ball Valves

Multipurpose Ball Valves www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low

More information

MR98 Series Backpressure Regulators, Relief and Differential Relief Valves

MR98 Series Backpressure Regulators, Relief and Differential Relief Valves MR98 Series Backpressure Regulators, Relief and Differential Relief Valves May 2016 P1753 Type MR98H P1757 TYPE MR98L Figure 1. Typical MR98 Series Backpressure Regulators, Relief and Differential Relief

More information

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2" 4" Stainless or Carbon Steel.

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2 4 Stainless or Carbon Steel. Features Bolted body construction Investment cast body actuator mounting pad Direct mount Blow-out proof stem 4-seat design Adjustable, live loaded packing Secondary stem seal O-ring /" - " Extra deep

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

P630 High Flow Gas Regulator

P630 High Flow Gas Regulator P630 High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide Range of Flow Capacities The P630 is a spring loaded, direct-operated

More information

Fisher 2100 Pneumatic and 2100E Electric Liquid Level Switches

Fisher 2100 Pneumatic and 2100E Electric Liquid Level Switches 2100 and 2100E Level Switches Product Bulletin Fisher 2100 Pneumatic and 2100E Electric Liquid Level Switches Fisher 2100 on-off pneumatic switch and 2100E electric switch sense (shown in figure 1) high

More information

Vogt Valves The Connection Bulletin for Forged Steel Flow Control Valves CB 15

Vogt Valves The Connection Bulletin for Forged Steel Flow Control Valves CB 15 The Connection Bulletin for Forged Steel Flow Control Valves CB 15 Flow Control Division Forged Steel Flow Control Valves GRADUATED DIAL AND INDICATOR FULLY GUIDED V-PORT THROTTLING DISC AND INTEGRAL HARD

More information

Pressure and Temperature Controls

Pressure and Temperature Controls Pressure and Controls Pressure Reducing Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air and liquid systems safely and efficiently. And assure uninterrupted

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose: PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409

Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409 Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam

More information

PLUMBING RE-SUBMITTAL 22 11 17

PLUMBING RE-SUBMITTAL 22 11 17 PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:

More information

B34 Series Regulator Commercial and Industrial Regulator

B34 Series Regulator Commercial and Industrial Regulator Gas B34 Series Regulator Commercial and Industrial Regulator Applications Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the

More information

excess flow control XVH Series Excess Flow Valve

excess flow control XVH Series Excess Flow Valve Excess Flow Valve Circle Seal Controls 2301 Wardlow Circle Corona, CA 92880 Phone (951) 270-6200 Fax (951) 270-6201 www.circlesealcontrols.com excess flow control Excess Flow Valves XVH Series Excess Flow

More information

MFP14, MFP14S and MFP14SS Automatic Pumps

MFP14, MFP14S and MFP14SS Automatic Pumps Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

needle valves Needle Valves Index At a Glance 1

needle valves Needle Valves Index At a Glance 1 Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

CONNECTION BULLETIN. Vogt Valves. Experience In Motion. Forged Steel Flow Control Valves. FCD VVABR /05 (Replaces CB-15)

CONNECTION BULLETIN. Vogt Valves. Experience In Motion. Forged Steel Flow Control Valves. FCD VVABR /05 (Replaces CB-15) CONNECTION BULLETIN ogt alves Forged Steel Flow Control alves FCD ABR1015-00 01/05 (Replaces CB-15) Experience In Motion ogt alves Forged Steel Flow Control alves FCD ABR1015-00 01/05 Forged Steel Flow

More information

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

Model 143-6 Residential Service Regulators. R-1303 Rev. 4

Model 143-6 Residential Service Regulators. R-1303 Rev. 4 Model 4-6 Residential Service Regulators R-0 Rev. 4 Model 4-6 Service Regulators equal outstanding performance, utility, and dependability with value. Best Buy, By Far The 4-6 Service Regulator The 4-6

More information

B34 Commercial & Industrial Regulator. Advanced Metering and Regulation Technology at Work.

B34 Commercial & Industrial Regulator. Advanced Metering and Regulation Technology at Work. IMAC Systems, Inc. 90 Main Street, PO Box 1605 Tullytown, PA 19007 Tel. 1-800-955-4GAS (215) 946-2200 Fax:(215) 943-2984 www.imacsystems.com B34 Commercial & Industrial Regulator Advanced Metering and

More information

Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)

Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer

More information

COMMERCIAL PRODUCTS CATALOG

COMMERCIAL PRODUCTS CATALOG COMMERCIAL PRODUCTS CATALOG For additional information, submittal sheets and manuals, visit www.apollovalves.com 1 A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries,

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

RA 2000 Thermostatic Radiator Valves

RA 2000 Thermostatic Radiator Valves RA 2000 Thermostatic Radiator Valves Application: regulate the flow of hot water or low pressure steam through free-standing radiators, baseboards, or convectors in hot water and two-pipe steam systems.

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control

HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model

More information

Every component precisely matched

Every component precisely matched Series DKV Every component precisely matched Multi-functional positioner The ARCAPRO digital positioner is a multi-functional interface with the controller or process control system and operates as standard

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.korlokusa.com Kor-Lok USA Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54

More information

Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005

Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005 Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the

More information

BULLETIN AUGUST DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES

BULLETIN AUGUST DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES BULLETIN 45.00-1 AUGUST 2012 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in

More information

Characterized Port -CP Ball Valves

Characterized Port -CP Ball Valves Characterized Port Two Way and Three Way Description: The Characterized Port Two-way are coupled with our actuators to provide equal percentage flow control. The Characterized Port Three-way are coupled

More information

ball valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves

ball valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves

More information

Technical information

Technical information Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and

More information

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following:

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following: Refrigerant Piping The following recommendations are given for ammonia piping. Local codes or ordinances governing ammonia mains should also be followed, in addition to the recommendations here. Recommended

More information

REGULATORS 175/153 Series

REGULATORS 175/153 Series 175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed

More information

KF Needle & Gauge Valves

KF Needle & Gauge Valves KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low

More information

61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve

61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve 61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed

More information

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control

More information

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1 Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

VAD. Variable Area Desuperheaters

VAD. Variable Area Desuperheaters Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated

More information

Low Pressure Transfer Pumps for CO 2

Low Pressure Transfer Pumps for CO 2 Low Pressure Transfer Pumps for CO 2 MC3SS bareshaft MC3SS on base plus motor The liquid CO 2 transfer pumps manufactured by Smith Precision Products of California are designed for moving large quantities

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators 1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk

More information

Model DE-3 Air Release Head

Model DE-3 Air Release Head SPECIFICATIONS MEASUREMENT SOLUTIONS Model Air Release Head Bulletin SS03037 Issue/Rev. 0.2 (10/15) We put you first. And keep you ahead. SMITH METER AIR ELIMINATOR The Smith Meter Model Air Release Heads

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA 1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With

More information

Block and Bleed Gauge Valves M25 and M251

Block and Bleed Gauge Valves M25 and M251 Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F0/F HYGIENIC BUTTERFLY VALVES WELD/CLAMP/THREAD END CONNECTIONS FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS

More information

1805 Series Relief Valves

1805 Series Relief Valves October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

HL Series - Commercial Heaters Tankless Water Heating Solutions

HL Series - Commercial Heaters Tankless Water Heating Solutions HL Series - Commercial Heaters 5-18 kw (17,000-61,400 BTUs) Low flow activation options at.15 and.25 GPM (0.6 and 0.9 L-Min) Certified Lead-Free Design Variable Temp Heat Exchanger Pressure Drop Advantage

More information

Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to 10,000 psi (70,000 kpa).

Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to 10,000 psi (70,000 kpa). Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to. Marsh Needle Valves are used in oil and gas production, chemical processing,

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

2-42 Flanged Vacuum Breaker. Operation, Maintenance and Installation Manual

2-42 Flanged Vacuum Breaker. Operation, Maintenance and Installation Manual Manual No. VB-OM1-1 2-42 Flanged Vacuum Breaker Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2 DRAWING SS-1381...

More information

Table of Contents. Valve Selection Scope of Design

Table of Contents. Valve Selection Scope of Design Scope of Design CONSOLIDATED Maxiflow high pressure safety valves are premium products that are installed on a majority of power generating stations worldwide to protect boilers from overpressure conditions.

More information

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?

More information

SPECIFICATION DIVISION 22 SECTION DESCRIPTION DIVISION 22 PLUMBING SECTION 220519 - THERMOMETERS, PRESSURE GAUGES, AND ACCESSORIES

SPECIFICATION DIVISION 22 SECTION DESCRIPTION DIVISION 22 PLUMBING SECTION 220519 - THERMOMETERS, PRESSURE GAUGES, AND ACCESSORIES ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION

More information

KEYSTONE. Keystone MRP and MRA Pneumatic Actuators

KEYSTONE. Keystone MRP and MRA Pneumatic Actuators KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly

More information

Installation and Operating Instructions Installation Instructions for SS EPE-316L Series

Installation and Operating Instructions Installation Instructions for SS EPE-316L Series INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Type Y692 Gas Blanketing Regulator System

Type Y692 Gas Blanketing Regulator System Bulletin 7:Y69 Type Y69 Gas Blanketing Regulator System November 14 W930-1 Figure 1. Type Y69 Low-Pressure Gas Blanketing Regulator Introduction An Accu-Pressure Gas Blanketing Regulator System reduces

More information

PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM

PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE

More information

45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020

45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020 45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, & other High Pressure Gases High Pressure Cryogenics Flammable Liquids & Gases

More information

MK608UBS Series. Pressure Reducing MK608UBS Direct Operated Pressure Relief Valve

MK608UBS Series. Pressure Reducing MK608UBS Direct Operated Pressure Relief Valve MK608UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK608UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure

More information

Float and Thermostatic Traps Series H, C and X

Float and Thermostatic Traps Series H, C and X Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

NEW Edge Series Products: OUTFITS and REGULATORS

NEW Edge Series Products: OUTFITS and REGULATORS NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

Baumann 81000 Mikroseal Control Valve

Baumann 81000 Mikroseal Control Valve Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where

More information

Air Eliminators and Combination Air Eliminators Strainers

Air Eliminators and Combination Air Eliminators Strainers Description Air Eliminators and Combination Air Eliminator Strainers are designed to provide separation, elimination and prevention of air in piping systems for a variety of installations and conditions.

More information

Worcester Controls Actuator Sizing Manual. For Worcester Controls Valves. FCD WCENSS0001-01 (Part ASM-16) AN ISO 9001 REGISTERED COMPANY

Worcester Controls Actuator Sizing Manual. For Worcester Controls Valves. FCD WCENSS0001-01 (Part ASM-16) AN ISO 9001 REGISTERED COMPANY FCD WCENSS1-1 (Part ASM-16) AN ISO 91 REGISTERED COMPANY Table of Contents Page Definition of Valve Torque.................... 2 Determination of Valve Torque Actuator Selection..........................

More information