System Dia. M (mm) Dia. M (in.) Dia. N (mm) Dia. N (in.)

Transcription

1 Spec M - uman-machine nterface Mounting Options COMPACT Pendant Arm Series 4 System Mounting Options COMPACT Pendant Arm Series 4 System COMPACT Pendant Arm Series 4 System, Type 2 SPCCATONS eavy cast steel and cast aluminum couplings and heavy-wall steel tubing provide excellent structural strength ach system includes multiple coupling types and three standard tube lengths (.5 m, m and 2 m) which combine to form numerous configurations Steel tubing has 5-mm (0.2-inch) wall thickness. Tubing is coldformed, welded square and rectangular steel tubes. Tubing provides structural integrity and acts as a conduit for equipment wiring Removable access plates (provided with set-up joint, elbow and elbow couplings) simplify cable installation inside tubing eavy-duty bearings in all movable joints for convenient, smooth operation and enhanced durability to withstand stresses of repeated use eep tube fittings in all couplings Adjustable setscrews allow for accurate alignment of supporting tubes Optional pedestal base available Gasket is oil-resistant neoprene NUSTRY STANARS NMA/MAC Type 2 C 60529, P55 N APPLCATON A heftier version of the Series 2 Pendant Arm, the COMPACT Series 4 System Pendant Arms are equally flexible in allowing operators to move controls into and out of position, but they can accommodate heavier weight loads. At 3.3 ft. ( m), the Series 4 System holds 337 lb. (53.2 kg). System is recommended for use with CONCPT M and PROLN Sloped ront nclosures. NS Couplings are RAL 7035 light-gray polyester powder paint. Access plates and tubing are light-gray. Bellows are black. Standard Coupling or Standard lbow Coupling System ia. M (mm) ia. M (in.) ia. N (mm) ia. N (in.) imensions for Cutouts System 50 (mm) 50 (in.) 60 (mm) 60 (in.) (mm) (in.) Set-Up oint Ø MAX Ø G Wall oint or Cable Wall oint Ø MAX Ø G Wall lange or Base Bracket Ø MAX Ø G lange Coupling or lange lbow Coupling Ø MAX Ø G Angle Adapter Plate Ø MAX Ø G M - uman-machine nterface SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

2 Mounting Options COMPACT Pendant Arm Series 4 System System Load Capacity The Series 4 Pendant Arm load graph is the result of load capacity tests. Please contact offman for specific application information. QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 2

3 Mounting Options COMPACT Pendant Arm Series 4 System Tubes Square and rectangular tubes are cold-formed, hollow, welded steel with 5-mm wall thickness. inish is RAL 7035 light-gray polyester powder paint. Tubing provides structural integrity and acts as a conduit for equipment wiring. Available in 500-, 000- and 2000-mm lengths. All pendant arm connections are sized to fit appropriate tube sizes. Size CCS8T5 x 3.0 x 3.0 CCS8T0 x 3.0 x 3.0 CCS8T20 x 3.0 x 3.0 Actual Length xternal imensions 3.0 sq sq sq. 3.5 Wall Thickness imensions nside Cross Section (sq. cm) nside Cross Section (sq. in.) Set-Up oint Cast iron finished with RAL 7035 light-gray polyester powder paint. Mounts equipment to horizontal surface. Permits pendant arm to be rotated or turned 306 degrees. Pivot bearing is maintenance-free. Setscrews, removable access plate and gasket are included. Mounting hardware is not provided. L each side CCS8SLG ia. G K each side 3.5 M each side O ia. Q M - uman-machine nterface SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

4 Mounting Options COMPACT Pendant Arm Series 4 System Wall oint Welded steel plate construction finished with RAL 7035 light-gray polyester powder paint. Mounts equipment to vertical surface. Swivel range is approximately degrees. ncludes bellows with zipper, seals and setscrews. Adjustable tension at pivot point. Rotational limiter is optional. Mounting hardware not provided. CCS8WRLG G 3.5 each side ia. K L M Cable Wall oint Welded steel plate construction finished with RAL 7035 light-gray polyester powder paint. Mounts equipment to vertical surface. Provides cable access to inside of pendant system from above or below. Swivel range approximately degrees. ncludes bellows with zipper, seal and setscrews. Adjustable tension at pivot point. Rotation limiter is optional. Mounting hardware not provided. CCS8WCRLG G 3.5 each side ia. K L M N P Wall lange Wall lange expands mounting options to include wall-mount as well as horizontal tube applications. Cast iron construction finished with RAL 7035 light-gray polyester powder paint. Setscrews, gasket and seals are included. Mounting hardware not provided. L each side CCS8WLG G each side ia. M QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 4

5 Mounting Options COMPACT Pendant Arm Series 4 System ntermediate oint Welded steel plate construction finished with RAL 7035 light-gray polyester powder paint. Mounts to pendant tube. Swivel range is approximately degrees. Setscrews and bellows with zipper are included. Rotational limiter is optional. Catalog Number System CCS8RLG CCS4RLG / each side 3.5 x x G lbow Cast aluminum with RAL 7035 lightgray polyester powder paint finish. Removable access plate. Setscrews and gaskets are included. Catalog Number System L CCS8LLG W G each side M - uman-machine nterface SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

6 Mounting Options COMPACT Pendant Arm Series 4 System lange Coupling lange Coupling mounts to enclosure, enabling enclosure to be rotated 300 degrees. nclosure can be locked in position. Safety stop and maintenance-free bearing. inish is RAL 7035 light-gray polyester powder paint. ncludes installation instructions, setscrews, gaskets and mounting hardware. Catalog Number System L each side CCS8CLG each side ia G each side lange lbow Coupling Coupling mounts to enclosure, enabling enclosure to be rotated 300 degrees. nclosure can be locked in position. Removable access plates. inish is RAL 7035 light-gray polyester powder paint. Setscrews, gasket and mounting hardware are included. L each side CCS8CLG each side G ia each side 3.5 K QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 6

7 Mounting Options COMPACT Pendant Arm Series 4 System Rotation Limiter Accessory for use with Wall oint, Cable Wall oint and ntermediate oint. Limits the rotation of these joints which normally rotate degrees. Rotation Limiter provides stops in 5-degree increments. The limiter is a heavy-duty steel disk that attaches to the pivot point on each joint. Moveable stop pins provide adjustment. Weight ia. (mm) ia. (in.) (lb.) CCS84RL Swivel Tilt Mounts between suspension arm and M enclosure to provide both swivel and tilt options for machine operator. Cast aluminum assembly finished with RAL 7035 light-gray polyester powder paint. Center opening for control cables. Tilt knob allows infinite tilt adjustment from horizontal to 30 degrees. Swivel allows 300-degree maximum rotation. Setscrews, seals and enclosure mounting screws are included. Maximum load for overhead applications is 0 lb. (50 kg). Catalog Number System G (mm) each side G (in.) each side Weight (lb.) CCS8STBLG Not recommended to be used in combination with base with cutout for sloped-front PBSK66 or PBSK66SS. Angle Adapter Plate Cast aluminum finished with RAL 7035 light-gray polyester powder paint. Provides connection between enclosure and flange coupling. ncludes gasket and installation hardware. Angle G CCS568AA5LG 50, 60, CCS568AA30LG 50, 60, or CCS4AA5LG, system /40, 5-degree angle, 3.6 lb., see Angle Adapter Plate System /40 dimension drawing for dimension information K M - uman-machine nterface SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

8 Mounting Options COMPACT Pendant Arm Series 4 System Base Bracket or vertical-tube mounting or to mount tube to floor. Bracket is cast iron finished with RAL 7035 light-gray polyester powder paint. Setscrews, gasket and seals are included. Mounting hardware not provided. L each side CCS8BBLG CCS4BBLG /40 75 x x G each side 3.5 x x ia. M Pedestal Base Cast aluminum one-piece heavyduty construction with RAL 7035 light-gray polyester powder paint finish. ncludes all hardware for attaching tubes. Optional casters or levelers can be installed on pedestal base. Levelers and fixed or swivel casters are available in pairs (must order two pair). Catalog Number System (mm) each side (in.) each side Weight (lb.) CCS8PBLG x 3.5 x CCS4PBLG /40 x x Casters and Levelers for Pedestal Base Casters or levelers can be installed under the cast aluminum pedestal base. Casters raise pedestal base 0.59 in. (5 mm). our casters and four levelers or two casters and two levelers can be installed. Catalog Number escription Qty CCSPBW ixed Casters CCSPBWS Swivel Casters QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 8

9 Mounting Options COMPACT Pendant Arm Series 4 System COMPACT Pendant Arm Series 4 Configurations COMPACT PNANT ARM SRS 4 CONGURATONS A Set-up joint ccs8sjlg lbow ccs8ellg lange coupling or Swivel tilt ccs8fclg ccs8stblg B AN C Wall joint or Cable wall joint ccs8wjrlg ccs8wjcrlg lbow ccs8ellg lange coupling or Swivel tilt ccs8fclg ccs8stblg AN Wall flange ccs8wflg lbow ccs8ellg lange coupling or Swivel tilt ccs8fclg ccs8stblg 9 M - uman-machine nterface SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

10 Mounting Options COMPACT Pendant Arm Series 4 System Set-up joint ccs8sjlg lange elbow coupling ccs8feclg G AN Wall joint or Cable wall joint ccs8wjrlg ccs8wjcrlg lange elbow coupling ccs8feclg Wall joint or Cable wall joint ccs8wjrlg ccs8wjcrlg lbow ccs8ellg Swivel tilt a ccs8stblg a Maximum load for overhead applications is 0 lb. (50 kg) including enclosure. Note to the Specifier:. Select pendant system sizing using the COMPACT Series 4 load capacity chart. 2. Tube catalog numbers are not included in configuration tables. QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 0

11 Mounting Options COMPACT Pendant Arm Series 4 System Set-up joint ccs8sjlg ntermediate joint ccs8ijrlg lbow ccs8ellg lange coupling or Swivel tilt ccs8fclg ccs8stblg K AN L Wall joint or Cable wall joint ccs8wjrlg ccs8wjcrlg ntermediate joint ccs8ijrlg lbow ccs8ellg lange coupling or Swivel tilt a ccs8fclg ccs8stblg a Maximum load for overhead applications is 0 lb. (50 kg) including enclosure. M Wall flange ccs8wflg lbow ccs8ellg lange coupling ccs8fclg 3 M -- uman-machine UMAN-MACN nterface NTRAC SUBCT TO CANG WTOUT NOTC QUPMNT PROTCTON SOLUTONS

12 Mounting Options COMPACT Pendant Arm Series 4 System N Base bracket ccs8bblg lange coupling ccs8fclg Angle adapter 5º or Angle adapter 30º ccs568aa5lg ccs568aa30lg O Set-up joint ccs8sjlg ntermediate joint ccs8ijrlg lange elbow coupling ccs8feclg P AN Q Wall joint or Cable wall joint ccs8wjrlg ccs8wjcrlg ntermediate joint ccs8ijrlg lange elbow coupling ccs8fclg Note to the Specifier:. Select pendant system sizing using the COMPACT Series 4 load capacity chart. 2. Tube catalog numbers are not included in configuration tables. QUPMNT PROTCTON SOLUTONS P AX OMANONLN.COM M - uman-machine nterface 2