30" MIN. DRAWING NO. REV APP'D DATE TYPICAL 3/4" THRU 2" WATER SERVICE INSTALLATION W-1 NO. C67084 C I VI L

Transcription

1 9" 30" MIN. 45 REV APP'D DATE PRESSI ONAL TYPICAL 3/4" THRU 2" WATER SERVICE INSTALLATION W-1

2 PRESSI ONAL 3"-6" WATER SERVICE W-2

3 PRESSIONAL 3"-6" WATER SERVICE W-2A

4 PRESSIONAL STANDARD PIPE ZONE AND TRENCH BACKFILL W-3

5 PRESSI ONAL CONCRETE THRUST BLOCKS W-4

6 PRESSIONAL C I VI L SERVICE OUTLET SADDLE W-5

7 PRESSIONAL 2" BLOW-F ASSEMBLY W-6

8 PRESSIONAL C I VI L 4" BLOW-F ASSEMBLY W-7

9 PRESSIONAL C I VI L 4" BLOW-F ASSEMBLY W-7

10 2A ALTERNATE ASSEMBLY NOTES: 1. REFER TO SECTION THE SPECIFICATION 2. SET TOP METER BOX FLUSH WITH SIDEWALK, CURB OR FINISHED GRADE 3. LOCATE METER BOX AS SHOWN ON WS INSTALL WARNING/IDENTIFICATION TAPE AS SHOWN ON WP FOR BLOW-F INSTALLATION AT END MAIN SEE WB BLOW-F ASSEMBLIES INSTALLED FOR THE USE RECYCLED WATER SHALL BE IDENTIFIED AS DESCRIBED IN SECTION THE SPECIFICATION 7. CONNECTIONS TO STEEL MAINS SHALL BE IN ACCORDANCE WITH SECTION AND AS SHOWN ON WB BEND SHALL BE USED FOR MAINS UP TO 30". 90 BEND SHALL BE USED FOR MAINS IN EXCESS 30" AS DIRECTED BY THE DISTRICT 9. ALTERNATE ASSEMBLY IF DIRECTED BY THE DISTRICT. IF USED, CAM & GROOVE FITTING ADAPTER SHALL BE DRILLED AND TAPPED FITTED WITH 1/4" PRESSURE RELEASE PET COCK PRIOR TO INSTALLATION 10. MATERIALS SHALL BE SELECTED FROM THE APPROVED MATERIALS LIST ITEM SIZE AND DESCRIPTION ITEM SIZE AND DESCRIPTION 1 POLYMER METER BOX WITH LID 17"x 30" SEE NOTE 3 6 6" FLG DI PIPE x REQUIRED LENGTH (2 SPOOLS MAX) 2 7 CONCRETE THRUST BLOCK SEE WT-01 2" FIP x MIP BRASS LOCKABLE BALL VALVE WITH 2" THREADED 8 6" FLG x MJ/PO 90 BEND BRASS PLUG 9 6" C-900 PVC PIPE 2A 2" CAM & GROOVE FITTING x MIPT ADAPTER WITH LOCKING 10 8" GATE WELL WITH LID SEE WV-01 OR WV-02 DUST CAP AND 6" FLG COMPANION x FIPT SEE NOTE 8 (ALTERNATE ASSEMBLY) 11 6" FLG x MJ/PO/FLG RWGV 12 6" FLG x MJ/PO ADAPTER (IF REQUIRED) 3 TRACER WIRE (AS REQUIRED), SEE WP-01) 13 WATER MAIN 4 6" FLANGED COMPANION x FIPT 14 SIZE x 6", MJ/PO/FLG x FLG TEE 5 3/8" ROCK 4" TO 6" DEEP 15 6" FLG'D 45 BEND, SEE NOTE " x 24" FLG DI SPOOL REV APP'D DATE PRESSIONAL C I VI L 6" BLOW-F ASSEMBLY W-7A

11 PRESSI ONAL 4" BLOW-F ASSEMBLY W-8

12 PRESSIONAL C I VI L 6" FIRE HYDRANT ASSEMBLY W-9

13 PRESSIONAL CI VI L 6" FIRE HYDRANT ASSEMBLY W-10

14 PIPE SIZE: <6" 2" 6" - 14" 2" 16" -20" 4" >20" 6" AIR RELEASE/ VACUUM RELEASE SIZE REV APP'D DATE PRESSI ONAL 1" AND 2" AUTOMATIC AIR RELEASE AND VACUUM RELIEF VALVE W-11

15 PRESSI ONAL 4" AND 6" AUTOMATIC AIR RELEASE AND VACUUM RELIEF VALVE W-12

16 PRESSIONAL STANDARD GUARD POST INSTALLATION W-13

17 PRESSI ONAL STANDARD CUTF WALL W-15

18 PRESSIONAL C I VI L APPURTENANCE WALL W-16

19 PRESSIONAL C I VI L STANDARD CUL-DE-SAC WATER LATERALS W-17

20 PRESSIONAL VALVE WELL FRAME W-19

21 PRESSI ONAL VALVE WELL COVER W-20

22 PRESSI ONAL C I VI L TRENCH RESURFACING TYPES A & B W-21

23 PRESSI ONAL 3" FIRE SERVICE INSTALLATION W-22

24 PRESSIONAL 4" AND LARGER FIRE SERVICE INSTALLATION W-22A

25 PRESSIONAL C I VI L 4" AND LARGER FIRE SERVICE INSTALLATION W-22B

26 PRESSI ONAL TYPICAL THREE VALVE TEE W-23

27 PRESSIONAL 3/4" WATER SAMPLE CONNECTION W-25