Optimized customer solutions. Flender rail car drives gearboxes, couplings and services. siemens.com/railgearunits. Answers for industry.

Size: px

Start display at page:

Download "Optimized customer solutions. Flender rail car drives gearboxes, couplings and services. siemens.com/railgearunits. Answers for industry."

Willis Long
7 years ago
Views:

1 Optimized customer solutions Flender rail car drives gearboxes, s and services siemens.com/railgearunits Answers for industry.

2 Berlin underground railway equipped with FLENDER ASZA 430 X 7.33 helical s and GKG 445. Siemens supplies complete drive solutions for different concepts and all vehicle types. Every axle drive is different. Which is why s and s are adapted to meet new operating conditions and customer requirements on the basis of extensive standardization. So you get proven, state-ofthe-art technology. 2

3 High-speed train with FLENDER ASEF 380 X 2.79 helical gear axle drives and ZBG 238 gear. Gear units and s The everyday operation of railway vehicles puts your drives to a severe test. Weight- and strength-optimized housings of high-grade nodular cast iron and the casehardened and ground teeth of our s guarantee quality which enables us to create links in the long term, not only between A and B. Likewise, the s connecting the to motor and axle must meet a lot of requirements. For this reason, not only must the individual elements be up to the latest standard of technology, in particular production must be of the very highest precision. Only then will adaptation to the most varied operating conditions and any replacement of individual component parts be possible. Types Siemens differentiates in its production range between transverse and longitudinal drives. Both types of drive may be designed either fully suspended, partly suspended or mounted directly on the axle. The different demands made of these drives call for component parts which are optimally suited to the relevant application. Axle loads of up to 32 t, motor speeds of over 6,000 rpm and travelling speeds of over 300 km/h are just some of the important parameters. Everything from a single provider The optimum match of and, the high level of standardization of our products and the special flexibility in the adaptation to different conditions make us the special systems provider for all drive requirements. So we offer solutions for the most varied concepts and all vehicle types. The range includes Drive solutions for different concepts and all vehicle types Most varied configurations to meet any requirement: single- and multi-stage helical, bevel and bevel-helical gear axle drives Fully spring-suspended, partially spring-suspended, axle-mounted s Special versions of reversing s and combined types Gear s, multiple-steel-disc s and universal joint axle s 3

4 Our service program for rail s and rail s puts the operation of your vehicles on a sound basis. Service In every transport undertaking, vehicle availability is the first priority. Consideration of the average service lives in passenger transport operations worldwide shows that there is a great need for optimization here. As a Siemens customer, you reach your destination unhurried and unflustered. This is because our maintenance management assures you of efficient, condition-focused maintenance and repair of all drive systems, while the substitution service is at your disposal at all times with spare s and spare parts for FLENDER products and many other makes. Thanks to condition monitoring, we can monitor the condition of individual s, bogies or even entire vehicles anywhere in the world, and our special service assures you of individual additional services to safeguard the availability of your vehicles. Whatever happens, with our service you are always on the safe side. Your advantages Availability We lengthen the useful life of your drives. We also work with you to develop forward-looking service concepts. Fail-safeness Safeguarding your railway operation is our first priority. Condition monitoring and condition-focused maintenance enable us to ensure that failures are minimized. Boosting performance Reengineering and retrofitting significantly boost the performance and efficiency of your drive systems. Reliability Whenever you need us, we are in the right place worldwide. We are at your disposal via our hotline twenty-four hours a day, seven days a week. Know-how transfer Train your staff in early damage identification. Our innovative training concept ensures practical know-how transfer. 4

5 AKEA bevel-helical Low-floor tram drive 100%-LF. This integrated drive is bolted directly to the axle via a FLENDER and fastened flexibly to the bogie as a unit with the flange-mounted motor. The Klingelnberg cyclopalloid-toothed bevel gear set and the helical gear stage are ground for optimum load and noise. Low-floor trams City railways Underground railways Rail coaches, locomotive High-speed train Buses Gear unit types * helical gear units, 1- and 2-stage unit* unit* Couplings Membrane, rubberjoint Gear, Gear, Gear, Gear, Axle load, t Bogie wheel, m , ,010 Slip torque, Nm 6,000 14,500 10,000 22,000 15,000 18,000 14,000 60,000 24,000 30,000 Max. service speed, km/h Motor/engine output, kw Max. motor/ engine speed, rpm x 85 6,400 5,000 4,500 4,500 6,000 10,000 References Berlin, Bilbao, Cologne, Croydon, Dessau, Geneva, Halle, Leipzig, London, Rotterdam, Sacramento, Sydney, London, Paris, Singapore, Oslo, Manila, Dublin Nuremberg, Madrid, Rome, Barcelona, Oslo, Brussels, Berlin, Paris, Warsaw, Athens, Milan Cologne, Aachen, Dublin, Israel, New Jersey, Great Britain, Austria, Switzerland China, Belgium/ Netherlands, Russia, Germany San Diego, Tokyo, Nuremberg, Hainichen The FLENDER range includes the following types: membrane s, cardan s, s, rubber-link s, gear s and special solutions. 5

6 Further information on drives: Further information on s: Further information on services: For more information and technical descriptions, click on the Support navigation point on our Website. Siemens AG Industry Sector Mechanical Drives Alfred-Flender-Straße BOCHOLT GERMANY Subject to change without prior notice 08/12 Order No.: E20001-A340-P900-X-7600 DISPO SCHÖ/41610 GD.MD.AP.BAHN WS Printed in Germany Siemens AG 2012 The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.

THE POWER OF TRANSMISSION GEARBOXES

THE POWER OF TRANSMISSION GEARBOXES For more than 60 years IGW have been the specialists in manufacturing bespoke gears and gearboxes for some of the most prestigious engineering projects around the world.the biggest names in the most demanding