3M Fiber Distribution Unit Rack Mount 8423 and Optional 3M Port Expander Kit 8423-EXP

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "3M Fiber Distribution Unit Rack Mount 8423 and Optional 3M Port Expander Kit 8423-EXP"

Transcription

1 3M Fiber Distribution Unit Rack Mount 8423 and Optional 3M Port Expander Kit 8423-EXP Instructions November

2 Table of Contents 1.0 Description Kit Contents Assembly Mounting the Patch Panel Field Cable Preparation and Placing Fiber Layout Splicing Using the 3M Fiber Splice Organizer Tray 2524-SR Pigtail Layout and Splicing Fiber Layout

3 1.0 Description 1.1 The 3M Fiber Distribution Unit Rack Mount 8423 is a patch panel designed to provide termination of up to 24 simplex and up to 48 duplex optical fibers in one unit of rack space. The panel is mounted on glides that permit drawer-like movement of the panel within the rack. The glides have built-in adjustable stops that allow the installer to select flush or mid-mounting of the panel in its returned position. The units offer networking and fiber distribution from the vault or wiring closet to the user s terminal equipment. The patch panel s splice or slack storage area is used for the riser or outside plant cables entering the building, pigtails and pigtail splices. This area is enclosed by a detachable cover. 3M Fiber Distribution Unit Rack Mount 8423 and optional 3M Port Expander Kit 8423 EXP The units are sold empty allowing the installer to customize it using separately purchased adapter plates. Adapter plates are available with most common adapter styles including ST, SC, LC and FC in both multimode and singlemode, simplex and duplex. Preconfigured units including pigtails and splice trays are also available. 3M also provides field mount connectors of all types and cable assemblies to complete the interconnect installation. With the addition of the 3M Port Expander Kit 8423 EXP, the unit can be expanded at any time to a two-rack unit size for 48 simplex port or high density 96 duplex port capacity. 3M Port Expander Kit 8423 EXP Cable clamp...1 Cable entry grommet...1 Machine screw, 8 x 32 x 3/8"...1 Nut, kep 8 x Large cable retention clips...4 Small cable retention clips...4 Plunger Kit Contents 3M Fiber Distribution Unit Rack Mount 8423 Housing unit with cover and glides...1 Cable clamp...1 Central strength member clamp...1 Machine screw 8 x 32 x 3/8"...1 Nut, kep 8 x Fiber retention clips...9 Jumper organizing clips...4 Cable entry grommet...1 Rack mounting screws #10 x 32 x 3/4"...4 Spiral tubing...1 Fiber assignment label...2 Label, danger, laser light...1 Fiber Retention Clips (9) Jumper Organizing Clips (4) Cable Clamp Cable Entry Grommet Spiral Tubing Nut, Machine Screw Fiber Assignment Label Rack Mounting Screws Central Strength Member Clamp 3

4 2.1 Suggested Tools and Supplies (Not Furnished) Phillips screwdriver Cable cutter to cut cable Stripping tool to strip loose tube around fibers Large cutting pliers for central strength member Lint free wipes to apply alcohol Reagent grade isopropyl alcohol to clean connectors and couplings Solvent and rags to clean waterproof gel from fibers and tubes Microscope to view end of fiber when terminating connectors directly on the fiber Splicing kits and supplies Cable sheath slitting tool Source of dry air (can be obtained in pressurized cans) Cable ties to secure field cables and cable assemblies 3.0 Assembly 2.2 Optional Parts 3M Fiber Splice Organizer Tray 2522 or 2524-SR 3M 23" Rack Mounting Bracket Kit 8423-BKT 3M Fibrlok Splice Inserts 2521-FL 3M Fiber Transition Tubing M Fibrlok Splice Inserts 2521-F 3M Port Expander Kit 8423-EXP 3M Filled Service Wire Cleaning Kit Attach the cable clamp: Remove the cover by releasing the plungers and sliding the cover forward. 4

5 Note: 3M Fiber Distribution Unit Rack Mount 8423 and optional 3M Port Expander Kit 8423 EXP - Stack the expander on top of the 8423 unit and secure with supplied plastic fasteners Slide the cable clamp through the tab to the left or right of the cable entry port depending on the direction of cable entry. Do not engage the clamp s threads at this time. 3.2 Attach the strength member clamp: Use the nut and bolt to attach the strength member clamp to the patch panel at the hole opposite the cable clamp. For cables containing buffer tubes, the strength member clamp should be installed outside the panel For tight buffered cables, the clamp should be installed inside of the panel. Insert the bolt through the strength member clamp first. 5

6 3.3 Ready the splice chamber. Install the fiber clips as desired or according to company practice. 3.4 Sketches are provided as guides only. Before installing the fiber clips, consider all organizer trays or other devices that need to be accommodated. Direct Termination Pigtail Splicing Jumper Organizer Clips Glide Adjustment Screws 3M Fiber Splice Organizer Tray 2522 shown 3.5 Install Labels: Install one of the fiber assignment labels on the underside of the housing cover. Install the other fiber assignment label in a convenient location on the top of the cover. 3.6 Install the coupling plates or splitter modules: Pull the two plungers on the coupling plates or splitter modules to the outward position. Fully insert the plate into the panel, then push both plungers forward to the closed and locked position. 3.7 Install the jumper organizer rings: The kit includes four black jumper organizer rings that are to be installed near the front of the panel. Two rings should be installed at the outer edges of the front. The remaining two rings are to be installed 5.75" in from the edge. 6

7 4.0 Mounting the Patch Panel 4.1 The panel is designed to fit a standard 19" relay rack using one unit of rack space or 1.75 inches. For 23" rack mounting, an additional 3M 23" Rack Mounting Kit 8423-BKT is required. 4.2 While supporting the unit in place, loosely install the four Phillips mounting screws. Slide the unit all the way forward until the glides hit their stop position. Allow the unit s weight to rest on the glides and tighten the screws. This procedure is necessary to align the glides for smooth operation. 4.3 The unit comes adjusted such that the coupling plates will be flush with the rack when the unit is in its returned position. Optionally, the unit can be recessed in the rack so that the jumper organizer tray is flush to the rack. Loosen the internal adjustment screws approximately 1/4 inch. Push the 8423 unit back into the rack positioning the front edge of the jumper tray flush to the rack. Tighten the adjustment screws to retain the unit within the glides. 5.0 Field Cable Preparation and Placement Note: Leave at least 5' (1.5 m) of field cable slack outside of the patch panel. In case a fiber is broken off inadvertently, the slack allows the cable to be pulled farther into the unit. Slack also allows for future rearrangements. 5.1 Prepare Cable for Tight Buffered Cables: Slit and install the oval cable entry grommet over the end of the cable. Strip approximately 8' (2.5 m) of the cable s outer sheath(s) exposing the 900 µm buffered fibers. Cut back the central strength member leaving approximately 4" (10 cm) protruding from the cable s outer sheath. 7

8 5.1.2 Installing Tight Buffered Cables: Install the grommet in the oval cable port, then position the cable clamp around the cable. Insert the central strength member into the central member clamp at the same time. The central strength member will attach to the inside of the panel for tight buffered cable. Close the cable clamp onto the cable outer sheath. Make sure the cable is held in place securely but not tight enough to compress the fibers. Tighten the central strength member clamp screw to retain the central strength member. 5.2 Prepare Cable for Loose Tube Cables: Slit and install the oval cable entry grommet over the end of the cable. Strip approximately 8' (2.5 m) of the cable s outer sheath(s) exposing the buffer tubes and central strength member. Cut back the central strength member leaving approximately 6" (15 cm) protruding from the cable s outer sheath Installing Loose Tube Cables: Install the grommet in the oval cable port, then position the cable clamp around the cable. Insert the central strength member into the central member clamp at the same time. The central strength member will attach to the outside of the panel for Loose Tube Cables. Close the cable clamp onto the cable outer sheath. Make sure the cable is held in place securely but not tight enough to compress the fibers. Tighten the central strength member clamp screw to retain the central strength member. 8

9 5.3 Secure the cable to the relay rack: To perform properly, the cable must be secured to the rack a short distance (about 2' or 0.6 meters) above the unit. The cable must be routed such that the drawer can glide through its intended motion without putting undue stress on the cable. A properly installed cable will have a bend radius no smaller than 10 cable diameters. When the panel is drawn forward, the cable will pass above the glide rails and below any equipment mounted above. Place the supplied spiral tubing around the cable jacket to protect the cable from damage. Cable Clamp Spiral Tubing REAR VIEW 7 9

10 6.0 Fiber Layout Note: Fiber layout is at the discretion of the user or installer as long as the minimum bending radius specified by the cable manufacturer is not violated. Suggested layouts for both the fiber and the pigtails and direct field termination are shown. 6.1 Direct Termination If the field fibers are to be directly terminated using field mountable connectors, follow the instructions of the connector manufacturer. 6.2 Pigtail Splicing If the field fibers are to be spliced to pigtails proceed as follows: Trim buffer tubes leaving approximately 4" (10 cm) protruding from the cables sheath Cut a 30" (76 cm) piece of 3M Fiber Transition Tubing 2520 and slip over the 250 µm fiber. Repeat for each buffer tube Slip the end of the 3M Fiber Transition Tubing 2520 over the end of the incoming cable buffer tube Temporarily install the 3M Fiber Splice Organizer Tray 2522 in its final location. Place transportation tubing in the fiber clips around and into the splice tray. Follow the instructions supplied with the splice organizer tray. 3M Fiber Splice Organizer Tray 2522 shown 10

11 7.0 Splicing using the 3M Fiber Splice Organizer Tray 2524-SR 7.1 Ensure that splice holders are oriented as shown. Note: If splice holder inserts are not oriented as shown remove and reposition as needed. 7.2 Carefully slide protective tubing over exposed fibers. Both holder tabs face the same direction 7.3 Position protective tubes into tray s guide slots at desired location(s). 7.4 Secure protective tubes with supplied cable ties. Color code per company practice. 7.5 Store fiber slack as mandated by company practice around the outer race track of splice tray. Note: Store sufficient slack to allow for multiple splicing attempts in the event of damage. 7.6 Splice per company practice and install heat shrink tube. 11

12 7.7 Install fiber splices into insert locations. Each set of inserts can hold up to 12 heat shrink tubes for a total of 24 splices per tray Identify the heat shrink tube locations closest to the tray surface. Note: Heat shrink tubes shown without fiber splicing to improve visibility. First layer shrink tubes near tray surface Once all six lower heat shrink tube locations are fully populated, the higher location can be loaded with heat shrink tubes to fully populate the insert set Repeat 7.1 through 7.7 B until 2524-SR splice tray capacity is reached. 12

13 7.8 If required, trays can be stacked and interlocked in such a way as to allow for the trays to hinge Break out hinge pins from tray body. Hinge Pin Stack trays with hinge locations oriented as shown. Align tray hinges Slide hinge pin into slot as shown to lock trays in place. Slide pin into slot until it clicks in place. Repeat on both ends of tray. Insert hinge pin Fully insert pin, click into place 13

14 7.8.4 Ensure that locking tabs on both front sides of tray are locked to prevent trays from hinging open inadvertently. 8.0 Pigtail Layout and Splicing 8.1 Select a Pigtail: Use a 6'-6" (2 m) pigtail or cut a 13' (4 m) jumper in half. Put a tag on the pigtail near the connector indicating the number of the fiber in the cable it is to be spliced to. 8.2 Trim the Pigtail to the Correct Length: Holding the connector near the adapter it will be connected to, route the pigtail in the vacant clips as per sketch. Cut the pigtail at an appropriate length to reach the splice point. 3M Fiber Splice Organizer Tray 2522 shown 8.3 Splice the Field Fiber to the Pigtail: The pigtail end and fiber must be stripped and cleaned for the splicing operation. Follow the splicing procedures of the splice manufacturer. When the splice is completed, route the field fiber loosely in the fiber clips, and carefully lay the splice in the slot of the organizer. Route the pigtail loosely in the fiber clips and insert the connector as described in step 8.4 below. 8.4 Insert the connector of the pigtail into the connector adapter: Remove the coupling s dust caps and clean the inside with a lint-free swab or pipe cleaner dampened with isopropyl alcohol. Blow with dry air, replace right dust cap, then remove the dust cap from the corresponding connector. Clean the connector ferrule with a lint free cloth dampened with isopropyl alcohol. Blow with dry air. Visually inspect the adapter and connector for cleanliness. Insert the connector. Mark the fiber assignment on the internal the fiber assignment label. Note: Carefully follow safety, health, and disposal information on container label or Material Safety Data Sheet for isopropyl alcohol being used. 14

15 8.5 Perform steps 8.1 through 8.4 for all remaining Fibers and Pigtails then reinstall panel cover. Pigtail Layout 3M Fiber Splice Organizer Tray 2522 shown 9.0 Jumper Layout Notes: 9.1 Clean and install the jumper connector into the appropriate adapter. Dress the jumper fiber into the black organizing rings to minimize tight bending stress or tension. Jumpers can approach the unit from the left or the right side. Jumpers should be organized on the rack to provide sufficient slack to allow movement of the panel in its glides. 9.2 Mark the jumper designation on the external fiber assignment label. Do not insert connectors into equipment at either end until the jumper is secured on the cable racks. Do not remove dust caps from either end of the cable assemblies until immediately prior to connection to the equipment. If cable assemblies (jumpers) are to be pulled through enclosed conduit, use proper procedures to protect connector ends from damage and protect the cable from high tensile loads. It is recommended that cable assemblies be laid in open raceways where possible. Follow building fire codes when specifying cable jacket materials for the application intended. 15

16 3M and Fibrlok are trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Communication Markets Division 6801 River Place Blvd. Austin, TX Please Recycle. Printed in USA. 3M All Rights Reserved.

INSTALLATION GUIDE. Optical Fibre Patch Panel 48 fibre LC. Nexans Cabling Solutions Installation Guide 48 fibre LC panel page 1

INSTALLATION GUIDE. Optical Fibre Patch Panel 48 fibre LC. Nexans Cabling Solutions Installation Guide 48 fibre LC panel page 1 Optical Fibre Patch Panel 48 fibre LC INSTALLATION GUIDE Optical Fibre Patch Panel 48 fibre LC Nexans Cabling Solutions Installation Guide 48 fibre LC panel page 1 Document Information Release July 2006

More information

4RU High Density Shelf Installation Instructions

4RU High Density Shelf Installation Instructions 4RU High Density Shelf Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Tools Required... 3.0 Package Contents... 4.0 Installing the Product Unpacking...

More information

SC, FC and ST * Hot Melt Fiber Optic Connectors

SC, FC and ST * Hot Melt Fiber Optic Connectors SC, FC and ST * Hot Melt Fiber Optic Connectors Instructions September 1998 78-8073-7873-8 2 Contents 1.0 Safety and Helpful Hints...4 2.0 Field Termination Kit Contents...4 3.0 STÑInstallation on 900

More information

2178-S Fiber Optic Splice Case

2178-S Fiber Optic Splice Case 2178-S Fiber Optic Splice Case Instructions March 1998 34-7041-6288-1-B 1 2 Table of Contents 3M 2178-S Splice Case Description... 4 1.0 General...4 2.0 Specifications...4 3.0 Kit Contents...5 3M 2178-S

More information

Expanding a 40-Type Cabinet

Expanding a 40-Type Cabinet Expanding a 40-Type Cabinet using the 3M Add-On Terminal 4220P 400-Pair and Jumper Trough Instructions January 2006 Table of Contents 1.0 General... 3 2.0 Cabinet Overall Descriptions... 3 3.0 Tools Required...

More information

FPX Series 1U & 2U Fiber Panel Installation Instructions

FPX Series 1U & 2U Fiber Panel Installation Instructions FPX Series 1U & 2U Fiber Panel Installation Instructions ADCP-92-098 Issue 3 8/2011 1U PANEL 2U PANEL 23967-B Content Page INTRODUCTION.............................................................................

More information

Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement

Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement This work instruction describes the methods and means for which to remove and reinstall optional scanner cable configurations

More information

3M Quick Connect System (QCS) 2810 Models 2810A and 2810B

3M Quick Connect System (QCS) 2810 Models 2810A and 2810B 3M Quick Connect System (QCS) 2810 Models 2810A and 2810B Instructions October 2010 3 Contents 1.0 General...3 2.0 Recommended Installation Procedure for 3M Quick Connect Systems 2810A and 2810B...3 3.0

More information

Fiber Optics TII FDH1. Indoor Fiber Distribution Cabinet

Fiber Optics TII FDH1. Indoor Fiber Distribution Cabinet TII FDH1 Fiber Optics Indoor Fiber Distribution Cabinet Fiber Optics. A Division of Tii Network Technologies Inc. 5103 Pegasus Ct., Suite H Frederick, MD 21704 Contact 888-844-4720 301-874-4688 fibersales@tiinetworktechnolgies.com

More information

FL1000 Rack-Mount Panel Installation and Operation Guide

FL1000 Rack-Mount Panel Installation and Operation Guide FL1000 Rack-Mount Panel Installation and Operation Guide 21542-A FL1000 Rack-Mount Panel (24 Position Terminal Panel Shown) Content Page INTRODUCTION.............................................................................

More information

Optical Cable Entry Facility (OCEF) Installation Instructions

Optical Cable Entry Facility (OCEF) Installation Instructions Instruction Sheet 860380690 Issue 4, February 2014 Uniprise Solutions Optical Cable Entry Facility (OCEF) Installation Instructions General The Optical Cable Entry Facility (OCEF) cabinet stores optical

More information

Service Cable Assembly Installation Instructions

Service Cable Assembly Installation Instructions Service Cable Assembly Installation Instructions Overview Purpose This document provides instructions for installing an optical fiber service cable assembly into a Cisco optical node, optical hub, or similar

More information

4 Small Cables Sealing Kit: Wrap Style

4 Small Cables Sealing Kit: Wrap Style 4 Small Cables Sealing Kit: Wrap Style I N S T A L L A T I O N I N S T R U C T I O N Gel Wrap Kit For Sealing up to 4 Small Cables in FOSC 450 & FOSC 600 Closures Max. Combined Diameter Closure Port of

More information

3M Scotchcast Mine and Portable Cable Splice Kit 8096-4

3M Scotchcast Mine and Portable Cable Splice Kit 8096-4 3M Scotchcast Mine and Portable Cable Splice Kit 8096-4 Installation Instructions 1.0 Kit Contents: 2 Funnels 3 EPDM Rubber Cold Shrink Cold Shrink Insulator 1 Wrap-around Mold Assemblies 2 Rubber Mold

More information

Pretium Connector Housings

Pretium Connector Housings Pretium Connector Housings A LANscape Pretium Solutions Product Applications Main cross connect, intermediate cross connects and telecommunications rooms Rack or equipment cabinet installations Data center

More information

X-ACTA Fence Kit Installation Instructions

X-ACTA Fence Kit Installation Instructions X-ACTA Fence Kit Installation Instructions Please note this installation kit is designed solely for installation on the Commercial Jet XACTA Fence (VERSION I ONLY). Accurate Technology manufactures kits

More information

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR FIBER OPTIC CONTACTS AND MODULES Table of Contents SECTION 1 CONTACT INSTALLATION AND REMOVAL SECTION 2 MODULE INSTALLATION AND REMOVAL SECTION

More information

Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable

Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable Panduit Corp. 2009 BEST PRACTICES PN447B \ Table of Contents 3 2.0 Preparation Notes Tools and Material

More information

CamSplice Assembly Manual

CamSplice Assembly Manual Corning Cable Systems SRP-006-038 Issue 9, September 2000 Page 1 of 6 CamSplice Assembly Manual Table of Contents 1. General... 1 2. Precautions... 1 3. Tools and Materials... 2 4. Cable and Fiber Preparation...

More information

MOTM-900 Power Supply Assembly Instructions & Owner s Manual

MOTM-900 Power Supply Assembly Instructions & Owner s Manual MOTM-900 Power Supply Assembly Instructions & Owner s Manual Synthesis Technology 6625 Quail Ridge Dr. Fort Worth, TX 76180 (817) 498-3782 www.synthtech.com June 25, 2003 SYNTHESIS TECHNOLOGY MOTM-900

More information

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 BAL Accu-Slide System I. Table of Contents TABLE OF CONTENTS I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 II. GETTING STARTED... 5 - Section 2.01: Tools You Will Need... 5 - Section

More information

Fiber Optic Cable Assemblies. Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable

Fiber Optic Cable Assemblies. Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable Fiber Optic Cable Assemblies Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable 1 Cable assemblies used in patch panels (Fiber Distribution Units) are an essential interface

More information

HP 16/18-Port Cable Management Kit Installation Guide

HP 16/18-Port Cable Management Kit Installation Guide HP 16/18-Port Cable Management Kit Installation Guide Abstract This document describes how to attach the HP 16 Port or 18 Port Cable Management Kit to an HP rack. The cable management bracket is designed

More information

Reasons for reissue are in Section 6, REVISION SUMMARY.

Reasons for reissue are in Section 6, REVISION SUMMARY. Figure 1 This instruction sheet covers the application of OPTIMATE FSMA Fiber Optic Connector Types 905 and 906 for data and telecommunications applications. Base part numbers which apply to each type

More information

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors 87-95 Jeep Wrangler IMPORTANT NOTICE: Carefully read instructions before attempting to install this product. Rampage Products

More information

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE NG0M Triple Threat 3-in- Game Table 3 IN GAME TABLE Thank 3 in Y Game Table Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain

More information

Instruction Sheet Modular Plug Hand Tool (Premium Grade) [ ]

Instruction Sheet Modular Plug Hand Tool (Premium Grade) [ ] Instruction Sheet Modular Plug Hand Tool (Premium Grade) 231652 [ ] 07 JUN 02 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools

More information

3M Fiber Optic Splice Closure 2178-LS Series with Gasket

3M Fiber Optic Splice Closure 2178-LS Series with Gasket 3M Fiber Optic Splice Closure 2178-LS Series with Gasket Instructions for: 3M Fiber Optic Splice Closures 2178-LS Series 3M Flame Retardant Fiber Optic Splice Closures 2178-LS/FR 3M Cable Addition Kit

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL STERNMOUNT MARINE TOWER KIT OWNER S MANUAL VERSION 1.5 Made in the USA by: Southwest Windpower 1801 W. Route 66 Flagstaff, AZ 86001 (520) 779-9463 AIR Marine is a trademark of Southwest Windpower Inc.

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

Teledyne Isco Syringe Pumps: Care and Maintenance

Teledyne Isco Syringe Pumps: Care and Maintenance Teledyne Isco Syringe Pumps: Care and Maintenance ~ Overview ~ This bulletin provides instructions for performing normal periodic maintenance required by Teledyne Isco syringe pumps, followed by servicing

More information

DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR. Installation and Operation Manual

DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR. Installation and Operation Manual DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR Installation and Operation Manual 1 ENGLISH Safety Instructions 2 Features 2-3 Specifications 3 Installation 4-5 Wiring Diagrams 6-7 Warranty 8

More information

INSTALLATION MANUAL. Installation Instructions

INSTALLATION MANUAL. Installation Instructions INSTALLATION MANUAL Power-Pole Signature Series Shallow Water Anchor Installation Instructions CAUTION: Read this instruction manual carefully. Become familiar with the controls and know how to operate

More information

HP 36-Port InfiniBand Switch Cable Management Kit Installation Guide

HP 36-Port InfiniBand Switch Cable Management Kit Installation Guide HP 36-Port InfiniBand Switch Cable Management Kit Installation Guide HP Part Number: 574412-doc Published: May 2009 Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein

More information

Model A Turn Signal Kit Installation Guide

Model A Turn Signal Kit Installation Guide Model A Turn Signal Kit Installation Guide Consumer Hot Line: 888-471-LOGO 770-476-7322 In Atlanta, GA http://www.logolites.com P/N: 100-005/G 2003 3407 Hwy. 120 Duluth, GA 30096, USA Logo Lites and the

More information

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830

More information

Wrist Strap Tester Operating Instructions

Wrist Strap Tester Operating Instructions 3 746 Wrist Strap Tester Operating Instructions 746 wrist strap tester 3 Listed Read and Understand all Safety Information Before Operating this Equipment. Safety Information Intended Use The 3M 746 Wrist

More information

CHROME FRONT BRAKE MASTER CYLINDER KIT

CHROME FRONT BRAKE MASTER CYLINDER KIT -J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder

More information

INSTALLATION GUIDE PREMIUM FRONT BUMPER. AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL

INSTALLATION GUIDE PREMIUM FRONT BUMPER. AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL PREMIUM FRONT BUMPER AEV30103AD Last Updated: 12/03/13 US PATENT: D683,281 CHINESE PATENT: ZL 2012 3 0026032.0 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND

More information

MDU SC Connector Termination Procedure

MDU SC Connector Termination Procedure MDU SC Connector Termination Procedure Series: 718-NANN-NNNNN B Update the stripping length 11/24/09 A Initial Release 4/30/09 Version Revision History Summary Issue Date I INTRODUCTION This document describes

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

EZ-Steer Assisted Steering System

EZ-Steer Assisted Steering System EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT

More information

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 1. Lay out and familiarize yourself with the components and hardware supplied with the hitch. Note the included trailer wiring isolator

More information

Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications

Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications Table of Contents Safety Check List...2 Existing Shelving Assembly Notes...3 Three Basic Assembled Types...3 Recommended Drawer

More information

SYSTIMAX 360 ipatch G2 High Density Fiber Module Installation Instructions

SYSTIMAX 360 ipatch G2 High Density Fiber Module Installation Instructions Issue 6, June 2014 SYSTIMAX 360 ipatch G2 High Density Fiber Module Installation Instructions General The SYSTIMAX 360 ipatch high density fiber module is a SYSTIMAX approved product designed for use in

More information

Opticom Fiber Optic Splice Module

Opticom Fiber Optic Splice Module Opticom Fiber Optic Splice Module Part Numbers: FOSMF, FOSMM Panduit Corp. 2014 INSTALLATION INSTRUCTIONS FOSMF in open position FOSMM in open position FOSMF OR FOSMM in closed position Contents: (1) SPLICE

More information

3M I/O Connector Mounting Options and Hardware

3M I/O Connector Mounting Options and Hardware M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: April 24, 2012 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.

More information

Remote Outboard Steering System. 2 & 4 Stroke Outboards Up to 15 HP

Remote Outboard Steering System. 2 & 4 Stroke Outboards Up to 15 HP By Remote Outboard Steering System 2 & 4 Stroke Outboards Up to 15 HP Introduction Thank you for purchasing the Electra-Steer remote outboard steering system. This manual has been provided to assist you

More information

Scotchgard Multi-Layer Protective Film 1004

Scotchgard Multi-Layer Protective Film 1004 Scotchgard Multi-Layer Protective Film 1004 3 Technical Bulletin September, 2008 Scotchgard Multi-Layer Protective Film 1004 Application Kit (3M Part No. 70-0710-4666-1) includes: (clockwise) Heavy Duty

More information

Discontinued. Volition. Fiber Optic Cable. 3Innovation

Discontinued. Volition. Fiber Optic Cable. 3Innovation Volition Fiber Optic Cable Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125

More information

CETAC Z-Drive Assembly

CETAC Z-Drive Assembly CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your

More information

HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015

HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015 HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015 Fiber Optic VAR Program Hirose Launches Fiber Optic Cabling VAR Program to provide a complete fiber optic cable assembly and wire harness solutions to

More information

Traditional Sonar and DSI Sonar Installation

Traditional Sonar and DSI Sonar Installation Traditional Sonar and DSI Sonar Installation This document covers the installation of the transducer and display unit installation, which includes connecting the unit to power and installing the unit on

More information

VW Jetta, Golf, New Beetle 1.9L TDi Unichip PnP Installation Instructions

VW Jetta, Golf, New Beetle 1.9L TDi Unichip PnP Installation Instructions VW Jetta, Golf, New Beetle 1.9L TDi Unichip PnP Installation Instructions and Warranty Information Tools Required 10mm combination wrench, 13mm Socket (Jetta/Golf only), 3/8-inch or ¼-Inch drive ratchet,

More information

LANC Fibre Patch Panel Solution

LANC Fibre Patch Panel Solution features and benefits Modular front with interchangeable fibre optic adapter modules Quick mount feature (teardrop design) Port numbers printed above and below adapter modules High-density using LC connectivity

More information

Installation Instructions Kit, Base Rail Bracket Part # 31404

Installation Instructions Kit, Base Rail Bracket Part # 31404 Installation Instructions Kit, Base Rail Bracket Part # 31404 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions. provide important operating and

More information

About the BitStorm 6051 POTS Splitter

About the BitStorm 6051 POTS Splitter BitStorm 6051 Installation Instructions Document Number 6051-A2-GZ40-10 July 2002 About the BitStorm 6051 The BitStorm system enables simultaneous high-speed digital data access and analog voice service

More information

Installation Instructions 4508 4508S

Installation Instructions 4508 4508S SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect

More information

jbs nfb INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Mechanical Steering for Inboard, Outboard, and Sterndrive Powered Vessels

jbs nfb INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Mechanical Steering for Inboard, Outboard, and Sterndrive Powered Vessels MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # IS-SH5094, Rev 3, 04/204 www.seastarsolutions.com SH5294 DUAL SH5094 SINGLE jbs nfb Mechanical Steering for Inboard, Outboard, and Sterndrive Powered

More information

AM/FM ANTENNA RELOCATION KIT

AM/FM ANTENNA RELOCATION KIT -J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model

More information

FCS-FCT-FCP Housings and Connector Panels. InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2

FCS-FCT-FCP Housings and Connector Panels. InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2 Product Family: Product: Fibre: LANscape Hardware Solutions FCS-FCT-FCP Housings and Connector Panels InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2 Applications Corning Cable

More information

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION

More information

http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html

http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -

More information

Z-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly

Z-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly Replacing the Cover Micro-Switch To remove and replace the Cover Micro-Switch you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) #1 Phillips screwdriver (magnetic tip preferred)

More information

VisiFault Visual Fault Locator

VisiFault Visual Fault Locator VisiFault Visual Fault Locator Instruction Sheet The VisiFault Visual Fault Locator (VFL) is a visible light source that helps you trace optical fibers, check fiber continuity, and find faults such as

More information

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054 owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact

More information

COYOTE PUP CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 17" (152.4 mm x 431.8 mm)

COYOTE PUP CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0 x 17 (152.4 mm x 431.8 mm) FEBRUARY 2005 COYOTE PUP CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 17" (152.4 mm x 431.8 mm) Be sure to read and completely understand this procedure before applying product. Be sure to

More information

FACT OPTICAL DISTRIBUTION FRAME SYSTEM

FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/Patch and Patch/Patch For almost 30 years, CommScope has led the industry with solutions such as FIST fiber management system, providing a system of fiber management from

More information

RayClic Connection System Installation Instructions

RayClic Connection System Installation Instructions RayClic Connection System Installation Instructions Description RayClic-S Splice Kit RayClic-T Tee and End Seal Kit RayClic-X Cross and End Seal Kit These kits are for use with Raychem IceStop, XL-Trace

More information

Instructions. SC & FC/PC3 Pull-Proof Fiber Optic Connectors

Instructions. SC & FC/PC3 Pull-Proof Fiber Optic Connectors Instructions SC & FC/PC3 Pull-Proof Fiber Optic Connectors Termination Procedures for Single-mode and Multimode Field-Mountable Connectors using Epoxy Issue 1, May 1993 Contents: A) Warnings, Recommendations

More information

*PATENT PENDING. NS1100 / NS2200 Installation Manual & Owner s Guide

*PATENT PENDING. NS1100 / NS2200 Installation Manual & Owner s Guide *PATENT PENDING NS1100 / NS2200 Installation Manual & Owner s Guide Installation Tips Contents 1 Control Panel 1 Spool of Signal Wire 2 Mounting Screws & Drywall Inserts 2 Wire Clips 3 Wire Ties Tools

More information

Fits in a 19" or 23" rack, and supports 6 adapter panels or LGX cassettes.

Fits in a 19 or 23 rack, and supports 6 adapter panels or LGX cassettes. JPM418A-R5 Fiber Rackmount Cabinet Fits in a 19" or 23" rack, and supports 6 adapter panels or LGX cassettes. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call

More information

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT -J070 REV. 0-0-0 FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT GENERAL Kit Number 9-09A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129 PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: The information included in this Splendide Repair Manual may change without notice. Please see our web site www.splendide.com/service/docs.html for updates,

More information

Installation Guide. Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit

Installation Guide. Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit Installation Guide Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter. 2. Describe

More information

SCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT

SCREAMIN' EAGLE HEAVY BREATHER PERFORMANCE AIR CLEANER KIT REV. 05-04- SCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT GENERAL Kit Numbers 95-08B, 9006-09B, 876-0A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories

More information

Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top.

Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top. Here are some pictures to show what s required when replacing the A/C compressor, expansion valve and receiver/drier on a 2001 Volvo V70. Even if you don t replace these A/C parts these pictures can help

More information

Fiber Optic Cable Installation

Fiber Optic Cable Installation Quick Guide Fiber Optic Cable Installation Introduction Fiber optic cables can be easily damaged if they are improperly handled or installed. It is imperative that certain procedures be followed in the

More information

R O A D M A S T E R, I N C.

R O A D M A S T E R, I N C. R O A D M A S T E R, I N C. 11 10 20 12 4 18 19 1 2 13 16 ITEM QTY NAME MATERIAL 1...2... 1/2" x 3 1/2" BOLT... 350103-00 2...2... 1/2" x 2" BOLT... 350097-00 3...6... 1/2" x 1 1/2" BOLT... 350095-00 4...2...

More information

INSTALLATION & OPERATION MANUAL MODEL 430TM

INSTALLATION & OPERATION MANUAL MODEL 430TM SWITCH CONTROL Contents: Introduction... 2 Safety First...3 Unpacking & Pre-Installation... 3 Installation... 4 Wiring... 5 Parts List... 6 Warranty... 8 The Switch Box switch control panel is designed

More information

Universal Vehicle Power Supply 9007AX01. Installation Instructions

Universal Vehicle Power Supply 9007AX01. Installation Instructions Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in

More information

BIX Termination Blocks

BIX Termination Blocks Characteristics One piece unit that passes the connection through Unit is reversed after cable connection for the cross-connect field Mounting Frames are available 250-pair, in 50-pair, 300-pair and 900-pair

More information

RayClic Connection System Installation Instructions

RayClic Connection System Installation Instructions F M -W RayClic Connection System Installation Instructions RayClic WARNING: Shock Hazard 718K Pipe Heating Cable with HWAT, IceStop, also Listed De-icing and and XL-Trace heating Snow Melting Equipment

More information

SYSTIMAX 360 360G2 4U Fixed Rear Access Combination Shelf Instructions

SYSTIMAX 360 360G2 4U Fixed Rear Access Combination Shelf Instructions Issue 7, April 2014 SYSTIMAX 360 360G2 4U Fixed Rear Access Combination Shelf Instructions General The SYSTIMAX 360 360G2 4U rear access fiber optic combination shelf mounts onto a standard 19-inch (483mm),

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: Illuminated Kick Plate APPLICATION: Rogue (2011) PART NUMBER: 999G6 GX010 KIT CONTENTS: Item A B C G H QTY 1 1 1 D 1 E 1 F 3 15 6 Description Kick Plate,

More information

Service Guide. Gateway M275

Service Guide. Gateway M275 Service Guide Gateway M275 Contents Replacing Gateway M275 Components.................................... 1 Identifying the convertible tablet PC model...................................... 2 Identifying

More information

Form #5327, Rev. RTP, 03-28-12. Honda Civic DRL KIT 2011-UP Part Number: 260-1022-HN2

Form #5327, Rev. RTP, 03-28-12. Honda Civic DRL KIT 2011-UP Part Number: 260-1022-HN2 Form #5327, Rev. RTP, 03-28-12 Honda Civic DRL KIT 2011-UP Kit Contents Item # Qty. Description 1 1 Controller 2 2 DRLs 3 2 Bezels L, R 4 1 DRL Extension 5 1 Ignition Harness 6 1 Illumination 7 1 Ground

More information

Installation Instructions

Installation Instructions 520 Installation Instructions Thank you very much for purchasing PIAA product. Please read this entire manual before installation and use of this product. For Installers Please give this Installation Manual

More information

CordlessPleated FabricShade including Top-Down/Bottom-Up. owner's handbook

CordlessPleated FabricShade including Top-Down/Bottom-Up. owner's handbook CordlessPleated FabricShade including Top-Down/Bottom-Up owner's handbook July, 2013 español página 9 2 INSTALLATION INSTRUCTIONS Step 1. Check Package Contents Missing part? Call 1-800-264-1190 Mounting

More information

Rack Installation Instructions

Rack Installation Instructions Rack Installation Instructions Second Edition (June 2014) 2014 Contents Chapter 1. Safety information..... 1 Chapter 2. Rack kit parts inentory... 3 Chapter 3. Rack installation...... 5 Identifying the

More information

Installing Your 960 or 980 Server into a Rackmount Cabinet

Installing Your 960 or 980 Server into a Rackmount Cabinet Installing Your 960 or 980 Server into a Rackmount Cabinet 1 2 Contents Installing Your Gateway Server into a Rackmount Cabinet...1 Identifyingpartsintheaccessorykit...2 Rackmounthandlekit... 2 Rackmountrailkit...

More information

COMPACT ELITE MAT CUTTER

COMPACT ELITE MAT CUTTER INSTRUCTION MANUAL MODEL 350-1 COMPACT ELITE MAT CUTTER INSTRUCTIONS AND OPERATION MANUAL 32in (81cm) mat cutting system with bevel & straight cutters, production stops and 20 in (51 cm) squaring bar.

More information

Kitchen Base Cabinet with Door and Drawer

Kitchen Base Cabinet with Door and Drawer Kitchen Base Cabinet with Door and Drawer MLCS Products Used: #8376/6076 3-Piece Plywood Straight Bit Set or #7790/5490 5.2mm (13/64 ), #7795/5495 18.2mm (23/32 ) Straight Bits #7694 3/4 Rabbeting Bit

More information

Instructions. 2178 Fiber Optic Splice Case

Instructions. 2178 Fiber Optic Splice Case Instructions 278 Fiber Optic Splice Case Issue 3, March 992 Contents:.0 General... 3 2.0 Specifications... 3 3.0 Kit Contents... 3 4.0 Cable/Splice/Kit Matrix... 6 SECTION : 278 SPLICE CASE INSTRUCTIONS...

More information

MGB Chrome Bumper Conversion

MGB Chrome Bumper Conversion MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different

More information

Retail Reception kiosk

Retail Reception kiosk Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E

More information

Installation Guide 2010 BMW S1000RR Full Exhaust System

Installation Guide 2010 BMW S1000RR Full Exhaust System Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade

More information

Rack Installation. Unpacking the System. Choosing a Setup Location. General Server Precautions. Barracuda Appliances

Rack Installation. Unpacking the System. Choosing a Setup Location. General Server Precautions. Barracuda Appliances This set of instructions applies to racking and rail kit installation for 6XX and above. The Rack Mounting Instructions section below provides information on installing the SC825 chassis into a rack unit

More information

installation instructions

installation instructions installation instructions ACCESSORY ELECTRIC HEAT 208/230 AND 460-V UNITS 558E,F Sizes 240-324 20 to 27 Tons Cancels: New IIK 558E-240-9 11/1/94 IMPORTANT READ BEFORE INSTALLING 1. Read and become familiar

More information