2-in-1 Cordless Vacuum Cleaner User manual

Transcription

1 2-in-1 Cordless Vacuum Cleaner User manual Model: FVCH18V15 *Please carefully read the user manual and all safety notices before using the product; please keep the user manual for you to refer to in the future.

2 CONTENT PAGE SAFETY INSTRUCTION 1 PARTS DESCRIPTION 2 OPERATION INSTRUCTION 3 MAINTENANCE INSTRUCTION 6 TROUBLESHOOTING 8 SPECIFICATION 8 WARRANTY 9

3 SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. 1. To avoid electric shock, fire or injury, please read the user manual carefully before using the appliance and keep it for future reference. 2. This appliance is for household use only. Please use suitable power source. (Please refer to SPECIFICATION) 3. Never immerse the appliance, plug, power supply unit, and the charge base in water or other liquids. 4. Do not use the appliance under direct sunshine. 5. Please turn off the appliance when not in use otherwise it may result in danger. 6. Please turn off the appliance and unplug the socket when unattended otherwise it may result in danger. 7. Keep the appliance away from children. 8. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 9. Children should be supervised to ensure that they do not play with the appliance. 10. With any indication of damage or malfunction, please stop using the appliance immediately to avoid hazards. Take it to the authorized service center for repair. Do not attempt to repair or change any parts by yourself. 11. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazards. 12. Please turn off and unplug the appliance before cleaning or maintenance. 13. Clean the surface of the appliance with a dry cloth. Do not use corrosive detergent or solvent to clean. Do not swash the appliance with water. 14. Please turn off and unplug the appliance when not in use. Make sure the power is off before pulling out the plug and do not pull the cord. 15. When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well, and store it in dry cool place. 16. Forbid to put flammable and explosive objects around the appliance, and do not use the appliance in an environment full of flammable gas and powder. Keep away from any fire and heat sources. 17. Please only use the attached accessories. 18. Do not insert any objects into the air outlet. Keep the air outlet free of dust and hair, as those may reduce the suction. 19. Please do not forcibly bend or step on the appliance. 20. Do not pick up anything that is burning, such as cigare es, matches, or hot ashes. 21. Please put the power cord in the right place in order to avoid tripping the appliance over. 22. The appliance is only to be used with the power supply unit provided with the appliance. 23. The Please take the appliance to the authorized service center to remove the battery. 24. The 25. The 1

4 PARTS DESCRIPTION 1 Handle power button 2 2-stage power adjustment button 3 Body release button 4 Body power button 5 Dust collection tank release button 6 Dust collection tank 7 Filtering cotton 8 Brush release button 9 Electrical soft roller brush 10 Handle fixing screw 11 Power supply terminal slot (rear) 12 Stick-type charging base 13 Small suction head 14 Small suction head connection pipe 15 Small suction holder 16 Charging base 17 Body handle Features Comfortable handle Cordless design with rechargeable battery Stick / handheld 2 in 1 design 18V 1800mAh Ni-MH battery High / low 2-stage power control adjustment Running time about 23 minutes in maximum under high power control Running time about 35 minutes in maximum under low power control 2 color indicator lamp Cyclone-type filtering system + clear dust collection tank Electrical soft roller brush With charging base, convenience storage Can stand independently without leaning against the wall 2

5 OPERATION INSTRUCTION Note: If the air outlet is blocked, please switch off the appliance at once. Clear the blocked substance before starting the appliance again Before using the appliance, please remove any large or sharp objects on the floor in order to prevent damages to the filter. ASSEMBLING THE VACUUM CLEANER Please use a screw driver to loose and remove the handle fixing screws at the rear of the body, insert the handle into the upper slot of the body, and tighten up the fixing screws. Please align the stick-type charging base with the groove of the charging base, and insert it downward until you hear a click sound. Connect the small suction head to the connection pipe. Insert the small suction head set into the holder of the charging base for use. Align the body set with the upper protrusion edge of the electrical soft roller brush, and insert it until you hear a click sound. 3

6 Charging: Align the slot at the rear of the body with the upper protrusion edge of the stick-type charging base, and insert the body; besides, keep the body stable to avoid the body falls over. Firmly insert the plug of the power supply unit into the wall socket to avoid the plug dropping off from the socket; then, align the terminal of the power supply unit with the slot at the rear of the stick-type charging base, and insert the terminal upward to ensure the safety. Rear of bar-type charging base Rear Terminal Slot Power Supply Note: The charging time is about 5 hours. When the appliance is being charged, the power indicator lamp will turn red. When the appliance is fully charged, the indicator lamp will turn green, and will be off automatically after 10 minutes, which means the appliance is fully charged and ready for use. When the power indicator lamp turns green and blinks, which means the electricity capacity of the power supply is lower than 50%, and the appliance should be charged again. The appliance can be operated in high power for up to 23 minutes after being fully charged. The appliance can be operated in low power for up to 35 minutes after being fully charged. Please remove the power supply unit from the socket and the charging base when the appliance does not need to be charged; please store the power supply unit at a proper place. 4

7 Operate in stick-type After the appliance is fully charged (the indictor turns green), hold the rear handle of the body and take up the appliance from the charging base. Press the power button on the handle to turn on the appliance; press again to turn off the appliance. Press the two-stage power adjustment button to control the dust suction speed: First stage: high power; second stage: low power Press the button to switch between the high and low power control. Applicable on: carpets, floors, and other large-area places. Operate in handheld-type Press the body release button to loosen the handheld body. Please hold the upper handle of the handheld body to take it out. Connect the small suction head to the connection pipe, and insert it into the lower inlet of the dust collection tank of the body set. Adjust the direction of the suction head with the soft brush to avoid scratching the table surface, glass, and other smooth surfaces. Applicable on: corners, gaps, tables, furniture, car seats, and etc. Body Release Button Upper Handle Body Slot Handheld-type Small Suction Adjustable suction head 5

8 MAINTENANCE INSTRUCTION The dust collection tank and the filter should be cleaned frequently to ensure the appliance is always with the best suction power. Please make sure the power switch is turned off and the power supply unit is unplugged from the socket before cleaning the body. The dust collection tank should be cleaned when it is full of dust. After the filter is cleaned, it is necessary to dry the filter completely before reinstalling it on the body so as to avoid electric shock. Steps 1. Press the body release button to loosen the handheld-type body. Then, hold the upper part of the handheld body to take out it. 2. Press the dust collection tank release button to remove the dust collection tank. Dust collection tank release button 3. Take out the cyclone-type filter and the filtering cotton. Cyclone-type filter 6

9 4. Take out the filtering cotton and separate the blue filtering cotton, and use a brush to clean it; then, install the filtering cotton back to the appliance after it is completely dried. 5. The cleaned dust collection tank, cyclone filter and the small suction that made of plastics can be washed by water. Install them back to the body after completely dried to prevent from electric shock. 6. The filtering cotton in the air inlet of the motor should be cleaned frequently. After taken out the cotton, wash the cotton by water and install the cotton back to the appliance after the cotton is completely dried. Cleaning and replacement of the electrical soft roller brush Motor Filtering Cotton If the brush is worn or stuck, it should be cleaned or replaced (only with components with the same specification) to make sure the brush can smoothly operate and ensure the safety; the rotation shaft of the electrical soft roller brush tends to be stuck by cotton fibers, hairs and the like, so the rotation shaft should be kept cleaned. 1. Press the brush release button to take out the brush (left bottom figure), and use a flathead screwdriver to left rotate the small cover at the left bottom of the brush (right bottom figure); then, use the screwdriver to remove the dust and hairs or use your fingers to pull the edge of the soft brush to remove the dust and hairs. 2. If there are matted cotton fibers or hairs, use a scissor to cut them and clean the rotation shaft to make sure the rotation shaft can rotate smoothly; after the rotation shaft is cleaned, please install the rotation shaft back to the appliance by reverse process. 3. The soft roller brush is a consumable; if the soft roller brush is worn after a period of time, please contact the repair center to purchase a new component to replace the old one by the above process. Brush Release Button 7

10 Troubleshooting Problem Possible cause Solution The appliance cannot be operated. The electricity of the battery is exhausted. Charge the battery. The appliance is automatically turned off after the green or red indicator blinks for 3 times. The appliance is automatically turned off after the green and red indicator alternatively blinks for 3 times. The suction force of the appliance becomes weak. The rechargeable battery malfunctions. The power supply unit is damaged and cannot be charged. The electrical roller brush cannot work or smoothly operate. The dust collection tank is full. The air inlet or the cyclone filter is blocked. The electricity of the appliance is insufficient. Charge the battery again; if the battery cannot be charged, please bring the appliance to the repair center to check and repair. Replace the power supply unit. Clean the dust collection tank or clean the rotation shaft of the roller brush. Clean the dust collection tank. Clean the air inlet or the cyclone filter. Recharge the appliance. SPECIFICATION Model No. Product name FVCH18V15 Vacuum Cleaner Rated Voltage(Vacuum Cleaner) Rated input (Power supply unit) V ~ 50/60Hz, 0.5A Rated output (Power supply unit) 25V d.c., 400mA Dust capacity 0.3L Net weight Dimension (W x H x D) 2.7kg 260 x 194 x 1,080 mm 8

11 WARRANTY 1. The product has 2 years warranty from the date of purchase. 2. The warranty shall not apply: A. to any product subjected to misuse, alteration, act of God, improper handling, improper transport, improper testing or unauthorized repair; B. to cosmetic problems or defects which result from normal wear and tear under ordinary use yet not affecting the performance or use of the product; C. if the product is disassembled or altered; D. to any packing, transportation, export / import tax or any related expenses. 3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 2 YEAR WARRANTY SERVICES. 4. Please bring along the product and sales invoice or receipt to our services center for warranty services during office hour: Address : Unit A, 20/F, Yip Shing Industrial Centre, No.19, Yip Shing Street, Kwai Chung, Hong Kong Service Hotline : (852) Service Hours: Monday-Friday : 9:00am - 6:00pm Saturday : 9:00am - 4:00pm Sunday & Public Holiday : Closed NOTES This appliance must be plugged into a specific V socket. Please make sure the plug is fully plugged-in before use. Do not use any adapter or extension cord. This appliance is a high energy consumption product, please do not use with other high energy consumption product into the same supply socket. THE APPLIANCE IS FOR HOUSEHOLD USE ONLY. ENVIRONMENT Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help preserving the environment. IMPORTANT NOTICES IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY, BUSINESS PROFITS, BUSINESS INTERRUPTION) OR FROM ANY BREACH OF WARRANTY, EVEN IF OUR COMPANY OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL OUR COMPANY OR SUPPLIER S LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. Specifications, designs and dimensions are subject to change without prior notice. 9