Polyethylene (PE) Pipes. Industrial Products Catalog

Size: px

Start display at page:

Download "Polyethylene (PE) Pipes. Industrial Products Catalog"

Lillian Watts
7 years ago
Views:

1 Polyethylene (PE) Pipe Indutrial Product Catalog

2 Company Profile General Overview HaykalPlat wa firt founded in 1993, and the factory i now located in Zouk Mobeh. In addition to manufacturing PVC pipe and fitting under the brand name MIA, HaykalPlat i now manufacturing HDPE pipe. Keeping up with it high quality tandard, Haykal Plat ha obtained the ISO 9001:2008 certificate along with product certification for Indutrial Reearch Intitute (IRI). Haykal Plat i committed to maintaining the quality of it product through conitant and continuou teting in it own laboratorie, a well a in collaboration with IRI. Haykal Plat manufacture HDPE 100 and HDPE 80 pipe (in blue and black color) according to EN tandard in 50, 100, 150 and 200 meter roll, depending on pipe diameter. PE pipe are ued for everal application in the drainage and water olution ytem. PE i well known for it highreitance to chemical, acid and other abraiive ubtence. Haykal Plat manufacture HDPE 100 and HDPE 80 pipe pecifically for potable water ue. HDPE pipe have everal propertie that make them well uited for, and eay to ue in, potable water ytem. Haykal Plat alo manufacture LDPE pipe according to DIN 8072/8073 for potable water ue and irrigation. Siter Companie Haykal Group SCS. i a iter company of Haykal Plat, it deal mainly in importing anitary product Haykal Group today i the agent of ome of bet European & Turkih brand. It ditribute PPR Pipe and fitting for both hot and cold water. Pvc fitting from Germany according to EN1401 Standard for drainage and ewer ytem. Iolation and Inulation Sytem for Pipe. Iron malleable fitting for Pipe. And many other Product Mia plat wa founded in It manufacture all kind of injection moulding product. It primary work today i manufacturing PVC Fitting for drainage ytem according to EN1329 Standard. Mia Plat provide the Lebanee Market with the bet quality Product, comparable to European Product. Alo Mia Plat ha a very good reputation today in the Lebanee Market where it i in high demand. 1 Polyethylene (PE) Pipe

3 HDPE Pipe Propertie Intallation HDPE 100 i a trong material developed a reult of long tudie and reearch. It i reitant to high preure. The thickne of it wall i thinner than thoe of PE 32, PE 40, PE 63 and PE 80 while having the ame operating preure and outer diameter. Thi property of PE 100 allow for a bigger inner pipe diameter, hence allowing for the ame water flow a the other PE type while aving raw material. PE pipe are eay to ue and flexible in the ene that they can be intalled above ground (without digging) a well a below ground. Yield trength of HDPE i approximately 1/50 that of DI or teel and 1/5 that of PVC. Modulu of Elaticity of HDPE i much lower than other pipe material, which mean it i not a rigid. Low coefficient of friction mean HDPE i very lick. Thi make it eay for fitting to rotate on the pipe or migrate along it. Eae of handling due to flexibility and light weight Chemical reitance Long life with low operational cot At both the end of HDPE Pipe, GI nipple i fitted for lowering the pump inide bore by uing oil immerion method. The pipe i bolted down for further afety. Uing a flange to flange joint, one ide of pipe i fitted with ubmerible pump. Manufacturing Proce Polyethylene i a veratile material having outtanding mechanical and chemical propertie. It i obtained by the polymerization of ethylene ga in varying denitie ranging between to gr/cc. Phyical Propertie Denity ~ 952 kg/m 3 Melt Flow Index ~ 0.48 g/10 min Elongation at Break ~ 350 % Heat Reverion ~ < 5.0 % Polyethylene (PE) Pipe 2

4 HDPE 100 Pipe Table d Outide Diameter SDR 26 (PN 6) SDR 17 (PN 10) SDR 13.6 (PN 12.5) SDR 11 (PN 16) SDR 9 (PN 20) SDR 7.4 (PN 25) Coil/Pipe Length (m) All dimenion are in mm. : Wall Thickne HDPE 100 pipe dimenion are baed on DIN tandard EN The preure indicated above i given at 20 o C. Other ize and diameter are available upon requet. Haykal Plat provide HDPE 100 pipe in both blue and black color. For different color, pleae contact Haykal Plat. 3 Polyethylene (PE) Pipe

5 HDPE 80 Pipe Table d Outide Diameter SDR 17 (PN 8) SDR 13.6 (PN 10) SDR 11 (PN 12.5) SDR 9 (PN 16) SDR 7.4 (PN 20) SDR 6 (PN 25) Coil/Pipe Length (m) All dimenion are in mm. : Wall Thickne HDPE 80 pipe dimenion are baed on DIN tandard EN The preure indicated above i given at 20 o C. Other ize and diameter are available upon requet. Haykal Plat provide HDPE 80 pipe in both blue and black color with 4 blue tripe. For different color, pleae contact Haykal Plat. Polyethylene (PE) Pipe 4

6 Storage & Tranportation When loading HDPE/LDPE pipeline on the vehicle, care hould be taken to avoid impact and enure the vehicle board i free from any harp object like nail, cope iron, etc. While in tranit, pipeline hould be well ecured and well upported over the entire length of the pipeline. Where mechanical handling i employed, metal ling, hook and chain mut not come into direct contact with the pipeline. Pipeline hould be given adequate upport at all time and hould be tacked on a flat urface free from any harp object. Small diameter pipeline can be eaily carried without the ue of auxiliary equipment. Small diameter pipeline can be manually placed in the trench. Pipeline in larger diameter may neceitate either a pecial lifting bar or a ling; alway ue at leat 2 ling. Avoid poitioning pipeline or coil next to an exhaut ytem and other heat ource. Avoid placing any heavy load on top of pipeline. WARNING: DO NOT DRAG THE PIPELINE ACROSS THE GROUND AND AVOID SHARP EDGES. 5 Polyethylene (PE) Pipe

7 Compreion Fitting 16 Bar A tandard compreion fitting can be utilized to joint a PE pipeline. The compreion fitting are manufactured utilizing PolyPropylene (PP) material uitable for ue in contact with drinking water. The joint are contructed from a body and a lock-nut made from PolyPropylene, a Gaket made from Nitric Rubber of a hardne of 75, and a Locking ring made from white Polyacetal uitable at a maximum temperature of 10 o C, and at a nominal preure of PN 16 and PN 10 at 20 o C. Specification Applied tandard: Deign: ISO 14236: Size: MSZ EN ISO 3126:2005 Pull out reitance: MSZ EN 712:1995 Reitance to internal preure when ubject i bended: MSZ EN 713:1995 Reitance to internal preure (1 hour): MSZ EN 715:1995 Reitance to internal preure (1000 hour): MSZ EN ISO 13846:2001; MSZ EN ISO 1167:2006 Reitance to external water preure: MSZ EN 911:1997 Marking: ISO 14236: Effect to water quality: according to the national regulation Field of ue: Etablih mechanical bond between the part of buried PE or metal pipe ytem, making connection between tandardized PE-PE or PE-metal pipe. Available diameter: Ø20 - Ø110 mm Preure reitance on 20oC: DN20-75: PN 16 Bar DN90-110: PN 10 Bar PP compreion male connection PP compreion connection PP compreion end cap PP compreion female elbow PP compreion female connection PP compreion reducing connection PP compreion male elbow PP compreion elbow PP compreion tee connection PP compreion clamp addle PP compreion male tee connection PP compreion female tee connection Polyethylene (PE) Pipe 6

8 Butt-Fuion Jointing In thi jointing technique the two pipe end are clamped in a hydrolic moving carriage which provide a bai for a number of econdary operation, a follow: The pipe end are trimmed o that they are clean, and o that when brought together or aligned there hould be no viible gap or tep between them. The pipe end are then heated imultaneouly againt a double-ided flat heater plate for a pecific time and at a pecific preure, depending on pipe diameter. Thi tage generally include a oak phae with heat continuing to be applied but with virtually no preure, to enure the pipe aborb enough heat to provide a ecure joint. Following the heating cycle, the end are brought together, again under preure, to form a complete joint. After a pecific cooling time, the Butt-Fuion machine i removed, for aembly onto the next joint. (In hotter climate, it i recommended that the cooling time are doubled). The cooled joint hould be inpected for bead ize and cleanline. De-beading of the joint provide an additional mean of aeing joint quality. Butt-Fuion jointing provide an ideal method for ize-to-ize replacement work, giving maximum poible capacity in new pipe within exiting line. Electro-Fuion Jointing Electro-Fuion fitting work on the principle of an integral electrical heating coil or mat. When energized, thi heat the adjacent material which expand cauing the fitting to be fully fued to the pipe. Thee fitting are energized uing a 40V electro-fuion control box; jointing hould be carried out uing the appropriate pipe clamp. It i important that a uitable 3KVa generator be ued to power the control box on ite. When jointing pipe with electro-fuion ocket fitting, there are a number of baic tep to follow to enure ound joint: Pipe end mut be cut quare and de-burred. Depth of entry mark mut be clearly indicated on pipe. The required urface mut be clean and dry and thoroughly craped. The correct ize pipe alignment clamp mut be ued to avoid movement during fuion. The correct fuion time and cooling period mut be oberved. (In hotter climate it i recommended that the cooling time are doubled). Fitting mut be left in their bag until immediately prior to jointing. The performance of the fuion indicator mut be oberved and noted. 7 Polyethylene (PE) Pipe

9 Quality Certification IRI Certified LAB Report Polyethylene (PE) Pipe 8

10 Addre: Indutrial Zone, Zouk Mobeh, LEBANON. P.O.Box: LEBANON Telephone: Fax: Mobile: haykalplat@haykalplat.com webite: Deigned by: tel: web:

Polyethylene (PE) pipes Dimensions

Polyethylene (PE) pipes Dimensions DEUTSCHE NORM Augut 1999 Polyethylene (PE) pipe Dimenion { 8074 ICS 23.040.20 Rohre au Polyethylen (PE) PE 63, PE 80, PE 100, PE HD Maße Superede September 1987 edition. In keeping with current practice