Size Part No Wrench Size 1/ /16 5/ /2 3/ /16 7/ /16 1/ /4

Transcription

1 USS Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi, Proof load: 120,000 psi Rockwell hardness: C33 to C39 Manufactured in U.S.A. & Canada Plating: Yellow Zinc Dichromate for resistance to rust & corrosion 1/4-20 5/ /8-16 7/ /2-13 1/ / / / / / / / / / / Wrench 7/16 1/2 9/16 11/16 3/4 USS Alloy Hex Nuts-Grade 8 Part No Wrench 1/ /16 5/ /2 3/ /16 7/ /16 1/ /4 Alloy Washers-Grade 8 USS Flat Washer Lock Washer SAE Flat Washer Extra Thick Washer 1/ / / / /

2 USS Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi, Proof load: 120,000 psi Rockwell hardness: C33 to C39 Manufactured in U.S.A. & Canada Plating: Yellow Zinc Dichromate for resistance to rust & corrosion 9/ /8-11 3/4-10 7/8-9 1"-8 1/2 3/ / / / / / / / / / Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 USS Alloy Hex Nuts-Grade 8 9/ /8-11 3/4-10 7/ Part No Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 Alloy Washers-Grade 8 USS Flat Washer Lock Washer SAE Flat Washer Extra Thick Washer 9/ / / /

3 Large Diameter USS Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi Proof load: 120,000 psi Rockwell hardness: C33 to C39 Plating: Yellow Zinc Dichromate for resistance to rust & corrosion Manufactured in USA & Canada 1-1/ / / /2 1-3/ /4 2-1/2 2-3/ / / / Wrench 1-11/16 1-7/8 2-1/4 USS Alloy Hex Nuts-Grade 8 1-1/ / /2-6 Part No Wrench 1-11/16 1-7/8 2-1/4 USS Alloy Flat Washers-Grade 8 1-1/8 1-1/4 1-1/2 Part No Inside Dia. 1-1/4 1-3/8 1-5/8 Outside Dia. 2-3/ /2 Alloy Lock Washers- Grade 8 1-1/8 1-1/4 1-1/2 Part No Inside Dia. 1-1/4 1-3/8 1-5/8 Outside Dia. 2-3/ /2 2-3

4 SAE Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi, Proof load: 120,000 psi Rockwell hardness: C33 to C39 Manufactured in USA & Canada Plating: Yellow Zinc Dichromate for resistance to rust & corrosion 1/4-28 5/ /8-24 7/ /2-20 1/ / / / / / / / / / / Wrench 7/16 1/2 9/16 11/16 3/4 SAE Alloy Hex Nuts - Grade 8 1/4-28 5/ /8-24 7/ /2-20 Part No Wrench 7/16 1/2 9/16 11/16 3/4 Alloy Washers - Grade 8 SAE Flat Washer Lock Washer USS Flat Washer Extra Thick Washer 1/ / / / /

5 SAE Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi, Proof load: 120,000 psi Rockwell hardness: C33 to C39 Manufactured in USA & Canada Plating: Yellow Zinc Dichromate for resistance to rust & corrosion 9/ /8-18 3/4-16 7/8-14 1"-14 1/2 3/ / / / / / / / / / Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 SAE Alloy Hex Nuts - Grade 8 9/ /8-18 3/4-16 7/ Part No Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 SAE Alloy Flat Washers - Grade 8 SAE Flat Washer Lock Washer USS Flat Washer Extra Thick Washer 9/ / / /

6 Large Diameter Hex Cap Screws-Grade 8 Manufactured in accordance with SAE J429 Grade 8 Made from alloy steel, oil quenched and tempered Minimum tensile strength: 150,000 psi Proof load: 120,000 psi Rockwell hardness: C33 to C39 Plating: Yellow Zinc Dichromate for resistance to rust & corrosion Manufactured in USA & Canada 1-1/ / / /2 1-3/ /4 2-1/2 2-3/ / / / Wrench 1-11/16 1-7/8 2-1/4 SAE Alloy Hex Nuts - Grade 8 1-1/ / /2-12 Part No Wrench 1-11/16 1-7/8 2-1/4 SAE Alloy Flat Washers - Grade 8 1-1/8 1-1/4 1-1/2 Part No Inside Dia. 1-1/4 1-3/8 1-5/8 Outside Dia. 2-3/ /2 Alloy Lock Washers- Grade 8 1-1/8 1-1/4 1-1/2 Part No Inside Dia. 1-1/4 1-3/8 1-5/8 Outside Dia. 2-3/ /2 2-6

7 USS Hex Cap Screws-Grade 5 Manufactured in accordance with SAE J429 Grade 5 Made from medium carbon steel, oil quenched and tempered Tensile strength: 1/4" to 1" diameter 120,000 psi; over 1" 105,000 psi Proof load: 1/4" to 1" diameter 85,000 psi; over 1" 74,000 psi Rockwell hardness: 1/4" to 1" diameter C25 to C34; over 1" C19-C30 Manufactured in U.S.A. & Canada Plating: Clear Zinc Chromate for resistance to rust & corrosion 1/4-20 5/ /8-16 7/ /2-13 1/ / / / / / / / / / / Wrench 7/16 1/2 9/16 11/16 3/4 USS Finished Hex Nuts-Grade 5 1/4-20 5/ /8-16 7/ /2-13 Part No Wrench 7/16 1/2 9/16 11/16 3/4 Washers - Grade 5 USS Flat Washer Lock Washer SAE Flat Washer Fender Washer 1/ / / / /

8 USS Hex Cap Screws-Grade 5 Manufactured in accordance with SAE J429 Grade 5 Made from medium carbon steel, oil quenched and tempered Tensile strength: 1/4" to 1" diameter 120,000 psi; over 1" 105,000 psi Proof load: 1/4" to 1" diameter 85,000 psi; over 1" 74,000 psi Rockwell hardness: 1/4" to 1" diameter C25 to C34; over 1" C19-C30 Manufactured in U.S.A. & Canada Plating: Clear Zinc Chromate for resistance to rust & corrosion 9/ /8-11 3/4-10 7/8-9 1"-8 1/2 3/ / / / / / / / / / Wrench 7/8 15/16 1-1/8-5/16 1-1/2 USS Finished Hex Nuts-Grade 5 9/ /8-11 3/4-10 7/ Part No Wrench 7/8 15/16 1-1/8-5/16 1-1/2 Washers - Grade 5 USS Flat Washer Lock Washer SAE Flat Washer 9/ / / /

9 SAE Hex Cap Screws-Grade 5 Manufactured in accordance with SAE J429 Grade 5 Made from medium carbon steel, oil quenched and tempered Tensile strength: 1/4" to 1" diameter 120,000 psi; over 1" 105,000 psi Proof load: 1/4" to 1" diameter 85,000 psi; over 1" 74,000 psi Rockwell hardness: 1/4" to 1" diameter C25 to C34; over 1" C19-C30 Manufactured in U.S.A. & Canada Plating: Clear Zinc Chromate for resistance to rust & corrosion 1/4-28 5/ /8-24 7/ /2-20 1/ / / / / / / / / / / Wrench 7/16 1/2 9/16 11/16 3/4 SAE Finished Hex Nuts-Grade 5 1/4-28 5/ /8-24 7/ /2-20 Part No Wrench 7/16 1/2 9/16 11/16 3/4 Washers - Grade 5 SAE Flat Washer Lock Washer USS Flat Washer Fender Washer 1/ / / / /

10 SAE Hex Cap Screws-Grade 5 Manufactured in accordance with SAE J429 Grade 5 Made from medium carbon steel, oil quenched and tempered Tensile strength: 1/4" to 1" diameter 120,000 psi; over 1" 105,000 psi Proof load: 1/4" to 1" diameter 85,000 psi; over 1" 74,000 psi Rockwell hardness: 1/4" to 1" diameter C25 to C34;over 1" C19-C30 Manufactured in U.S.A. & Canada Plating: Clear Zinc Chromate for resistance to rust & corrosion 9/ /8-16 3/4-16 7/8-14 1"-14 1/2 3/ / / / / / / / / / Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 SAE Finished Hex Nuts-Grade 5 9/ /8-18 3/4-16 7/ Part No Wrench 7/8 15/16 1-1/8 1-5/16 1-1/2 Washers - Grade 5 SAE Flat Washer Lock Washer USS Flat Washer 9/ / / /

11 Cap Screw and Bolt Thread Chart (Actual size) U.S.S. S.A.E. 2-11

12 Cap Screw and Bolt Thread Chart (Actual size) U.S.S. S.A.E. 2-12

13 Carriage Bolts - Grade 2 USS fully threaded zinc plated 3/16 1/4 5/16 3/8 1/2 5/8 1/ / / / / / / / / Use Finished Hex Nuts -Grade 5 3/ /4-20 5/ /8-16 1/2-13 5/8-11 Part No Wrench 7/16 1/2 9/16 3/4 15/16 Shaker Screen Bolts - Grade 5 USS fully threaded, black oil finish 1/2 5/8 3/4 1-1/ / / / / / Use 2-H Heavy Hex Nut Part No

14 Shaker Screen Bolts - Grade 8 USS fully threaded, black oil finish 1/2 5/8 3/4 1-3/ / / / Use 2-H Heavy Hex Nut Part No

15 Flat Head Plow Bolts Gr 5 - No. 3 Head - UNC-2A 1038 High Carbon Steel Flat Head, Countersunk Square shoulder 3/8 7/16 1/ / / / / / Use 2H Heavy Full Hex Nuts 3/8 7/16 1/2 Part No Dome Head Plow Bolts Gr 8 - No. 3 Head - UNC-2A Alloy Steel, Dome Countersunk Head, Square Shoulder 5/8 3/4 7/8 1" / / / / Use 2H Heavy Full Hex Nuts 5/8 3/4 7/8 1" Part No Hex Flange Bolts - Grade 8 Specifically designed for frame bolting applications 3/8-16 1/2-13 5/8-11 3/ / / Hex Flange Nuts - Grade 8 3/8-16 1/2-13 5/8-11 3/4-10 Part No

16 Elevator Bolts Square Neck No 1 Flat countersunk head 1/4 5/16 3/ / / / Step Bolts Square Neck No. 2 Oval Head 1/4 5/16 3/ / / / Tap Bolts-Grade 2 USS Fully threaded Used in light duty, low stress application 1/4 5/16 3/8 1/2 1-1/ / / /

17 Alloy Hex Nuts-Grade 8 For use with SAE J 429 Grade 8 Cap Screws Meets Specification J-995, Class UN-2B threads Fully chamfered for positive wrenching Plating: Yellow Zinc Dichromate for resistance to rust & corrosion Thread USS Part No Thread SAE Part No Wrench 1/ / /16 5/ / /2 3/ / /16 7/ / /16 1/ / /4 9/ / /8 5/ / /16 3/ / /8 7/ / / /2 1-1/ / /16 1-1/ / /8 1-1/ / /4 Finished Hex Nuts-Grade 5 For use with SAE J 429 Grade 5 Cap Screws, Meets Specification J-995 Class UN-2B threads Fully chamfered for positive wrenching Plating: Clear Zinc Dichromate for resistance to rust & corrosion Thread USS Part No Thread SAE Part No Wrench 1/ / /16 5/ / /2 3/ / /16 7/ / /16 1/ / /4 9/ / /8 5/ / /16 3/ / /8 7/ / / /2 1-1/ / /16 1-1/ / /8 1-1/ / /4 2-H Heavy Hex Nuts Meets ASTM H specifications Heat treated to withstand temperatures to 1100 o F Designed for use with A193 B-7 studs and rod USS-Coarse Thread 1/4-20 5/ /8-16 7/ /2-13 9/ /8-11 3/4-10 7/ Part No

18 Prevailing Torque Locknuts- Stover Type One piece all metal design -for use with Grade 8 Cap Screws and B-7 Studs Proof Stress 150,000 PSI withstands severe vibration and shock Meets or exceeds IFI & ANSI specifications for class C Reusable- retains locking torque up to 5 reuses Thread USS Part No Thread SAE Part No Wrench 1/ / /16 5/ / /2 3/ / /16 7/ / /16 1/ / /4 9/ / /8 5/ / /16 3/ / /8 7/ / / /2 Grade 8 Nylon Insert Lock Nuts Locks uniformly over entire range of bolt thread Reusable many times will not damage bolt threads Positive locking action resists vibration Thread USS Part No Wrench 1/ /16 5/ /2 3/ /16 7/ /16 1/ /4 9/ /8 5/ /16 3/ /8 7/ / /2 Flange Lock Nuts - USS Designed for use with Grade 8 flange frame bolts A193 B-7 studs grade 2 Part No 3/ / / /

19 Keps Nuts Free spinning lock washer attached, positive locking, speedy assembly For use with machine screws Part No / Nylon Insert Lock Nuts Locks uniformly over entire range of bolt thread Reusable many times will not damage bolt threads Positive locking action resists vibration Thread USS Part No Thread SAE Part No Wrench 6/ / / / / / / /16 5/ / /2 3/ / /16 7/ / /16 1/ / /4 9/ / /8 5/ / /16 3/ / /8 7/ / / / Serrated Flange Nuts For use with machine screws Grade 2 Part No / / /

20 Hi- Nuts - SAE Meets SAE J-482A specifications Hardened for higher torque and tensile strength Designed for use with spring center bolts and U-bolts Part No 3/ / / / / / / Castle Nuts- SAE Machine chamfered corners and clean cut slots Hardened for higher torque and tensile strength Designed for use anywhere locking pins are used Part No 1/ / / / / / / / / Jam Nuts Meets Specification J-995 Class UN-2B threads Fully chamfered for positive wrenching Thread USS Part No Thread SAE Part No Wrench 1/ / /16 5/ / /2 3/ / /16 7/ / /16 1/ / /4 9/ / /8 5/ / /16 3/ / /8 7/ / / /2 2-20

21 Wing Nuts - USS Forged steel for extra strength and holding power 100% stronger than die cast /4-20 5/ /8-16 7/ /2-13 Part No Acorn Nuts - USS Dome cover gives neat appearance & prevents snagging Burr free 1/4-20 5/ /8-16 7/ /2-13 Part No Vandlgard Nuts Universal security nut that protects highway signs Can be used on wood, metal, and cement posts Uses standard wrenches for installation Controlled clamping action, prevents damage to the sign surface Non-ferrous material protects against rust & discoloration 1/4-20 5/ / Material Aluminum Zinc Aluminum Break off Torque In/Lb In/Lb In/Lb. Square Inset Nylon Washer Nylon Backup Washer

22 Alloy Flat Washers-Grade 8 Designed for use with Grade 8 Cap Screw Prevents fastener failure due to improper seating on irregular surfaces Thru hardened to C for maximum strength; will not bend or dish Plating: Yellow Zinc Dichromate for resistance to rust & corrosion USS Part No Inside Dia. Outside Dia. SAE Inside Dia. Outside Dia. 1/ /16 3/ /32 3/4 5/ /8 7/ /32 7/8 3/ / /32 1 7/ /2 1-1/ /32 1-1/4 1/ /16 1-3/ /32 1-3/8 9/ /8 1-1/ /32 1-1/2 5/ /16 1-3/ /32 1-3/4 3/ / /16 2 7/ /16 2-1/ /16 2-1/ /16 2-1/ /16 2-1/2 1-1/ /4 2-3/ /4 2-3/4 1-1/ / / / /8 3-1/ /8 3-1/2 Alloy Heavy Duty Extra Thick SAE Flat Washers-Grade 8 Designed for use with Grade 8 Cap Screws Prevents fastener failure due to improper seating on irregular surfaces Thru hardened for maximum strength; eliminates the chance of belling, splitting or dishing out Plating: Yellow Zinc Dichromate for resistance to rust & corrosion Inside Dia Outside Dia. Thickness 1/ /32 5/ / /32 11/ / /32 13/ / /32 15/ / /32 1-1/ / /32 1-3/ / /32 1-5/ / /16 1-1/ / /16 1-3/ /

23 Alloy Lock Washers- Grade 8 Designed for use with Grade 8 Cap Screw Meets or exceeds ASTM specifications Prevents fastener failure due to cracking, braking, warping or loss of tension Yellow Dyko plating resists rust and corrosion Part No Inside Dia. Outside Dia. 1/ /16 3/4 5/ /8 7/8 3/ /16 1 7/ /2 1-1/4 1/ /16 1-3/8 9/ /8 1-1/2 5/ /16 1-3/4 3/ /16 2 7/ /16 2-1/ /16 2-1/2 1-1/ /4 2-3/4 1-1/ / / /8 3-1/2 2-23

24 Flat Washers- Grade 5 Designed for use with Grade 5 Cap Screw, Meets or exceeds ASTM F 844 Prevents fastener failure due to improper seating on irregular surfaces Distributes load over a large area to minimize dishing Plating: Clear Zinc Dichromate for resistance to rust & corrosion USS Part No Inside Dia. Outside Dia. SAE Inside Dia. Outside Dia. 1/ /16 3/ /32 5/8 5/ /8 7/ /32 11/16 3/ / /32 13/16 7/ /2 1-1/ /32 15/16 1/ /16 1-3/ /32 1-1/16 9/ /8 1-1/ /32 1-3/16 5/ /16 1-3/ /32 1-5/16 3/ / /16 1-1/2 7/ /16 2-1/ /16 1-3/ /16 2-1/ / / /4 2-3/ /4 2-3/4 1-1/ / / / /8 3-1/ /8 3-1/2 Fender Washers Designed for applications requiring large bearing surfaces Thin gauge steel, extra large outside diameter Outside Dia. 3/ " 1/ /4 5/ /2 3/ /2 1/

25 Regular Split Lock Washers Designed for use with Grade 5 Cap Screw Prevents fastener failure due to cracking, braking, warping or loss of tension Part No Inside Dia. Outside Dia. 1/ /16 3/4 5/ /8 7/8 3/ /16 1 7/ /2 1-1/4 1/ /16 1-3/8 9/ /8 1-1/2 5/ /16 1-3/4 3/ /16 2 7/ /16 2-1/ /16 2-1/2 1-1/ /4 2-3/4 1-1/ / / /8 3-1/2 2-25

26 SAE Flat Washers 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 USS Flat Washers 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/

27 Internal & External Lock Washer Made of carbon steel for strength and flexibility Locking teeth firmly hold assemblies to bearing surface Ideal for fastening application subject to shock, vibration or temperature variation Internal Part Number External Part Number Internal/External Part Number Countersunk Tooth Part Number # # # / / / / / / / Copper Washers Superior corrosion resistance Excellent electrical conductivity Designed for use as a gasket to seal fastener threads or as a bushing between terminations or under fastener heads USS Washers SAE Washers Part No Outside Dia Part No Outside Dia 1/ /8 1/ /16 5/ /16 5/ /2 3/ /4 3/ /16 7/ /16 7/ /8 1/ /8 1/ /16 Cylinder Stud Washers Part No Outside Dia Thickness 3/ /16 5/32 7/ /8 5/32 1/ /32 Countersunk Finishing Washers Part No # # # #

28 Alloy Steel Socket Head Cap Screws - USS Coarse Alloy steel - 180,000 PSI Black with oil dipped finish ASA 1960 series specifications Conforms to ANSI B18.3 4/40 6/32 8/32 10/24 1/4-20 5/ /8-16 7/ /2-13 5/8-11 3/4-10 1/ / / / / / / / / / Key 3/32 7/64 9/64 5/32 3/16 1/4 5/16 3/8 3/8 1/2 5/8 Alloy Steel Socket Head Cap Screws - SAE Fine 10/32 1/4-28 5/ /8-24 1/2-20 3/ / / / / / / / Key 5/32 3/16 1/4 5/16 3/8 High Collar Lock Washers O.D. of the Lock Washer is the same O.D. as the head of Socket Cap Screw Part No # # # # / / / / / / /

29 Alloy Flat Head Socket Cap Screws ASTM F-835 Class 3A Threads Designed for flush fastening of plates, strips, mouldings and other thin section parts Uniform 82 o countersink under head for maximum side wall contact Alloy steel RC 38-45, 190,000 psi tensile Coarse Thread 4/40 6/32 8/32 10/24 1/ / / / / / Key 1/16 5/64 3/32 1/8 1/4-20 5/ /8-16 1/2-13 1/ / / / / Key 5/32 3/16 7/32 5/16 Fine Thread 1/4-28 5/ /8-24 1/2-20 1/ / / / Key 5/32 3/16 7/32 5/16 Button Head Socket Cap Screw - USS Coarse Ideal for safe low profile fastening of metal parts too thin for countersinking Alloy steel - Rockwell Conforms to ANSI B18.3 Black with oil dipped finish 4/40 6/32 8/32 10/24 10/32 1/4-20 5/ /8-16 1/ / / / / / Key 1/16 5/64 3/32 1/8 1/8 5/32 3/16 7/

30 Socket Head Shoulder Screws ANSI/ASME B Thread Class 3A Use anywhere stripper bolts are used as part of a die spring assembly or anywhere a fastener must pass through a sleeve or bushing to thread Shoulder Shoulder Diameter Length 1/4 5/16 3/8 1/2 5/8 3/ / / / / / / / / Thread Dia /4-20 5/ /8-16 1/2-13 Length 3/8 7/16 1/2 5/8 3/4 Key 1/8 5/32 3/16 1/4 5/16 Socket Set Screws Cup Point - UNC Coarse Thread ASTM F-912 Designed to stay tight longer even under severe shock and vibration Cup point gives smooth even penetration for maximum holding power against side thrust and torsion Precision Heat Treated Alloy Steel Fully Formed Class 3A Threads 4/40 6/32 8/32 10/24 1/4-20 5/ /8-16 1/2-13 5/8-11 3/ / / / / / / / / Key.050 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16 Socket Set Screws Cup Point - UNF Fine Thread ASTM F /32 1/4-28 5/ /8-24 1/ / / / / Key 3/32 1/8 5/32 3/

31 TOOLS Hex Keys High grade alloy steel Heat treated to obtain optimum strength Key Short Arm Key Long Arm Key T-Handle 6" Molded Key Application Socket Set Socket Cap 5/ #8 #3, #4 3/ #10 #5, #6 1/ /4 #8 5/ /16 #10 3/ /8 1/4 7/ /16 5/16 1/ /2 3/8 5/ /8 7/16 3/ /4 1/2 Long Arm Hex Keys Long Arm Hex Keys In A Molded Plastic Case. Keeps Keys In Order For Quick Identification Part No Type s Fractional.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 1/4, 5/16, 3/ Metric 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Hex Key Sets Part No Type s Fractional.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/ Metric 2, 2.5, 3, 4, 5, 6, 8 Molded T-handle Hex Keys Part No Type s Fractional 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/ Metric 2, 2.5, 3, 4, 5, 6, 8,

32 TOOLS Ball Driver L-Wrenches Faster, easier maintenance and assembly Angle entry to 25 o works in hard to reach areas, reduces stripping problems by allowing full depth entry Ergonomic design allows natural hand and wrist rotation, reduces user fatigue Industrial quality hardened blades Part Number Key Application Key Long Arm T-handle Socket Set Socket Cap 5/ #8 #3,#4 3/ #10 #5,#6 1/ /4 #8 5/ /16 #10 3/ /8 1/4 7/ /16 5/16 1/ /2 3/8 5/ /8 7/16 3/ /4 1/2 Long Arm Ball Drivers In A Molded Plastic Case s , 1/16, 5/64, 3/32, 7/64,1/8, 9/64, 5/32, 3/16, 1/4, 5/16, 3/8 Ball Driver Set Part No s /16, 7/32, 1/4, 5/16, 3/8 Molded T-handle Hex Keys Part No s , 1/16, 5/64, 3/32, 7/64,1/8, 9/64, 5/32, 3/16, 1/4, 5/16, 3/8 2-32

33 Steel Machine Screws Made from hardened quality steel, plated to resist rust and corrosion Deep twist resistant slots, clean sharp Class 2A threads Slotted Round* Slotted Flat* Slotted Fillister Phillips Flat Phillips Pan Phillips Oval 4/40 x 1/ /40 x 3/ /40 x 1/ /40 x 3/ /40 x /32 x 1/ /32 x 3/ /32 x 1/ /32 x 5/ /32 x 3/ /32 x /32 x 1-1/ /32 x 1-1/ /32 x /32 x 2-1/ /32 x 1/ /32 x 3/ /32 x 1/ /32 x 5/ /32 x 3/ /32 x /32 x 1-1/ /32 x 1-1/ /32 x /32 x 2-1/ /32 x /24 x 1/ /24 x 3/ /24 x 1/ /24 x 5/ /24 x 3/ /24 x /24 x 1-1/ /24 x 1-1/ /24 x 1-3/ /24 x /24 x 2-1/ /24 x /24 x /24 x *Slotted to be replaced with combo heads. If slotted is required, please note. 2-33

34 Steel Machine Screws Made from hardened quality steel, plated to resist rust and corrosion Deep twist resistant slots, clean sharp Class 2A threads Slotted Round* Slotted Flat* Slotted Fillister Phillips Flat Phillips Pan Phillips Oval 10/32 x 1/ /32 x 3/ /32 x 1/ /32 x 5/ /32 x 3/ /32 x /32 x 1-1/ /32 x 1-1/ /32 x 1-3/ /32 x /32 x 2-1/ /32 x /24 x 1/ /24 x 3/ /24 x /24 x 1-1/ /24 x 1-1/ /24 x 1-3/ /24 x /4x 1/ /4 x 5/ /4 x 3/ /4 x /4 x 1-1/ /4 x 1-1/ /4 x 1-3/ /4 x /4 x 2-1/ /4 x /4 x 3-1/ /4 x *Slotted to be replaced with combo heads. If slotted is required, please note. Steel Machine Screw Truss Head Slotted Part Number 10/24 x 1/ /24 x 3/ /24 x /4-20 x 1/ /4-20 x 5/ /4-20 x 3/ /4-20 x

35 Stove Bolts Supplied without nuts Zinc plated to resist rust & corrosion Round Head Flat Head 3/16 (10-24) 1/4 5/16 3/8 3/16 (10-24) 1/4 5/16 3/8 1/ / / / / / Machine Screw Nuts Hex Keps Nylon Lock Wing 4/ / / / / / Machine Screw Washers Split Internal External Flat # # # # /

36 Steel Sheet Metal Screws Made from hardened quality steel threaded to the head Sharp Type A starter points Twist resistant slots and burr free threads Zinc plated to resist rust and corrosion Dia. Length Slotted Pan Head* Slotted Flat Head* Slotted Oval Head Phillips Pan Head # 4 1/ Phillips Flat Head # 4 3/ # 4 1/ Phillips Oval Head Slotted Hex Washer # 6 1/ # 6 3/ # 6 1/ # 6 5/ # 6 3/ # 6 7/ # # 6 1-1/ # 6 1-1/ # 6 1-3/ # # 8 1/ # 8 3/ # 8 1/ # 8 5/ # 8 3/ # 8 7/ # # 8 1-1/ # 8 1-1/ # 8 1-3/ # # 8 2-1/ # *Slotted to be replaced with combo heads. If slotted is required, please note. 2-36

37 Steel Sheet Metal Screws Made from hardened quality steel threaded to the head Sharp Type A starter points Twist resistant slots and burr free threads Zinc plated to resist rust and corrosion Dia. Length Slotted Pan Head* Slotted Flat Head* Slotted Oval Head Phillips Pan Head # 10 3/ Phillips Flat Head Phillips Oval Head Slotted Hex Washer # 10 1/ # 10 5/ # 10 3/ # 10 7/ # # / # / # / # # / # # 12 1/ # 12 5/ # 12 3/ # 12 7/ # # / # / # / # # / # # 14 1/ # 14 5/ # 14 3/ # 14 7/ # # / # / # / # # / # *Slotted to be replaced with combo heads. If slotted is required, please note. 2-37

38 Self Drilling Screws Drills, taps, and fastens in one operation Hardened steel point- like a twist drill eliminates need to drill holes separately Fasten metal to metal, wood, synthetics Zinc plated to resist rust and corrosion Drill should operate between 2,200 and 3,000 rpm for most applications Pan Head Phillips # 6 # 8 # 10 # 12 # 14 1/ / / / / Flat Head Phillips 1/ / / / / Hex Washer Head 1/ / / / / Hex Driver 1/4 5/16 5/16 3/8 Max Thickness.090 7/64 11/64 7/32 1/4 2-38

39 Modified Truss Head Self Drilling Screws Part Number #8 x 1/ #8 x 3/ #8 x #8 x 1-1/ Phillips Wafer Head Self Drilling Screws Part Number x 3/ x x 1-1/ Special Pan & Wafer Phillips Head Self Drilling Screws Part Number 6 x 7/ x 1-7/16 (w/reamer wings) Slotted Hex Washer Head Self- Piercing Screws Unique hardened needle point eliminates pre-drilling or punching in light gauge materials up to 16 gauge. Sharp crested thread prevents over-enlarging hole Zinc plated to resist rust and corrosion # 6 # 7 # 8 # 10 3/ / / Hex Driver 1/4 1/4 1/4 5/16 Magnetic Chuck No Slotted Hex Washer Head Type F 1/4 5/16 3/8 1/ / / Hex Driver 3/8 7/16 5/16 Magnetic Chuck No

40 Drywall Screws Countersinks in drywall without crushing or tearing paper facing Provides flat smooth surface for easy finishing Black phosphate finish for corrosion resistance Deep phillips recess allows for maximum bit penetration Phillips Bugle Head-Fine Thread # 6 # / / / / / / Phillips Bugle Head-Coarse Thread # 6 # / / / / Phillips Bugle Head-Self Drilling Point # 6 # 7 # / / / / / / Deck Screws - Square Drive Mechanical galvanized # 6 # 8 1-5/ /

41 Wood Screws Sharp gimlet point for easy starting Zinc plated to resist rust and corrosion Flat Head Slotted Flat Head Phillips Square Head # 6 x 1/ # 6 x 3/ #6x # 6 x 1-1/ # 6 x 1-1/ # 8 x 1/ # 8 x 3/ #8x # 8 x 1-1/ # 8 x 1-1/ # 8 x 1-3/ #8x # 8 x 2-1/ #8x # 10 x 1/ # 10 x 3/ # 10 x # 10 x 1-1/ # 10 x 1-1/ # 10 x 1-3/ # 10 x # 10 x 2-1/ # 10 x # 12 x 3/ # 12 x # 12 x 1-1/ # 12 x 1-1/ # 12 x 1-3/ # 12 x # 12 x 2-1/ # 12 x # 14 x # 14 x 1-1/ # 14 x 1-1/ # 14 x 1-3/ # 14 x # 14 x 2-1/ # 14 x #14 x

42 Hex Lag Screws Hex head for easier wrenching Sharp gimlet point for easy starting 1/4 5/16 3/8 1/ / / / / / Trailer Floor Screws- Type F Slotted Phillips Torx 1/4-20 x 1-1/ /4-20 x /4-20 x 2-1/ /4-20 x /4-20 x 3-1/

43 TOOLS Screwdrivers With Ergonomic Cushion Grip Hex blade, high alloy chrome-vanadium-molybdenum steel, hardened, chrome plated Hex bolster for additional torque Wiha-Chromtop finish on tips. Wiha-SoftFinish handle, multi-component Phillips Part No Shaft Length / 80mm / 100mm / 150mm Slotted Part No Shaft Length / 7/32 4 / 100mm / 1/4 5 / 125mm / 9/32 5 / 125mm / 5/16 6 / 150mm / 3/8 7 / 175mm Screwdriver Set Part No Description Includes: Slotted 7/32, 9/32, 5/16 Phillips 1 and

44 TOOLS ElecPlus-Screwdrivers Part No Tip Blade Length /32 4" /32 5" /4 6" /16 7" Part No Tip Blade Length #1 3" #2 4" Individually insulated blade and handle provide a double level of protection with all parts being inseparable. Large, ergonomically designed triangular handle with a unique, soft grip surface for higher torque and greater resistance to slipping. Blades are made of high alloy special steel with a burnished finish, for maximum strength. Handles and insulation are made of a highly shock proof cadmium free plastic. Individually examined and tested in water using 10,000 volts to ensure safety. Guaranteed safe to 1,000 volts. Examination also made under the new, more severe DIN EN and low temperature impact tested at minus 40 o C. Part No Description piece set: Slotted: 5/32 x 4, 7/32 x 5, 1/4 x 6, 5/16 x 7, Phillips : #1 x 3, #2 x 4 Magnetic Insulated 1/4" Bit Holder Screwdriver Insulated chrome-vanadium steel shaft, stainless steel bit holder, with impact resistant red cellulose acetate power handle. Rotatable bit holder and snap lock cap, includes: [3] Phillips, and [3] Slotted Bits Part No