DDR Series 9A Active Power Power Terminator for DDR Memories

Size: px
Start display at page:

Download "DDR Series 9A Active Power Power Terminator for DDR Memories"

Transcription

1 DDR Series A Active Power Power Terminator Typical unit FEATURES For high performance termination of DDR computer memory busses Compatible to JEDEC JESD and - DDR specifi cations Ideal for active wideband termination of SSTL- logic Non-isolated design with.v ± Amps output -.V input with % (typ.) effi ciency Miniature industry standard. x. x. inch surface mount or SIP package Offers unique source/sink DDR requirements plus automatic reference tracking Retains controlled impedances and minimizes distortion of DDR digital data and double-side clocks Operates over to + C with lfm airfl ow Standard vertical mount, optional horizontal mount Designed for efficient termination of SSTL- (Series Stub Terminated Logic) signals in DDR (Dual Data Rate) memories, the DDR series non-isolated DC/DC converters are powered by the bus supply of to. Volts and are compatible to industry-standard JEDEC JESD specifications for DDR memories. PRODUCT OVERVIEW The DDR terminators are supplied in a. by. inch surface-mount or SIP package measuring only. inches high. Full output power (.VIN) is available up to + Celsius with only LFM (linear feet per minute) of cooling airfl ow. No heatsink is required. Modern SSTL- logic uses reduced power voltages (typically. Volts), high switching currents and a relatively narrow voltage threshold window for logic switching. These factors contribute to the MHz data transfer rate. The Vtt termination voltage output of the DDR operates approximately at the midpoint voltage of the bus (i.e, about.v) and therefore will either source or sink current up to Amps. To maintain a reliable window in the logic threshold, the design tracks the Vref input voltage at high bandwidth, operating typically at one half the bus Vddq voltage of.v. In addition, the DDR series features a very high current slew rate of up to Amps per microsecond and fast settling while switching from source to sink or sink to source. These features insure no data errors on the memory bus. The DDR is supplied either in a vertical SIP (Single Inline Package) mount or a horizontal pinned mount. The converter meets UL -, CSA and IEC safety certifi cations and both conducted and radiated EMI (electromagnetic interference) specifi cations. The output is rated for continuous short circuit protection and the on-board controller will shut down the converter if the temperature reaches C or output current exceeds Amps. The DDR--WH-C is available with RoHS reduction of hazardous substance compliance. SIMPLIFIED SCHEMATIC For full details go to Typical topology is shown MDC_DDR Series.C Page of

2 A Active Power Power Terminator DDR MEMORY APPLICATION MECHANICAL SPECIFICATIONS. (.) HORIZONTAL MOUNT. (.) Case B INPUT/OUTPUT CONNECTIONS Pin Function P Pin Function P +Sense Input Common PLASTIC HEADER Sense Input Common On/Off Input Common +Input Output +Input Output +Input Output. (.) Common VREF Input. TYP (.). (.). (.).ر. (.). (.). (.) Component locations are typical. Actual units may vary slightly. COPPER LEADS Case B Dimensions in inches (mm) MDC_DDR Series.C Page of

3 Performance/Functional Specifications Typical at TA = + C under nominal line voltage, VOUT =.V, full-load conditions unless noted. Input Input Voltage Range to. Volts (.V nominal) Start-Up Threshold Volts min.,. Volts typ. Input Current, Current Sourcing Mode At.VIN,.VOUT. Amps max. At.VIN,.VOUT. Amps max. At VIN,.VOUT. Amps max. At VIN,.VOUT. Amps max. Inrush Transient.A /sec, maximum No-load Input Current ma typ., ma max. Short Circuit Current Amps Shut Down Mode Input Current ma Input Reflected Ripple Current map-p VREF Input Range. to.v VREF External Reference Current.μA (VREF min. to max., IOUT = ±A) Remote On/Off Control +Positive Logic Remote Sense Range Maximum Output Power Minimum Loading Maximum Capacitive Loading Output On = no connection, open collector or.v to +VIN max. applied at µa. Off = to.v or pulled low. + % of VOUT. Watts (VREF =.V) No minimum load μf, OSCON low-esr (.),μf (aluminum electrolytic) Output Voltage Accuracy VREF ±% Total Accuracy (Line, Load, Temp.) ±% Output Current, Source +. Amps maximum Output Current, Sink. Amps maximum Short Circuit Current Amps Short Circuit Duration Continuous, output shorted to ground Short Circuit Protection Fold back technique, autorecovery Current Limit Inception Amps, sourcing mode Transfer Characteristics Efficiency, Current Sourcing Mode, A load At.VIN,.VOUT % typ., % max. At.VIN,.VOUT % typ., % max. At VIN,.VOUT.% typ.,.% max. At VIN,.VOUT % typ., % max. Efficiency, Current Sinking Mode, A load At.VIN,.VOUT % typ., % max. At.VIN,.VOUT.% typ.,.% max. At VIN,.VOUT % typ., % max. At VIN,.VOUT.% typ.,.% max. Temperature Coefficient ±.%/ C Switching Frequency khz min., khz max. Line Regulation (VIN = min. to max.) ±.% Load Regulation (VIN = min. to max.) ±.% Output Slew Rate Load Step, to A Load Step Settling Time, to A Ripple and Noise, MHz bandwidth Turn-On Time (Remote On/Off or VIN to VOUT regulated) Dynamic Characteristics Amps/μsec mv, peak deviation μsec mvp-p, typical mvp-p, maximum.msec Input Voltage Input Reverse Polarity Output Current Ordering Guide Model Number DDR--W DDR--W-C DDR--WH DDR--WH-C DDR Series A Active Power Power Terminator Environmental Operating Temperature Range (Ambient) No derating, vertical mount to + lfm airfl ow Derating See derating curves PCB/Case Temperature Range to + C, no derating. Thermal Protection/Shutdown C Storage Temperature Range to + C Altitude to, feet Relative Humidity % to %, non-condensing Outline Dimensions Weight Pin Material Pin Dimensions Calculated MTBF Electromagnetic Interference Safety Physical, Safety. x. x. inches. x. x.mm. ounces (g) Nickel plate over copper alloy. inches (.mm) TBD hours Conducted (FCC part, EN) Radiated (FCC part, EN) UL/cUL -, CSA-C. No. IEC/EN - See Absolute Maximum Ratings for allowable input voltage. Input Ripple Current is tested and specifi ed over a - MHz bandwidth. Input fi ltering is CIN = µf, CBUS = µf, LBUS = µh. Current limit inception is given at either cold start-up or after warm-up for VREF =. or.v. Mean Time Before Failure is calculated using the Telecordia (Bellcore) SR- Method, Case, ground fi xed conditions, TCASE = + C, Full load. Absolute Maximum Ratings Vdc max., msec duration None Current-limited. Device can withstand indefi nite short circuit. Storage Temperature to + C Lead Temperature + C, seconds maximum Absolute maximums are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifi cations Table is not implied nor recommended. Mounting Single Inline Package (vertical), non-rohs Single Inline Package (vertical), RoHS compliant Horizontal mount, non-rohs Horizontal mounting, RoHS compliant MDC_DDR Series.C Page of

4 A Active Power Power Terminator Typical Performance Curves DDR--W Efficiency vs. Load Current (Current Sinking Mode, VOUT =.V) DDR--W Efficiency vs. Load Current (Current Sinking Mode, VOUT =.V) Efficiency (%) VIN =.V Efficiency (%) VIN =.V VIN = V VIN = V Load Current (Amps) Load Current (Amps) MDC_DDR Series.C Page of

5 A Active Power Power Terminator Typical Performance Curves DDR--W Maximum Current Temperature Derating (.VIN,.VOUT, Current Sourcing Mode) DDR--W Maximum Current Temperature Derating (.VIN,.VOUT, Current Sourcing Mode) lfm lfm lfm lfm lfm lfm lfm lfm DDR--W Maximum Current Temperature Derating (VIN,.VOUT, Current Sourcing Mode) DDR--W Maximum Current Temperature Derating (VIN,.VOUT, Current Sourcing Mode) lfm lfm lfm lfm lfm lfm lfm lfm Murata Power Solutions, Inc. Cabot Boulevard, Mansfi eld, MA - U.S.A. ISO and REGISTERED This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without notice. Murata Power Solutions, Inc. MDC_DDR Series.C Page of

OKI-78SR Series Fixed Output 1.5 Amp SIP DC/DC Converters

OKI-78SR Series Fixed Output 1.5 Amp SIP DC/DC Converters OKI-78SR Series Typical unit FEATURES Ultra wide 7 to 36 VDC input range Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps Vertical SIP-mount, small footprint package No heat sink direct replacement for 3-terminal

More information

OKR-T/30-W12-C Adjustable Output 30-Amp SIP-mount DC-DC Converters

OKR-T/30-W12-C Adjustable Output 30-Amp SIP-mount DC-DC Converters www.murata-ps.com OKR-T/30-W12-C Typical unit FEATURES 700 KHz operation 5.5-13.8 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC High power conversion effi ciency at 95% Outstanding

More information

OKI-78SR Series Fixed Output 1.5 Amp SIP DC/DC Converters

OKI-78SR Series Fixed Output 1.5 Amp SIP DC/DC Converters www.murata-ps.com OKI-78SR Series Typical units FEATURES Ultra wide 7 to 36 VDC input range Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps Vertical or horizontal SIP-mount, small footprint package No heat

More information

OKR-T/10-W12 Series Adjustable Output 10-Amp SIP-mount DC/DC Converters

OKR-T/10-W12 Series Adjustable Output 10-Amp SIP-mount DC/DC Converters www.murata-ps.com OKR-T/10-W12 Series Typical unit FEATURES 600 KHz operation 4.5-14 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC Drives up to 200 μf ceramic capacitive loads

More information

OKR-T/30-W12-1C Adjustable Output 30-Amp SIP-mount DC-DC Converters

OKR-T/30-W12-1C Adjustable Output 30-Amp SIP-mount DC-DC Converters www.murata-ps.com OKR-T/30-W12-1C Typical unit FEATURES 700 KHz operation 5.5-13.8 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC High power conversion effi ciency at 95% Outstanding

More information

TEP 200WIR Series, 180 240 Watt

TEP 200WIR Series, 180 240 Watt TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155

More information

SELECTION GUIDE. Nominal Input

SELECTION GUIDE. Nominal Input www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density

More information

Series AMLDL-Z Up to 1000mA LED Driver

Series AMLDL-Z Up to 1000mA LED Driver FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC

More information

www.murata-ps.com D1U54P-W-1200-12-HxxC Series 54mm 1U Front End AC-DC Power Supply Converter www.murata-ps.com/support PRODUCT OVERVIEW FEATURES

www.murata-ps.com D1U54P-W-1200-12-HxxC Series 54mm 1U Front End AC-DC Power Supply Converter www.murata-ps.com/support PRODUCT OVERVIEW FEATURES www.murata-ps.com PRODUCT OVERVIEW D1U54P-W-1200-12-HxxC Series The D1U54P-W-1200-12-HxxC series are 80 PLUS Platinum effi ciency 1200 watt, power factor corrected front end supplies with a 12V main output

More information

OKR-T/1.5-W12-C Adjustable Output 1.5-Amp SIP-mount DC/DC Converters

OKR-T/1.5-W12-C Adjustable Output 1.5-Amp SIP-mount DC/DC Converters www.murata-ps.com OKR-T/1.5-W12-C Typical unit FEATURES 600 KHz operation 4.5-14 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC High power conversion effi ciency at 93% Outstanding

More information

SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)

SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope) OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS

More information

Maximum Input Current Vin=18V, 100% Load 12.6 13.1 A

Maximum Input Current Vin=18V, 100% Load 12.6 13.1 A FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.3% @48Vin Intergrated fuse holder Parallel Connection

More information

CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters

CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V

More information

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual

More information

OKY-T/3,T/5-D12 Series Adjustable Output 3 and 5-Amp DOSA-SMT DC/DC Converters

OKY-T/3,T/5-D12 Series Adjustable Output 3 and 5-Amp DOSA-SMT DC/DC Converters www.murata-ps.com Typical unit PRODUCT OVERVIEW The OKY-T/3 and -T/5 series are miniature non-isolated Point-of-Load (POL) DC/DC power converters for embedded applications. The module is fully compatible

More information

Application Note TMA Series

Application Note TMA Series 1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x

More information

650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power

650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal

More information

DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output

DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output THN 20 Series Application Note DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless

More information

Lockout Hysteresis Voltage 1 2 3 VDC Maximum Input Current Vin=18V, 100% Load 13.0 13.5 A Vin=24V 180 220 ma

Lockout Hysteresis Voltage 1 2 3 VDC Maximum Input Current Vin=18V, 100% Load 13.0 13.5 A Vin=24V 180 220 ma FEATURES Ultra wide input voltage range, 18~106V 200W Output @ 18V~27V Vin range 300W Output @ 27~106V Vin range (Including 27V) Full Load Efficiency up to 91.0% @48Vin Intergrated fuse holder Parallel

More information

1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)

1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit) 000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,

More information

Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power

Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power Silvertel V1.1 November 2012 Datasheet Pb 1 Features IEEE802.3at and IEEE802.3af compliant Maximum 30W output power Dual In-Line (DIL) package size 50.6mm (L) x 30mm (W) Overload, short-circuit and thermal

More information

650W Single Output Power Supply

650W Single Output Power Supply AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent

More information

CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000

CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000 Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level

More information

S24SE/S24DE series 20W Single/Dual Output DC/DC Converter

S24SE/S24DE series 20W Single/Dual Output DC/DC Converter FEATURES Efficiency up to 88% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current

More information

STRATO LED Drivers 70W, Single output

STRATO LED Drivers 70W, Single output Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED

More information

S24SE/S24DE series 10W Single/Dual Output DC/DC Converter

S24SE/S24DE series 10W Single/Dual Output DC/DC Converter FEATURES Efficiency up to 87% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current

More information

O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications

O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection

More information

R-78xx-0.5 INNOLINE. Features. 0.5 AMP SIP3 Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter

R-78xx-0.5 INNOLINE. Features. 0.5 AMP SIP3 Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter Features Description Efficiency up to 97%,Non isolated, no need for heatsinks Pin-out compatible with LM78XX Linears Very low profile( L*W*H=11.5*7.5*10.2 ) Wide input range.(4.75v ~ 32V) Short circuit

More information

Power Supplies 3. SDN-P DIN Rail Series

Power Supplies 3. SDN-P DIN Rail Series SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.

More information

Single Output Switching Power Supply

Single Output Switching Power Supply .. RS- Code: CLP-A Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE

More information

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50 TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply

More information

7.5 Watt AC-DC Switch Power Supply

7.5 Watt AC-DC Switch Power Supply MAIN FEATURES: 7.5W Small Compact Size PCB Mount Single Output Regulated Output Range : 3.3VDC 24VDC Input Range : 85VAC 265VAC/47 63Hz Or 120VDC 370VDC Very Low Standby Power Consumption < 0.15W Better

More information

28 Volt Input - 40 Watt

28 Volt Input - 40 Watt Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function

More information

Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out

Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from

More information

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current

More information

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited

More information

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class

More information

Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG

Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range

More information

LDO03C/LDO06C/LDO10C

LDO03C/LDO06C/LDO10C NEW LDO03C/LDO06C/LDO10C A p p l i c a t i o n N o t e 1 8 6 1. Introduction 2 2. Models Features 2 3. General Description Electrical Description 2 Physical Construction 2 4. Features and Functions Wide

More information

UMEC International Corporation

UMEC International Corporation UP1301A SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature Protection

More information

UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming

UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned

More information

Product Family of Capacitor Chargers PS-17XX for 1500J/Sec in the range 500Vac to 1,000Vac PS-22XX for 2200J/Sec in the range 500Vac to 1,000Vac

Product Family of Capacitor Chargers PS-17XX for 1500J/Sec in the range 500Vac to 1,000Vac PS-22XX for 2200J/Sec in the range 500Vac to 1,000Vac Product Description Capacitor charger power supplies from Digital Power are designed to meet the exacting requirements of medical, aesthetic, and industrial pulsed energy systems. The modular design of

More information

DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS

DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a

More information

INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01

INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01 INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)

More information

APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt

APD336.221/.421 3 Outputs 19 DC/DC Converter, 50 Watt APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt High efficiency: 79% (@ 48V) DCin wide range: 9...36V or 18...72V DC 8 HP plug in width H15 standard pinout Active inrush current suppression Voltage

More information

Limited Ericsson Internal

Limited Ericsson Internal Limited TABLE PRODUCT OF CONTENTS SPECIFICATION 1 (1) (3) SEC/D Kevin Chen 152-EN/LZT146311 1/131-BMR632 Technical Uen Specification PKL 4 PI series 26-12-4 27-1-11 B D DC/DC converters, Input 36-, Output

More information

High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection

High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements

More information

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01 INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components

More information

Kit 27. 1W TDA7052 POWER AMPLIFIER

Kit 27. 1W TDA7052 POWER AMPLIFIER Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a

More information

LM1084 5A Low Dropout Positive Regulators

LM1084 5A Low Dropout Positive Regulators 5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as

More information

Cool-Power PI33xx-x0. 8 V to 36 V IN Cool-Power ZVS Buck Regulator Family. Product Description. Features & Benefits. Applications. Package Information

Cool-Power PI33xx-x0. 8 V to 36 V IN Cool-Power ZVS Buck Regulator Family. Product Description. Features & Benefits. Applications. Package Information Cool-Power PI33xx-x0 8 V to 36 V IN Cool-Power ZVS Buck Regulator Family Product Description The PI33xx-x0 is a family of high efficiency, wide input range DC-DC ZVS-Buck regulators integrating controller,

More information

AVD75-48S1V2. Product Descriptions. Applications. 30 Watts

AVD75-48S1V2. Product Descriptions. Applications. 30 Watts 30 Watts Sixteenthbrick Converter Page 1 Total Power: 30 Watts Input Voltage: 36 to 75 Vdc # of Outputs: Single Special Features Delivers up to 25A output Ultrahigh efficiency 87% typ. at half load and

More information

DATA SHEET. TDA1518BQ 24 W BTL or 2 x 12 watt stereo car radio power amplifier INTEGRATED CIRCUITS

DATA SHEET. TDA1518BQ 24 W BTL or 2 x 12 watt stereo car radio power amplifier INTEGRATED CIRCUITS INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The is an integrated class-b output amplifier in a 13-lead single-in-line (SIL) plastic power package.

More information

Silvertel. Ag9800M. 1. Features. 2. Description. Miniature PoE Module. Small SMT package. IEEE802.3af compliant. Low cost

Silvertel. Ag9800M. 1. Features. 2. Description. Miniature PoE Module. Small SMT package. IEEE802.3af compliant. Low cost Silvertel V1.2 December 2014 Datasheet Ag9800M Miniature PoE Module Pb 1. Features Small SMT package IEEE802.3af compliant Low cost Input voltage range 36V to 57V Minimal external components required Short-circuit

More information

Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out

Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from

More information

CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.

CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features. CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated

More information

Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out

Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from

More information

AAT4280 Slew Rate Controlled Load Switch

AAT4280 Slew Rate Controlled Load Switch General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

* Requires external power line filter and hold up capacitors; see typical applica on circuit and app notes for details

* Requires external power line filter and hold up capacitors; see typical applica on circuit and app notes for details The 8500 module contains all of the necessary circuitry for complete power line compliance with aeronau cs specifica on RTCA/DO 60G and Boeing's D6 36440(C)*. It is a pin for pin and form fit compa ble

More information

AC-DC Single Output Power Module

AC-DC Single Output Power Module AC-DC Single Output Power Module PFHC (AC-DC Conversion) and DC-DC Conversion Integrated in One Package. 2-in-1 Design Concept One module now contains the functions previously only obtainable by combining

More information

DC-DC Converters VI-200 VE-200

DC-DC Converters VI-200 VE-200 DC-DC Converters VI-200 VE-200 S C US C NRTL US 50 to 200 Watts Features Isolated output Up to 50 W/in 3 curus, ctüvus Up to 90% efficiency Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7mm) Remote sense

More information

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique

More information

55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs

55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs 55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs Features High Power Density, Low Profile Packaging Full Output Power at +100 C Baseplate Temperature Switching Power Supply Low Noise Designed

More information

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660 CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or

More information

RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,

RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu, APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP

More information

CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA

CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2

More information

LM1036 Dual DC Operated Tone/Volume/Balance Circuit

LM1036 Dual DC Operated Tone/Volume/Balance Circuit LM1036 Dual DC Operated Tone/Volume/Balance Circuit General Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.

More information

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz

More information

NOT RECOMMENDED FOR NEW DESIGNS

NOT RECOMMENDED FOR NEW DESIGNS 28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression

More information

400-800. Series OMEGA WATTS POWER SUPPLY AC/DC SINGLE OR MULTIPLE OUTPUT. Flexible modular design. Programmable outputs** Power factor correction***

400-800. Series OMEGA WATTS POWER SUPPLY AC/DC SINGLE OR MULTIPLE OUTPUT. Flexible modular design. Programmable outputs** Power factor correction*** INPUT Input protection Thermal protection Switching frequency internal fuse standard 100KHz Input with PFC : (MML400PFC, MML600, MML800) Input voltage range 85*-264VAC Inrush current (peak) MML400PFC

More information

SWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION

SWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION SWITCH-MODE POWER SUPPLY CONTROLLER. LOW START-UP CURRENT. DIRECT CONTROL OF SWITCHING TRAN- SISTOR. COLLECTOR CURRENT PROPORTIONAL TO BASE-CURRENT INPUT REERSE-GOING LINEAR OERLOAD CHARACTERISTIC CURE

More information

LM138 LM338 5-Amp Adjustable Regulators

LM138 LM338 5-Amp Adjustable Regulators LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range

More information

LM2941/LM2941C 1A Low Dropout Adjustable Regulator

LM2941/LM2941C 1A Low Dropout Adjustable Regulator LM2941/LM2941C 1A Low Dropout Adjustable Regulator General Description The LM2941 positive voltage regulator features the ability to source 1A of output current with a typical dropout voltage of 0.5V and

More information

Features. Applications. Truth Table. Close

Features. Applications. Truth Table. Close ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically

More information

1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET

1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock

More information

LM118/LM218/LM318 Operational Amplifiers

LM118/LM218/LM318 Operational Amplifiers LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families

More information

I STAR COMPUTER CO., LTD

I STAR COMPUTER CO., LTD I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON

More information

Configuration Chart. Single Output VI-LU - 50 200 W 1 VI-MU - 200 400 W 2 VI-NU - 300 600 W 3. Dual Output VI-PU - 100 400 W 2 VI-QU - 150 600 W 3

Configuration Chart. Single Output VI-LU - 50 200 W 1 VI-MU - 200 400 W 2 VI-NU - 300 600 W 3. Dual Output VI-PU - 100 400 W 2 VI-QU - 150 600 W 3 5 to 6 Watts Autoranging, AC-DC Switchers Features RoHS compliant (VE versions) Microcontroller architecture Inputs: 1/23 Vac autoranging Meets FCC Part, EN5522, Class B conducted emissions 8 9% efficiency

More information

NFF Series. CoolX600 NFF Series Cool. Patented Resonant Technology. NFF Series; No Fan Featured

NFF Series. CoolX600 NFF Series Cool. Patented Resonant Technology. NFF Series; No Fan Featured Cool TM 600 NFF Series Patented Resonant Technology NFF Series; No Fan Featured 100% natural convection cooled No internal or external fans needed No base-plate needed No Acoustic Noise or Vibrations &

More information

Precision, Unity-Gain Differential Amplifier AMP03

Precision, Unity-Gain Differential Amplifier AMP03 a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation

More information

www.jameco.com 1-800-831-4242

www.jameco.com 1-800-831-4242 Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LF411 Low Offset, Low Drift JFET Input Operational Amplifier General Description

More information

DATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08

DATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08 INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High

More information

High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203

High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203 a FEATURES kb Transmission Rate ADM: Small (. F) Charge Pump Capacitors ADM3: No External Capacitors Required Single V Power Supply Meets EIA-3-E and V. Specifications Two Drivers and Two Receivers On-Board

More information

MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information

MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package

More information

Rail-to-Rail, High Output Current Amplifier AD8397

Rail-to-Rail, High Output Current Amplifier AD8397 Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails

More information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor

More information

TL783C, TL783Y HIGH-VOLTAGE ADJUSTABLE REGULATOR

TL783C, TL783Y HIGH-VOLTAGE ADJUSTABLE REGULATOR HIGH-VOLTAGE USTABLE REGULATOR SLVS36C SEPTEMBER 1981 REVISED APRIL 1997 Output Adjustable From 1.25 V to 125 V When Used With an External Resistor Divider 7-mA Output Current Full Short-Circuit, Safe-Operating-Area,

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed

More information

HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS

HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS DESCRIPTION The, /6 single-channel and /6 dual-channel optocouplers consist of a 5 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This

More information

DDR SDRAM Memory Termination USING THE LX1672 AND LX1673 FOR DDR SDRAM MEMORY TERMINATION INTEGRATED PRODUCTS. Microsemi

DDR SDRAM Memory Termination USING THE LX1672 AND LX1673 FOR DDR SDRAM MEMORY TERMINATION INTEGRATED PRODUCTS. Microsemi AN-17 USING THE LX1672 AND LX1673 FOR DDR SDRAM MEMORY TERMINATION LX1672 Protected by US Patents: 6,285,571 & 6,292,378 INTEGRATED PRODUCTS Page 1 TABLE OF CONTENTS 1.0 INTRODUCTION... 3 2.0 SDR vs DDR

More information

Operating Manual UWAPS-TINY Series

Operating Manual UWAPS-TINY Series Operating Manual UWAPS-TINY Series Powecon Oy WWW.POWECON.FI 1/9 Table of content 1 Warranty...3 2 Safety information...3 3 Abbreviations and terminology...3 4 List of appendices...4 5 Introduction...4

More information

Telephone- and leased line modem for industrial applications TD-36

Telephone- and leased line modem for industrial applications TD-36 Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased

More information

VS-500 Voltage Controlled SAW Oscillator

VS-500 Voltage Controlled SAW Oscillator VS-500 Voltage Controlled SAW Oscillator Features Improved High Performance ASIC Industry Standard Package, 9 x 14 x 4.5 mm Frequencies from 155 MHz to 850 MHz 3.3 V or 5.0 V Operation At 155.52 MHz, Jitter

More information

SPI-8001TW. Switching Regulators. Dual 1.5 A, DC/DC Step-Down Converter. SANKEN ELECTRIC CO., LTD. http://www.sanken-ele.co.jp/en/

SPI-8001TW. Switching Regulators. Dual 1.5 A, DC/DC Step-Down Converter. SANKEN ELECTRIC CO., LTD. http://www.sanken-ele.co.jp/en/ Data Sheet 27469.301.1 Designed to meet high-current requirements at high efficiency in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment,

More information

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable

More information

40 V, 200 ma NPN switching transistor

40 V, 200 ma NPN switching transistor Rev. 01 21 July 2009 Product data sheet BOTTOM VIEW 1. Product profile 1.1 General description NPN single switching transistor in a SOT883 (SC-101) leadless ultra small Surface-Mounted Device (SMD) plastic

More information

Brushless DC Motor Controller Product Specification Assembly 025F0129

Brushless DC Motor Controller Product Specification Assembly 025F0129 Brushless DC Motor Controller Product Specification Assembly 025F0129 September 16, 2009 025F0129 ST B Brushless DC Motor Controller Data Sheet Page 1 Revision History ECN # Date Rev Description By 07058

More information