Dimensions Ø of cut length of Model-no. cut 2, ;

Size: px
Start display at page:

Download "Dimensions Ø of cut length of Model-no. cut 2, ;"

Transcription

1 with MASTER cut DE-STA-CO carbide burs are together with the pneumatic grinders in this catalogue the ideal combination for grinding, milling or deburring. The special cut and geometry of the edge produce high quality surface finishes in nearly all material, egg. Steel, cast material, weld seams, hardened steels etc. Master cut means a very good stock removal and a good handling. To choose the optimal combination of pneumatic grinder and bur please note the application information on pages 6 to 11. Please note also the speed diagram on this page to determine the right speed for the chosen bur with MASTER cut, series 010 Shaft Ø 3 mm, Overall length 38 mm, whole bur out of carbide Ø of cut length of Model-no. cut 2, Recommended working speeds for burs series 010, 015, , and routers series 190/191 Also available with end cut ; , , , ; ; , , Set of 16 carbide burs series 010 Special priced! 3 2,5; ,6 1, ) Modell-Nr. bei Stirnverzahnung, zusätzlich: Special length 51mm With end cut With end cut 2, OAL OAL OAL Model-no Subject to technical modifications without notice DE-STA-CO

2 with Master-cut series 015 Shank Ø 3mm, length of shaft 32mm, carbide bur head, shaft hardened steel shaft Ø of cut Model-no. cut 6, Set of 7 carbide burs series 015 Special priced! Grinders and Burs 6, , , ,5 16, ,5 5, Model-no ,5 6, Tool sets with included grinders Complete sets for a special price Set-Nr. 1 Set-Nr. 1T Consist in: Pencil grinder model-no. 12R (70 W, min -1, collet 3mm, air hose and overhose) : Consist in: Turbine grinder model-no. 12R SG (70W, min -1, collet 3 mm, airhose and overhose) Model-no. Set-Nr. 1 Model-no. Set-Nr. 1T Very useful: Carbide scriber Includes clip, guard and holder Model-no DE-STA-CO Subject to technical modifications without notice 21

3 with Master-cut series 041 to 044 shank Ø 6 or 8mm, cutter head carbide, shaft hardened steel hole bur out of carbide shaft Cylindrical shape Shaft Shaft Model-no Ø length Ø length Cylindrical shape with end cut Cylindrical shape with ball nose Round nose tree shape Pointed nose tree shape Subject to technical modifications without notice DE-STA-CO

4 with Master-cut series 045 to 052 shank Ø 6 or 8mm, cutter head carbide, shaft hardened steel hole bur out of carbide shaft Pointed cone shape Shaft Shaft Model-no Ø length Ø length 6 12; ; ; ; ; Grinders and Burs Egg shape Included angle shape 6 16; ; ; ; ; Belt sander set Special priced! Ball shape Flame shape Inverted taper shape ; ; Consists in: 1 Angular grinder model-no. 12S (220 W, min -1, collet 6 mm, 2 wrenches, air hose, overhose and grease gun with grease) 1 Belt sander attachment with 5 sanding belts 1 plastic case Model-no. Set-Nr. 5 DE-STA-CO Subject to technical modifications without notice 23

5 with standard and fine cut for deburring These cuts causes a smooth and fine finish of the surface. The burs are available with different shapes and also in fine cut. Standard cut shaft Shaft Shaft Model-no. Ø lenght Ø lenght , ,5 1, , ,5 2, , , , , Fine cut shaft Shaft Shaft Model-no. Ø lenght Ø lenght Subject to technical modifications without notice DE-STA-CO

6 with aluminum cut, series 101 to 108 Outstanding on aluminum, magnesium, brass, lead and most plastics. The special geometry of the cut leads to a fast stock removal and a ideal chip building. Grinders and Burs, series shank Ø 6 or 8mm, shaft hardened steel hole bur out of carbide Shaft Shaft Model-no. Ø lenght Ø lenght shaft with end cut ; ; ; ; ; DE-STA-CO Subject to technical modifications without notice 25

7 Carbide routers with diamond cut for working on fiberglass These routers are specially designed for working on fiberglass materials. The special geometry leads to a diamond cut which penetrate fiberglass very fast. This results a good handling and a fast stock removal. Only for use with DE-STA-CO grinders with router assemblies or milling machines. Carbide routers series 190/191 hole router out of carbide Shaft Shaft Model-no. Ø lenght Ø lenght ,3 19 6, ,9 25 7, ,5 25 9, with end cut ,9 25 7, with drill point (135 ) ,3 19 6, ,9 25 7, ,5 25 9, Subject to technical modifications without notice DE-STA-CO

8 Fiberglass armed cut off wheels, series 620 (authorization no. 1173) These fiberglass armed cut off wheels are ideal for working on metals and other materials. Their highest strength and resistance leads to a high stability of the wheels. *Thickness tolerances of the cut off wheels Thickness Tolerance 1,0 +0,3 spindle adapter Accessories Grinders and Burs 1,6 2,4 +0,2 +0,6 +0,4 +0,8 off wheels needed spindle adapters Model-no. Outer Ø Thickness* Inner Ø rec. speed recomm. grinder Model-no. Shaft Ø [RpM] (see page 6 and 7) , ,6 9, ,4 12S S ,0 12S , ,6 12S ,0 12S , ,6 12S ,0 9, S ,5 DE-STA-CO Subject to technical modifications without notice 27

9 Notes 28 Subject to technical modifications without notice DE-STA-CO

High speed machining and conventional die and mould machining

High speed machining and conventional die and mould machining High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions

More information

Chapter 6 Machining Center Carbide Insert Fundamentals

Chapter 6 Machining Center Carbide Insert Fundamentals This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars

More information

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX 413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:

More information

Advantages and application of PCD and CBn tools

Advantages and application of PCD and CBn tools PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.

More information

Lapping and Polishing Basics

Lapping and Polishing Basics Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)

More information

Vibration and Noise Information

Vibration and Noise Information Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST

More information

%Ï51,75,' 6=(56=È02. 'LDPRQG DQG &%1 WRROV

%Ï51,75,' 6=(56=È02. 'LDPRQG DQG &%1 WRROV 82 TÖBB MINT VÁLASZTÉK DIAMOND CUT-OFF WHEELS Diamond cut-off wheels are excellently suitable for application of various stones and building materials. It is very important to choose the correct segmented

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

Mounting accessories TÖBB MINT VÁLASZTÉK

Mounting accessories TÖBB MINT VÁLASZTÉK 96 FOR ADHESIVE DISCS The adhesive discs with various dimension and shapes are easy to use for mounting. Because of their flexible types they are suitable for sanding of flat or curving surfaces. GRINDING

More information

Think precision, Think HSS REAMING

Think precision, Think HSS REAMING Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel

More information

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,

More information

Coated Abrasives. Hand Sanding Sheets

Coated Abrasives. Hand Sanding Sheets Hand Sanding Sheets 21 Hand Sanding Sheets Paper Sheets PB013 FLINT LIGHT PAPER SHEETS PB013 (flint light paper) Abrasive: Flint Backing Material: Light paper Economy product For use on paint, soft wood,

More information

INTRODUCTION. Dear Business Partners,

INTRODUCTION. Dear Business Partners, INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,

More information

Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw

Home > ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

New in the PFERD Product Line 204

New in the PFERD Product Line 204 COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.

More information

Section V Removing Frozen or Broken Fasteners & Taps

Section V Removing Frozen or Broken Fasteners & Taps 154 CHAPTER 6 THREADS & THREADING Section V Removing Frozen or Broken Fasteners & Taps Frozen or Broken Fastener Removal What are the common methods for removing frozen or broken threaded fasteners? Here

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common

More information

Permanent Magnetic Generator Construction Manual

Permanent Magnetic Generator Construction Manual Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent

More information

Milling & Machining Centers

Milling & Machining Centers Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

RAMAX S Prehardened stainless holder steel

RAMAX S Prehardened stainless holder steel T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide

More information

GEOMETRY OF SINGLE POINT TURNING TOOLS

GEOMETRY OF SINGLE POINT TURNING TOOLS GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry

More information

Pads for use on Dual Action / Random Orbital Sanders

Pads for use on Dual Action / Random Orbital Sanders 70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty

More information

MACHINING OPERATIONS AND MACHINE TOOLS

MACHINING OPERATIONS AND MACHINE TOOLS MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and

More information

Right Angle Grinder USA MADE FLAP DISCS

Right Angle Grinder USA MADE FLAP DISCS USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

Milling Chuck Features

Milling Chuck Features Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings

More information

Stainless Steel. Systems for. Finishing. The Efficient and Economical Way to Produce Exceptional Finishes. Now Includes

Stainless Steel. Systems for. Finishing. The Efficient and Economical Way to Produce Exceptional Finishes. Now Includes 3M Abrasives and Power Tools for Stainless Steel Finishing Now Includes 3M Fibre Disc 987C for Exceptional Life! Systems for Stainless Steel Finishing The Efficient and Economical Way to Produce Exceptional

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

How To Design A 3D Print In Metal

How To Design A 3D Print In Metal DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

Three Key Elements of a Cutting Tool

Three Key Elements of a Cutting Tool End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

CNC Applications Speed and Feed Calculations

CNC Applications Speed and Feed Calculations CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning

More information

Roloc TM. Discs. Easy to mount easy to change

Roloc TM. Discs. Easy to mount easy to change Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions.

More information

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles 8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Material Removal Tools

Material Removal Tools Material Removal Tools Model Number Index Model Page Model Page Model Page Model Page Model Page 10B1200-32... 31 10B2500-01...11 10K2752-84... 19 10L1000-36...11 10L1001-36...11 10L1003-36...11 10L1080-36...11

More information

LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves

LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly

More information

NOT SEARCHING, BUT FINDING

NOT SEARCHING, BUT FINDING NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide

More information

indexable Center Drill

indexable Center Drill Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

Platzhalter für Titel

Platzhalter für Titel Tool Drives Tool Drives Platzhalter für Titel I 1 Tool Drives Table of Contents Contents Page The fast way to the best drive 3 Comparison of the drive systems 4 The PFERD program includes air-powered,

More information

ROBOT END EFFECTORS SCRIPT

ROBOT END EFFECTORS SCRIPT Slide 1 Slide 2 Slide 3 Slide 4 An end effector is the business end of a robot or where the work occurs. It is the device that is designed to allow the robot to interact with its environment. Similar in

More information

1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866

1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard

More information

TIE ROD END DESIGN TUTORIAL

TIE ROD END DESIGN TUTORIAL TIE ROD END DESIGN TUTORIAL THE FOLLOWING IS A SIMPLIFIED STEP-BY-STEP GUIDE INTENDED TO ILLUSTRATE THE DECISIONS AND COMPROMISES INVOLVED IN DESIGNING A TIE ROD END. THE PROCESS FOR DESIGNING ANY BALL

More information

THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL

THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden

More information

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING APPRENTICE CORE COMPETENCIES 1. Identify and Demonstrate Usage of Machine Safety and Personal Protective Equipment

More information

U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.

U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0. General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

Bonded Abrasives. Precise cutting and grinding discs for many materials

Bonded Abrasives. Precise cutting and grinding discs for many materials Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional

More information

Making Soft Jaws for a Bison 3 Jaw Lathe Chuck

Making Soft Jaws for a Bison 3 Jaw Lathe Chuck Making Soft Jaws for a Bison 3 Jaw Lathe Chuck By R. G. Sparber Copyleft protects this document. 1 My Bison lathe chuck has served me well for many years. One of its features is the ability to remove the

More information

FACTORY INSTALLED OPTIONS:

FACTORY INSTALLED OPTIONS: Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,

More information

TopSky DLG Installation Manual

TopSky DLG Installation Manual TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper

More information

MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified

MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following

More information

Cerobear Spindle Bearings for Machine Tool Applications

Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in

More information

TechCut 4 Precision Low Speed Saw

TechCut 4 Precision Low Speed Saw Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction

More information

Resharpening Companion

Resharpening Companion Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace

More information

Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills

Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills 1 of 6 9/9/2014 3:59 PM I. Catalog Information Credit- Degree applicable Effective Quarter: Fall 2014 MCNC 75B Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced

More information

all digital all options The right milling option High precision and productivity

all digital all options The right milling option High precision and productivity all digital all options The innovative FULL CONTOUR milling system ZIRCONIA The right milling option High precision and productivity Customized digital solutions for every laboratory Preparation Scanners

More information

Milling Milling milling cutter milling machines 1

Milling Milling milling cutter milling machines 1 Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the

More information

Making Clock Wheel & Pinion Cutters

Making Clock Wheel & Pinion Cutters Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial

More information

How To Use 3M Cubitron Ii Abrasives

How To Use 3M Cubitron Ii Abrasives 3M Abrasives for Right-Angle Systems The Right Choice Cut, grind, finish and more with a world-class abrasive system that helps you work smarter, finish faster! 3 Your Power For metal fabrication and finishing

More information

Pepper Mill Instructions by Fred Kachelhofer

Pepper Mill Instructions by Fred Kachelhofer by Fred Kachelhofer I have seen Nick Cook turn a pepper mill twice and read his article posted at http://www.nickcookwoodturner.com/articles.htm (follow link and then click on Pepper Mill ). I have had

More information

L I V E T O O L F O R O K U M A

L I V E T O O L F O R O K U M A L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,

More information

Table of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1

Table of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1 Table of contents BRAZED TURNING TOOLS Toolholders 2 Tips 6 Rods 8 9 1 ISO External holders General turning External Ordering Tip According to ISO243-1975 (DIN 4982-198) h b l 1 f 1 f 2 a p r ε γ 1) λ

More information

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum

More information

Determining the Right Molding Process for Part Design

Determining the Right Molding Process for Part Design Determining the Right Molding Process for Part Design How RIM Molding Advantages Compare with Traditional Production Technologies Page 2 Introduction This White Paper details the part production processes

More information

Wood Drilling.

Wood Drilling. Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and

More information

LEADER IN CUTTING TECHNOLOGY

LEADER IN CUTTING TECHNOLOGY LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of

More information

MaraMeter. Indicating Snap Gages

MaraMeter. Indicating Snap Gages - 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F

More information

AISI O1 Cold work tool steel

AISI O1 Cold work tool steel T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

COATED CARBIDE. TiN. Al 2 O 3

COATED CARBIDE. TiN. Al 2 O 3 COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =

More information

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

FLEX-HONE TOOL GENERAL APPLICATION AND SELECTION OF THE

FLEX-HONE TOOL GENERAL APPLICATION AND SELECTION OF THE GENERAL APPLICATION AND SELECTION OF THE FLEX-HONE TOOL The Flex-Hone Tool is a resilient, flexible honing tool used to improve the internal surface finish while also being able to deburr a bore or cylinder.

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

RAPID DIAL TEST INDICATORS

RAPID DIAL TEST INDICATORS RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot

More information

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate

More information

HIGH SPEED SPINDLE MOTORS

HIGH SPEED SPINDLE MOTORS DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability

More information

Abrasive-Flow Machining

Abrasive-Flow Machining 1 Polishing Using Magnetic Fields Figure 25.30 Schematic illustration of polishing of balls and rollers using magnetic fields. (a) Magnetic float polishing of ceramic balls. (b) Magnetic-field-assisted

More information

Makes bends greater than 90 in a single operation

Makes bends greater than 90 in a single operation TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles

More information

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale

More information

Introduction to JIGS AND FIXTURES

Introduction to JIGS AND FIXTURES Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production

More information

PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING

PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate

More information

Polishing and finishing barrels BTV

Polishing and finishing barrels BTV Polishing and finishing barrels BTV Polishing barrels for buttons, products in polyester, urea, galalith and related item. Strengthened model with rubber lining for finishing of metallic minuteness. Steel

More information

Mandrel system MIS. www.microcentric.de

Mandrel system MIS. www.microcentric.de Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:

More information

Pneumatic Air Tools. www.atatools.ie

Pneumatic Air Tools. www.atatools.ie Pneumatic Air Tools www.atatools.ie ATA PNEUMATIC POWER TOOLS Contents High Speed Straight Pencil Grinders 1 Engraver Pen 2 High Speed Straight Grinders 3-5 Anti-Vibration Die Grinder 6 High Power Straight

More information

Die casting Figure M2.3.1

Die casting Figure M2.3.1 Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used

More information

Driven Toolholders for SAUTER Turrets

Driven Toolholders for SAUTER Turrets Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets

More information

comprehensive training factory technical support on-site trouble shooting custom tool design

comprehensive training factory technical support on-site trouble shooting custom tool design comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will

More information

Cutting Tool Materials

Cutting Tool Materials Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various

More information

SAMPLE TEST QUESTIONS MOTOR VEHICLE BODY REPAIRER- ITA WEBSITE

SAMPLE TEST QUESTIONS MOTOR VEHICLE BODY REPAIRER- ITA WEBSITE 1 How are spot welds located on the underside of an apron? A. Heat the undercoat with a torch. B. Visually inspects with a trouble light. C. Grind the surface with an angle grinder. D. Clean factory seams

More information

Dynafile. Air-Powered Abrasive Belt Machine. Featuring New Composite Quick-Change Housing Cover!

Dynafile. Air-Powered Abrasive Belt Machine. Featuring New Composite Quick-Change Housing Cover! Dynafile Reorder No. D02.02 The Most Recognized Shape In Portable Abrasive Belt Tools! Air-Powered Abrasive Belt Machine Grind Deburr Blend Clean Finish Polish Featuring New Composite Quick-Change Housing

More information

Cutting Processes. Simulation Techniques in Manufacturing Technology Lecture 7

Cutting Processes. Simulation Techniques in Manufacturing Technology Lecture 7 Cutting Processes Simulation Techniques in Manufacturing Technology Lecture 7 Laboratory for Machine Tools and Production Engineering Chair of Manufacturing Technology Prof. Dr.-Ing. Dr.-Ing. E.h. Dr.

More information

TRIMMING UNIT/DIAMOND MACHINE TST.13

TRIMMING UNIT/DIAMOND MACHINE TST.13 TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.

More information

Go-kart for little race-drivers

Go-kart for little race-drivers Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it

More information