Model MFMII MFMII. Fire Line Meter Sizes 4", 6", 8", 10", 12" NOTICE OF DISCONTINUATION, Effective October 2011
|
|
|
- Victoria Brooks
- 7 years ago
- Views:
Transcription
1 Fire Line Meter NOTICE OF DISCONTINUATION, Effective October 2011 Mueller Systems has discontinued new sales of our MFMII meter line in an effort to introduce new metrology requested by our customer base. If you need an alternative meter to our MFMII fire meter line, please take a look at the Hersey FM3 fire meters and our HbMAG electromagnetic meters. Anticipated availability of the FM approved HbMAG is May, MFMII Replacement component parts for the MFMII meters will continue to be available for the foreseeable future. As we deplete our existing stock of components, we will no longer offer these options for sale. Check the exploded diagram and table in this data sheet for highlighted replacement components to keep your MFMII performing to new meter accuracy standards. Thank you for using Hersey meters. We appreciate your continued business.
2 Fire Line Meter Features APPLICATIONS: The Hersey was designed for use as a combined fire and domestic service meter where one water line serves both fire and domestic, or process needs. Also as a master meter for an entire water system; for water system zones; automatic sprinkler systems and fire services; for domestic or process water systems where low pressure loss and dependable accuracy over a very wide flow range are essential. Hersey Water Meters will measure accurately at full pipe capacity and have the highest flow capability available. CONSTRUCTION: Hersey MFM II Water Meters consist of a mainline meter to measure high flow rates, a bypass meter to measure the lower flow rates, and a weight and lever valve (mainline valve) to automatically control the point at which the larger mainline meter registers. The valve is self-aligning and self-adjusting. The bypass includes a resilient seated isolation valve, a swing check valve, and depending upon the bypass meter, either a, Hersey Model MVR Meter or Hersey Horizon Meter. The mainline meter maincase is cast iron with epoxy coating inside and out. The MFM II is designed with an unobstructed full flow that eliminates the need for an external strainer. An internal strainer protects each measuring element. REGISTERS: Separate mainline and bypass registers are provided. Permanently sealed registers use proven magnetic drive design and the exclusive Hersey triple seal to provide clarity and error free meter reading. Internal gears in all assemblies are self-lubricating, molded plastic for long life and minimum friction. The standard registers include a straight reading, odometer-type, totalization display, a 360 degree test circle with center sweep hand, and a low flow indicator. The Calibrator Gear Train permits accuracy calibration on MFM II mainlines and bypasses. For accuracy calibration on MVR and Horizon bypasses, consult the appropriate meter sections. All Hersey models are available with electronic meter reading systems for increased meter reading efficiency. (See Automatic Meter Reading Equipment) OPERATION: In normal operation, during low flow rates all water flows through the bypass section and is registered by a model MVR vertical turbine meter or a Hersey Horizon Meter (see separate data pages for description of these meters). When pressure loss through the bypass section approaches 4 PSI, the mainline lever valve automatically opens permitting the torrent proportional mainline meter to measure flow. When flow rate decreases sufficiently, the mainline lever valve closes, and all lower flows are again measured by the bypass meter. The exclusive automatic lever valve is controlled by a specially designed weight which locks the valve in the closed position until a predetermined pressure loss overcomes the weight and opens the valve. A venturi effect causes a precise portion of the total volume to pass through the torrent proportional mainline meter. The self-aligning rubber-faced valve clapper assures a positive seal for accurate bypass meter registration. MAINTENANCE: The Hersey MFM II and bypass meters are designed and manufactured to provide long service life with low maintenance. All parts are accessible for in-line service if needed. CONNECTIONS: ANSI class 125 flanges standard. MFM II Materials and Specifications MODEL DESIGNATION MFM II SIZES 4", 6", 8", 10", 12" STANDARDS Manufactured and tested to meet or exceed all applicable parts of AWWA C703, FM approved mainline; UL listed, ULC classified. INSTALLATION OPERATING FLOW RANGE ACCURACY MAXIMUM WORKING PRESSURE TEMPERATURE RANGE MEASURING ELEMENT REGISTER TYPE METER CONNECTIONS Horizontal only with 8x pipe diameter of straight pipe (same size as meter) on inlet side of meter. See Charts on the following pages See Charts on the following pages 175 PSI 33º F to 100º F water temperature Mainline Torrent Wheel MVR Rotor Horizon Rotor Permanently sealed, straight reading, magnetic drive with low flow indicator. Remote reading units optional. ANSI class 125 standard end flanges. MATERIALS Maincase epoxy-coated cast iron; meter case bronze UNSC84400; Valve weight, Swing arm and Seats bronze UNSC84400; Valve discs elastomer; Casing bolts steel. OPTIONS AMR/AMI Reading Systems. MFM II
3 Fire Line Meter Meter Registration Meter Size Initial Dial* Capacity Initial Dial* Capacity 4" 1000 Gal. 100 Million 100 Cubic Ft. 10 Million 6" 1000 Gal. 1 Billion 100 Cubic Ft. 100 Million 8" 1000 Gal. 1 Billion 100 Cubic Ft. 100 Million 10" 1000 Gal. 1 Billion 100 Cubic Ft. 100 Million 12" 1000 Gal. 1 Billion 100 Cubic Ft. 100 Million *Registration equal to one full revolution of the sweep hand. Note: Mainline Meter Size is reflected in the chart above for MVR or Horizon bypass meters. See appropriate sections. Mueller Systems offers remote and AMR registers as options for new meters and retrofit applications. See Meter Reading Systems section for more details. These options offer the utmost in remote reading flexibility, allowing for diverse combinations of remote read systems, as well as the ability to upgrade or migrate from one system to another. Flow Characteristics MFM II /Vertical Turbine Meter Size Typical Low Flow (95% Minimum) Typical Operating Range (100% ± 3.0%) Maximum Intermittent Flow 4"x2" 1/4 GPM gpm 1250 GPM or full pipe capacity 6"x2" 2 GPM GPM 2600 GPM or full pipe capacity 6"x3" 2-1/2 GPM gpm 2600 GPM or full pipe capacity 8"x4" 3-1/2 GPM gpm 5000 GPM or full pipe capacity 10"x6" 5 GPM gpm 7750 GPM or full pipe capacity 12"x6" 5 GPM gpm 8000 GPM or full pipe capacity MFM II /Horizontal Turbine Meter Size Typical Low Flow (95% Minimum) Typical Operating Range (100% ± 3.0%) Maximum Intermittent Flow 4"x2" 2-1/2 GPM gpm 1250 GPM or full pipe capacity 6"x3" 3 GPM gpm 2600 GPM or full pipe capacity 8"x4" 4 GPM GPM 5000 GPM or full pipe capacity 10"x6" 9 GPM gpm 7750 GPM or full pipe capacity 12"x6" 9 GPM gpm 8000 GPM or full pipe capacity *Performance curves are typical only and not a guarantee of performance. **Minimum to Maximum
4 Fire Line Meter Performance Head loss 4" MFM II with 2" MVR PRESSURE LOSS (P.S.I.) Performance Accuracy 4" MFM II with 2" MVR PERCENT REGISTERED Head loss 6" MFM II with 2" MVR Accuracy 6" MFM II with 2" MVR PRESSURE LOSS (P.S.I.) PERCENT REGISTERED
5 Fire Line Meter Performance Head loss 6" MFM II with 3" MVR PRESSURE LOSS (P.S.I.) Performance Accuracy 6" MFM II with 3" MVR PERCENT REGISTERED Head loss 8" MFM II with 4" MVR Accuracy 8" MFM II with 4" MVR PRESSURE LOSS (P.S.I.) PERCENT REGISTERED
6 Fire Line Meter Performance Head loss 10" MFM II with 6" MVR PRESSURE LOSS (P.S.I.) Performance Accuracy 10" MFM II with 6" MVR PERCENT REGISTERED Head loss 12" MFM II with 6" MVR Accuracy 12" MFM II with 6" MVR PRESSURE LOSS (P.S.I.) PERCENT REGISTERED *Performance curves are typical only and not a guarantee of performance.
7 Fire Line Meter Dimensions and Weights Model MFM II with Vertical Turbine A D E G F B J H Compressed Size 4" x 2" 6" x 2" 6" x 3" 8" x 4" 10" x 6" 12" x 6" A 33" 45" 45" 53" 68" 68" B-Vertical Turbine 28" 34-1/2" 35" 41-3/4" 53-1/4" 53-1/4" D-Vertical Turbine Spool 7" N/A 12" 15" 18-1/2" 18-1/2" E-Vertical Turbine 10" 10" 12" 14" 18" 18" F-Vertical Turbine 20-3/4" /2" 32-7/8" 39-3/4" 39-3/4" G 7-1/4" 8-1/2" 8-1/2" 10-3/8" 13-1/2" 13-1/2" H 17-1/2" 23-1/2" 23-1/2" 30-1/2" 36-1/2" 40" J Open 19" N/A /2" 41" 43" Net wt. with Vertical Turbine
8 Fire Line Meter Parts
9 Fire Line Meter Parts Ref. No. Description 4" Model 6" Model 8" Model 10" Model 12" Model 1 Bottom Case Assembly Epoxy Dome Epoxy Mainline Top Case Train Cap Train Cap Gasket Train Cap Screw (6) (6) 4 Mainline Bolt (10) (14) (18) (16) (16) (2) 4 Mainline Nut (10) (14) (18) (16) (16) 5 Dome Bolt Dome Nut (12) (12) (16) (16) (22) (22) (28) (28) (28) (28) 6 Mainline Top Case Gasket Dome Ring Gasket Weight & Swing Arm Hinge Pin (2) (2) (2) (2) (2) 10 Hinge Pin Bushing (4) (4) (4) (4) (4) 11 Pipe Plug, taped (4) (4) (4) (4) (4) 12 Lower Magnetic Drive Assembly Magnetic Lower Drive Retaining Ring Vent Screw (2) (2) (2) (2) (2) 15 Nylon Vent Screw Washer (4) (4) (4) (4) (4) 16 Blank Flange Epoxy (2) (2) (2) (2) (2) 17 Flange Ring Gasket (6) (8) (8) (8) (8) 18 Torrent Adapter Ring Torrent Adapter Weight and Swing Arm Bushing (4) (4) (4) (4) (4) 21 Swing Arm Weight, full (MVR as bypass) Swing Arm Roller Assembly Swing Arm Roll Pin Swing Arm Roll Pin Washer (2) (2) (2) (2) (2) 26 Swing Arm Roll Pin Clip (2) (2) (2) (2) 27 Clapper Clapper Rubber Clapper Disc Clapper Bolt Clapper Bolt Stop Nut Cotter Pin* O-Ring Inlet Elbow Epoxy Outlet Elbow Epoxy Flange Bolt (8) (28) (59)** (68) (68) (16) 35 Flange Nut (24) (28) (65) (68) (68) 36 Support Support Bolt (not showm) Support Nut (not shown) (2) (4) (4) (2) (4) (4) (2) (4) (4) (2) (4) (4) (2) (4) (4) 37 OS&Y Gate Valve Flange Gasket (2) (8) (8) (8) (8) 39 Seat Ring Check Valve Assembly Epoxy*** 54590E 56590E 57590E Torrent Interior with Strainer*** Meter MVR Refer to MVR or Horizon Parts List *Older style, for meter manufactured prior to **When replacing bypass flange bolts. ***See the following pages for component parts.
10 Torrent Interior with Strainer Ref. No. Description 4" Model 6" Model 8" Model 10" & 12" Model Torrent Interior with Strainer Torrent Spindle Assembly Torrent Deflector Torrent Receptor Deflector/Receptor Assembly Screw (3) (3) (3) (3) 4 Torrent Wheel and Bushing Assembly Torrent Wheel Wheel Bushing Bushing Screw A5729 (4) A5729 (4) A5729 (4) A5730 (4) 5 Torrent Spindle Torrent Spindle Head Torrent Bearing Ball Torrent Spindle Cap Set Screw Torrent Interior Adjusting Screw Torrent Thrust Washer Torrent Check Nut Cap Screw (4) (4) (4) (4) 14 Torrent Strainer Strainer Attachment Screws (2) (2) (2) (2) 16 Deflector/Receptor Assembly Nut (3) (3) (3) (3) Note: If more than one part is required per assembly, quantity is noted after part number (in parenthesis)
11 Check Valve Assembly Ref. No. Description 4" Model 2" CV 6" Model 3" CV *Note: If more than one part is required per assembly, quantity is noted after part number (in parenthesis). 8" Model 4" CV 10" Model 6" CV 12" Model 6" CV Check Valve Assembly Epoxy Coated 54590E 56590E 57590E Cover Epoxy Coated Bottom Case Epoxy Coated Hinge Pin Bushing (2) (2) (2) (2) (2) 4 Hollow Plug Bronze Plug A 5907A 5907A 5 Case Gasket Hex HD Bolt (4) (6) (8) (12) (12) 7 Nut (4) (6) (8) (12) (12) 8 Swing Arm Clapper Clapper Rubber Clapper Disc Clapper Bolt Lock Nut Hinge Pin Square HD Pipe Plug (2) (2) (2) (2) (2)
12 Visual Register Options for MFMII
13 Visual Register Options for MFMII Ref Description 4" MFMII Mainline 2" MVR 2" Horizon 1 Visual Register Gallons Cubic Feet D D See MVR Section pg. 4.1 See Horizon Section pg Register Housing Base (Bronze) C5772 See MVR See Horizon 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12558 See MVR See Horizon 5 Lid (Bronze) C5774 See MVR See Horizon 5 Lid (Plastic) C5768 See MVR See Horizon 6 Roll Pin AS41122 AS41122 AS Calibrator Mounting Screws (4) A13014 A13014 A Calibrator Housing C6523 C6523 C Calibrator O-ring Calibrator Holding Ring Calibrator Gear Train C6534XX*** C6534XX*** C6534XX*** 12 Calibrator Housing Kit (includes 7-10) B7860 B7860 B7860 Ref Description 6" MFMII 3" MVR 3" Horizon 1 Visual Register Gallons Cubic Feet D35327 D35337 See MVR Section pg. 4.1 See Horizon Section pg Register Housing Base (Bronze) C5772 See MVR See Horizon 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12558 See MVR See Horizon 5 Lid (Bronze) C5774 See MVR See Horizon 5 Lid (Plastic) C5768 See MVR See Horizon 6 Roll Pin AS41122 See MVR See Horizon 7 Calibrator Mounting Screws (4) A13014 See MVR See Horizon 8 Calibrator Housing C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX*** See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 See MVR See Horizon ***Call Mueller Systems Customer Service for the appropriate Calibrator Gear Train.
14 Visual Register Options for MFMII Ref Description 8" MFMII Mainline 4" MVR 4" Horizon 1 Visual Register Gallons D35324 See MVR See Horizon Cubic Feet D35334 See MVR See Horizon 2 Register Housing Base (Bronze) C5772 See MVR See Horizon 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12558 See MVR See Horizon 5 Lid (Bronze) C5774 See MVR See Horizon 5 Lid (Plastic) C5768 See MVR See Horizon 6 Roll Pin AS41122 See MVR See Horizon 7 Calibrator Mounting Screws (4) A13014 See MVR See Horizon 8 Calibrator Housing C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX*** See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 See MVR See Horizon Ref Description 10" MFMII Mainline ***Call Mueller Systems Customer Service for the appropriate Calibrator Gear Train. 12" MFMII Mainline 6" MVR 6" Horizon 1 Visual Register Gallons Cubic Feet D35321 D35331 D35321 D35331 See MVR See MVR See Horizon See Horizon 2 Register Housing Base (Bronze) C5772 C5772 See MVR See Horizon 2 Register Housing Base (Plastic) C5769 C5769 See MVR See Horizon 3 Register Housing Insert C5770 C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12558 A12558 See MVR See Horizon 5 Lid (Bronze) C5774 C5774 See MVR See Horizon 5 Lid (Plastic) C5768 C5768 See MVR See Horizon 6 Roll Pin AS41122 AS41122 See MVR See Horizon 7 Calibrator Mounting Screws (4) A13014 A13014 See MVR See Horizon 8 Calibrator Housing C6523 C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX*** C6534XX*** See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 B7860 See MVR See Horizon
15 Translator Encoder Register and Calibrator Calibrator Train % C % C % C % C % C % C % C % C % C % C % C % Nominal C % C % C % C % C % C % C % C % C % C %
16 Translator Register Options for MFMII Ref Description 4" MFMII Mainline 2" MVR 2" Horizon 1 Translator Register Gallons* Cubic Feet* D353417xxx D353517xxx See MVR Section See Horizon Section 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12658 See MVR See Horizon 5 Lens Terminal Cover B8447 See MVR See Horizon 6 Terminal Lug Screw (3) See MVR See Horizon 7 Calibrator Mounting Screws A13014 See MVR See Horizon 8 Calibrator Housing C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX* See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 See MVR See Horizon 13 TrueRead (not shown) C6551G See MVR See Horizon 14 1,000' Spool of Wire AS755 See MVR See Horizon 15 Wall Pad T1234 See MVR See Horizon 16 Pit Pad with 3' of wire T1235 See MVR See Horizon Ref Description 6"MFMII Mainline 3" MVR 3" Horizon 1 Translator Register Gallons* Cubic Feet* D353407xxx D353507xxx See MVR Section See Horizon Section 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12658 See MVR See Horizon 5 Lens Terminal Cover B8447 See MVR See Horizon 6 Terminal Lug Screw (3) See MVR See Horizon 7 Calibrator Mounting Screws A13014 See MVR See Horizon 8 Calibrator Housing C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX* See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 See MVR See Horizon 13 TrueRead (not shown) C6551G See MVR See Horizon 14 1,000' Spool of Wire AS755 See MVR See Horizon 15 Wall Pad T1234 See MVR See Horizon 16 Pit Pad with 3' of wire T1235 See MVR See Horizon *Call Mueller Systems Customer Service for the appropriate Translator Register, AMR device and Calibrator Gear Train part numbers.
17 Translator Register Options for MFMII Ref Description 8" MFMII Mainline 4" MVR 4" Horizon 1 Translator Register Gallons* Cubic Feet* D353404xxx D353504xxx See MVR Section See Horizon Section 2 Register Housing Base (Plastic) C5769 See MVR See Horizon 3 Register Housing Insert C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12658 See MVR See Horizon 5 Lens Terminal Cover B8447 See MVR See Horizon 6 Terminal Lug Screw S98197 (3) See MVR See Horizon 8 Calibrator Housing C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX* See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 See MVR See Horizon 13 TrueRead (not shown) C6551G See MVR See Horizon 14 1,000' Spool of Wire AS755 See MVR See Horizon 15 Wall Pad T1234 See MVR See Horizon 16 Pit Pad with 3' of wire T1235 See MVR See Horizon Ref Description 10" MFMII Mainline 1 Translator Register 25' wire only Gallons D353401xxx Cubic Feet D353501xxx 12" MFMII Mainline 6" MVR 6" Horizon D353401xxx D353501xxx See MVR Section See Horizon Section 2 Register Housing Base (Plastic) C5769 C5769 See MVR See Horizon 3 Register Housing Insert C5770 C5770 See MVR See Horizon 4 Register Locking Pin (Bronze Plastic) A A See MVR See Horizon 4 Register Locking Pin (Blue Color Plastic) A12658 A12658 See MVR See Horizon 5 Lens Terminal Cover B8447 B8447 See MVR See Horizon 6 Terminal Lug Screw (3) (3) See MVR See Horizon 7 Calibrator Mounting Screws A13014 A13014 See MVR See Horizon 8 Calibrator Housing C6523 C6523 See MVR See Horizon 9 Calibrator O-ring See MVR See Horizon 10 Calibrator Holding Ring See MVR See Horizon 11 Calibrator Gear Train C6534XX* C6534XX* See MVR See Horizon 12 Calibrator Housing Kit (includes 7-10) B7860 B7860 See MVR See Horizon 13 TrueRead (not shown) C6551G C6551G See MVR See Horizon 14 1,000' Spool of Wire AS755 AS755 See MVR See Horizon 15 Wall Pad T1234 T1234 See MVR See Horizon 16 Pit Pad with 3' of wire T1235 T1235 See MVR See Horizon *Call Mueller Systems Customer Service for the appropriate Translator Register, AMR device and Calibrator Gear Train part number.
18 Mainline Standard Conversion Kits Parts supplied in a Hersey Fireline Conversion Kit: 1. New complete top case with gasket, nuts and bolts. 2. New sealed registers. 3. New register bayont style housing with locking pin. 4. New calibrator gear train and housing. 10" & 12" sizes 4", 6", 8" sizes Description 4" 6" 8" 10" & 12" U.S. Gallon PCS0201 PCT0201 PCU0201 PCV0201 Cubic Foot PCS0101 PCT0101 PCU0101 PCV0101 *Part numbers listed are for standard read registers. Contact customer service for optional AMR registers. Mainline Weights Necessary for Converting to Different Meters Original Meter Conversion to Part Number CT/MCt/MCtII mvr No Need to Change Weight CT/MCT/MCTII 2" HORIZON 2" CT/MCT/MCTII 3" HORIZON 3" CT/MCT/MCTII 4" HORIZON 4" CT/MCT/MCTII 6" HORIZON 6" MHR or Horizon 2" MVR 2" MHR or Horizon 3" MVR 3" MHR or Horizon 4" MVR 4" MHR or Horizon 6" MVR 6" MVR 2" HORIZON 2" MVR 3" HORIZON 3" MVR 4" HORIZON 4" MVR 6" HORIZON 6" Note: Using anything other than a genuine Hersey bypass meter may affect performance, may void approvals and test data.
19 Flanged Adapters Ref. Description Part Number 1 2" Adapter * for Replacement of Compound or Disc Meter on 4" FM/MFM/MFMII (Epoxy Coated) 1 3" Adapter for Replacement of Compound or Disc Meter (with MVR) on 6" FM/MFM/MFMII (Epoxy Coated) 1 4" Adapter for Replacement of Compound or Disc Meter (with MVR) on 8" FM/MFM/MFMII (Epoxy Coated) 1 6" Adapter for Replacement of Compound or Disc Meter (with MVR) on 10", 12" FM/MFM/MFMII (Epoxy Coated) 2 Bolt for 2" Meter Connection (4) (2) 2 Bolt for 3" Meter Connection (4) (8) 2 Bolt for 4" Meter Connection (4) (20) 2 Bolt for 6" Meter Connection (4) (20) 3 Nut for 2" Meter Connection (6) 3 Nut for 3" Meter Connection (12) 3 Nut for 4" Meter Connection (24) 3 Nut for 6" Meter Connection (24) 4 Gasket for 2" Meter Connection (3) 4 Gasket for 3" Meter Connection (3) 4 Gasket for 4" Meter Connection (3) 4 Gasket for 6" Meter Connection (3) *Not needed if replacement is 2" MVR-160 flanged meter. Note: If more than one part is required per assembly, quantity is noted after part number (in parenthesis). Mueller Systems 10/2010
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
MODEL 9000. Service Manual. IMPORTANT: Fill in pertinent information on page 2 for future reference.
MODEL 9000 Service Manual IMPORTANT: Fill in pertinent information on page for future reference. Job Specification Sheet * JOB NO. * MODEL NO. * WATER TEST * CAPACITY PER UNIT MAX. PER REGENERATION * MINERAL
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
G. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize hinge and stop pins, preventing vibration and wear.
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
MUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
ETL listed for installations within 5 ft. (1.5M) of outer edge of water www.srsmith.com 79-15152-00 Rev E2 9.14 Page 1 of 10
Color Light Streams Large Laminar Installation Manual (CLSLL) Input Power: Total Power: 12V AC 5W 4008814 ETL listed for installations within 5 ft. (1.5M) of outer edge of water 79-15152-00 Rev E2 9.14
Toroidal Conductivity Sensor
Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer
Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve
COMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2751TQ0 (WHITE) CGM2751TQ1 (WHITE) 5 12 Litho in U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. W10119631 Rev. C TOP AND CONSOLE PARTS W10119631 2 TOP AND CONSOLE
Fiberstars Lighted Laminar Flow Fountain Installation Manual
Fiberstars Lighted Laminar Flow Fountain Installation Manual 79-15037-00 REV Xx http://www.fiberstars.com Page 1 of 8 SAVE THESE DIRECTIONS! These directions are provided to ensure the proper installation
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
COMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2941TQ0 CGM2941TQ1 07 08 Litho in U.S.A. (LT)(mek) c 2008 WHIRLPOOL CORPORATION Part No. Rev. B BULKHEAD PARTS (White) (White) 2 BULKHEAD PARTS 1 Literature Parts 8563800
WATER PRESSURE REDUCING VALVES
MADE IN THE USA WATER PRESSURE REDUCING VALVES TABLE OF CONTENTS PRODUCT PAGE How Pressure Reducing Valves Work 3 36 Series 4 36C Series 6 36H Series 8 AUTOMATIC PRESSURE REDUCTION Pressure reducing valves
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
MODEL 201 225LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011
STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
TECHNICAL DATA. Dry 122a. November 12, 2013
Dry 122a 1. PRODUCT DESCRIPTION The Viking is a quick-opening device. When installed with the required external Anti-flood Device, the assembly is designed to increase the operating speed of Viking Model
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
Standard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
Aprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
Rental Services Temporary Cooling - Flexible Water Hose
Engineering Bulletin Rental Services Temporary Cooling - Flexible Water Hose September 2006 CHS-PRB007-EN Warnings and Cautions Warnings and Cautions. Notice that warnings and cautions appear at appropriate
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
TECHNICAL DATA. 2. LISTINGS AND APPROVALS See Tables 1 & 2.
May 3, 2013 Foam 138a 1. DESCRIPTION Chemguard Water Powered Oscillating Monitors are designed to automatically discharge over a specific design area upon system activation. These are suitable for use
SPECIFICATIONS FOR COLD WATER METERS DISPLACEMENT TYPE REVISED March 2013
30-01 SAN ANTONIO WATER SYSTEM SAN ANTONIO, TEXAS SPECIFICATIONS FOR COLD WATER METERS DISPLACEMENT TYPE REVISED March 2013 1. SCOPE This specification covers cold-water displacement meters one and one-half
APCO SLOW CLOSING AIR/VACUUM VALVES
BULLETIN 1 JULY 01 APCO SLOW CLOSING AIR/VACUUM VALVES Series 1900 APCO Slow Closing Air/Vacuum s Maximum Air Flow Velocity in Good Pipeline Design The Air/Vacuum operates in the normal fashion allowing
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
MOBILE FIRE - RESCUE DEPARTMENT FIRE CODE ADMINISTRATION
MOBILE FIRE - RESCUE DEPARTMENT FIRE CODE ADMINISTRATION Fire Pump Plan Review 2009 International Fire Code and NFPA 20 Date of Review / / BLD201 - Project Address: Project Name: Contractor s Business
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409
Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com MASTER MANUFACTURING MASTER GARDNER
123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com MASTER MANUFACTURING MASTER GARDNER Part Number PCD E3 009B MM Rev 1 Nov. 2010 INTRODUCTION The purpose of this manual
Fire Pump Plan Review March 2010
Fire Pump Plan Review March 2010 Date of Review: / / Permit Number: Business/Building Name: Address of Project: Designer Name: Designer s Phone: Contractor: Contractor s Phone: Occupancy Classification:
HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
One Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty
One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable
8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height...............................7 Cover Disk...............................9
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
VE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
Price Book - Section 20 Miscellaneous
Effective Date Price Book - Central - 4" Dry Pipe Valve Model AF or AG (2002) (each) Valve Cover 40002000 $564.50 Cover Bolts (Purchase 6 Units Each) 60003000 $15.50 Cover Gasket 40004000 $139.00 Clapper
RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE
RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw
THE JERSEY CITY MUNICIPAL UTILITIES AUTHORITY REQUIREMENTS FOR FIRE AND DOMESTIC WATER LINE AND METER INSTALLATIONS
THE JERSEY CITY MUNICIPAL UTILITIES AUTHORITY REQUIREMENTS FOR FIRE AND DOMESTIC WATER LINE AND METER INSTALLATIONS 1) All fire service applications and all domestic service applications two (2) inches
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
BOWIE PUMPS OPERATION - MAINTENANCE
BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped
Contents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
SIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following
Selection and Use of Water Meters for Irrigation Water Measurement 1
ABE18 Selection and Use of Water Meters for Irrigation Water Measurement 1 Melissa C. Baum, Michael D. Dukes, and Dorota Z. Haman 2 The demand for water by agriculture, industry, urban users, and recreation
BACKFLOW PREVENTION Product Catalog
BACKFLOW PREVENTION Product Catalog FEBCO is an ISO 9001 Certified manufacturer of high quality fluid control products. For over 80 years FEBCO has been committed to manufacturing excellence and innovative
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
Innovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
TS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
Model 5600SE Downflow
Service Manual IMPORTANT: Fill in pertinent information on page 3 for future reference. Table of Contents Job Specification Sheet...................................................................................
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard