STP120NF10, STB120NF10 STF120NF10, STW120NF10

Transcription

1 STP120NF10, STB120NF10 STF120NF10, STW120NF10 N-channel 100 V, Ω, 110 A STripFET II Power MOSFET in TO-247, TO-220, D²PAK, TO-220FP Features Type V DSS R DS(on) max I D STW120NF10 STP120NF10 STB120NF10 STF120NF10 100V <0.0105Ω 110 A 110 A 110 A 41 A D²PAK 1 3 TO-247 Exceptional dv/dt capability 100% avalanche tested Application oriented characterization Application TO TO-220FP Switching applications Description These devices are N-channel Power MOSFET realized with STMicroelectronics unique STripFET process has specifically been designed to minimize the on-resistance. It is therefore suitable as primary switch in advanced high-efficiency, high-frequency isolated DC-DC converters for telecom and computer application. It is also intended for any applications with low gate drive requirements. Figure 1. Internal schematic diagram Table 1. Device summary Order codes Marking Packages Packaging STB120NF10 B120NF10 D²PAK Tape and reel STF120NF10 120NF10 TO-220FP STP120NF10 P120NF10 TO-220 STW120NF10 W120NF10 TO-247 Tube May 2011 Doc ID 9522 Rev 7 1/

2 Contents STB/F/PW120NF10 Contents 1 Electrical ratings Electrical characteristics Electrical characteristics (curves) Test circuits Package mechanical data Packaging mechanical data Revision history /21 Doc ID 9522 Rev 7

3 STB/F/PW120NF10 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Value Unit Symbol Parameter TO-220, TO-247, D²PAK TO-220FP V DS Drain-source voltage (V GS = 0) 100 V V GS Gate-source voltage ± 20 V I D Drain current (continuous) at T C = 25 C (1) A I D Drain current (continuous) at T C =100 C (1) A I DM (2) Drain current (pulsed) (1) A P TOT Total dissipation at T C = 25 C W Derating factor W/ C dv/dt (3) E AS (4) Peak diode recovery voltage slope 10 V/ns Single pulse avalanche energy 550 mj T J T stg Operating junction temperature Storage temperature -55 to 175 C 1. Limited only by maximum temperature allowed. 2. Pulse width limited by safe operating area. 3. I SD 120 A, di/dt 300 A/µs, V DD = 80%V (BR)DSS 4. Starting Tj = 25 C, I D = 60 A, V DD = 50 V Table 3. Thermal resistance Symbol Parameter Value TO-220 TO-247 D²PAK TO-220FP Unit R thj-case Thermal resistance junction-case max C/W R thj-amb Thermal resistance junction-ambient max C/W R thj-pcb (1) Thermal resistance junction-pcb max 35 C/W T L Maximum lead temperature for soldering purpose C 1. When mounted on 1inch² FR-4 board, 2 oz Cu Doc ID 9522 Rev 7 3/21

4 Electrical characteristics STB/F/PW120NF10 2 Electrical characteristics (T CASE = 25 C unless otherwise specified) Table 4. On/off states Symbol Parameter Test conditions Min. Typ. Max. Unit V (BR)DSS Drain-source breakdown voltage I D = 250 µa, V GS = V I DSS Zero gate voltage drain current (V GS = 0) V DS = Max rating, V DS = Max rating@125 C 1 10 µa µa I GSS Gate body leakage current (V DS = 0) V GS = ±20 V ±100 na V GS(th) Gate threshold voltage V DS = V GS, I D = 250 µa 2 4 V R DS(on) Static drain-source on resistance V GS = 10V, I D = 60 A (1) Ω 1. For TO-220FP I D = 40 A Table 5. Dynamic Symbol Parameter Test conditions Min. Typ. Max. Unit g fs (1) Forward transconductance V DS =25 V, I D = 60 A - 90 S C iss C oss C rss Input capacitance Output capacitance Reverse transfer capacitance V DS =25 V, f=1 MHz, V GS = pf pf pf Q g Q gs Q gd Total gate charge Gate-source charge Gate-drain charge V DD =80 V, I D = 120 A V GS =10 V (see Figure 16) nc nc nc 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/21 Doc ID 9522 Rev 7

5 STB/F/PW120NF10 Electrical characteristics Table 6. Switching times Symbol Parameter Test conditions Min. Typ. Max. Unit t d(on) t r t d(off) t f Turn-on delay time Rise time Turn-off delay time Fall time V DD =50 V, I D = 60 A, R G =4.7 Ω, V GS =10 V (see Figure 15) ns ns ns ns Table 7. Source drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit I SD Source-drain current A I SDM (1) V SD (2) Source-drain current (pulsed) A Forward on voltage I SD =120 A, V GS =0-1.3 V t rr Q rr I RRM Reverse recovery time Reverse recovery charge Reverse recovery current I SD =120 A, di/dt = 100 A/µs, V DD =40 V, Tj=150 C (see Figure 20) ns nc A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% Doc ID 9522 Rev 7 5/21

6 Electrical characteristics STB/F/PW120NF Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characterisics Figure 7. Transfer characteristics 6/21 Doc ID 9522 Rev 7

7 STB/F/PW120NF10 Electrical characteristics Figure 8. Normalized B VDSS vs temperature Figure 9. Static drain-source on resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on resistance vs temperature Doc ID 9522 Rev 7 7/21

8 Electrical characteristics STB/F/PW120NF10 Figure 14. Source-drain diode forward characteristics 8/21 Doc ID 9522 Rev 7

9 STB/F/PW120NF10 Test circuits 3 Test circuits Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit VDD VGS VD RG RL D.U.T µf 3.3 µf VDD Vi=20V=VGMAX 2200 µf 12V IG=CONST 2.7kΩ 47kΩ 100Ω 100nF D.U.T. 1kΩ VG PW 47kΩ PW 1kΩ AM01468v1 AM01469v1 Figure 17. Test circuit for inductive load switching and diode recovery times Figure 18. Unclamped inductive load test circuit 25 Ω G A D D.U.T. S B A FAST DIODE B A B D L=100µH µf µf VDD VD ID L 2200 µf 3.3 µf VDD G RG S Vi D.U.T. AM01470v1 Pw AM01471v1 Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform V(BR)DSS ton toff VD tdon tr tdoff tf ID IDM 0 90% 10% VDS 10% 90% VDD VDD VGS 90% AM01472v1 0 10% AM01473v1 Doc ID 9522 Rev 7 9/21

10 Package mechanical data STB/F/PW120NF10 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 10/21 Doc ID 9522 Rev 7

11 STB/F/PW120NF10 Package mechanical data Table 8. Dim. TO-220FP mechanical data mm Min. Typ. Max. A B D E F F F G G H L2 16 L L L L L Dia Figure 21. TO-220FP drawing L7 E A B Dia L6 L5 D F1 F2 F H G1 G L2 L4 L _Rev_K Doc ID 9522 Rev 7 11/21

12 Package mechanical data STB/F/PW120NF10 Table 9. Dim. D²PAK (TO-263) mechanical data mm Min. Typ. Max. A A b b c c D D E E e 2.54 e H J L L L R 0.4 V /21 Doc ID 9522 Rev 7

13 STB/F/PW120NF10 Package mechanical data Figure 22. D²PAK (TO-263) drawing _R Figure 23. D²PAK footprint (a) Footprint a. All dimension are in millimeters Doc ID 9522 Rev 7 13/21

14 Package mechanical data STB/F/PW120NF10 Table 10. Dim. TO-220 type A mechanical data mm Min. Typ. Max. A b b c D D E e e F H J L L L L P Q /21 Doc ID 9522 Rev 7

15 STB/F/PW120NF10 Package mechanical data Figure 24. TO-220 type A drawing _typeA_Rev_S Doc ID 9522 Rev 7 15/21

16 Package mechanical data STB/F/PW120NF10 Table 11. Dim. TO-247 mechanical data mm Min. Typ. Max. A A b b b c D E e 5.45 L L L P R S /21 Doc ID 9522 Rev 7

17 STB/F/PW120NF10 Package mechanical data Figure 25. TO-247 drawing _F Doc ID 9522 Rev 7 17/21

18 Packaging mechanical data STB/F/PW120NF10 5 Packaging mechanical data Table 12. D²PAK (TO-263) tape and reel mechanical data Tape Reel Dim. mm mm Dim. Min. Max. Min. Max. A A 330 B B 1.5 D C D D 20.2 E G F N 100 K T 30.4 P P Base qty 1000 P Bulk qty 1000 R 50 T W /21 Doc ID 9522 Rev 7

19 STB/F/PW120NF10 Packaging mechanical data Figure 26. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T Top cover tape P0 D P2 E K0 B0 F W A0 P1 D1 User direction of feed R User direction of feed Bending radius AM08852v2 Figure 27. Reel REEL DIMENSIONS T 40mm min. Access hole At sl ot location B D C A N Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Doc ID 9522 Rev 7 19/21

20 Revision history STB/F/PW120NF10 6 Revision history Table 13. Revision history Date Revision Changes 20-Mar Preliminary datasheet 31-Mar Typing error 19-Jun New template, no content change 28-Jun New I D value on Table 2 05-Oct New value on Table 7 11-May Added new package and mechanicala data: TO-220FP. 20/21 Doc ID 9522 Rev 7

21 STB/F/PW120NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America Doc ID 9522 Rev 7 21/21