surfaces Cut Lead spacing Diameter d 1 Type
|
|
|
- Barnaby Lucas
- 7 years ago
- Views:
Transcription
1 Metallized Polyester Film Capacitors (MKT) Partially Coated (Silver Blue Caps) B B Small dimensions Insulated face ends Versions with special dimensions can be supplied at short notice Construction Dielectric: polyethylene terephthalate (polyester) Stacked-film technology Insulated face ends Features Special dimensions available upon request High pulse strength Coating material covers the leads for a length of 0,8 mm from the capacitor body Typical applications Standard applications Lamp ballast circuits Energy-saving lamps Terminals Parallel wire leads, tinned Also available with (3,0 ± 0,5) mm lead length upon request Taped versions also available with crimped leads Marking Rated capacitance (coded), rated dc voltage Cut surfaces Delivery mode Bulk (untaped) Taped, with straight leads or crimped leads (Ammo pack or reel) Capacitors with 7,5 mm lead spacings (taped versions) can be supplied with leads bent to fit 5 mm grids. For notes on taping, refer to page 279. Detail specification Homologated in accordance with CECC Dimensions in mm Lead spacing Diameter d 1 Type ± 0,4 7,5 0,5 B ,0 0,5 B ,0 0,6 B Notes on mounting When mounting these capacitors, take into account creepage distances and clearances to adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1,5 times the capacitor s rated dc voltage, but is always at least 300 Vdc. 42 Siemens Matsushita Components
2 B B MKT Overview of available types Lead spacing 7,5 mm 10 mm 15 mm Type B B B Page ,0 nf 1,5 nf 2,2 nf 3,3 nf 4,7 nf 6,8 nf 10 nf 15 nf 22 nf 33 nf 47 nf 68 nf 0,10 µf 0,15 µf 0,22 µf 0,33 µf 0,47 µf 0,68 µf 1,0 µf 1,5 µf 2,2 µf 3,3 µf 4,7 µf 6,8 µf 10 µf 63 Vdc Siemens Matsushita Components 43
3 MKT B ,5 Ordering codes and packing units, lead spacing 7,5 mm V R (, f 60 Hz) 63 Vdc (40 Vac) (63 Vac) (160 Vac) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,22 µf 2,6 6,4 10,0 B32510-J224-+ *** ,33 µf 3,0 6,8 10,0 B32510-J334-+ *** ,47 µf 3,4 7,0 10,0 B32510-J474-+ *** ,68 µf 4,0 7,4 10,0 B32510-J684-+ *** ,0 µf 4,8 8,0 10,0 B32510-J105-+ *** ,5 µf 5,9 8,8 10,0 B32510-J155-+ *** ,2 µf 7,3 9,4 10,0 B32510-J225-+ *** ,10 µf 3,0 5,9 10,0 B32510-J *** ,15 µf 3,0 5,9 10,0 B32510-J *** ,22 µf 3,0 6,3 10,0 B32510-J *** ,33 µf 3,5 6,9 10,0 B32510-J *** ,47 µf 4,2 7,3 10,0 B32510-J *** ,68 µf 5,0 7,7 10,0 B32510-J *** ,0 µf 6,3 8,2 10,0 B32510-J *** ,5 µf 7,5 9,4 10,0 B32510-J *** nf 3,0 6,0 10,0 B32510-J *** nf 3,0 6,4 10,0 B32510-J *** nf 3,4 6,9 10,0 B32510-J *** ,10 µf 4,0 7,3 10,0 B32510-J *** ,15 µf 4,7 8,2 10,0 B32510-J *** ,22 µf 5,7 8,7 10,0 B32510-J *** ,33 µf 7,2 9,4 10,0 B32510-J *** ) For instructions on how to determine the ordering code, see next page. 44 Siemens Matsushita Components
4 B MKT 7,5 Ordering codes and packing units, lead spacing 7,5 mm V R (, f 60 Hz) (200 Vac) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf 3,0 6,7 10,0 B32510-J *** ,5 nf 3,0 6,7 10,0 B32510-J *** ,2 nf 3,0 6,7 10,0 B32510-J *** ,3 nf 3,0 6,7 10,0 B32510-J *** ,7 nf 3,0 6,7 10,0 B32510-J *** ,8 nf 3,0 6,7 10,0 B32510-J *** nf 3,0 6,7 10,0 B32510-J *** nf 3,0 6,7 10,0 B32510-J *** nf 3,0 6,7 10,0 B32510-J *** nf 3,4 7,2 10,0 B32510-J *** nf 4,0 7,7 10,0 B32510-J *** nf 4,6 8,5 10,0 B32510-J *** ,10 µf 5,7 8,9 10,0 B32510-J *** ,15 µf 7,3 9,4 10,0 B32510-J *** Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J Special dimensions available upon request. For corresponding design rules, refer to page ) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing: - For straight leads: Ammo pack = 289, reel = For crimped leads: Ammo pack = 249, reel = Lead spacing changed from 7,5 to 5 mm by bending leads: Ammo pack = 259, reel = 159 The ordering code for untaped components ends after the tolerance code letter. Siemens Matsushita Components 45
5 MKT B Ordering codes and packing units, lead spacing 10 mm V R (, f 60 Hz) (63 Vac) (160 Vac) (200 Vac) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel 0,33 µf 3,3 6,4 12,5 B32511-J *** ,47 µf 3,7 7,0 12,5 B32511-J *** ,68 µf 4,4 7,5 12,5 B32511-J *** ,0 µf 5,3 8,1 12,5 B32511-J *** ,5 µf 6,4 9,0 12,5 B32511-J *** ,2 µf 7,7 10,2 12,5 B32511-J *** Untaped 47 nf 3,2 5,6 12,5 B32511-J *** nf 3,2 6,0 12,5 B32511-J *** ,10 µf 3,6 6,5 12,5 B32511-J *** ,15 µf 4,1 7,2 12,5 B32511-J *** ,22 µf 5,0 7,8 12,5 B32511-J *** ,33 µf 6,0 8,7 12,5 B32511-J *** ,47 µf 7,1 9,7 12,5 B32511-J *** nf 3,2 6,3 12,5 B32511-J *** nf 3,2 6,3 12,5 B32511-J *** nf 3,2 6,3 12,5 B32511-J *** nf 3,2 6,3 12,5 B32511-J *** nf 3,4 7,2 12,5 B32511-J *** nf 4,0 7,8 12,5 B32511-J *** ,10 µf 4,8 8,1 12,5 B32511-J *** ,15 µf 6,0 8,9 12,5 B32511-J *** ,22 µf 7,4 9,7 12,5 B32511-J *** Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J Special dimensions available upon request. For corresponding design rules, refer to page ) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing form: - For straight leads: Ammo pack = 289, reel = For crimped leads: Ammo pack = 249, reel = 149 The ordering code for untaped components ends after the tolerance code letter. 46 Siemens Matsushita Components
6 B MKT 15 Ordering codes and packing units, lead spacing 15 mm V R (, f 60 Hz) (63 Vac) (160 Vac) (200 Vac) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 1,0 µf 4,2 7,5 17,5 B32512-J *** ,5 µf 5,0 8,5 17,5 B32512-J *** ,2 µf 5,9 9,2 17,5 B32512-J *** ,3 µf 7,0 10,5 17,5 B32512-J *** ,7 µf 8,3 11,8 17,5 B32512-J *** ,8 µf 10,0 13,0 17,5 B32512-J *** µf 12,8 14,2 17,5 B32512-J *** ,22 µf 4,2 6,8 17,5 B32512-J *** ,33 µf 5,0 7,4 17,5 B32512-J *** ,47 µf 6,0 7,9 17,5 B32512-J *** ,68 µf 7,0 9,0 17,5 B32512-J *** ,0 µf 8,0 10,5 17,5 B32512-J *** ,5 µf 9,7 12,2 17,5 B32512-J *** ,2 µf 11,7 14,0 17,5 B32512-J *** ,3 µf 14,9 15,7 17,5 B32512-J *** nf 4,3 6,8 17,5 B32512-J *** nf 4,3 6,8 17,5 B32512-J *** nf 4,3 6,8 17,5 B32512-J *** nf 4,3 6,8 17,5 B32512-J *** ,10 µf 4,3 6,8 17,5 B32512-J *** ,15 µf 4,9 7,7 17,5 B32512-J *** ,22 µf 5,7 8,7 17,5 B32512-J *** ,33 µf 7,0 9,5 17,5 B32512-J *** ,47 µf 8,3 10,5 17,5 B32512-J *** ,68 µf 9,9 12,0 17,5 B32512-J *** ,0 µf 11,9 13,7 17,5 B32512-J *** Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J Special dimensions available upon request. For corresponding design rules, refer to page ) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required packing:. - For straight leads: Ammo pack = 289, reel = For crimped leads: Ammo pack = 249, reel = 149 The ordering code for untaped components ends after the tolerance code letter. Siemens Matsushita Components 47
7 MKT B B Technical data Climatic category in accordance with IEC /100/56 1) 55 C Lower category temperature T min Upper category temperature T max C Damp heat test 56 days/40 C/93 % relative humidity Limit values after damp Capacitance change C/C 5 % heat test 1) Dissipation factor change tan δ (at 1 khz) (at 10 khz) Insulation resistance R is 50 % of minimum or time constant τ = C R R is as-delivered values Reliability: Reference conditions Failure rate Service life Failure criteria: Total failure Failure due to variation of parameters DC test voltage Category voltage V C Operation with dc voltage or ac voltage up to 60 Hz Category voltage for short operating periods Dissipation factor tan δ (in 10 3 ) at 20 C (upper limit values) Insulation resistance R is or time constant τ = C R R is at 20 C, rel. humidity 65 % (minimum as-delivered values) 0,5 V R ;40 C /h = 2 fit For a conversion table for other operating conditions and temperatures, refer to page h Short circuit or open circuit Capacitance change C/C > 10 % Dissipation factor tan δ > 2 upper limit value Insulation resistance R is < 150 MΩ (C R 0,33 µf) or time constant τ = C R R is < 50 s (C R > 0,33 µf) 1,4 V R, 2 s T 85 C: V C = 1,0 V R or 1,0 T 100 C: V C = 0,8 V R or 0,8 T 100 C: V C = 1,25 V R or 1,0 for max h T 125 C: V C = 0,5 V R or 0,5 for max h C R 0,1 µf 0,1 µf < C R 1 µf C R > 1 µf at 1 khz khz khz 30 V R C R 0,33 µf C R > 0,33 µf 3750 MΩ 1250 s 7500 MΩ 2500 s 1) According to CECC , test criteria must be met after exposure to damp heat for 21 days. 48 Siemens Matsushita Components
8 B B MKT Impedance Z versus frequency f (typical values) Pulse handling capability Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth) V R Max. rate of voltage rise V pp /τ in V/µs (for V pp = V R ) Lead spacing 7,5 mm 10 mm 15 mm 63 Vdc For V pp < V R, the permissible voltage rise rate value V pp /τ may be multiplied by the factor V R /V pp. Also refer to the calculation example on page 250. V R Pulse characteristic k 0 in V 2 /µs (for V pp V R ) Lead spacing 7,5 mm 10 mm 15 mm 63 Vdc Siemens Matsushita Components 49
9 MKT B ,5 Permissible ac voltage versus frequency f Lead spacing 7,5 mm 63 Vdc/ 40 Vac / 63 Vac / 160 Vac / 200 Vac 50 Siemens Matsushita Components
10 B MKT 10 Permissible ac voltage versus frequency f Lead spacing 10 mm / 63 Vac / 160 Vac / 200 Vac Siemens Matsushita Components 51
11 MKT B Permissible ac voltage versus frequency f Lead spacing 15 mm / 63 Vac / 160 Vac / 200 Vac 52 Siemens Matsushita Components
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
DC Film Capacitor MKT Radial Potted Type
MKT 370 l w FEATURES Available taped and loose in box RoHS compliant h ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) P ± 0.3 Dimensions in mm l t Ø d t CLIMATIC TESTING CLASS
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
QUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
SUCCESS EPCOS Capacitors
SUCCESS EPCOS Inc. Capacitors Group April, 2012 EV / HV / E-Mobility Battery charger system & Inverter On Board and Off Board Assembly Trend: Wireless Charging DC/DC Converter Filtering DC Link E-Mobility
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
Metallized Polypropylene Film Capacitors DC-Link Capacitor
Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,
PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCL ECO, 18 80 W Compact and T5c fluorescent lamps
Product description Noise-free precise control via DSI signal or switchdim CELMA energy class A1 1) Interfaces DSI switchdim Integrated SMART-Interface Functions Optimum filament heating in any dimmer
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
Polymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
FILM CAPACITORS FOR ELECTRONIC LIGHTING
1. Introduction: FILM CAPACITORS FOR ELECTRONIC LIGHTING G. Schabbach, Dr. K. Weigel, Dr. G. Zimmermann EPCOS AG Fluorescent lamps have emerged as the preferred light source for industrial and domestic
X and Y Capacitors. Copyright 2008 KEMET
X and Y Capacitors X Capacitors Two Major Types: X2 and X1 X2 capacitors Agency tested with 2,500 volt surge test. Satisfies 99% of the applications. X1 capacitors Agency tested with 4,000 volt surge test.
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
Interference Suppression Film Capacitors MKP Radial Potted Type
MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass
PHASED OUT. Digital dimmable ballasts for fluorescent lamps EXCEL one4all series. PCA TCL EXCEL one4all, 18 80 W Compact and T5c fluorescent lamps
EXCEL oneall series Product description Noise-free precise control via DSI signal, switchdim, corridorfunction or DALI DALI-MEMORY Extended DALI commands CELMA energy class A1 1) Interfaces DALI DSI switchdim
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
Electronic ballasts for fluorescent lamps Products for special applications. PC BASIC, 4 28 W Electronic ballast for system output < 25 W
T5 TC-DEL TC-SEL TC-TEL TC-DD PC BASIC, 4 28 W Electronic ballast for system output < 25 W Product description CELMA Energy Efficiency Index A2 / A3 Nominal life time up to 50,000 h (at ta 50 C with a
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
Ordering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
How To Read A Pipe From A Sensor
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
High Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD)
Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD) Note: This guidance document is a translation of official Chinese document which is issued by CQC (China Quality Certification Center) on
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
FL ballasts Electronic dimming. PCA T5 BASIC lp Y II, 14 80 W BASIC T5
T5 TC-L PCA T5 BASIC lp Y II, 1 80 W BASIC T5 Product description Processor-controlled ballast with y II inside Highest possible energy class CELMA EEI = A1 BAT 1 Noise-free precise control via DSI signal,
Film Capacitors AC Capacitors
Series/Type: Ordering code: Date: Nov 2012 Version: 9 Super MotorCap, 450 V Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
Application Guide Film Capacitors
Capacitance Change vs. Temperature Insulation Resistance vs. Temperature Polyester Typical Characteristics at 1 khz % Capacitance Change % Capacitance Change Polypropylene Typical Characteristics at 1
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Mylar polyester film. Electrical Properties. Product Information. Dielectric Strength. Electrode Size. Film Thickness
Product Information Mylar polyester film Electrical Properties Mylar offers unique design capabilities to the electrical industry due to the excellent balance of its electrical properties with its chemical,
DATA SHEET THICK FILM CHIP RESISTORS Introduction
DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
Film Capacitors SELF-HEALING
Film Capacitors FILM CAPACITORS Plastic film capacitors are generally subdivided into film/foil capacitors and metalized film capacitors. FILM/FOIL CAPACITORS Film/foil capacitors basically consist of
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a
3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max
1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS
2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
Kit 106. 50 Watt Audio Amplifier
Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications
Signal Relays AXICOM. P2 Relay V23079. AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data
P Relay V379 n Standard telecom relay (ringing and test access) n Slim line 5x7.5mm (.59x.95 ) n Max. switching current 5A n form C bifurcated contacts ( changeover contacts, CO) n Immersion cleanable
SECTION 13. Multipliers. Outline of Multiplier Design Process:
SECTION 13 Multipliers VMI manufactures many high voltage multipliers, most of which are custom designed for specific requirements. The following information provides general information and basic guidance
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase
I-PEX MHF4 Micro Coaxial Connector
PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
High Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
unit : mm With heat sink (see Pd Ta characteristics)
Ordering number: EN1321E Monolithic Linear IC LA4261 3.5 W 2-Channel AF Power Amplifier for Home Stereos and Music Centers Features. Minimum number of external parts required (No input capacitor, bootstrap
FP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
Part number NPN E2EM-X2C1 E2EM-X2C2 PNP E2EM-X2B1 E2EM-X2B2 NPN E2EM-X4C1 E2EM-X4C2 PNP E2EM-X4B1 E2EM-X4B2
R Extended Range Inductive Prox Greater Sensing Distance Offers Greater Design Flexibility H Sensing distances approximately 1.5 to 2 times larger than that of any conventional Sensor H Reduces problems
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
DATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
HIGH VOLTAGE CERAMIC CAPACITORS
!Note Please read rating and!caution (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. C84E8.pdf 03.4.21 This catalog has only
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
3-phase, bidirectional energy meter
Data sheet www.sbc-support.com 3-phase, bidirectional energy meter with S0 pulse output Bidirectional energy meter with S0-interface. The S0 interface is a hardware interface for the transmission of measured
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
FL ballasts Electronic dimming. PCA T5 EXCEL one4all lp Y II, 14 80 W EXCEL T5
E T5 TC- PCA T5 EXCE oneall lp Y II, 1 80 W EXCE T5 Product description Processor-controlled ballast with y II inside Highest possible energy class CEMA EEI = A1 BAT 1 oise-free precise control via I or
Knob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
User s Manual Before using the inverter, you need to read and save the safety instructions.
User s Manual Before using the inverter, you need to read and save the safety instructions. STI SERIES (STI200, STI300, STI500, STI700, STI1000) Power Frequency Pure Sine Wave Inverter The information
Capacitors for A.C. motor applications
Capacitors for A.C. motor applications Contents Page General information 2 to 7 Capacitor selection guide 8 to 10 Plastic case series 11 to 37 Metalcaseseries 39to52 Boxseries 53to56 Mechanical drawings
Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.
Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
2N4401. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS THERMAL CHARACTERISTICS
General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V CBO 6 Vdc Emitter
V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules