Photoelectric Sensor

Transcription

1 Photoelectric Sensor Small General-purpose Photoelectric Sensor with Built-in Power Supply Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only 50 x 50 x 17.4 mm. Relay outputs with long life expectancy and high switching capacity (3 A, 250 VAC). Polarized retroreflective type available for glossy or shiny object detection. Ordering Information Relay Output Types Item Through-beam (separate) Retroreflective Diffuse reflective Model -ON mode -5M1 -R2M1 -R4M1 -R3M1-01 -DS30M1 Dark-ON mode -5M2 -R2M2 -R4M2 -R3M2-01 -DS30M2 Polarized light beam --- Yes No --- Sensing distance 5m 2.5 m 4m 3m 30 cm DC Solid-state Output Types Item Through-beam (separate) Retroreflective Diffuse reflective Model Sink current to -5S3 -R2S3 -R4S3 -DS30S3 negative common Source current to positive common --- -R2R Polarized light beam --- Yes No --- Sensing distance 5m 2.5 m 4m 30 cm Transistor Output Types Item Retroreflective Model -ON mode -R2H1-G Dark-ON mode -R2H2-G Polarized light beam Yes Sensing distance 2.5 m 1

2 Specifications Ratings/Characteristics Amplifier Units Item -5jj -R2jj -R4jj -R3jj -DS30jj -R2Hj-G Power supply voltage 12 to 240 VDC!10%, 24 to 240 VAC!10%, 50/60 Hz 24 VDC/AC!10%, ripple (p-p): 10% max., 50/60 Hz 12 to 240 VDC!10%, 24 to 240 VAC!10%, 50/60 Hz 10 to 30 VDC, ripple (p-p): 10% max. Current consumption 3Wmax. 2Wmax. 1.5 W max. 2Wmax. 40 ma max. Sensing distance 5m 2.5 m (see note 1), 3m (see note 2) 4m (see note 1), 5m (see note 2) 3m (see note 1), 4 m (see note 2) 30 cm 2.5 m (see note 1) Differential travel % max. --- Control output Relay output 3 A max. at 250 VAC (cos" = 1), 10 ma min. at 5 VDC Transistor output: open collector (NPN/PNP): DC solid-state 100 ma at 48 VDC; leakage current: 0.1 ma max. 100 ma at 30 VDC; Voltage drop: 1Vmax. Response time (ON, 30 ms max. 3msmax. OFF) Sensitivity Fixed Adjustable Fixed Operation mode -ON or Dark-ON Indicators (red) Enclosure rating IEC IP64, NEMA 1, 2, 12 Material Plastic source Infrared LED Red LED Infrared LED Red LED Ambient temperature Operating: --25#C to55#c (with no icing) Note: 1. With reflector E39-R1 2. With reflector E39-R2 2

3 Engineering Data Excess Gain Ratio -5jj -R2jj -R4jj Excess gain ratio Excess gain ratio Excess gain ratio -DS30jj Sensing distance (m) Operating Range -5jj Sensing distance (m) -DS30jj Sensing distance (m) Optical axis Excess gain ratio Operating position Y (cm) Emitter X Y Receiver Optical axis Operating position Y (mm) X Y White mat paper (10 x 10 cm) Sensing distance (cm) Sensing distance X (m) Sensing distance X (cm) -R2jj -R4jj Sensitivity -DS30jj Operating position Y (cm) X Y Optical axis Reflector Operating position Y (cm) X Y Optical axis Reflector Sensing distance Y (mm) Sensing distance X (m) Sensing distance X (m) Area of object (cm 2 ) 3

4 Operation Output Circuits Relay Output Types Transistor Output Types indicator (red) Main Brown Power source Blue (any polarity ) White 24 to 240 VAC 12 to 240 VDC indicator (red) Main Z Z Brown Black (PNP) 100 ma max. 10 to 30 VDC 100 ma max. ---COM Black ---NO Relay output (see note) Z Orange (NPN) Blue 0V Gray ---NC Vz = 47 V Note: Not provided to the emitter of the -5Mj. DC Solid-state Output Types Negative Common Brown Power source 24 to 240 VAC 12 to 240 VDC Blue Drive Gray (D-ON) Main Drive Black (L-ON) 48 VDC White Positive Common Brown Power source 24 to 240 VAC 12 to 240 VDC Blue White Main Drive Drive Black (L-ON) Gray (D-ON) 4

5 Timing Chart Relay Output Types Transistor Output Types Incident Interrupted Incident Interrupted Indicator ON OFF Indicator ON OFF -ON (-jjm1) Operates Releases -ON (-R2H1) ON OFF Dark-ON (-jjm2) Operates Releases Dark-ON (-R2H2) ON OFF DC Solid-state Output Types Indicator -ON (Black-White) Dark-ON (Gray-White) 5

6 Dimensions Note: All units are in millimeters unless otherwise indicated. -5jj Weight: approx. 360 g Sensitivity adjuster (built-in diffuse reflective models only) -R2jj -R3jj -R4jj -DS30jj Weight: approx. 190 g dia Mounting Holes A (see note) Indicator Lens Two, M Emitter Optical axis R Cord 42!0.2 Receiver 10# 58 Note: The mounting bracket (provided with two M4 x 20 screws) can be connected to side A. Reflectors E39-R1 (Supplied with Retroreflective Types) E39-R2 (Order Separately) Two, 3.5 dia. holes Four, 3.5 dia

7 7

8 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. E027-E1-7B OMRON Corporation Industrial Sensors Division Sensing Devices and Components Division H.Q. 28th Fl., Crystal Tower Bldg , Shiromi, Chuo-ku, Osaka 540 Japan Phone: (81) Fax: (81) In the interest of product improvement, specifications are subject to change without notice. Printed in Japan M (0394) a 8