European Technical Assessment. ETA-11/0493 of 15 April English translation prepared by DIBt - Original version in German language.
|
|
- Fay Porter
- 7 years ago
- Views:
Transcription
1 European Technical Assessment ETA-11/0493 of 15 April Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut für Bautechnik Trade name of the construction product Injection system Hilti HIT-HY 200-A Product family to which the construction product belongs Manufacturer Manufacturing plant Bonded anchor with threaded rods, rebar, internal threaded sleeves and Hilti tension anchor HZA for use in concrete Hilti Aktiengesellschaft 9494 SCHAAN FÜRSTENTUM LIECHTENSTEIN Hilti Werke This European Technical Assessment contains This European Technical Assessment is issued in accordance with Regulation (EU) No 305/2011, on the basis of 33 pages including 3 annexes Guideline for European technical approval of "Metal anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011. Z /14
2 European Technical Assessment ETA-11/0493 Page 2 of April 2015 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and shall be identified as such. Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may only be made with the written consent of the issuing Technical Assessment Body. Any partial reproduction has to be identified as such. This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in particular pursuant to information by the Commission according to Article 25 Paragraph 3 of Regulation (EU) No 305/2011. Z /14
3 European Technical Assessment ETA-11/0493 Page 3 of April 2015 Specific Part 1 Technical description of the product The Injection system Hilti HIT-HY 200-A is a bonded anchor consisting of a foil pack with injection mortar Hilti HIT-HY 200-A and a steel element. The steel element consist of a threaded rod HIT-V or a commercial threaded rod with washer and hexagon nut in the range of M8 to M30 or an internal threaded sleeve HIS-(R)N in the range of M8 to M20 or Hilti tension anchor HZA M12 to M27 Hilti tension anchor HZA-R M12 to M24 or Reinforcing bar (rebar) of sizes = 8 to 32 mm. The steel element is placed into a drilled hole filled with injection mortar and is anchored via the bond between metal part, injection mortar and concrete. The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) Essential characteristic Characteristic resistance under static and quasi-static action for design according to TR 029, displacements Characteristic resistance for seismic performance category C1 for design according to TR 045, displacements 3.2 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance See Annex C1 to C12 See Annex C13 to C15 Performance Anchorages satisfy requirements for Class A1 No performance determined (NPD) Z /14
4 European Technical Assessment ETA-11/0493 Page 4 of April Hygiene, health and the environment (BWR 3) Regarding dangerous substances there may be requirements (e.g. transposed European legislation and national laws, regulations and administrative provisions) applicable to the products falling within the scope of this European Technical Assessment. In order to meet the provisions of Regulation (EU) No 305/2011, these requirements need also to be complied with, when and where they apply. 3.4 Safety in use (BWR 4) The essential characteristics regarding Safety in use are included under the Basic Works Requirement Mechanical resistance and stability. 3.5 Protection against noise (BWR 5) Not applicable. 3.6 Energy economy and heat retention (BWR 6) Not applicable. 3.7 Sustainable use of natural resources (BWR 7) The sustainable use of natural resources was not investigated. 3.8 General aspects The verification of durability is part of testing the essential characteristics. Durability is only ensured if the specifications of intended use according to Annex B are taken into account. 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base According to Decision of the Commission of 24 June 1996 (96/582/EC) (OJ L 254 of p ), the system of assessment and verification of constancy of performance (see Annex V and Article 65 Paragraph 2 to Regulation (EU) No 305/2011) given in the following table applies. Product Intended use Level or class System Metal anchors for use in concrete (heavy-duty type) For fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings 1 5 Technical details necessary for the implementation of the AVCP system, as provided for in the applicable European Assessment Document Technical details necessary for the implementation of the AVCP system are laid down in the control plan deposited at Deutsches Institut für Bautechnik. Issued in Berlin on 15 April 2015 by Deutsches Institut für Bautechnik Uwe Bender Head of Department beglaubigt: Lange Z /14
5 Page 5 of European Technical Assessment
6 Page 6 of European Technical Assessment
7 Page 7 of European Technical Assessment
8 Page 8 of European Technical Assessment
9 Page 9 of European Technical Assessment
10 Page 10 of European Technical Assessment
11 Page 11 of European Technical Assessment
12 Page 12 of European Technical Assessment
13 Page 13 of European Technical Assessment
14 Page 14 of European Technical Assessment
15 Page 15 of European Technical Assessment
16 Page 16 of European Technical Assessment
17 Page 17 of European Technical Assessment
18 Page 18 of European Technical Assessment
19 Page 19 of European Technical Assessment
20 Page 20 of European Technical Assessment
21 Page 21 of European Technical Assessment
22 Page 22 of European Technical Assessment
23 Page 23 of European Technical Assessment
24 Page 24 of European Technical Assessment
25 Page 25 of European Technical Assessment
26 Page 26 of European Technical Assessment
27 Page 27 of European Technical Assessment
28 Page 28 of European Technical Assessment
29 Page 29 of European Technical Assessment
30 Page 30 of European Technical Assessment
31 Page 31 of European Technical Assessment
32 Page 32 of European Technical Assessment
33 Page 33 of European Technical Assessment
European Technical Assessment. ETA-02/0020 of 22 September 2015. English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-02/0020 of 22 September 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the
More informationEuropean Technical Approval ETA-07/0260
European Technical Approval ETA-07/0260 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Assessment ETA-10/0153 of 10/06/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationEuropean Technical Approval ETA-06/0259
European Technical Approval ETA-06/0259 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-09/0040
European Technical Approval ETA-09/0040 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-98/0001
European Technical Approval ETA-98/0001 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-11/0374
European Technical Approval ETA-11/0374 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Assessment ETA-15/0652 of 27/10/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationEuropean Technical Approval ETA-08/0290
European Technical Approval ETA-08/0290 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-08/0121
European Technical Approval - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and use of construction
More informationEnglish translation prepared by DIBt Original version in German language
Date: Reference: 14.05.2013 I 22-1.21.1-87/12 (73/13) English translation prepared by DIBt Original version in German language Approval number: Validity Z-21.1-1987 from: 14 May 2013 Applicant: Hilti Deutschland
More informationTechnical Application Document. Hilti HIT-RE 500-SD
Technical Application Document Technical Evaluation Report 3/10-649 Injection system for rebar connections Hilti HIT-RE 500-SD Subject to European Technical Approval ATE-09/0295 Holder of approval: HILTI
More information(English language translation, the original version is in French language) Injection system Hilti HIT-HY 150 MAX
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropean Technical Assessment ETA-15/0028 of 23/02/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationEuropean Technical Approval ETA-07/0211
European Technical Approval ETA-07/0211 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropeiskt Tekniskt Godkännande European Technical Approval
SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval ETA-12/0257 Handelsnamn
More informationEuropean Technical Approval ETA-12/0500
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationEuropean Technical Approval ETA-10/0005
European Technical Approval English translation prepared by DIBt - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck
More informationEuropean Technical Approval ETA-01/0013
European Technical Approval ETA-01/0013 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-08/0010
European Technical Approval ETA-08/0010 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationEuropean Technical Approval ETA-08/0266
European Technical Approval ETA-08/0266 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and
More informationEuropean Technical Approval ETA-98/0001
Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts Kolonnenstr. 30 L 10829 Berlin Germany Tel.: +49(0)30 787 30 0 Fax: +49(0)30 787 30 320 E-mail: dibt@dibt.de Internet: www.dibt.de Mitglied
More information(English language translation, the original version is in French language) Hilti HSL-3
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès Champs sur Marne F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropean Technical Approval ETA-10/0200
Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts Kolonnenstr. 30 B 10829 Berlin Germany Tel.: +49(0)30 787 30 0 Fax: +49(0)30 787 30 320 E-mail: dibt@dibt.de Internet: www.dibt.de Mitglied
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu
More informationPage 1 of European Technical Approval ETA-12/0495
Page 1 of European Technical Approval ETA-12/0495 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston
More informationEuropeiskt Tekniskt Godkännande European Technical Approval
SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval Handelsnamn Trade
More informationEuropean Technical Approval ETA-10/0153
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More information(English language translation, the original version is in Czech language) DEWALT PTB-PRO. DeWalt Black-&-Decker Str. 40 65510 Idstein Germany
TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +420 286 019 458 Internet: www.tzus.cz Authorised and notified according to Article 10 of the Council Directive
More informationEuropean Technical Approval ETA-09/0296
Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts Kolonnenstr. 30 L 10829 Berlin Germany Tel.: +49(0)30 787 30 0 Fax: +49(0)30 787 30 320 E-mail: dibt@dibt.de Internet: www.dibt.de Mitglied
More informationHVU with HAS/HAS-E rod adhesive anchor
HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod adhesive anchor Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationHilti HIT-HY 150 MAX with rebar
Hilti HIT-HY 150 MAX Injection mortar system Hilti HIT- HY 150 MAX 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) Static mixer rebar BSt 500 S Benefits - suitable for non-cracked and
More information(English language translation, the original version is in French language) Chemical anchoring system WIT-200
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEurooppalainen tekninen hyväksyntä ETA 01/0003. Sormat Oy Harjutie 5 FIN 21290 Rusko. Sormat Oy Harjutie 5
VTT VALTION TEKNILLINEN TUTKIMUSKESKUS PL 1000 (Lämpömiehenkuja 2) 02044 VTT, FINLAND Puh. +358 20 722 4911 Faksi +358 20 722 6251 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi
More information(English language translation, the original version is in French language) Powers Throughbolt PTB-XL-ETA7-PRO 01/02/2013 31/01/2018.
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropean technical approval ETA-10/0460
- Original version in German language Handelsbezeichnung Trade name fischer termoz LO 8 Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and use of construction
More informationHUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast prestressed hollow core slabs
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast Anchor version HUS-A 6 Screw with hex head HUS-H 6 Screw with hex head HUS-I 6 Screw with hex head Benefits - Quick and easy setting - Low
More informationEuropean Organisation for Technical Approvals
Warrington Certification Limited, Holmesfield Road, Warrington, WA1 2DS Tel. +44 (0) 1925-646777 Fax +44 (0) 1925-646667 Member of EOTA Authorised and notified according to Article 10 of the Council Directive
More informationEuropean Technical Approval ETA 13/0526
European Technical Approval ETA 13/0526 Trade Name Holder of the approval Website Generic type and use of construction product DOLCEA i3 PCIM S.A. Rue du Péquet 54 5590 Achene (Ciney) Belgium www.isoproc.eu
More informationHilti HIT-HY 200 with rebar
Hilti HIT-HY 200 Injection mortar system Benefits Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml) Hilti HIT- HY 200-R 500 ml foil pack (also available as 330 ml) Static mixer rebar BSt
More informationEurooppalainen tekninen hyväksyntä ETA 08/0173 European Technical Approval. Sormat S KA kiila ankkurit Sormat through bolt S KA
VTT VALTION TEKNILINEN TUTKIMUSKESKUS PL 1000 (Kemistintie 3) 02044 VTT Puh. + 358 20 722 4911 Telekopio +358 20 722 6251 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta
More informationPage 1 of European Technical Approval ETA-08/0018
Page 1 of European Technical Approval ETA-08/0018 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
Page 1 of European Technical Approval ETA-09/0129 VTT Valtion Teknillinen Tutkimuskeskus PL 1000 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan
More informationSealfire W1000 Compound. (2 references for the same product) Fire Stopping and Sealing Product: Penetration Seals
UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. Phone : +44 1483 302130 Fax : +44 1483 302230 Email : Inform.NB@uk.ul.com Website
More informationRegulation (EU) No 305/2011 (CPR) and its mechanisms and potential consequences on environmental and sustainability tools in the construction sector
Regulation (EU) No 305/2011 (CPR) and its mechanisms and potential consequences on environmental and sustainability tools in the construction sector 57th LCA Discussion Forum 2 December 2014 Andreas J.
More information(English language translation, the original version is in French language) 01/02/2013 31/01/2018. Plan 1 & 2
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
VTT Expert Services Oy PL 1001 (Kemistintie 3) 02044 VTT Puh. + 358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti
More informationPage 1 of European Technical Approval ETA-09/0129, Issued on September 26, 2011, valid until June 3, 2014
Page 1 of European Technical Approval ETA-09/0129, Issued on September 26, 2011, valid until June 3, 2014 VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin
More informationDIVISION: 04 00 00 MASONRY SECTION: 04 05 19.16 MASONRY ANCHORS REPORT HOLDER: HILTI, INC. 7250 DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-3342 Reissued 08/2015 This report is subject to renewal 08/2017. DIVISION: 04 00 00 MASONRY
More informationEurooppalainen tekninen hyväksyntä ETA - 13/0613 European Technical Approval
VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu
More informationEuropean Technical Approval ETA-10/0124
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationEuropean technical approval ETA-12/0208
- Original version in German language Handelsbezeichnung Trade name termoz SV II ecotwist Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and use of construction
More information(English language translation, the original version is in French language) RAWL R-HPT
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEurooppalainen tekninen hyväksyntä ETA-10/0280 European Technical Approval
VTT EXPERT SERVICES OY PL 1001 02044 VTT Tel. + 358 20 722 111 www.vttexpertservices.fi Rakennusalan tuotteita koskevan jäsenvaltioiden lainsäädännön lähentämisestä 21 päivänä joulukuuta 1988 annetun neuvoston
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
VTT Expert Services Oy PL 1001 (Kemistintie 3) 02044 VTT Puh. + 358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti
More informationEuropean Technical Assessment ETA-16/0277 of 19/05/2016
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationErmächtigt u n d n o t i f i z i e r t gemäß Artikel 10 der Richtlinie des Rates vom 21. Dezember 1988 zur Angleichung
Zavod za gradbeništvo Slovenije Slovenian National Building and Civil Engineering Institute Dimičeva 12, 1000 Ljubljana, Slovenija Tel.: +386 (0)1-280 44 72, 280 45 37 Fax: +386 (0)1-436 74 49 e-mail:
More informationHSL-3 Heavy duty anchor carbon steel. Anchor Fastening Technology Manual HSL-3. Heavy duty anchor. Version 2015-09 09 / 2015 1
Anchor Fastening Technology Manual HSL-3 Heavy duty anchor HSL-3 Heavy duty anchor Version 2015-09 09 / 2015 1 HSL-3 Heavy duty anchor, Anchor version Sizes Benefits HSL-3 Bolt version Threaded rod version
More informationEuropean Technical Approval ETA- 13/0056
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationORION 40 DS lamp WALL version
Rev.1 Page 1 of 5 ORION 40 DS TECHNICAL DATA 180 1806 Performances at 80cm distance ORION 40 DS Light intensity at 80cm (Ec) 130klx (5000K) 60klx (with DENTAL CARE) Color temperature (K) 4500/5000 Color
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-2369 Reissued May 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationETA-07/0142. fischer drop-in anchor EA II. fischerwerke. No 305/2011.
Member of www.eota.eu TA Approval body for construction products and types of construction Bautechnisches Prüfamt An institution established by the Federal and Laertder Governments Designated according
More informationAuthorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the
ÖSTERREICHISCHES I N S T I T U T F Ü R B A U T E C H N I K A-1010 Vienna, Schenkenstrasse 4 Tel.: + 4 3 ( 0 ) 1-5 3 3 6 5 5 0 Fax: + 4 3 ( 0 ) 1-5 3 3 6 4 2 3 relating to construction products E - m a
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
VTT EXPERT SERVICES OY PL 1001 (Kemistintie 3) 02044 VTT Puh. + 358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti
More informationEuropean technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationConstruction Products Regulation
Construction Products Regulation (305/2011/EU) Engineers Ireland 27 th September 2013 Sarah Neary BE MBA CEng MIEI Senior Adviser Building Standards Environment, Community and Local Government What has
More informationEuropean Organisation for Technical Approvals Evropská organizace pro technické schvalování. TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p.
TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +420 286 019 458 Internet: www.tzus.cz Authorised and notified according to Article 10 of the Council Directive
More information(English language translation, the original version is in French language) SPIT HIT M. Société SPIT Route de Lyon F-26501 BOURG-LES-VALENCE France
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tel. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEuropeiskt Tekniskt Godkännande European Technical Approval
SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval ETA-11/0380 Handelsnamn
More informationThis European technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationfischer Test Report Fixing Tests for Wienerberger Porotherm blocks
fischer Test Report Fixing Tests for Wienerberger Porotherm blocks CONTENTS. Test Parameters... Substrates Tested Wienerberger Porotherm 90 &. Fixings Products Tested... Fischer Nylon UX Plug... Fischer
More informationEuropean Technical Approval ETA-09/0169
UK CARES Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, United Kingdom www.ukcares.com MEMBER OF EOTA European Technical Approval ETA-09/0169 Original version in English Trade name: Holder
More informationHUS-HR, CR Screw anchor, stainless steel
HUS-HR, CR Screw anchor, Anchor version HUS-HR 6 / 8 / 10 / 14 Stainless steel concrete Screw with hexagonal head HUS-CR 10 Stainless steel concrete screw with countersunk head Benefits - High productivity
More informationHUS-HR Stainless steel Concrete Screw A4 316. CE conformity. Corrosion resistance. European Technical Approval
HUS-HR screw anchor Anchor version Benefits HUS-HR Stainless steel Concrete Screw Quick and easy setting Low expansion forces in base materials Through fastening Removable Forged-on washer and hexagon
More informationINTERIM ADVICE NOTE 104/15 IAN 104/15 THE ANCHORAGE OF POST- INSTALLED FASTENERS AND REINFORCING BARS IN CONCRETE
INTERIM ADVICE NOTE 104/15 IAN 104/15 THE ANCHORAGE OF POST- INSTALLED FASTENERS AND REINFORCING BARS IN CONCRETE SUMMARY This Interim Advice Note provides guidance on design and specification for the
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
Page 1 of European Technical Approval ETA-09/0082 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston
More informationEurooppalainen tekninen hyväksyntä ETA-12/0045 European Technical Approval
VTT EXPERT SERVICES OY PL 1001 02044 VTT Tel. + 358 20 722 111 www.vttexpertservices.fi Rakennusalan tuotteita koskevan jäsenvaltioiden lainsäädännön lähentämisestä 21 päivänä joulukuuta 1988 annetun neuvoston
More informationEuropean technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationHUS-HR, CR Screw anchor, stainless steel
HUS-HR, CR Screw anchor stainless steel HUS-HR, CR Screw anchor, stainless steel Anchor version HUS-HR 6 / 8 / 10 / 14 Stainless steel concrete Screw with hexagonal head HUS-CR 10 Stainless steel concrete
More informationETAG 004 EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERING
European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique Edition March 2000 Amendment June 2008 GUIDELINE FOR
More informationFire Stopping and Sealing Product: Penetration Seals
UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. Phone : +44 1483 302130 Fax : +44 1483 302230 Email : Inform.NB@uk.ul.com Website
More informationStrengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning. May 7th 2013: Dominique Deschamps
Strengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning May 7th 2013: Dominique Deschamps Scope of the paper Presentation of the project Cause of cracks
More informationEUROPEAN ORGANISATION FOR TECHNICAL APPROVALS
E TA TECHNICAL REPORT Design of Bonded Anchors TR 29 Edition June 27 EUROPEAN ORGANISATION FOR TECHNICAL APPROVALS TABLE OF CONTENTS Design method for bonded anchors Introduction..4 1 Scope...2 1.1 Type
More informationETAG 016 SELF-SUPPORTING COMPOSITE LIGHTWEIGHT PANELS. (Part one : G E N E R A L)
European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique Edition NOVEMBER 2003 GUIDELINE FOR EUROPEAN TECHNICAL
More informationGeorgios Katsarakis Europäische Kommission
Georgios Katsarakis Europäische Kommission Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial
More informationHilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor
Hilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor Supplement to Hilti North American Product Technical Guide Volume 2: Anchor Fastening Technical Guide 2011 Edition 3.3. KWIK
More information(English language translation, the original version is in French language) Hilti HDA and HDA-R
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
Page 1 of European Technical Approval ETA-09/0081 VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston
More informationHUS-H Screw Anchor. Technical data. Seismic design data. HUS-H Carbon steel screw anchor. HUS-H diameter 8, 10, 14. Seismic design data
Technical data HUS-H Carbon steel screw anchor HUS-H diameter 8, 10, 14 10 / 011 Version 011-10 1 HUS-H screw anchor seismic design data Anchor version Carbon steel screw Benefits - Quick and easy setting
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
Page 1 of European Technical Approval ETA 08/0093 VTT VALTION TEKNILLINEN TUTKIMUSKESKUS PL 1000 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan
More informationRakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN
VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu
More informationEuropean Technical Approval ETA 13/0384
European Technical Approval ETA 13/0384 Trade Name Holder of the approval Website Generic type and use of construction product Isobriq EU, Isobriq LE, Isobriq PA & Isobriq ZE Isobriq sa 49 Rue Slar 4801
More informationHilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
More informationPART E SPECIFICATIONS
PART E SPECIFICATIONS Page 1 of 5 PART E - SPECIFICATIONS GENERAL E1. APPLICABLE SPECIFICATIONS, STANDARD DETAILS AND DRAWINGS E1.1 The City of Winnipeg Works and Operations Division Standard Construction
More informationAssessment Report Construction Product Regulation* * CPR - REGULATION (EU) No 305/2011
1. plan 1) Goal: Assessment and verification of the constancy of performance of the products as described by the manufacturer in his Declaration of Performance through: initial inspection of the manufacturing
More informationHigh-performance, 2-part epoxy anchoring adhesive
Product Data Sheet Edition 27/04/2009 Revision no: 0 Identification no: 01 04 02 06 001 0 000030-3+ -3+ High-performance, 2-part epoxy anchoring adhesive Construction Product Description Uses Solvent-free,
More informationHUS-V Screw anchor. HUS-V Screw anchor. Basic loading data (for a single anchor) Mean ultimate resistance
HUS-V Screw anchor Anchor version HUS-V 8 / 10 Carbon steel concrete screw with hexagonal head Benefits - High productivity less drilling and fewer operations than with conventional anchors - Technical
More informationÖsterreichisches Institut für Bautechnik Schenkenstrasse 4 1010 Vienna Austria T +43 1 533 65 50 F +43 1 533 64 23 mail@oib.or.at www.oib.or.
Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationDECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 08 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
More information