MLS 608 D. Digital Switching Simplified. Eight Input Switcher

Transcription

1 Switchers MS 608 D Eight Input Switcher with ProDSP Digital Switching Simplified Multi-input switcher for digital and analog video signals ProDSP audio signal processing Transmits HDMI and analog video, plus audio and RS-3 over CA cables Includes M/HDMI U R Twisted Pair Receiver HDCP compliant ED Minder automatically manages ED communication between connected devices

2 Features The MS 608 D is a simple-to-use, eight input, multi format switcher designed to integrate digital and analog sources. All signals are transmitted over CA cable to the included M/HDMI U R Twisted Pair Receiver. The MS 608 D features ProDSP digital audio processing, which provides an extensive array of easy-to-use tools for audio system set-up and fine-tuning. The MS 608 D offers digital video switching with four HDCP-compliant, HDMI inputs, and analog video switching with four universal inputs, including an Universal M Twisted Pair input. It outputs HDMI twisted pair signals and analog M Twisted Pair to the included M/HDMI U R receiver, providing a complete digital and analog video and audio switching system. The MS 608 D is ideal for classrooms and other AV environments that require an integration of a mix of digital and analog video sources. Three Switcher Models The MS 608 D is available in three models. The MS 608 D is a non-amplified model with a variable preamp output. The MS 608 D SA features stereo power amplification with 0 watts rms per channel into 4 or 8 ohms. The MS 608 D MA features mono 70 volt amplification with 40 watts rms output. The MS 608 D switchers are ideal for environments that require the flexibility to integrate digital and analog video switching in a single switcher. Both amplified models feature an exclusive, highly efficient, advanced Class D amplifier design with patented CDRS - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. Extensive Control Options The switcher can be controlled using the front panel backlit buttons or RS-3. The front panel provides control for direct input switching as well as mic and audio volume. These backlit buttons can be individually labeled to enable easy identification of video and audio inputs. In addition, the switchers can be controlled via RS-3 using an optional Touchink Touchpanel Control System or Mediaink Controller. Touchink and Mediaink are configurable control systems that provide a simple and intuitive user interface for the MS 608 D switchers, and the entire room. M Twisted Pair System Optimization The MS 608 D offers features designed to streamline installation and set-up of M Twisted Pair systems, including video level and peaking compensation for the M input of the switcher as well as the M/HDMI U R Twisted Pair Receiver. Skew compensation is provided by the MS 608 D for both the M input and output, maintaining RGB color alignment. Additionally, with automatic signal format detection, the M/HDMI U R receiver automatically detects the incoming video signal format, as well as any incoming audio or RS-3 control signal from the MS 608 D. The incoming signals are then routed to the appropriate output connectors. The HDMI and RS-3 signals are carried on the digital output over the dual twisted pair cables. Audio signals from the MS 608 D are transmitted to the M/HDMI U R over the M cable. Accepts Multiple Digital and Analog Signal Formats The MS 608 D features independent digital and analog video switching. The digital portion comprises four HDCP compliant HDMI Inputs. Each HDMI input features automatic cable equalization, which reduces the need for additional signal conditioning equipment by compensating for signal loss when using long input cable assemblies. The MS 608 D de-embeds two-channel PCM audio signals from the HDMI input, allowing for audio DSP processing and signal routing to the outputs. The analog portion includes three universal inputs that accept all common video formats, from high resolution RGB to HDTV and composite video. A fourth, Universal M Twisted Pair input accepts all of these signals from an M Series Twisted Pair Transmitter.

3 Features ED Minder The MS 608 D features ED Minder, which automatically manages the ED information between the display device and all the HDMI and VGA input sources. ED Minder offers an automatic mode which captures and stores the ED from the display, and then communicates this ED to the input sources. Also available is a user assigned mode, which allows pre-stored ED, based on a user selected resolution, to be manually assigned to the sources. By maintaining continuous ED communication with all sources, ED Minder ensures that all HDMI and VGA sources power up properly and maintain video output whether or not they are actively connected to the display device through the switcher s outputs. Digital and Analog Twisted Pair Outputs The MS 608 D includes a dual twisted pair output for HDMI signals, and a single Universal M Twisted Pair output for analog signals. These outputs enable transmission over economical and installationfriendly CA cables to the included M/HDMI U R receiver, which can be conveniently mounted at the display. RS-3 Insertion Port The local RS-3 insertion port allows direct transmission of bidirectional control signals into the twisted pair output. This eliminates the need for a separate control cable infrastructure to the remote display, simplifying installation and reducing cost. Audio Switching and Integrated ProDSP The MS 608 D features seven-input stereo audio switching to accompany incoming video sources. A mic/line audio matrix mixer allows either of two available mic/line inputs to be mixed into any or all of the audio switcher outputs. Input gain and attenuation is provided for each input, and the MS 608 D provides master volume control on the front panel as well as a separate control for mic volume. The MS 608 D also incorporates ProDSP, an -developed audio platform based on a powerful 3/64-bit floating point DSP engine, with easy-to-use tools to control level, dynamics, filters, delay, ducking, loudness, and feedback suppression. ProDSP is managed by the intuitive DSP Configurator Software, which features a Graphical User Environment that offers a clear view of all input and outputs, audio processing blocks, audio switcher settings, and microphone mix points in a single window. Extensive Control Options Touchink Control System Mediaink Controllers 70MV 7" Wall mount Touchpanel 000TV 0" Tabletop Touchpanel MC 04 IP Plus Mediaink Controller with IP ink 70CV Cable Cubby Touchpanel IPCP 505 IP ink Control Processor MC 6 IP Enhanced Mediaink Controller with IP ink

4 Overview - MS 608 D Here is my native resolution and vertical refresh rate. OK, sending video to fit your format. ED Minder Video ED Minder Video ED Minder Video ED Minder Video Output Input Input Input ED ED Minder automatically manages ED communications between the display and video sources, ensuring that all sources power up correctly and reliably output content to the display. Accepts and switches multiple digital and analog video signal formats Four input HDMI switching Four input analog universal video switching Four universal inputs, including an Universal M Twisted Pair, accept RGBHV, HDTV component video, and S-video or composite video sources. Transmits HDMI and analog video over CA cables to included M/HDMI U R Twisted Pair Receiver The MS 608 D includes twisted pair outputs for transmitting HDMI and analog video signals, plus audio and RS-3 to the included M/HDMI U R. The receiver then automatically routes incoming signals to the appropriate output connectors. ED Minder Automatically manages ED Extended Display Identification Data communication between the display and connected HDMI and VGA input sources. ED Minder ensures that all sources power up correctly and reliably output content, whether or not they are actively connected to the display device through the switcher s outputs. Sends HDMI signals 00 feet (60 meters) over twisted pair cable The MS 608 D sends 70p, 080i, and XGA (04x768) HDMI signals over 00 feet (60 meters), and 080p/60 and 90x00 HDMI signals over 00 feet (30 meters) with standard CAT 5e cable. S0 Digital Twisted Pair Cable provides added protection from outside interference and increases overall signal transmission distance, allowing 080p/60 and 90x00 signals to be sent 50% further than with standard CAT 5e cable. Extensive Control Options The switcher can be controlled using the front panel backlit buttons or RS-3. An optional Touchink Touchpanel Control System or Mediaink Controller may be connected to the RS-3 port to provide a simple and intuitive user interface for the MS 608 D switchers, and the entire room. HDCP compliant The MS 608 D switchers and included M/HDMI U R fully support switching and long distance transmission of HDCP signals. HDCP Visual Confirmation The MS 608 D provides a green signal when encrypted content is sent to a noncompliant display. A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-hdcp compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display. Cable equalization for each HDMI input Actively conditions incoming HDMI signals to compensate for signal loss when using long HDMI cables, low quality HDMI cables, or source devices with poor HDMI signal output. Skew equalization for M input and output Skew adjustments are stored in memory for both the M input and output, maintaining RGB color alignment at all times. Separate variable level and peaking controls on MS 608 D M input and M/HDMI U R receiver Front Panel Control with backlit buttons The buttons can be custom-labeled for easy identification. Because the buttons illuminate, they are helpful for presenters in low-light environments. HDMI audio de-embedding Strips two-channel PCM audio off HDMI inputs, allowing for DSP and signal routing. Four Input HDMI Switching

5 Overview - Mtp/HDMI U R Twisted Pair Receiver The intuitive DSP Configurator Software features a Graphical User Environment that offers a clear view of all input and outputs, audio processing blocks, audio switcher settings, and microphone mix points in a single window. Audio switching and output volume control The MS 608 D features PCM audio switching for seven stereo balanced or unbalanced input sources, and provides master volume control and muting. Three balanced or unbalanced outputs are available, two on the MS 608 D, and a third on the M/HDMI U R. Each output can be set as variable or fixed. Audio input gain and attenuation Gain or attenuation can be adjusted for each input to eliminate noticeable differences when switching between sources. Mic/line audio matrix mixing The MS 608 D provides microphone bussing so that each of the two mic/line inputs can be mixed into any or all of the audio outputs. Available power amplification The MS 608 D SA includes a stereo power amplifier with 0 watts rms per channel into 4 or 8 ohms. The MS 608 D MA offers a mono 70 volt amplifier with 40 watts rms output. Both models feature an exclusive, highly efficient, advanced Class D amplifier design with CDRS - Class D Ripple Suppression, an patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones. ProDSP audio signal processing The MS 608 D features a powerful 3/64-bit floating point audio DSP processing engine, which provides very wide dynamic range and maintains audio signal transparency while preventing DSP signal clipping and simplifying management of gain staging. Essential audio DSP tools ProDSP provides an extensive array of easy-to-use, digital audio processing tools for audio system setup and finetuning, including audio gain, dynamics, compression, filtering, delay, microphone ducking, loudness, and feedback suppression. DSP Configurator Software A powerful yet user-friendly software tool for managing all audio setup and operations of the MS 608 D. It enables complete setup and configuration of digital audio processing tools on the ProDSP platform as well as microphone mixing. USB configuration port Provides convenient access to the MS 608 D for system setup and configuration, as well as ProDSP for audio system integration. M/HDMI U R receiver plenum rated The M/HDMI U R receiver meets U 043 for heat and smoke release, excluding the power supply. Power Save Mode The MS 608 D can be placed in standby to conserve energy when not in use. When power save mode is enabled, the switcher draws less than four watts of power, reducing cost. The power indicator ED turns amber to indicate that the switcher is in the power-save standby state.

6 Overview USB configuration port Provides convenient access to the MS 608 D for system setup and configuration. Backlit input selection buttons Input selection buttons are easily identifiable using backlit buttons with overlay labels, enabling simple front panel operation. Volume controls Allow for adjustment of master volume and microphone level, with accompanying EDs to indicate volume level. MS 608 D - Front Analog universal video inputs Includes three video inputs that accept all common formats, from composite video to HDTV and RGBHV. Digital and analog twisted pair outputs The MS 608 D outputs HDMI twisted pair and analog Universal M Twisted Pair signals to the included M/HDMI U R receiver. Mic/line inputs and matrix mixer Inputs for microphones can be selectively mixed into any or all of the available audio outputs. Audio amplifier output MS 608 D models are available with stereo or mono amplified audio output. RS-3 insertion Eliminates the need for separate control cable infrastructure to the display. MS 608 D SA - Back Universal M Twisted Pair Input M input accepts all common video formats along with audio on a single CA cable. Four HDCP compliant HDMI inputs Audio switching Seven stereo inputs accept balanced and unbalanced signals. ProDSP Provides full control of audio input and output levels plus a wide array of audio processing tools for program and microphone signals. Configurable audio outputs Three audio outputs, including one output on the M/HDMI U R, can be set as balanced or unbalanced, as well as stereo or dual mono. RS-3 control port Can connect to a Mediaink Controller or IP ink Control Processor for separate room and display control.

7 Separate variable level and peaking controls Front panel ED indicators Provide convenient indication of source signal presence as well as power. Automatic video signal routing Provide active compensation to optimize image quality with various cable lengths. For the M input, the M/HDMI U R automatically detects and then routes the incoming signals to the appropriate analog output connectors. Bi-directional RS-3 output Passes RS-3 control signals from the MS 608 D to the display. HDMI twisted pair input Accepts signals from the HDMI twisted pair output of the MS 608 D. M/HDMI U R Universal M Twisted Pair input Balanced/unbalanced dual mono audio output Accepts signals from the M Twisted Pair output of the MS 608 D. Mono audio signals are sent with the M Twisted Pair transmission. Application diagram MC 6 IP DV+ Microphones M T 5HD A D CH Transmitter O Enhanced Mediaink Controller w/ IP ink 003 AU CH R 003 TE M TCP/IP Network CO Projector Control NT R CO RO DVD VCR TUN ER NU P STO ME ER SE ENT WD E X AU EO VID DV TO AU GE IMA A SP R VC 4 D PC OP PT A 8D ME U IR VO RT N/A N/A SE MC 6 IP + DV Ethernet GlobalViewer A/V Resource Management and Remote Control Application SA 60-3 RS PA V/R PRE IG NF CO aptop MS EW NEX C DO M CA F OF ON PAU T/F TIT Switcher Control Ethernet & VC D DV Rx V + 0W S O OU 4/8 x M- V R E C/ TS O R MI AU R Rx -3 RS ST HO OH AU R T= W 7. R OU PW Screen Control 8 R R 7 R 6 R OU TA GI 5 R TS TA GI 6-3 EO + RS VID 8 5 OG A AN OU M + O OG + T V OU A E AN AB UR IG NF MS 608 D SA Switcher CO ED ER FF OU ) SI 6 Digital Video + RS-3 7 AU TS Surface Mount Speakers T= R OU PWW 4 (M BU /60 V 3 Hz RS E AR SP M + Audio Rx NO O AU MO VID X A MA 3. B- S OU C / B RG R- OU OG A AN M/HDMI U R Receiver TA GI T -3 RU RS TH SS PA T MI HD TA GI Rx M Projector Control R WE PO X V A MA 0.8 HDMI + Audio HDMI + Audio PC Document Camera Blu-ray aptop Projector

8 Specifications Video MS digital inputs Maximum data rate 6.75 Gbps (.5 Gbps per color) Maximum pixel clock 5 MHz Standards DVI.0, HDMI.3 compatible Video input and loop-through MS Analog Digital video Resolution range Audio input MS 3 RGBHV, RGBS, component video, S-video, or composite video input RGBHV, RGBS loop-through analog proprietary signal from an M transmitter 4 HDMI (or DVI*) digital video Up to 90x00 or 60 Hz 7 stereo, line level, balanced/unbalanced (inputs -3, 5-8 analog) mono, line level, balanced/unbalanced (mic/line level inputs) proprietary analog signal (mono, from M input 4) 4 stereo, de-embedded from HDMI (-channel, PCM only, from HDMI inputs 5-8) Audio output line level (all models) MS stereo or dual mono, balanced/unbalanced (fixed or variable, selectable) dual mono, balanced/unbalanced (fixed or variable, selectable), via M Audio output Power amplifier (amplifier models only) MS MA model mono, 70 V line SA model stereo (default) or mono, channels total oad impedance MA model 3 ohms minimum SA model 4 or 8 ohms Amplifier type Class D Output power MA model 40 watts (rms), 70 V, khz, % THD SA model 0 watts (rms) per channel, 4 or 8 ohms, khz, % THD Control/remote switcher MS Serial control port bidirectional RS-3: rear panel 3.5 mm captive screw connector, 5 pole (uses 3 poles) USB control ports front panel female mini USB B General MS Power supply Internal Input: VAC, Hz Auxiliary power output Port watts, VDC, on a pole connector Port 7. watts, VDC, on a 5 pole connector shared with the serial control port Enclosure dimensions 3.5 H x 7.5 W x.0 D (U high, full rack wide) (8.9 cm H x 44.4 cm W x 30.5 cm D) (Depth excludes connectors, knob, and buttons. Width excludes rack ears.) Video M/HDMI U R M input Maximum resolution Analog Up to 048x080 or 080p at 60 Hz HDMI digital input Maximum data rate 4.95 Gbps (.65 Gbps per color) Maximum resolution Digital Up to 90x00 or 080p at 60 Hz Video output M/HDMI U R Analog output RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) HDMI digital output single link HDMI (or DVI-D*) Control/remote External device (pass-through, unidirectional or bidirectional) from M input M/HDMI U R NOTE: This port is not used when the M/HDMI U R is used with an MS 608 D Series switcher. Serial control port input/output RS-3 via () 3.5 mm, 5 pole captive screw connector (3 poles are used) General M/HDMI U R Recommended cable type Shielded (recommended) or unshielded M input CAT 5/5e/6 HDMI digital input CAT 5/5e/6, S0 NOTE: Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. strongly recommends using shielded twisted pair for optimal performance. Power supply External Input: VAC, Hz Output: VDC, A, watts Enclosure dimensions.7 H x 8.75 W x 3.0 D (half rack wide) (4.3 cm H x. cm W x 7.6 cm D) (Depth excludes connectors.) Model Version Description Part number MS 608 D Variable Preamp Output - No Amplifier MS 608 D MA 40 Watt 70 Volt Mono Power Amplifier MS 608 D SA x0 Watt Stereo Power Amplifier For complete specifications, please go to Specifications are subject to change without notice. Worldwide Sales Offices Anaheim Raleigh Silicon Valley Dallas Chicago New ork Washington, DC Toronto Mexico City Paris ondon Frankfurt Amersfoort Moscow Dubai Johannesburg New Delhi Bangalore Singapore Seoul Shanghai Beijing Tokyo UNITED STATES EUROPE ASIA MIDDE EAST Inside USA/Canada Inside Europe Inside Asia Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice REV. C etter - English - NP