3D Cool Climate Control

Transcription

1 3D Cool Climate Control HOME APPLIANCES HOME APPLIANCES Registered trademark/tm Trademark of Whirlpool, U.S.A Whirlpool of India Ltd. All rights reserved. Due to advancement of technology and constant R&D the specifications, models and designs are subject to change without prior notice

2 Vipul Sabharwal Vice President - (Sales & Marketing)

3 -R22 a

4 Under Preparation before use Before using the air conditioner, be sure to check and preset as the following. Remote Controller (RC) Auto-Restart Function Auto Turbo Mode Turbo mode is used to start or stop fast cooling. 6 In case of power resume, auto turbo mode work for 10 min. powered on 6

5 Safety precautions bend may be away around any requirements 2

6 3

7 Timer Turbo Temperature On Sleep 4

8 Remote controller Remote controller The remote controller transmits signals to the system. 1 ON/OFF BUTTON The appliance will be switched on or Off on pressing this button 2 MODE BUTTON Press this button to select the operation mode. 3 FAN BUTTON Used to select fan speed in sequence auto, high, medium or low ROOM TEMPERATURE SETTING BUTTONS Used to adjust the room temperature and the timer, also real time. 6 SENSE BUTTON Used to enter fuzzy logic operation directly, regardless of the unit is on or off. 7 SWING UP/DOWN Used to stop or start vertical adjustment louver swinging and set the desired up/down airflow direction. 8 SILENT SLEEP Used to set or cancel Sleep Mode operation. 9 AROUND U BUTTON Used to set or cancel AROUND U Mode operation. 10 POWER SAVER BUTTON Used to enter or quit POWER SAVER mode 11 TIMER OFF BUTTON 13 Used to cancel the timer operation. SUMMER CHILL Used to start or stop the fast cooling. 15 SWING L/R TIMER ON/CLOCK BUTTON Used to set timer operation and clock. Used to stop or start Horizontal adjustment louver swinging and set the desired left/right airflow direction. 16 SPRING COOL Note: Each mode and relevant function will be further specified in following pages. 14 DIM BUTTON When you press this button, all the display of indoor unit will be switched off. Press any button to resume display. SPRING COOL is suitable for non-peak summer when the indoor room temperature is neither too hot nor too humid. 17 MONSOON FRESH MONSOON FRESH is suitable for high humid condition, when the moisture content in the air inside the room creates major discomfort. *"Swing L/R" button in the remote control shall not function for 1.0 T 3D Cool Climate Control. For horizontal air flow, adjust manually. ON OFF 5

9 Remote controller Remote controller Indication symbols on LCD: Cooling indicator Auto fan speed 6th sense indicator Signal transmit Dry indicator Fan only indicator High fan speed Medium fan speed Sleep indicator Around U ON OFF Display set timer Display current time Heating indicator Low fan speed Turbo indicator Display set temperature Power saver indicator Climate Control Super silense Note: Each mode and relevant function will be further specified in following pages. How to Insert the Batteries Note: Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of becomes dim. 6

10 ON OFF 16~

11 Operation instructions Airflow direction control Airflow direction control ON OFF Vertical & Horizontal airflow is automatically adjusted to a certain angle in accordance with the operation mode after turning on the unit. Operation mode Direction of airflow COOLING, DRY Vertical & Horizontal *Heating mode is only available for heat pump models. The direction of airflow can be also adjusted to your own requirement by pressing the "Swing - Up/Down & L/R" button of the remote controller Vertical airflow control (with the remote controller) Using remote controller to set various angles of flow or specific angle as you like. Swinging airflow Pressing Swing - Up/Down button once, Horizontal louver will swing up and down automatically. 6 Desired direction airflow Pressing the Swing - Up/Down button again when the louvers swing to a suitable angle as desired.default position is applicable after power resume. Using remote controller to set various angles of flow or specific angle as you like. Swinging airflow Pressing Swing L/R button once, Vertical louver will swing up and down automatically. Desired direction airflow Horizontal airflow control (with the remote controller) Pressing the Swing L/R button again when the louvers swing to a suitable angle as desired.default position is applicable after power resume. 7 Swing L/R" button in the remote control shall not function for 1.0 T 3D Cool Climate Control. For horizontal air flow, adjust manually Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit first and cut off the power supply, then restore power supply again. It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent condensed water from dripping. 8

12 ON OFF Room temperature decrease by 1.5 after operate for 3 minutes Note: Temperature, airflow and direction are controlled automatically in 6th sense mode. However, For the on/off, you can choose from -2 to 2, for the inverter you can choose from -7 to 7. if you still feel uncomfortable. Around U button 9

13 Operating Instructions Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the TIMER ON mode automatically. A "beep" can be heard. "ON" stops flashing. The TIMER indicator on the indoor unit lights up. Note: the TIMER ON mode has been canceled. 10

14 Climate Control Feature Usage: SUMMER CHILL is best suited for peak summer conditions. SUMMER CHILL operation sets the Air Conditioner automatically at lowest set temperature that resultsin fastest temperature pull down. The indoor room temperature starts reducing immediately as the machine operates at the highest fan speed. Operation: Enable: To engage this function press the SUMMER CHILL button on the remote. You can only change the air flow direction and the timer settings in this mode. Disable: To disengage press SUMMER CHILL, the display will automatically return to the original settings. Note: *The Air Conditioner will continue working in Summer Chill mode, if you do not disable the mode using the above step. ** Under SUMMER CHILL mode preset parameters cannot be change. Usage: MONSOON FRESH is suitable for high humid condition, when the moisture content in the air inside the room creates major discomfort. MONSOON FRESH operation sets the Air Conditioner automatically at preset suitable set temperature and fan speed that helps to remove the excess moisture content from the indoor atmosphere at a faster rate, to bring in quick comfort inside the room. Operation: Enable: To engage this function press the MONSOON FRESH button on the remote. You can only change the air flow direction and the timer settings in this mode. Disable: To disengage press MONSOON FRESH, the display will automatically return to the original settings. Note: *The Air Conditioner will continue working in MONSOON FRESH mode, if you do not disable the mode using the above step. ** Under MONSOON FRESH mode preset parameters cannot be change. Usage: SPRING COOL is suitable for non-peak summer when the indoor room temperature is neither too hot nor too humid. SPRING COOL operation sets the Air Conditioner automatically at preset suitable set temperature and fan speed that provides immediate mild cooling for best comfort. Operation: Enable: To engage this function press the SPRING COOL button on the remote. You can only change the air flow direction and the timer settings in this mode. Disable: To disengage press SPRING COOL, the display will automatically return to the original settings. Note: *The Air Conditioner will continue working in SPRING COOL mode, if you do not disable the mode using the above step. ** Under SPRING COOL mode preset parameters cannot be change ON OFF

15 Climate Control Feature 4 Usage: SILENT SLEEP can be operated in COOLING or DRYING mode operation. SILENT SLEEP operation provides a comfortable indoor room condition with lowest noise for comfortable sleep. Operation: Enable: To engage this function press the SILENT SLEEP button on the remote. Fan speed automatically sets at a low speed. Set temperature will rise by 1 degree C, If the Air Conditioner operates continuously in cooling mode for 1 hours constantly, then remains steady. The Air Conditioner will stop operation automatically after 8 hours of running. Disable: To disengage press SILENT SLEEP The Air Conditioner will stop operation automatically after 8 hours of running. Note: In cooling mode, if room temperature is 26 degree C or above, set temperature will not change. Functions available in different modes Temp. Control Fan Speed Timer Silent Sleep Swing Cool Mode Dry Mode Fan Mode th 6 Sense Summer Chill Power Saver Monsoon Fresh Spring Cool x x x x x x x x x x x x x x x 12

16 Maintenance Clean the air filter every two weeks if the air conditioner operates in an extremely dusty environment. 13

17 16 14

18 Troubleshooting The following cases may not always be a malfunction, please check it before asking for service. s? froming? Are the? s? n 15

19 Troubleshooting chart 16

20 17

21 same as per provided connecting pipe 18

22 Installation instructions Below declared Connecting pipe length to be referred as standard length for Model Sold without Connecting Pipe. Model Pipe length 1.0T 4 Meter 1.5T 3.2Meter 2.0T 4 Meter 1. Installing the Mounting Plate Note: The shape of your mounting plate may be different from the one above, but installation method is similar. 2. Drill a Hole for Piping 3. Indoor Unit Piping Installation Note: When installing the pipe at the directions 1,2 or 4, saw the corresponding unloading piece off the indoor unit base. 19

23 Installation instructions Piping Joints Thermal Insulation: Piping Thermal Insulation: Note: Drain hose is prepared by user. Piping Connection: Model 1.0TR-2*, 3*&5* 1.5TR-2*, 3*&5* 2.0TR-4* 1.0TR-2*, 3*&5* 1.5TR-2*, 3*&5* 2.0TR-4* Pipe size Liquid Side (1/4 ) Liquid Side (1/4 ) Liquid Side (3/8 ) Gas Side (1/2 ) Gas Side (1/2 ) Gas Side (5/8 ) Torque Nut width Min.thickness 1.8kg m 17mm 0.6mm 1.8kg m 3.5kg m 5.5kg m 5.5kg m 17mm 22mm 24mm 24mm 0.6mm 0.6mm 0.6mm 0.6mm 7.5kg m 27mm 0.6mm 20

24 Installation instructions 4. Connecting of the Cable Indoor Unit Note: For some models, it is necessary to remove the cabinet to connect to indoor unit terminal. Outdoor Unit Indoor unit Outdoor unit 4) The figures in this manual are based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner you have selected. Caution: 1. Never fail to have an individual power circuit specifically for the air conditioner. As for the method of wiring, refer to the circuit diagram posted on the inside of the access door. 2.Comfirm that the cable thickness is as specified in the power source specification. 3.Check the wires and make sure that they are all tightly fastened after cable connection. 4. Be sure to install an earth leakage circuit breaker in wet or moist area. Cable Specifications Capacity (Btu/h) Type Power Cord Normal cross-sectional area Power connecting cord Type Normal cross-sectional area Main power supply(note) H05RN-F 21

25 22

26 23

27 24

28 Warranty term A RELATIONSHIP FOR LIFE WITH 5 YEARS WARRANTY Whirlpool Air Conditioner 25

29 Warranty term 26

30 Warranty term 15. "Whirlpool Products without barcode label affixed on the product will not be covered under warranty." 27

31 28

32 29

33 Installation commissioning 30

34 31

35 Installation commissioning 32

36 33

37 Declaration on Hazardous Substances : EWaste Rules Some components used in manufacturing this Air Conditioner contain low content of some substances classified as hazardous, according to EWaste Rules published by the Government of India. These do not pose any risk to the conditioning of air inside the room. Nor does physical contact with the Air Conditioner during the life of the product endanger health or safety to humans or any living creature. However, if the Air Conditioner is not disposed safely at the end of its life, inappropriate handling of waste may pose risks to health and environment. Hence, it is our advice that you contact Whirlpool when you are ready to discard the product so that we can channelize the appliance and its components for safe disposal.