Taylor. 3-in-1 Convertible Crib. Adaptable as Your Child Grows Up

Transcription

1 Taylor 3-in-1 Convertible Crib Adaptable as Your Child Grows Up Adult assembly required due to the presence of small parts, sharp points & sharp edges. Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference. Our goal is to improve the assembly process for the customer. If you have any questions during assembly or you are missing parts Do not return product parts to the retailer before contacting our customer service department for assistance. Please follow contact instructions on page 9. Assembly Instruction Manual Questions? Call Us at Website:

2 Crib Warnings Failure to follow these warnings and the assembly instructions could result in serious injury or death. Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE. DO NOT use this crib if the instructions can not be strictly followed. Infants can suffocate on soft bedding. Never add a pillow or comforter. To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician. Strangulation Hazard: Strings can cause strangulation! DO NOT place items with a string around a child s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys. To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners. DO NOT place crib near window where cords from blinds or drapes may strangle a child. Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out. Stop using crib when child begins to climb out or reaches the height of 35 in. (89cm). The crib can be converted to a toddler bed for extended use. Check this product for damaged hardware, loose joints, loose bolts, and other fasteners, missing parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact LOLLY & ME at or write to Bren Road West, # Minnetonka, MN for replacement parts and instructional literature if needed. DO NOT substitute parts. DO NOT use a water mattress with this crib. If refinishing, use a non-toxic finish specified for children s products. Never use plastic shipping bags or other plastic film as mattress covers as they can cause suffocation. Infants can suffocate in gaps between crib sides and a mattress that is too small. Assemble on soft surface to prevent damage to the product finish. To make it easier to bulid your crib have a friend help during the assembly. Ensure that all parts and components are located before beginning assembly. Any mattress used in this crib must be at least 27 1/4 inches (69cm) by 51 5/8 inches (131cm) with a thickness not exceeding 6 inches (15cm). 2

3 Toddler Bed Warnings Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child. The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 51 5/8 in. (1310mm) in length, 27 1/4in. (690 mm) in width and 4 in. (100 mm) in thickness. Not exceeding 6 in. (15cm) in thickness. If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid the formation of a gap between the mattress and the bed that could cause an entrapment. The minimum age for a child using this toddler bed shall not be less than 15 months and the maximum weight shall not be greater than 50 lb (22.7 kg). Do not use casters on the toddler bed. Do not use a water mattress. A child could suffocate in small spaces between the toddler bed and solid objects such as a wall or a dresser. Strangulation Hazard: Do not place bed near windows where cords from blinds or drapes may strangle a child. Do not place items with a string, cord, or ribbon around a child s neck, such as hood strings or pacifier cords. Do not suspend strings over a toddler bed for any reason. 3

4 Congratulations on Your Purchase! Thank you for choosing a Lolly & Me product. Don t worry about the assembly. Inside you will find understandable stepby-step instructions with clear illustrations it ll be a piece of cake! If you get stuck, ring us up at Need a replacement part or is a part missing? Just call us and we ll get one sent off to you right away. Remember to complete your product registration card and mail it in to activate your product s one year limited warranty. You can also go online to and complete it there. Then and this is the good part you will be registered in our monthly drawing for a gift to enhance your little ones nursery! Sincerely, Lolly & Me Questions? Call Us at Website: customerservice@lollyandme.com 4

5 Instructions for Assembly Taylor 3-in-1 Convertible Crib Adaptable as Your Child Grows Up OK Let s Put This Baby Together! Adult assembly required due to the presence of small parts, sharp points,and sharp edges. Before assembly, read these instructions. Make sure all preassembled parts are tight and that all neccessary hardware is included. Store the instruction manual for future reference. Our goal is to improve the assembly process for you, our customer. If you have any questions during assembly or you are missing parts, please contact us directly. Do not contact the retailer. Do not return product parts to the retailer before contacting our customer service department for assistance. We are here for you. 5

6 Parts A Left & Right End (x2) B Crib Side (x2) C Toddler Bottom Rail (x1) D Toddler Rail (x1) E Mattress Base (x1) 6

7 Hardware M6x92mm Bolt (x12) bb M6x16mm Bolt (x4) cc M6x44mm Bolt (x3) dd Dowel (x2) L Allen Wrench S Allen Wrench 7

8 STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW THE PROCEDURES LISTED ON THE FOLLOWING PAGE 8

9 PRODUCT ASSITANCE PROCEDURES IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASE CONTACT US DIRECTLY. PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS: FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA phone us at or write to Bren Road West, # Minnetonka, MN PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR YOUR NAME 2. ADDRESS 3. BEST DAY TIME PHONE NUMBER 4. PLACE AT DATE OF PURCHASE 5. MODEL NUMBER, NAME AND COLOR OF YOUR PRODUCT 6. MANUFACTURER S CODE (THE MANUFACTURER S CODE CAN BE FOUND ON A LABEL AFIXED TO THE BOX AS WELL AS A LABEL AFIXED TO THE CRIB ITSELF.) 7. SHORT DESCRIPTION OF THE ISSUES AND ATTACH PHOTOS IF POSSIBLE. PLEASE INCLUDE SPECIFIC PART NUMBERS IN QUESTION FOR MORE EFFICIENT SERVICE. SOMEONE WILL CONTACT YOU VIA OR PHONE TO HELP YOU WITH YOUR ISSUES. IF YOU DO NOT HAVE INTERNET ACCESS, PLEASE FAX THE ABOVE INFORMATION TO : IF YOU DO NOT HAVE INTERNET OR FAX ACCESS, PLEASE CAL US AT AND BE SURE TO HAVE ALL THE ABOVE INFORMATION TO GIVE TO THE CUSTOMER SERVICE REPRESENTATIVE. WE ARE HERE FOR YOU! 9

10 Parts Needed: "L" Allen Wrench Left & Right End (x2) Crib Side (x1) OR "S" Allen Wrench A B M6x92mm Bolt (x6) 1 Crib Assembly A B A Attach 2pcs Left & Right End (A) to Crib Side (B) using 6pcs Bolts (). Continue to Step

11 Parts Needed: E Mattress Base (x1) 2 Crib Assembly E Figure 1 Warning Envelope Rotate out four mattress brackets (one on each end) on (1) Mattress Base (E) as shown (see Figure 1) before attaching to Crib Assembly. Then attach Instruction Envelope (see Figure 2). Figure 2 Continue to Step

12 Parts Needed: "L" Allen Wrench Mattress Base (x1) OR "S" Allen Wrench E bb M6x16mm Bolt (x4) 3 Crib Assembly bb x4 on this bolt assembly zoom E Attach Mattress Base (E) to Crib using 4pcs Bolts (bb). Continue to Step

13 Parts Needed: "L" Allen Wrench Crib Side (x1) OR "S" Allen Wrench B M6x92mm Bolt (x6) 4 Crib Assembly EB Attach Crib Side (B) to Right and Left Crib End using 6pcs Bolts (). Continue to Step

14 5 Crib Assembly Please note that there are 3 different heights to adjust the mattress support as your baby grows. Place newborns and non-sitting babies on mattresses positioned on the highest mattress support position. (top hole) Once a baby is sitting up, adjust the mattress to the second position so that the baby is lower than the crib railing. (middle hole) When the baby can pull up to the railing, move the mattress to the lowest mattress support position. (Bottom hole). Your mattress must be at the lowest level before the child begins to stand up. To change the position of the mattress base, unscrew bolts, line up the base with the holes at the desired height and re-attach the mattress base using the same bolts. Your Lolly & Me crib is now built. Be sure to gently retighten all bolts to square up the sides and you are good to go. Well done! Continue to Step

15 Parts Needed: "L" Allen Wrench OR "S" Allen Wrench 6 Toddler Bed Assembly EB Remove 6pcs Bolts () and the Front Side (B) from Crib Assembly as shown. Continue to Step

16 Parts Needed: "L" Allen Wrench Toddler Bottom Rail (x1) Toddler Rail (x1) OR "S" Allen Wrench C D cc M6x44mm Bolt (x2) 7 Toddler Bed Assembly cc D cc C Attach Toddler Rail (D) to Toddler Bottom Rail (C) using 2pcs Bolts (cc). Continue to Step

17 Parts Needed: "L" Allen Wrench cc M6x44mm Bolt (x1) dd Dowel (x2) OR "S" Allen Wrench Toddler Rail (x1) M6x92mm Bolt (x2) 8 Toddler Bed Assembly cc dd dd Attach Toddler Rail to Crib using 2pcs Bolts () and 1pcs Bolt (cc) and 2pcs Dowels (dd). The Lolly&Me toddler rail allows our customer greater flexibilty in usage as rail can be attached at the head of the bed or at the foot. Flip it left to right depending on individual preference. Continue to Step

18 Parts Needed: "L" Allen Wrench OR "S" Allen Wrench 9 Day Bed Assembly cc cc D cc Remove 3pcs Bolts (cc) and the Toddler Rail (D) from Crib Assembly as shown. Continue to Step

19 10 Day Bed Continue to Step

20 Parts Needed: 11 Storing Instruction Manual Fold Line 3. After unit is assembled, use the following instructions to keep instruction manual for future use. 1. Pick up instruction manual. 2. Fold instruction manual in half. 3. Slide instruction manual into warning envelope attached to mattress base assembly. 20

21 base and 21

22