SebArt professional line SharkS 30E ARF

Size: px
Start display at page:

Download "SebArt professional line SharkS 30E ARF"

Transcription

1 SebArt professional line SharkS 30E ARF ASSEMBLY MANUAL The Total Trainer SharkS 30E ARF, was designed by Italian Champion Sebastiano Silvestri. With this design SebArt reinvented the idea of the Trainer. This professional ARF kit is the result of more than 25 years in model airplane design experience. This innovative design combined with the extremely lightweight structure, all wood airframe, give the SharkS 30E an impressive precision and smoothness at any airspeed and flight condition. It is unbelievable how the SharkS 30E can do it all! It can fly very stable and easy at any airspeed: a dream for every beginner. In expert hands it can perform very easy reverse flight, hover, positive harrier, low speed knife edge, and almost anything else you can dream up are waiting you, and that for a Trainer is revolutionary!...your SharkS is waiting you! Specifications Wing Span: cm (61,8 in.) Length: cm (54,33 in.) Wing Area: dm2 (68,2 sq.in.) Weight: g. RTF less battery (49,26 oz) Radio: Channel with 4 mini servo Recommended power set up: Motor:... Hacker A30-14L ESC:. X40 SBec-Pro Battery:.Flight Power S or more Propeller:..... APC 14x7E

2 Table of contents Table of contents Required radio, motor and battery Additional required items, tools and adhesives... 3 Warning... 3 Before starting assembly... 3 Using the manual... 4 Warranty information... 4 Section 1 ailerons installation... 5 Section 2 aileron servo & control horn installation Section 3 rudder installation... 9 Section 4 elevator installation Section 5 elevator servo & control horn installation Section 6 rudder servo & control horn installation.. 14 Section 7 landing gear, wheels and shark fin installation.16 Section 8 electric motor installation Section 9 final radio installation...21 Wings installation Control throws Recommended CG Range test your radio

3 Required radio, motor and battery Radio equipment: Minimum 4-channel radio system 4 digital mini servo, recommended JR PROPO DS385 or DS381 2 servo extension 600mm, for elevator and rudder servo 2 servo extension 200mm, for aileron servo Recommended electric motor for best performance: Hacker A30-14L + X40 SBec-Pro controller + APC 14x7 E Recommended Li-Po battery pack for best performance: Flight Power EVO S...or more for longer duration Additional required item, tools and adhesives Tools: Drill Drill bits: 1,5mm, 2mm, 3mm Phillips screwdriver Hobby knife Soldering iron Adhesives: thin CA medium CA Warning This RC aircraft is not a toy! If misused, it can cause serius bodily harm and damage to property. Fly only in open areas, preferably in official flying sites, following all instructions included with your radio and motor. This plane is a compromise between Aerobatics and 3D flying, and not a pylon racer. It is built with a very light structure and for this reason we hardly recommend: Do NOT fly your airplane at high speed, because this may cause structural failures. Before starting assembly Before starting the assembly, remove each part from its bag and protection for a prior inspection. Closely inspect the fuselage, wing panels, rudder, and stabilizer for damage. If you find any damage or missing parts, contact the place of purchase. If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use caution while working around areas where the covering material overlap to prevent separating the covers. 3

4 Using the manual This manual is divided into sections to help make assembly easier to understand and to provide breaks between each major section. In addition, check boxes ( ) have been placed next to each step to keep track of each step completed. Steps with two boxes indicate that the step will require repeating, such as for a right or left wing panel, two servos, etc. Rember to take your time and follow the directions. Warranty information SebArt garantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any parts damage by use or modification, and in no case shall SebArt s liability exceed the original cost of the purchased kit. Further, SebArt reserve the right to change or modify this warranty without notice. In that SebArt has no control over the final assembly or material used for the final assembly, no liability shall be assumed or accepted for any damage of the final user-assembled product. By the act of using the product, the user accepts all resulting liability. If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit immediately in new and unused condition to the place of purchase. SebArt di Sebastiano Silvestri Via Trento 69/ Mezzolombardo (TN) Italy 4

5 Section 1 ailerons installation step 1 Trial fit the three aileron hinges, included in the hardware pack, in their place and verify the correct position and alignment of the aileron with the wing panel. step 2 Carefully glue, with some drops of thin CA, each of the three hinges in the aileron. step 3 Locate the aileron and carefully glue, with some drops of thin CA, the hinges into the wing panel. 5

6 step 4 Work the aileron up and down some times to work the hinges and check for proper movement. step 5 Locate the anti-stall/lift generator, and with an hobby knife open the four small slots on top of the wing panel, as per picture. step 6 Install and glue with some drop of thin CA the anti-stall/lift generator on the wing panel, as per picture. step 7 ( BEGINNER OPTION ) Secure the aileron with a piece of transparent tape, as per picture. 6

7 step 8 Repeat steps 1 through 7 for the remaining wing panel. ( If you chose the beginner option, please go direct to Section 3 of this manual ) Section 2 aileron servo & control horn installation step 1 Locate the following items included in the hardware pack, one 200mm extension and the servo (not included). step 2 With an hobby knife open the servo bay into wing panel and the fibre glass control horn location in the aileron. 7

8 step 3 Install the servo hardware (gommets and eyelets) and put the servo into the wing panel, as per pictures. step 4 Drill using a 1,5mm drill bit, and install the servo into the wing panel using a Phillips screwdriver. step 5 Glue the fibreglass horn with medium CA into the aileron. 8

9 step 6 Install the hardware and make the final adjustment as per pictures. step 7 Repeat steps 1 through 6 for the remaining wing panel. Section 3 rudder installation step 1 Locate the following items, as per picture. 9

10 step 2 Insert the three hinges in their appropriate slots of the rudder, and glue them with some drops of thin CA. step 3 Carefully locate the rudder and glue the hinges with some drops of thin CA. step 4 Check the alignment of the rudder and fuselage, than glue the rudder with some drops of medium CA, as per pictures. step 5 10

11 Work the rudder right and left some times to work the hinges and check for proper movement. Section 4 elevator installation step 1 Insert in the elevator the four hinges into their appropriate slots and verify the correct position and alignment of the elevator with the stabilizer. step 2 Carefully glue the hinges, with some drops of thin CA, in the elevator only. Than insert carefully the elevator through the fuselage. 11

12 step 3 Insert carefully the stabiliser into fuselage space and check the alignment with the rudder. step 4 Locate the elevator hinges into the stabiliser. Glue carefully the hinges in the stabiliser with some drops of thin CA. step 5 Once satisfied with the alignment, glue carefully with thin CA the stabilizer at the fuselage. 12

13 Section 5 elevator servo & control horn installation step 1 Locate the following items included in the hardware pack, servo extension 600mm long and servo (not included). step 2 Than install the servo hardware (gommets and eyelets) and locate the servo into the fuselage. step 3 Drill using a 1,5mm drill bit, and install the servo into the fuselage using a Phillips screwdriver. 13

14 step 4 Glue the fibreglass horn with medium CA into the elevator. Than install the hardware and make the final adjustment as per picture. Section 6 rudder servo & control horn installation step 1 Locate the following items included in the hardware pack, servo extension 400mm long and servo. step 2 Than install the servo hardware (gommets and eyelets) and locate the servo into the fuselage. 14

15 step 3 Drill using a 1,5mm drill bit, and install the servo into the fuselage using a Phillips screwdriver. step 4 Glue the fibreglass horn with medium CA into the elevator. step 5 Install the hardware and make the final adjustment as per picture. 15

16 Section 7 landing gear, wheels and shark fin installation step 1 Locate the following items included in the hardware pack. step 2 Install wheel and wheel pant as per pictures. 16

17 step 3 Repeat steps 2 for the other side of the landing gear. step 4 Locate the landing gear on the fuselage and fix it with the 3 screws included in the hardware pack. 17

18 step 5 Test fit the L.G. Lift Generator and his alignment with the fuselage. step 6 Glue carefully the landing gear fillet with some drops of medium CA, as per picture. 18

19 step 7 Repeat step 5 and 6 for the other side of the landing gear. step 8 With an hobby knife open the three slots in the cover on top of the fuselage. Than glue carefully the shark fin with some drops of medium CA, as per picture. Section 8 electric motor installation We recommend to use HACKER motor, you need the following items (not included): Hacker A30-14L + X40 controller + APC 14 x 7 E 19

20 step 1 Locate the motor and fix it with the four screws included in the motor hardware pack. step 2 Locate and fix the ESC and his switch as per picture. 20

21 step 3 Glue with some drops of medium CA the Velcro strip included in the hardware pack. step 4 Fix carefully the prop and spinner. Section 9 final radio installation Install the receiver, two extension 200mm for aileron servos and the battery pack as per the picture. 21

22 Wings installation Locate the wing panels and fix them using the wing retainer, as per picture. Control throws Please, follow carefully the recommended linkage setups for ailerons, elevators and rudder. For the AILERON we recommend the following throws: Low rate: 20 up / 20 down Expo: 20% High rate: 40 up / 40 down Expo: 60% For the ELEVATOR we recommend the following throws: Low rate: 20 up / 20 down Expo: 20% High rate: 40 up / 40 down Expo: 60% For the RUDDER we recommend the following throws: Low rate: 30 left / 30 right Expo: 20% High rate: 40 left / 40 right Expo: 60% 22

23 Note: the Expo is (+) for JR systems, and ( ) for Futaba systems Use the recommended expos to soften the feel of the model, expecially on high rates. The goal is to get the model to feel the same around neutral as it does on low rates. Recommended CG The recommended Center of Gravity location is 110mm behind the leading edge of the wing against the fuselage. Use the Flight Power battery pack, moving it forward or backward, to achieve the correct balance. Range test your radio Before fly, be sure to range check your radio as manufacturer s instruction manual of you radio-system recommand. Double-check all controls (aileron,elevator, rudder and throttle) move in the correct direction. Be sure that your Flight Power batteries are fully charged, as per the instructions and that your radio is fully charged as per its instructions. Finally... have a nice flight! SebArt di Sebastiano Silvestri Via Trento 69/ Mezzolombardo (TN) Italy 23

SebArt professional line AngelS 30E ARF

SebArt professional line AngelS 30E ARF SebArt professional line AngelS 30E ARF ASSEMBLY MANUAL The new AngelS 30E ARF, was designed by the 10 times F3A Italian Champion Sebastiano Silvestri, it is the replica of his 2 meter size F3A competition

More information

How To Build A Roc Plane

How To Build A Roc Plane SebArt professional line AngelS EVO 50E ARF ASSEMBLY MANUAL The new AngelS EVO 50E ARF, was designed by the 10 times F3A Italian Champion Sebastiano Silvestri, it is the replica of his 2 meter size F3A

More information

SebArt professional line

SebArt professional line SebArt professional line New Sukhoi 29S 50E ARF ASSEMBLY MANUAL The new Sukhoi 29S 50E ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri and the design is based on of his new Tournament Of

More information

SebArt professional line

SebArt professional line SebArt professional line Mini Avanti 1.4m ARF EDF or P20 micro-turbine ASSEMBLY MANUAL The all new Mini Avanti Jet 1.4m ARF was designed by Italy aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model

More information

Technical data. Assembly: Introduction. Before starting construction. Equipment needed. Glider or Electro Glider?

Technical data. Assembly: Introduction. Before starting construction. Equipment needed. Glider or Electro Glider? Palio pro S2084 Technical data Wing span: Lenght: Weight: Wing area: Wing loading: El. Motor/ no. of cells: Controls: Introduction 2150 mm 1150 mm 1120 g 1860 g 42 dm2 27 g/dm2 44 g/dm2 600 / 7-8 cells

More information

Specifications. *Specifications are subject to change without notice.*

Specifications. *Specifications are subject to change without notice.* INSTRUCTION MANUAL Extra 300 EP (0) 50W Motor System Requires : -channel radio w/ mini servos, Outrunner Motor KM37810, w/ Propeller Adaptor HW3010, 0A Brushless ESC with 11x8E proepller, cells 1.8V 300mAh

More information

Introduction. Table of Contents. Specifications

Introduction. Table of Contents. Specifications Assembly Manual Table of Contents Introduction...2 Table of Contents...2 Warning...3 Additional Required Equipment...3 Additional Tools and Adhesives...3 Contents of Kit/Parts Layout...4 Warranty Information...5

More information

RETRACTABLE LANDING GEAR

RETRACTABLE LANDING GEAR HUGHES H-1 RETRACTABLE LANDING GEAR INSTALLATION INSTRUCTIONS Congratulations on your decision to add retractable landing gear to your RC model of the Hughes H-1. Though originally conceived simply for

More information

Katana EP. Specifications. 301 sq in / 19.4 sq dm. * Specifications are subject to change without notice.*

Katana EP. Specifications. 301 sq in / 19.4 sq dm. * Specifications are subject to change without notice.* INSTRUCTION MANUAL Katana EP Outrunner Motor Requires: -channel radio w/ micro servos, 0A Brushless ESC, 3 cells.v 00mAh Li-Po battery & charger. Wing Span Wing Area Flying Weight Fuselage Length HIGH

More information

Mini Edge 540 3D. Assembly Manual

Mini Edge 540 3D. Assembly Manual Mini Edge 540 3D Assembly Manual 2 Table of Contents Introduction...2 Specifications...2 Contents of Kit/Parts Layout...3 Required Electronics & Accessories...4 Recommended High Performance Motor Setup*...4

More information

PRODUCT MANUAL SPECIFICATIONS SAFETY PRECAUTIONS. 1460mm/57.48in 1112mm/43.78in 27.74dm²/429.96in² 1600g/56.50oz 57.68g/dm²

PRODUCT MANUAL SPECIFICATIONS SAFETY PRECAUTIONS. 1460mm/57.48in 1112mm/43.78in 27.74dm²/429.96in² 1600g/56.50oz 57.68g/dm² SPECIFICATIONS SAFETY PRECAUTIONS PRODUCT MANUAL Wing span: Length: Wing area: Flying weight: Wing loading: 1460mm/57.48in 1112mm/43.78in 27.74dm²/429.96in² 1600g/56.50oz 57.68g/dm² This electric R/C model

More information

Assembly Manual For. Dolphine Jet. Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC. www.pilot-rc.com

Assembly Manual For. Dolphine Jet. Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC. www.pilot-rc.com Assembly Manual For Dolphine Jet Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC www.pilot-rc.com INTRODUCTION Thank you for purchasing our Dolphin Jet. we strive to achieve the real

More information

T-28 Trojan Instruction Manual Charge-and-Fly Park Flyer

T-28 Trojan Instruction Manual Charge-and-Fly Park Flyer T-28 Trojan Instruction Manual Charge-and-Fly Park Flyer Wingspan: 44 in (1118mm) Length: 36 in (914mm) Weight (RTF): 30 oz (875 g) Servos: Four 3-wire servos Motor: PKZ 480 960Kv outrunner brushless motor

More information

Assembly and Operating Manual Nano warbirds FW 190 Specification: *Length: 18 1/2"(470mm) *Wing Span: 21 7/10"(550mm)

Assembly and Operating Manual Nano warbirds FW 190 Specification: *Length: 18 1/2(470mm) *Wing Span: 21 7/10(550mm) Assembly and Operating Manual Nano warbirds FW 190 Specification: *Length: 18 1/2"(470mm) *Wing Span: 21 7/10"(550mm) *Flying Weight: 6 1/2 oz (185g) Dear customer, Congratulations on your choice of a

More information

Brief introduction----------------------------------------------------------------------------03

Brief introduction----------------------------------------------------------------------------03 A-1 skyraider Brief introduction----------------------------------------------------------------------------03 Specification----------------------------------------------------------------------------------03

More information

Super Stunts 60. Specifications. * Specifications are subject to change without notice.*

Super Stunts 60. Specifications. * Specifications are subject to change without notice.* A L M O S T- R E A D Y- T O - F LY INSTRUCTION MANUAL Super Stunts 60 0.60-0.75 cu. in. displacement 2-stroke Requires : 4- channel radio w / Specifications 5 standard servos Wing Span Wing Area Flying

More information

1/5 PIPER J-3 CUB. Before commencing assembly,please read these instructions thoroughly. Wing Span:84. 0 in / 2130 mm

1/5 PIPER J-3 CUB. Before commencing assembly,please read these instructions thoroughly. Wing Span:84. 0 in / 2130 mm INSTRUCTION MANUAL Before commencing assembly,please read these instructions thoroughly. 1/5 PIPER J-3 CUB 1/5 PIPER J-3 CUB Wing Span:8. 0 in / 130 mm Wing Area:968 sq in / 6. 5 sq dm Flying Weight:8.

More information

Skywalker X8. Assembly manual January 2013

Skywalker X8. Assembly manual January 2013 Skywalker X8 Assembly manual January 2013 This Manual Was Created by Ray Grauberger www.raygrauberger.com Technical Data This is the X-8 FPV wing from Skywalker Technology. The BIG FPV wing! The X-8 has

More information

60 Sbach 342 Electric Aerobatic Aircraft

60 Sbach 342 Electric Aerobatic Aircraft 60 Sbach 342 Electric Aerobatic Aircraft Specifications: Wing Span: 60 inches Length: 58 inches Power: Hacker A50-14S (or equivalent) Battery: 3800 5-cell LiPo ESC: 60-70 amp Flying Weight: 4.75-5.25 lbs

More information

Assembly Manual For. 30cc 88 Skywolf. www.pilot-rc.com. Note: some photos on the manual is not from Skywolf. But the installation way is the same.

Assembly Manual For. 30cc 88 Skywolf. www.pilot-rc.com. Note: some photos on the manual is not from Skywolf. But the installation way is the same. Assembly Manual For 30cc 88 Skywolf Wingspan: 88 in www.pilot-rc.com Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC Note: some photos on the manual is not from Skywolf. But the installation way is

More information

TopSky DLG Installation Manual

TopSky DLG Installation Manual TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper

More information

COMPLETE KIT PARTS LIST

COMPLETE KIT PARTS LIST Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction. Wood Bag: COMPLETE KIT PARTS LIST 1 LC-504-01 3/32"x4"x24" Laser Cut Balsa Sheet

More information

O P E R A T I N G I N S T R U C T I O N S

O P E R A T I N G I N S T R U C T I O N S O P E R A T I N G I N S T R U C T I O N S CAUTION The Phase 3 Models Fantom is designed for intermediate to advanced pilots. It's not intended for beginners. It is not a trainer! Specifications AND Features:

More information

Introduction to RC Airplanes. RC Airplane Types - Trainers, Sport RC Planes, 3D Acrobat RC Airplanes, Jets & More

Introduction to RC Airplanes. RC Airplane Types - Trainers, Sport RC Planes, 3D Acrobat RC Airplanes, Jets & More Introduction to RC Airplanes RC Airplane Types - Trainers, Sport RC Planes, 3D Acrobat RC Airplanes, Jets & More RC Airplane Types RC airplanes come in a few distinct categories. Each category generally

More information

Focke-Wulf Fw 190 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Focke-Wulf Fw 190 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Focke-Wulf Fw 90 Specification: Length :9 mm(57") Wing Span :00 mm(70.9") Wing Area :5. sq. dm.0 sq. ft Wing Loading :0. g/sq. dm.7 oz/sq. ft Flying Weight :5. kg(. lbs) Radio :ch& servos Engine :0 -cycle

More information

BUILDING INSTRUCTION SAL-DLG MINI-FIREWORKS. MINI-Fireworks building instruction May 2015. www.pcm.at 1

BUILDING INSTRUCTION SAL-DLG MINI-FIREWORKS. MINI-Fireworks building instruction May 2015. www.pcm.at 1 Wingspan [mm]: 950 Aspect ratio: 7,7 Wing area [dm2]: 11,7 Wing loading [g/dm²] : 12-13 Takeoff weight [g]: 155 (Mini-S), 165 (Mini-Q) Airfoil: AG03 mod 3-side-view version with ailerons BUILDING INSTRUCTION

More information

Sundowner 36 ARF Assembly Manual

Sundowner 36 ARF Assembly Manual Sundowner 36 ARF Assembly Manual Notice All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature,

More information

MS:158 ASSEMBLY MANUAL. Graphics and specifications may change without notice.

MS:158 ASSEMBLY MANUAL. Graphics and specifications may change without notice. MS:158 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications: Wing span ------------------------------70.9in (180cm). Wing area -----------------644.8sq.in (41.6sq dm).

More information

P-51 Mustang 60 ARF Assembly Manual

P-51 Mustang 60 ARF Assembly Manual P-51 Mustang 60 ARF Assembly Manual Specifications Wingspan: 65 in (1653mm) Length: 57 in (1448mm) Wing Area: 743 sq in (47.9 sq dm) Weight: 9.25 10.0 lb (4.2 4.5 kg) Wing Loading: 29 31 oz per sq ft Radio:

More information

WE GET PEOPLE FLYING INSTRUCTION MANUAL

WE GET PEOPLE FLYING INSTRUCTION MANUAL TM WE GET PEOPLE FLYING INSTRUCTION MANUAL 90% prebuilt Great sport scale appearance Factory installed retracts Precovered in genuine UltraCote Prepainted fiberglass cowl Specifications Wingspan:... 65.5

More information

Assembly Manual For 100cc aerob 100cc aero a b ti t c pl p ane www. www pi p l i ot o --rc.com rc.com

Assembly Manual For 100cc aerob 100cc aero a b ti t c pl p ane www. www pi p l i ot o --rc.com rc.com Assembly Manual For 100cc aerobatic plane www.pilot-rc.com INTRODUCTION Thank you for purchasing our new 100cc aerobatic plane. we strive to achieve a good quality quick build ARF aircraft. It requires

More information

Toledo Special 40 Assembly Manual

Toledo Special 40 Assembly Manual Toledo Special 40 Assembly Manual Specifications Wingspan:... 69.5 in (1765.3mm) Length:... 50.8 in (1290.75mm) Wing Area:...702.8 sq in (45.3 sq dm) Weight:... 5.5 6.25 lb (2.49 2.83 kg) Radio:...4-channel

More information

Assembly Manual For. Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC

Assembly Manual For. Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC Assembly Manual For 50cc aerobatic plane Wingspan: 88 in Wingarea: 1479.8 sp in Length: 78.8 in Engine: 50CC www.pilot-rc.com INTRODUCTION Thank you for purchasing our new 50cc aerobatic plane. we strive

More information

Park 250 Brushless Outrunner Instructions

Park 250 Brushless Outrunner Instructions Park 250 Brushless Outrunner Instructions Thank you for purchasing the E-flite Park 250 Brushless Outrunner motor. This motor is ideal for 3D models 4-6 oz (115-170g), and sport and scale models 6-12 oz

More information

DL50 Discus Launch Glider

DL50 Discus Launch Glider DL50 Discus Launch Glider DL50 Specifications Length: 39 in. (99 cm.) Wingspan: 50in. (127 cm.) Wing Area: 275in 2 (1774 cm 2 ) Weight: 8oz. (227 g.) Revision History Date Revision Notes/Comments 6/12/2004

More information

40% EXTRA 330L ARF Manual

40% EXTRA 330L ARF Manual 40% EXTRA 330L ARF Manual Please read through the entire manual first. It contains important instructions and warnings concerning the finishing of the model. WARRANTY AND PRODUCT DISCLAIMER Radiowave Hobby

More information

INSTRUCTION MANUAL. Specification: collective pitch 3D quadcopter. TYPE: Collective Pitch Electric 3D Quadcopter. Rotor Diameter: 118MM.

INSTRUCTION MANUAL. Specification: collective pitch 3D quadcopter. TYPE: Collective Pitch Electric 3D Quadcopter. Rotor Diameter: 118MM. collective pitch 3D quadcopter INSTRUCTION MANUAL Specification: TYPE: Collective Pitch Electric 3D Quadcopter Rotor Diameter: 118MM Length:635 MM Width: 365 MM Weight: 986g w/out battery Flying weight

More information

You motor now is ready to run. Wires Connection: Installing the Controller: Normal start up:

You motor now is ready to run. Wires Connection: Installing the Controller: Normal start up: Dear customer, Thanks for purchase of our Brushless Motor Controller. This is a new generation of sensorless speed controllers, with latest humanize software design, especially for ALL types of brushless

More information

Phoenixtech Brushless Motor Speed Controller Programming Guide

Phoenixtech Brushless Motor Speed Controller Programming Guide Congratulations on the purchase of your new Phoenixtech Brushless Motor Speed Controller. This latest series of controllers is unique in that it is equipped with a robust internal switching Battery Eliminator

More information

Tango 40 ARF Assembly manual

Tango 40 ARF Assembly manual Tango 40 ARF Assembly manual Specifications Wingspan... 48.2 in (1225mm) Wing Area... 747 sq in (48.2 sq dm) Length... 49.4 in (1255mm) Weight... 5.5 6.5 lb (2.5 kg 2.95 kg) Engine....56.82 Four-Stroke....40.52

More information

Hawker Sea Fury 480 ARF. Assembly Manual

Hawker Sea Fury 480 ARF. Assembly Manual Hawker Sea Fury 480 ARF Assembly Manual Notice All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature,

More information

High Alpha 3D Maneuvers

High Alpha 3D Maneuvers High Alpha 3D Maneuvers Harrier Pass Elevator Back Flip Parachute Whip Stalls Rolling Harrier 3D Rolling Turn 3D Knife Edge C-82 Rudder Warmup Note: Every flight mode and maneuver presented in this section

More information

P-40B Warhawk 50 ARF Assembly Manual

P-40B Warhawk 50 ARF Assembly Manual P-40B Warhawk 50 ARF Assembly Manual NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature,

More information

PT-19 ARF. Assembly Manual. Specifications

PT-19 ARF. Assembly Manual. Specifications PT-19 ARF Assembly Manual Specifications Wingspan: 45 in (1440mm) Length: 36 in (910mm) Wing Area: 310 sq in (19.9 sq dm) Weight w/o Battery: 22 24 oz (680 740 g) Weight w/battery: 27 29 oz (820 880 g)

More information

harbor cub Electric Remote Control Airplane Model 92906 assembly & Operating Instructions

harbor cub Electric Remote Control Airplane Model 92906 assembly & Operating Instructions harbor cub Electric Remote Control Airplane Model 92906 assembly & Operating Instructions IMPORTANT: If damage is caused due to a crash, your warranty is void. Visit our website at: http://www.harborfreight.com

More information

BUILDING INSTRUCTION ERWIN XL slope ERWIN XL ultralight - ERWIN XL ultralight Elektro. Erwin XL building Instruction October 2012. www.pcm.

BUILDING INSTRUCTION ERWIN XL slope ERWIN XL ultralight - ERWIN XL ultralight Elektro. Erwin XL building Instruction October 2012. www.pcm. Wing span [mm]: 3000 Aspect ratio: 14,67 Wing area [dm2]: 61,33 Wing loading: Erwin XL slope: 45,6-70,1 Erwin XL ultralight: 20,4 Erwin XL ultralight Elektro: 23,6-24,5 Weight [g]: Erwin XL slope: 2800-4300

More information

DeNight Special 50 ARF Assembly Manual

DeNight Special 50 ARF Assembly Manual DeNight Special 50 ARF Assembly Manual Specifications Wingspan... 58.5 in (1486mm) Length... 45.4 in (1153 mm) Wing Area... 626 sq in (40.4sq dm) Weight... 6 1/4 7 lb (2.8 3.2 kg) Radio... 4-channel w/4

More information

P-51D Mustang Sport 40 ARF Assembly Manual

P-51D Mustang Sport 40 ARF Assembly Manual P-51D Mustang Sport 40 ARF Assembly Manual Specifications Wingspan:... 58.25 in (1480mm) Length:... 50.4 in (1281mm) Wing Area:...626 sq in (40.39 sq dm) Weight:... 6.5 7 lb (2.9 3.2 kg) Radio:...4- to

More information

Build and Fly the Fokker D- 8

Build and Fly the Fokker D- 8 Details are carefully carried out. Note movable controls The high wing gives it unusual stability Build and Fly the Fokker D- 8 Complete Data From Which You Can Build a Successful Model of a Famous German

More information

J-3 Cub BL Instruction Manual

J-3 Cub BL Instruction Manual J-3 Cub BL Instruction Manual PKZ4517 6 0 5 4 8 2 5 4 8 4 7 9 ParkZone products are distributed exclusively by Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, IL 61822 2007 Horizon Hobby, Inc. www.parkzone.com

More information

INSTRUCTION MANUAL. Black Angel. www.copterx.com. Features. Kit Helicopter. Copyright 2009 KY MODEL Company Limited.

INSTRUCTION MANUAL. Black Angel. www.copterx.com. Features. Kit Helicopter. Copyright 2009 KY MODEL Company Limited. INSTRUCTION MANUAL Features - Carbon fiber main blade, tail blade, fly paddle, tail fin for extra weight saving and durability. - CNC machined high grade aluminum rotor head and tail gear box to ensure

More information

ASSEMBLE ONLY WITH ADULT SUPERVISION

ASSEMBLE ONLY WITH ADULT SUPERVISION RTF ASSEMBLE ONLY WITH ADULT SUPERVISION Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly and flight characteristics of this airplane prior to assembly.

More information

Have fun, nevertheless!

Have fun, nevertheless! Nanomum The Nanomum is a small pusher gyro for flying indoors or outdoors in very calm weather. It's got a dc head and is easy to build and easy to fly - I hope. Specs: AUW 70 g / 2.5 oz. Rotor diameter:

More information

Micro. Pitts Special for the RFFS-100 by Chris O Riley

Micro. Pitts Special for the RFFS-100 by Chris O Riley Micro Pitts Special for the RFFS-100 by Chris O Riley F1 F2 F3 F4 1 2 3 4 All wood 1/32 inch sheet unless otherwise stated. F1 F2 F3 F4 Small balsa blocks for LG reinforcement Small balsa blocks for LG

More information

Use blue thread lock on all bolts and blind nuts! Assembly Manual for Yak 54 -by Pilot RC

Use blue thread lock on all bolts and blind nuts! Assembly Manual for Yak 54 -by Pilot RC Assembly Manual for Yak 54 -by Pilot RC 1. Inventory the parts in your kit and familiarize yourself with the assembly manual before starting on this project. If this is your first aerobatic model, get

More information

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com KIT NO.: SIGRC76EGARFG - (Green and White) SIGRC76EGARFR - (Red and White) SPECIFICATIONS: Wing Span: 51.5 in. (1308 mm) Wing Area: 725 sq. in. (46.7 dm 2 ) Length: 48.25 in. (1226 mm) Flying Weight: 5-5.5

More information

DHC-2 Beaver ARF. Assembly Manual. Specifications. Weight w/o Battery: 4 4.25 oz (1.8 1.9 kg)

DHC-2 Beaver ARF. Assembly Manual. Specifications. Weight w/o Battery: 4 4.25 oz (1.8 1.9 kg) DHC-2 Beaver ARF Assembly Manual Specifications Wingspan: 68 in (1735mm) Length: 43 in (1090mm) Wing Area: 565 sq in (36.4 sq dm) Weight w/ Battery: 4.9 6.2 lb (2.2 2.8 kg) Weight w/o Battery: 4 4.25 oz

More information

Convert your Losi Micro Vehicle from Brushed to Brushless power

Convert your Losi Micro Vehicle from Brushed to Brushless power Convert your Losi Micro Vehicle from Brushed to Brushless power Before we begin the conversion, let s make sure we have all the components you will need. Parts Required: A You will need a NEW servo to

More information

50cc Edge 540T ARF. Instruction Manual. Copyright 2009 Extreme Flight RC

50cc Edge 540T ARF. Instruction Manual. Copyright 2009 Extreme Flight RC 50cc Edge 540T ARF Instruction Manual Copyright 2009 Extreme Flight RC 1 Please take a few moments to read this instruction manual before beginning assembly. We have outlined a fast, clear and easy method

More information

74 EDGE 540T ARF. Instruction Manual. Copyright 2014 Extreme Flight RC

74 EDGE 540T ARF. Instruction Manual. Copyright 2014 Extreme Flight RC 74 EDGE 540T ARF Instruction Manual Copyright 2014 Extreme Flight RC 1 Please take a few moments to read this instruction manual before beginning assembly. We have outlined a fast, clear and easy method

More information

INSTRUCTION MANUAL. 90% Pre-Built Build as Tail dragger or Tricycle Landing Gear System All Hardware Included

INSTRUCTION MANUAL. 90% Pre-Built Build as Tail dragger or Tricycle Landing Gear System All Hardware Included 90% Pre-Built Build as Tail dragger or Tricycle Landing Gear System All Hardware Included INSTRUCTION MANUAL Specifications for.40 Wingspan: 52-3/4" Length: 48" Wing Area: 593 sq. in. Weight (Approx):

More information

LOSB9595 1/36 th Brushless ESC and 10250Kv Motor Combination

LOSB9595 1/36 th Brushless ESC and 10250Kv Motor Combination LOSB9595 1/36 th Brushless ESC and 10250Kv Motor Combination Thank you for purchasing this Losi High Performance Brushless System! This technically advanced system will offer maintenance free operation,

More information

Sopwith Camel 60 ARF

Sopwith Camel 60 ARF Sopwith Camel 60 ARF Assembly manual Specifications Wingspan... 61 in (1551mm) Wing Area... 1236 sq in (79.7 sq dm) Length... 41.3 in (1050mm) Weight... 7.25 8.75 lb (3.3kg 4.0kg) Table of Contents Contents

More information

Youth TAKE FLIGHT. Fun Fly. Review. June 2013 $5.95. June 2013 Volume 39, Number 6. Maxford USA GEE BEE MODEL E

Youth TAKE FLIGHT. Fun Fly. Review. June 2013 $5.95. June 2013 Volume 39, Number 6. Maxford USA GEE BEE MODEL E SAL TAIBI Fun Fly Youth TAKE FLIGHT DJI PHANTOM Review June 2013 $5.95 June 2013 Volume 39, Number 6 Maxford USA GEE BEE MODEL E MAXFORD GEE BEE MODEL E Greg Gimlick maelectrics@gimlick.com The author

More information

INSTRUCTION MANUAL WARRANTY

INSTRUCTION MANUAL WARRANTY INSTRUCTION MANUAL Wing Span - 44-3/4 in Wing Area - 305.7 sq in Weight - 9.5 13.5 oz Wing Loading - 4.5 6.4 oz/sq ft Fuse Length - 28-5/8 in MADE IN USA WARRANTY Great Planes Model Manufacturing Co. guarantees

More information

Written By: Walter Galan

Written By: Walter Galan ipad 2 GSM Front Panel Replacement Replace the front panel in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Note: this is a complete guide for replacing a plain front panel. If you have a Front

More information

INSTRUCTION MANUAL. Champaign, Illinois (217) 398-8970, Ext 5 airsupport@greatplanes.com

INSTRUCTION MANUAL. Champaign, Illinois (217) 398-8970, Ext 5 airsupport@greatplanes.com INSTRUCTION MANUAL Wingspan: 28 in [710 mm] Wing Area: 209 sq in [13.4 dm 2 ] Weight: 12 13 oz [340 370 g] Wing Loading: 8.3 8.9 oz/sq ft [25 27 g/dm 2 ] Length: 15 in [380 mm] Radio: 3-channel minimum

More information

Brushless Motors Instructions

Brushless Motors Instructions Brushless Motors Instructions Thank you for purchasing the Dynamite Fuze Brushless Motor. Fuze brushless motors are high torque motors designed for direct-drive applications. The 1/18 versions feature

More information

Manual LOGO 400 SE. www.mikado-heli.de

Manual LOGO 400 SE. www.mikado-heli.de Manual www.mikado-heli.de LOGO 400 SE Mikado Model Helicopters GmbH Friedrich-Klausing-Straße 2 14469 Potsdam Germany Phone +49 (0)331 23749-0 Fax +49 (0)331 23749-11 www.mikado-heli.de Mikado Model Helicopters

More information

Night Flying 101. By: Bob Beswetherick

Night Flying 101. By: Bob Beswetherick Night Flying 101 By: Bob Beswetherick As a member of a southern Tennessee R/C club, I have been night flying with other members for 3 years now. We night fly sometimes till the wee hours of the morning

More information

Gripper Kit for the Boe-Bot Robot (#28202)

Gripper Kit for the Boe-Bot Robot (#28202) 599 Menlo Drive, Suite 100 Rocklin, California 95765, USA Office: (916) 624-8333 Fax: (916) 624-8003 General: info@parallax.com Technical: support@parallax.com Web Site: www.parallax.com Educational: www.stampsinclass.com

More information

ASSASSIN Building Instructions by CRASHTESTHOBBY.COM

ASSASSIN Building Instructions by CRASHTESTHOBBY.COM ASSASSIN Building Instructions by CRASHTESTHOBBY.COM The Assassin is the toughest plane on the planet!!! The Assassin can take more abuse and keep on flying better than any other plane we have seen. It

More information

Instruction Manual Specification:

Instruction Manual Specification: Instruction Manual Specification: Wingspan: 1855mm (73 ) Length: 1970mm (77.5 ) Weight: 7.5-9Kg (Approx.) Radio: 6+ Channel (Required) Turbine: 50-100N (5-10Kg) (Recommended) Introduction Congratulations

More information

OWNER S MANUAL Keep these instructions for future reference as they contain important information.

OWNER S MANUAL Keep these instructions for future reference as they contain important information. CHOKING HAZARD Small parts. Not for children under years. Sparc! is distributed exclusively by Horizon Hobby Inc. Champaign, IL 8 00 www.sparctoys.com www.horizonhobby.com 09. OWNER S MANUAL Keep these

More information

Tips For Converting RC Gas Engines To Electric Motors.

Tips For Converting RC Gas Engines To Electric Motors. Tips For Converting RC Gas Engines To Electric Motors. By Carl Baer Version 2.0 2008 Copyright 2008 HowToMakeRCAirplanes.com & Carl Baer Information in this documentation is the property of HowToMakeRCAirplanes.com

More information

Written By: Walter Galan

Written By: Walter Galan ipad 2 GSM LCD Replacement Replace the LCD in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Use this guide to replace a broken LCD. TOOLS: iopener (1) Phillips #00 Screwdriver (1) Plastic Opening

More information

AR6400T User Guide Bedienungsanleitung AR6400T Guide de l utilisateur AR6400T AR6400T Guida per l utente

AR6400T User Guide Bedienungsanleitung AR6400T Guide de l utilisateur AR6400T AR6400T Guida per l utente AR6400T User Guide Bedienungsanleitung AR6400T Guide de l utilisateur AR6400T AR6400T Guida per l utente NOTICE All instructions, warranties and other collateral documents are subject to change at the

More information

Scorpion Helicopter Motor Application Guide

Scorpion Helicopter Motor Application Guide Scorpion Helicopter Motor Application Guide Since we get so many questions about the application of the Scorpion HK series helicopter motors, we have put together this guide for the entire family of motors

More information

INSTRUCTION MANUAL. 1610 Interstate Drive Champaign, IL 61822 (217) 398-8970, Ext 2 airsupport@greatplanes.com

INSTRUCTION MANUAL. 1610 Interstate Drive Champaign, IL 61822 (217) 398-8970, Ext 2 airsupport@greatplanes.com INSTRUCTION MANUAL Big Stik.40: Wingspan: 58.5 in. [1486mm] Wing Area: 770 sq. in. [49.7 sq dm] Weight: 5.25 lbs [2380g] Wing Loading: 15.7 oz./sq. ft.[48 g/sq dm] Length: 51.5 in. [1308mm] Radio: 4-Channel

More information

Building Instructions ELEKTRO KADETT. For electric motor and two or three Li-Po cells. This model requires a four-function radio control system

Building Instructions ELEKTRO KADETT. For electric motor and two or three Li-Po cells. This model requires a four-function radio control system to Order No. 9574 Building Instructions ELEKTRO KADETT For electric motor and two or three Li-Po cells This model requires a four-function radio control system Specification Wingspan approx. 1600 mm Fuselage

More information

ipad 2 GSM Headphone Jack & SIM Slot Replacement

ipad 2 GSM Headphone Jack & SIM Slot Replacement ipad 2 GSM Headphone Jack & SIM Slot Replacement Replace the Headphone jack/sim slot in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Use this guide to replace a broken headphone jack or SIM card

More information

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com Shown with optional 2 Spinner (not included) Wing Span: 78 in. (1980 mm) Wing Area: K 1148 sq. in. (74.1 dm2) Length: 65 in. (1651 mm) Flying Weight: 8-8.5 lbs. (3629-3856 g) Wing Loading: K16.0-17.0 oz./sq.ft.

More information

Introduction to RC Fixed-Wing Aircraft. Kitsap Aircraft Radio Control Society (K-ARCS)

Introduction to RC Fixed-Wing Aircraft. Kitsap Aircraft Radio Control Society (K-ARCS) Introduction to RC Fixed-Wing Aircraft Kitsap Aircraft Radio Control Society (K-ARCS) 1 Introduction So you want to start building and flying radio controlled (RC) aircraft! Welcome! 2 Introduction The

More information

104" EXTRA 300 ARF. Assembly Manual. Copyright 2012 Extreme Flight RC

104 EXTRA 300 ARF. Assembly Manual. Copyright 2012 Extreme Flight RC 104" EXTRA 300 ARF Assembly Manual Copyright 2012 Extreme Flight RC 1 Please take a few moments to read this instruction manual before beginning assembly. We have outlined a fast, clear and easy method

More information

VBAR NEO. Quick Start Guide Express-Firmware

VBAR NEO. Quick Start Guide Express-Firmware VBAR NEO Quick Start Guide Express-Firmware Welcome to VBar NEO! VBar NEO is an innovative product setting new standards for model helicopters in terms of flight performance and programming capacity. Features:

More information

Written By: Walter Galan

Written By: Walter Galan ipad 2 GSM Rear Camera Replacement Replace the rear camera in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Use this guide to replace a broken rear camera. TOOLS: ifixit Opening Picks set of 6

More information

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com Wingspan: 72 in. (1829 mm) Wing Area: 720 sq.in. (46.5 dm 2 ) Length: 51-3/4 in. (1315 mm) Flying Weight: 5-5.5 lbs. (2268-2495 g) Wing Loading: 16-17.6 oz./sq.ft. (49-54 g/dm 2 ) Radio Required: 4 Channel

More information

ECM-D70T / ECM-D70T1.5

ECM-D70T / ECM-D70T1.5 Elliptical Ceiling Dual Mount for 37 to 50 Flat Panels INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9531-041-001-01 Contents ECM-D70T / ECM-D70T1.5 Installation Tools... 3 Parts List...

More information

Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic

Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator

More information

Information Technology Solutions

Information Technology Solutions Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly

More information

Extra 260 ASSEMBLY MANUAL. Specifications

Extra 260 ASSEMBLY MANUAL. Specifications Extra 260 ASSEMBLY MANUAL Specifications Wingspan:... 78.25 in (198.8 cm) Length:... 71.25 in (181 cm) Wing Area:... 1134 sq in (73.1 sq dm) Weight:... 12 15.5 lb (5.44 7.0 kg) Radio:... 4-channel w/6

More information

Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty

Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page

More information

Operating Manual for LCD DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM WWW.DYNAM-RC.COM

Operating Manual for LCD DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM WWW.DYNAM-RC.COM Operating Manual for LCD DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM WWW.DYNAM-RC.COM Catalog Function of Transmitter Contents Specifications Notice for flying Notification before Using Description of four

More information

Carbon-Z. Yak 54 3X. Instruction Manual Bedienungsanleitung Manuel d utilisation Manuale di Istruzioni

Carbon-Z. Yak 54 3X. Instruction Manual Bedienungsanleitung Manuel d utilisation Manuale di Istruzioni Carbon-Z Yak 54 3X Instruction Manual Bedienungsanleitung Manuel d utilisation Manuale di Istruzioni NOTICE All instructions, warranties and other collateral documents are subject to change at the sole

More information

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com

SIG MFG. CO., INC. PO Box 520 Montezuma, IA 50171-0520 www.sigmfg.com SPECIFICATIONS Wing Span: 65 in. (1651 mm) Wing Area: 800 sq. in. (51.6 dm²) Length: 54.7 in. (1389 mm) Flying Weight: 4.8-5.0 lbs. (2177-2268 g) Wing Loading: 13.8-114.4 oz./sq.ft. (42-44 g/dm2) Radio:

More information

Note there are many options for how this model can be built, including:

Note there are many options for how this model can be built, including: Page 1 Introduction Welcome to the Su-37 park jet! This model was designed for twin Littlescreamers Park Jet (LSPJ) motors and features a working 3- axis thrust vectoring (TV) system, just like the real

More information

DIY Y6. Build Manual V.A 2014

DIY Y6. Build Manual V.A 2014 DIY Y6 Build Manual V.A 2014 1 Contents Thanks for purchasing a DIY Y6! These instructions will show you how to assemble a Y6 using the Pixhawk autopilot system and ArduCopter/APM:Copter firmware. If you

More information

A high performance model glider for slope soaring, designed by James D Hammond and brought to you by Sloperacer.

A high performance model glider for slope soaring, designed by James D Hammond and brought to you by Sloperacer. Schwing 88 A high performance model glider for slope soaring, designed by James D Hammond and brought to you by Sloperacer. Thank you for purchasing the Schwing 88. The design remit was to extend the flight

More information

Remote control radio glider USER S MANUAL

Remote control radio glider USER S MANUAL Remote control radio glider USER S MANUAL Contents Technical Parameter 01 Features 01 Warning 01 Please read the following instructions and fully understand it 02 Main parts of the airplane 02 Flying adjustment

More information