Digibar II: PE300. Data Sheet. Digital pressure gage. Special features. Dimensions (in mm) Lithium battery (not included) B

Transcription

1 Digibar II: PE00 Digital pressure gage Data Sheet Special features Operated as a manometer with battery operation and Operated as a pressure transmitter with 4-20 current output, freely adjustable Clear multi-function display, exact and fast pressure readings on the spot Limit-relay board, (option) (changeover contacts, fail-safe) Operating voltage failureproof storage of settings in EEPROM Available up to 2000 bar NEW: oil-resistant version also available Dimensions (in mm) Lithium battery (not included) approx octagonal 94 approx. 140 Standard screwed cable gland Skintop PG16, enclosed, can be fitted left or right Standard pressure connector for PE00: G1/2 external, form B. For more pressure connectors, see last page. Reasonably priced, standard version available from stock PE00: G1/2 external pressure connector Nominal (rated) measuring range, 0 bar - Short order code 10 bar 1-PE00A1/010B 20 bar 1-PE00A1/020B PE00 0 bar 1-PE00A1/00B 100 bar 1-PE00A1/100B 200 bar 1-PE00A1/200B 00 bar 1-PE00A1/00B

2 Specifications (per DIN ) Product family Digibar II Type 1-PE00A1/...; K-PE00... Accuracy class 0. Accuracy class option of increased measurement accuracy for K-PE Mechanical input characteristics Nominal (rated) measuring range (gage pressure), 0 bar... bar Natural frequency of the membrane approx. khz Membrane attenuation Operating range Overload range Test pressure Destructive range limits During dynamic loading permissible pressure 100 permissible vibration bandwidth (to DIN 0 100) Material of parts in contact with measurement medium stainless steel: 1.442; Dead volume mm Control volume mm Output characteristics Resolution of the of the digital display (max.); adjustable step size d Output span Nominal (rated) value Range (2-wire) (-wire) Allocation between current output and measured quality (measuring span) meaningful Output span, tolerances Display Current output with 00 ohm burden Effect of ohm burden for 0-20 device Factory settings Two-wire/three-wire relay Three-wire relay Zero signal compensation range Shifting the display zero point µa 4-20 or 0-20 approx approx freely adjustable 1: or max. 60 (rel. to value at 00 ohms) 0 bar = 4 0 bar = Temperature coefficient of the zero signal relative to the nominal (rated) measuring span per 10 K typically 0. (max. 0.) with the increased measurement accuracy option per 10 K typically 0.1 (max. 0.2) Temperature coefficient of the output span relative to the actual value per 10 K +0,2 0,1 for the increased measurement accuracy option per 10 K 0,1 Characteristic curve deviation, origin setting for the increased measurement accuracy option typically 0.1 (max. 0.1) Tolerance of the zero signal 0. Tolerance of the output span 0. for the increased measurement accuracy option typically 0.1 (max. 0.2) Hysteresis typically 0.0 (max. 0.1) Repeat standard deviation 0.0 Maximum measurement frequency at current output Hz approx. 1. HBM 2

3 Display rate, transmitter operation 1/s 4 Display rate, battery operation 1/s 1 Display rate, battery operation (ECO) 1/min 6 Response time of MIN/MAX value store and bar graph Transmitter operation s 0. (max.) typically 0.2 Battery operation s 1 (max.) Battery operation (ECO) s 10 (max.) Limit values Number of limit value switches 2 Range of adjustment of limit values Range of adjustment of hysteresis Limit relay (relay board option, K-PE00...) Response time of relay s 0.2 Release time of relay s 0.2 Type of contact no-potential changeover switch and reversible enabled/disabled state Maximum switching voltage 20 V eff Maximum current 2 A Internal effective capacitance/inductance - Auxiliary energy Supply voltage, nominal (rated) range for transmitter operation V 8-0V Max. current consumption (starting current) Max. current consumption when operated with relay board Nominal (rated) voltage, battery operation V 0 (without relay) 12.6 Supply voltage range, battery operation V Recommended battery type lithium battery.6 V, 1. Ah Size D Alternative battery operation Battery life (continuous operation) Battery life (continuous operation, ECO) Battery life, with 2 x 1. V miniature cells (alkaline), uninterrupted 2 x miniature 1. V; Size AA 1 year 2 years 4 weeks Ambient conditions Nominal (rated) temperature range o C LCD function o C Operating temperature range o C Storage temperature range o C Max. media temperature for cooling by ambient temperature ( 60 C) o C 110 Reference temperature o C 2 Impact resistance (type-tested to DIN IEC 68) Impact acceleration Vibration acceleration (frequency 10 Hz 100 Hz) Vibration acceleration, relay function EMC Immunity from interference Noise emission Measurement error m/s 2 m/s 2 m/s EN EN0011, EN0022 class B 0. Degree of protection per DIN 40 00, IEC 29 IP6 Material of parts in contact with the environment aluminum - polyester-coated; polyamide 6.6; stainless steel 1.401; steel, galvanized; brass, nickel-plated; fluorine caoutchouc; silicone rubber Mounting position any Weight, approx. g 700 Accessories (included) Skintop PG16 screwed cable gland, battery contact springs, gaskets Accessories (available to order): Lithium battery.6 V 1. Ah Order no Power supply unit Order no Power pack for support rail mounting 20 V, 0 60 Hz/1 V = 60 Order no. 1-NT101A Mounting bracket for support rail mounting Order no HBM

4 Options for the PE PE 00 A1/ : standard, calibrated in bar with G1/2 pressure connection K - PE 00 : variants made to order K - PE 00 A2 : variants made to order, calibrated in psi Code Option 1 Measuring range bar psi 010B B B B B B KB KB Code Option 2 Pressure connection 1 G1/2 Form B external thread 1 M20 x 1. external thread 14 G1/4 Form B external thread 16 G1/2 Form D external thread 17 NPT 1/4-18 external thread 21 G/4 external thread Code Option Electrical configuration I4N 4 20, 2-wire or battery operation I0N 0 20, -wire or battery operation I0R -wire with relay, battery operation not possible 0 20, freely adjustable Factory setting: 0 bar = 4 ; 100 = 20 Code Option 4 Electrical connection C Screwed cable gland D Male connector to DIN 460 *), battery operation not possible H HAN 7D/8U connector *), battery operation not possible Code Option NO without DL oil-resistant (diesel, diesel substitute, etc. ) Code Option 6 Accuracy **) Code Option 7 Operating options N Normal S Special Code Option 8 Pressure connection L Standard clear S For measurement medium oxygen Order no.: 1-PE00A1/ B Ordering example: K-PE B 1 I 0 R H N O 1 S L *) connector fitted on left **) at 10 bar: 0.2 Devices with are available in the standard version for immediate dispatch from stock. They are standard versions, as specified on the title page. For this version, only the short order code need be specified (see title page). HBM 4

5 Current output operating field 1100 Load resistance [ Ω ] Load resistance (burden) R L U B 8V 0, 020A Operating field U B 8...0V Supply voltage [V] 24 0 Possible pressure connections for K-PE00 G 1/2 Form B , Ø6 Ø17, ISO228-G1/2 dead volume:* 260 mm Full scale value: 1600 bar ** 8 Gasket included in scope of supply , Ø Ø17, G1/2A-DIN16288D Dead volume:* 260 mm Full scale value: 1600 bar ** Material: G 1/2 Form D Packing surfaces for compact lens or tapered gasket 0 o o G 1/4 Form B , M20 x 1. NPT1/ , IS0 228 G1/4 Packing surface for Flat gasket G /4 Form D for K-PE00 Ø 42 +0, Ø2, G/4A-DIN16288-D Dead volume:* 0mm Full scale value: 2000 bar ** 0 o Packing surfaces for compact lens or tapered gasket 22 o Ø6 Gasket Ø17, included in scope of M20 x 1. supply Dead volume:* 260 mm Full scale value: 1600 bar ** NPT1/4-18 Ø1,72 Dead volume:* 190 mm Full scale value: 1000 bar ** * Add dead volume of connector element to dead volume of measuring instrument ** Data per DIN HBM

6 Modifications reserved. All details describe our products in general form only. They are not to be understood as express warranty and do not constitute any liability whatsoever. Hottinger Baldwin Messtechnik GmbH Postfach , D Darmstadt, Germany Im Tiefen See 4, D-6429 Darmstadt, Germany Tel.: 061 1/ 8 0-0; Fax: 061 1/ support@hbm.com