For use under conditions that do not provide headroom for standard lift hardware. Requires minimum vertical space above opening.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "For use under conditions that do not provide headroom for standard lift hardware. Requires minimum vertical space above opening."

Transcription

1 Low Headroom Track, Rear Mount Torsion For use under conditions that do not provide headroom for standard lift hardware. Requires minimum vertical space above opening. Low headroom hardware is designed to move the door to its horizontal position with a double-track system that requires a minimum amount of headroom. The upper track controls the movement of the door through the radius. The lower track controls all other sections with a large radius. Low headroom track requires from 6-1/2 (16.1mm) to 10 (254.0mm) headroom (depending on door and track size.) Sideroom requirements are increased. Two inch track is used on the majority of doors. Three inch track is used on very large or heavy usage doors. Two inch track is engineered for doors 16-0 (4877mm) or less in height. It is generally accepted as standard track for all except very large doors, or doors designed for exceptionally heavy usage or abuse. Three inch track is required on all doors over 16-0 (4877mm) high. For heavy usage or expected abuse, three inch track may be specified for any size door. Track Mounting Types Wood Jambs are used to provide the track mounting surface on wood frame construction or masonry construction not using a steel frame. A continuous angle or brackets are fastened to the track, with the mounting leg turned out, away from the opening and lag bolted to the wood jamb. The opening size and the door size are the same. The weather seal is accomplished by wood, aluminum, or vinyl stop molding fastened to the jambs. Steel jambs are used to provide the mounting surface on masonry construction with a steel frame in the opening, structural members, or roll-formed steel frames in pre-engineered buildings. Angle is fastened to the track with the mounting leg turned in toward the opening and fastened to the jamb by bolting or welding. The door overlaps the opening 1 (25.4mm) on each side and at the top. The weather seal is formed by the overlap. Additional perimeter seals are available. Specifications Low Headroom Track With Rear Torsion: to be provided as shown on architectural drawings. Supply 2 (0.8mm) or 3 (76.mm) track, as required by the manufactures design. Mount tracks to wood or steel jambs as shown on architectural drawings. Maximum door weight is 800 lbs.

2 Low Headroom Track, Rear Mount Torsion: Section View

3 Low Headroom Track, Rear Mount Torsion Detail: Wood

4 Low Headroom Track, Rear Mount Torsion Detail: Steel

5 Low Headroom Track, Front Mount Torsion For use under conditions that do not provide headroom for standard lift hardware. Requires minimum vertical space above opening. Low headroom hardware is designed to move the door to its horizontal position with a double-track system that uses minimum headroom. The upper track controls the movement of the door through the radius. The lower track controls all other sections with a large radius. Low headroom track requires from 15 (381.0mm) to 18-1/2 (469.9mm) headroom (depending on door and track size). Side room requirements are increased. Two inch track is used on the majority of doors. Three inch track is used on very large or heavy usage doors. Two inch track is engineered for doors weighing up to 800 lbs. (363kgs) and 16-0 (4877mm) or less in height. It is generally accepted as standard track for all except very large doors, or door designed for exceptionally heavy usage or abuse. Three inch track is required on all doors weighing more than 800 lbs. (363kgs) and over 16-0 (4877mm) high. For heavy usage or expected abuse, three inch track may be specified for any size door. Track Mounting Types Wood jambs are used to provide the track mounting surface on wood frame construction or masonry construction not using a steel frame. A continuous angle or spaced brackets are fastened to the track, with the mounting leg turned out, away from the opening and lag bolted to the wood jamb. The opening size and the door size are the same. The weather seal is accomplished by wood, aluminum, or vinyl stop molding fastened to the jamb. Steel jambs are used to provide the mounting surface on masonry construction with a steel frame in the opening, structural members, or roll-formed steel frames in pre-engineered buildings. A continuous angle is fastened to the track with the mounting leg turned in toward the opening and fastened to the jamb by bolting or welding. The door overlaps the opening 1 (25.4mm) on each side and at the top. The weather seal is formed by the overlap. Additional perimeter seals are available. Specifications Low Headroom Track With Front Torsion: to be provided as shown on architectural drawings. Supply 2 (50.8mm) or 3 (76.2mm) track, as required by the manufactures design. Mount tracks to wood or steel jambs as shown on architectural drawings.

6 Low Headroom Track, Front Mount Torsion: Section View

7 Low Headroom Track, Front Mount Torsion: Wood

8 Low Headroom Track, Front Mount Torsion: Steel

Residential Garage Door Terminology

Residential Garage Door Terminology A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom

More information

The flat piece of plywood represents the engine with transmission in plan view (from above).

The flat piece of plywood represents the engine with transmission in plan view (from above). Inboard engine installation Template for engine beds (This tutorial is excerpted from our shop manual Plywood Cored Composite Boat Construction. The manual covers the other parts of the inboard engine

More information

Garden Windows Builders Vinyl

Garden Windows Builders Vinyl TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right

More information

Installation Manual Box Rail Series

Installation Manual Box Rail Series Installation Manual Box Rail Series INTRODUCTION THANK YOU for purchasing Real Sliding Hardware. Our hardware will add a stunning accent to your living environment and maximize its space. It is made with

More information

Window Installation Instructions

Window Installation Instructions Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for

More information

WHI 90-Minute Rated Veneered Door Frame Installation Instructions

WHI 90-Minute Rated Veneered Door Frame Installation Instructions No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,

More information

Vinyl Greenhouse Window Page 2 of 6 New Contruction Installation Instructions

Vinyl Greenhouse Window Page 2 of 6 New Contruction Installation Instructions New Construction Installation Instructions EPLACEMENT Installation Instructions Page 2 of 6 New Contruction Installation Instructions 1. Frame rough opening equal to window call out size. ough opening

More information

Sun Windows General Information Sun New Construction Window Installation Instructions

Sun Windows General Information Sun New Construction Window Installation Instructions Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten

More information

Wisconsin Building Products Evaluation

Wisconsin Building Products Evaluation Safety & Buildings Division 201 West Washington Avenue P.O. Box 2658 Madison, WI 53701-2658 Evaluation # 200813-O Wisconsin Building Products Evaluation Material Best Management Standards for Foundation

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

4 5/16 Subframe Installation

4 5/16 Subframe Installation 4 5/16 Subframe Installation The subframe system is a great installation tool for installing windows in masonry conditions. Typically subframes are used in masonry openings so that windows can be anchored

More information

CLEAR-DIVISIONS APERTO

CLEAR-DIVISIONS APERTO CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the

More information

Mark Cramer Inspection Services, Inc.

Mark Cramer Inspection Services, Inc. Mark Cramer Inspection Services, Inc. 492 Twentieth Avenue, Indian Rocks Beach, FL 34635-2970 (727) 595-4211 Fax (727) 596-7583 Certified Member #12085 American Society of Home Inspectors Construction

More information

Includes specifications for: Surface Cleaning & Mounting Hardware.

Includes specifications for: Surface Cleaning & Mounting Hardware. Three-Part Specifications - Copyright 2014 - Nixalite of America Inc Bird Screen Welded Wire Mesh Barriers Includes specifications for: Surface Cleaning & Mounting Hardware. Nixalite offers full rolls

More information

PRODUCT OVERVIEW: "Standard" Product Features and Benefits: Look for these features when comparing similar products.

PRODUCT OVERVIEW: Standard Product Features and Benefits: Look for these features when comparing similar products. POCKET DOORS PRODUCT OVERVIEW: Hufcor offers pocket doors to close the openings of operable wall storage pockets. It has been our experience that one of the types shown in these specifications will work

More information

DIGITUS Network & Server Cabinets. UNIQUE Series

DIGITUS Network & Server Cabinets. UNIQUE Series DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door

More information

Installation Manual for the Rockmeister Roof Ladder Exclusively for Mercedes-Benz Geländewagen W460, W461 & W463 with single rear door

Installation Manual for the Rockmeister Roof Ladder Exclusively for Mercedes-Benz Geländewagen W460, W461 & W463 with single rear door Installation Manual for the Rockmeister Roof Ladder Exclusively for Mercedes-Benz Geländewagen W460, W461 & W463 with single rear door NOTE: W460 & W461 models have a different Frame Bracket than the W463.

More information

Installation Instructions For Slider Casement Air Conditioners

Installation Instructions For Slider Casement Air Conditioners Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT

More information

INSTALLATION INSTRUCTIONS FOR COMMERCIAL STEEL GARAGE DOORS

INSTALLATION INSTRUCTIONS FOR COMMERCIAL STEEL GARAGE DOORS INSTALLATION INSTRUCTIONS FOR COMMERCIAL STEEL GARAGE DOORS Door Basics spring support torsion spring drum rear track support end bearing spring warning tag top fixture horizontal track top section #3

More information

FRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.

FRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs. FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds

More information

F-Series Camera Mounting Accessories

F-Series Camera Mounting Accessories F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,

More information

Sprinter Door Adjustment Supplement

Sprinter Door Adjustment Supplement DOOR ADJUSTMENT PROCEDURES Proper door adjustment is essential in applications with extended use of sliding door and rear cargo doors. Misadjusted doors will reduce the service life of door hinges and

More information

CLEAR-DIVISIONS VARIOTEC TRIMLESS

CLEAR-DIVISIONS VARIOTEC TRIMLESS CLEAR-DIVISIONS VARIOTEC TRIMLESS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOTEC TRIMLESS moveable glass wall system.

More information

Packaged Terminal Air Conditioner Wall Sleeve Installation

Packaged Terminal Air Conditioner Wall Sleeve Installation Installation & Maintenance Data IM 1196 Group: PTAC Part Number: 910141799 Date: October 2013 Packaged Terminal Air Conditioner Installation x 42" PGAN with Top-Mounted Hydronic Heat Note: Installation

More information

GreenGuard Housewrap Installation Guide

GreenGuard Housewrap Installation Guide 000768PACBPHW_Flashing Bro 5/23/03 2:52 PM Page 1 For the most current product information, go to www.green-guard.com. Pactiv Building Products believes the information and recommendations herein to be

More information

Air-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association

Air-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association Air-Conditioning, Heating, and Refrigeration Institute Sheet Metal and Air-Conditioning Contractors National Association GUIDELINE B-1997 ACKNOWLEDGEMENT These guidelines for Roof Mounted Outdoor Air-

More information

Stair Railing. Installation Guide

Stair Railing. Installation Guide Stair Railing Installation Guide THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance

More information

FULLWHITE. Purely the picture.

FULLWHITE. Purely the picture. FULLWHITE Purely the picture. FULLWHITE Purely the picture. Have you ever thought of the pure projection screen? No borders. No depth. Fullwhite makes the picture float in space. This pure design product

More information

ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT. Rendered to: BEKAERT SPECIALTY FILMS, LLC

ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT. Rendered to: BEKAERT SPECIALTY FILMS, LLC ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT Rendered to: BEKAERT SPECIALTY FILMS, LLC SERIES/MODEL: Panorama 8-mil Film PRODUCT TYPE: Fixed Window with Applied Film This

More information

EDD-401. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction

EDD-401. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to

More information

MEDIUM FLAT PANEL DISPLAY STATIC MOUNT MSR Series

MEDIUM FLAT PANEL DISPLAY STATIC MOUNT MSR Series INSTALLATION INSTRUCTIONS MEDIUM FLAT PANEL DISPLAY STATIC MOUNT The static mount accommodates medium flat panel displays weighing up to 125 lbs (57 kgs). The teardrop holes in the mount allow for quick

More information

PRE-ASSEMBLED INSTALLATION INSTRUCTIONS FOR PACB SERIES COAL FIRED OVENS

PRE-ASSEMBLED INSTALLATION INSTRUCTIONS FOR PACB SERIES COAL FIRED OVENS PRE-ASSEMBLED INSTALLATION INSTRUCTIONS FOR PACB SERIES COAL FIRED OVENS OVENS MANUFACTURED BY: EARTHSTONE OVENS-6717 SAN FERNANDO RD GLENDALE CA 91201 TELEPHONE: 800-840-4915 818-553-1134 FAX: 818-553-1133

More information

-1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX

-1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX -1-002085 CONE SETTER PLATFORM ATTACHMENT INDEX I. GENERAL EQUIPMENT : A. Intent Statement B. Cone Setter Platform II. III. 1. Understructure Frame 2. Mounting Components 3. Paint 4. Basket 5. Labels 6.

More information

Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls)

Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls) Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls) The Peterson Pocket Door System has been engineered to function in T.M. Cobb (www.tmcobb.com)

More information

WINDOW PANNING AND TRIMS

WINDOW PANNING AND TRIMS OCTOBER, 2010 PANNING AND TRIMS GENERAL INFORMATION 1 EXTERIOR PANNING Panning is primarily used to cover the perimeters of existing building openings prior to the installation of replacement windows.

More information

2.9 WINDOW & DOOR BUCKS

2.9 WINDOW & DOOR BUCKS 2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place

More information

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: NORSE, INC.

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: NORSE, INC. Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: NORSE, INC. SERIES/MODEL: Flush Mount/Surface Mount PRODUCT TYPE: Hurricane Shutter Fastening System This report contains in its

More information

GLASS WALL POCKET DOORS

GLASS WALL POCKET DOORS GLASS WALL POCKET DOORS KWIK-WALL... One Source for Wall Systems. KWIK-WALL s Pocket Doors for glass wall systems bring you the clear solution to your space division requirements. The beauty and elegance

More information

WINDOW INSTALLATION GUIDE

WINDOW INSTALLATION GUIDE WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information

More information

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended

More information

WALL-MOUNT WASH STATION

WALL-MOUNT WASH STATION YOU WILL NEED: Phillips Screwdriver Leveling Device Drill 5/32 inch Hex Key Drill Bits: 1/4 inch (6.4 mm) 1/2 inch (13 mm) Power Screwdriver With Phillips Bit Shims (provided in hardware kit) R A-DEC INC.

More information

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: CORAL ARCHITECTURAL PRODUCTS

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: CORAL ARCHITECTURAL PRODUCTS Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: CORAL ARCHITECTURAL PRODUCTS SERIES/MODEL: PW 256 with Door Openings PRODUCT TYPE: Aluminum Impact Resistant Curtain Wall System

More information

Installation Guide for Andersen Architectural Clad Outswing Commercial Doors

Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance

More information

Architectural Specifications* MODEL HDE

Architectural Specifications* MODEL HDE MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page

More information

SAMPLE TEST QUESTIONS GLAZER - ITA WEBSITE

SAMPLE TEST QUESTIONS GLAZER - ITA WEBSITE 1 Small amounts of hazardous chemicals used on several shifts are to be transferred from one container to another. How should the new container be labeled? A. Mark new container with product name only.

More information

Installation Guide for Andersen Architectural Wood Inswing Entry Doors

Installation Guide for Andersen Architectural Wood Inswing Entry Doors Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are

More information

Stainless Steel Continuous Hinges

Stainless Steel Continuous Hinges Stainless Steel Continuous Hinges Hager heavy duty stainless steel continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed

More information

Roof Curbs, Extensions and Equipment Supports

Roof Curbs, Extensions and Equipment Supports Roof s, Extensions and Equipment Supports December 2012 Roof Page s, Header Extensions and Equipment Supports Table of Contents Model GPI Standard and Optional Construction Features... 3 Model Number Code....

More information

glass & Glazing Products

glass & Glazing Products glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system

More information

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read

More information

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product

More information

Tundra Series Windows January 2016

Tundra Series Windows January 2016 Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing

More information

Installation Instructions

Installation Instructions Installation Instructions READ BEFORE INSTALLING UNIT For Low Profile Window Air Conditioner INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step

More information

GUIDELINES FOR REHABILITATION OF TRADITIONAL COMMERCIAL BUILDINGS DESIGN GUIDELINES

GUIDELINES FOR REHABILITATION OF TRADITIONAL COMMERCIAL BUILDINGS DESIGN GUIDELINES GUIDELINES FOR REHABILITATION OF TRADITIONAL COMMERCIAL BUILDINGS DESIGN GUIDELINES PAGE 13 DESIGN GUIDELINES The following design guidelines have been developed to guide appropriate design in the Downtown

More information

TECTUS Concealed Hinges

TECTUS Concealed Hinges Concealed Hinges index TE 240 3d up to 40 kg (88 lbs) 6 TE 340 3d up to 80 kg (176 lbs) 7 TE 525 3d up to 120 kg (264 lbs) 8 TE 526 3d up to 120 kg (264 lbs) 9 TE 527 3d up to 120 kg (264 lbs) 10 TE 540

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS

CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,

More information

STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER

STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER Thank you for purchasing the Steel-Rite II or III, model 52242 commercial sectional door from RITE-HITE

More information

100 Series Desk Stand Catalog

100 Series Desk Stand Catalog INNOVATIVE ERGONOMIC SOLUTIONS 100 Series Desk Stand Catalog Ergotech s 100 Series are the best Desk Stands on the market today. Along with the standard tilt, rotation and height adjustment features you

More information

Ceiling Mounted Folding Attic Ladders Installation Instructions

Ceiling Mounted Folding Attic Ladders Installation Instructions Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:

More information

Installation Instructions

Installation Instructions READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:

More information

Free-Stand Cabinets PROLINE Network Switch Cabinets

Free-Stand Cabinets PROLINE Network Switch Cabinets 763.422.2588 Spec-00525 M763.422.2661 Free-Stand Cabinets PROLINE Network s Free-Stand Cabinets PROLINE Network s PROLINE Network INDUSTRY STANDARDS EIA 310-D APPLICATION PROLINE Network Switch cabinet

More information

Awning Instructions. Standard Manual 1.5m to 4.5m

Awning Instructions. Standard Manual 1.5m to 4.5m Awning Instructions Standard Manual 1.5m to 4.5m English Standard Manual Instructions Contents Warning 1.5m 3.0m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning 1 x Winder handle

More information

Support Joining Guide

Support Joining Guide Guide Guide for Andersen Casement, Awning, and Picture Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are essential

More information

CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio

CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio STANDARD FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 12 centers starting 6 in from the end. PRICE LIST No. PB-36

More information

ENTRANCES AND FRAMES INSTALLATION MANUAL

ENTRANCES AND FRAMES INSTALLATION MANUAL ENTRANCES AND FRAMES INSTALLATION MANUAL 11/18/13 Tubelite Inc. 0 of 31 11/18/13 Tubelite Inc. 1 of 31 INSTALLATION NOTES Allow 1/4" minimum shim and sealant space at sides and top of door frame. Door

More information

We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.

We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit. Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden

More information

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL STERNMOUNT MARINE TOWER KIT OWNER S MANUAL VERSION 1.5 Made in the USA by: Southwest Windpower 1801 W. Route 66 Flagstaff, AZ 86001 (520) 779-9463 AIR Marine is a trademark of Southwest Windpower Inc.

More information

Important Information for Installer & Homeowner

Important Information for Installer & Homeowner Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side

More information

Custom Scroll Saw Stand Plan

Custom Scroll Saw Stand Plan The rear leg is angled back rees. The front legs are angled rees to each side, but aren t angled forward in order to keep the design simpler, and to not interfere with the operator s ability to sit/stand

More information

We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.

We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit. Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden

More information

ARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84" Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors

ARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84 Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors Drawing Board Storage, Open Drawing Board Storage, Doors Drawing Board Storage Notebook Storage, Open 1670 D : 23.25" holds 32 drawing boards 1 shelf, adjustable on 1¼" increments maximum board height

More information

foot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs.

foot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs. Skylight Installation Instructions This document provides instruction and guidelines for installation of both curb mount (CM) and self flashing (SF) unit skylights on flat, pitched (> or equal to 3/12

More information

WL002 INSTALLATION INSTRUCTIONS

WL002 INSTALLATION INSTRUCTIONS 1993-2002 Camaro, Firebird TOOLS REQUIRED: Hydraulic jack and stands or service lift Die grinder with cutoff wheel or similar cutting tool (See Step 12 below) Tin snips Wrenches and sockets: 7mm, 13mm,

More information

Snow Blower Cab. Owners Manual. Heavy Duty Vinyl Cover Heavy Gauge Tubular Steel Frame. Model No. 25016. Safety Assembly Operation Maintenance Parts

Snow Blower Cab. Owners Manual. Heavy Duty Vinyl Cover Heavy Gauge Tubular Steel Frame. Model No. 25016. Safety Assembly Operation Maintenance Parts Owners Manual Heavy Duty Vinyl Cover Heavy Gauge Tubular Steel Frame Snow Blower Cab Model No. 25016 CAUTION: Before using this product, read this manual and follow all of its Safety Rules and Operating

More information

Use a reasonable number of people with sufficient strength to lift, carry, remove and install glass. Panel may be heavy. Handle broken glass with extr

Use a reasonable number of people with sufficient strength to lift, carry, remove and install glass. Panel may be heavy. Handle broken glass with extr Improper re-glazing product (s) can affect the performance under stress and may contribute to property damage or injury in high wind conditions. The installer should not proceed with re-glazing if these

More information

INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)

INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions

More information

Quality Building Products for over 50 Years

Quality Building Products for over 50 Years Light Commercial Quality Building Products for over 50 Years Harvey Building Products is a leading manufacturer and distributor of high quality building products. We manufacture a complete line of superior

More information

Residential Deck Safety, Construction, and Repair

Residential Deck Safety, Construction, and Repair Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the

More information

2012 NFPA 101 LIFE SAFETY CODE EXIT STAIR PATH MARKINGS

2012 NFPA 101 LIFE SAFETY CODE EXIT STAIR PATH MARKINGS Compliance Guide 2012 NFPA 101 LIFE SAFETY CODE 7.2.2.5.5 EXIT STAIR PATH MARKINGS 7.2.2.5.5 Exit Stair Path Markings Where exit stair path markings are required in Chapters 11 through 43, such markings

More information

SELF-STEERING AXLE TABLE OF CONTENTS

SELF-STEERING AXLE TABLE OF CONTENTS SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -

More information

Installing Shutters using Fasteners

Installing Shutters using Fasteners Installing Shutters using Fasteners Electric drill, ¼" drill bit, 3 8" drill bit, hammer, and shutter fasteners. (¼" carbide drill bit is required for stucco, hardboard, fiber cement, brick or masonry.)

More information

Wood Sound Retardant Door Hardware Information Bulletin

Wood Sound Retardant Door Hardware Information Bulletin overly overly 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Wood Sound Retardant Door Hardware

More information

Lunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide

Lunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your

More information

FSD35, FSD36 AND FSD37 COMBINATION FIRE and SMOKE DAMPERS

FSD35, FSD36 AND FSD37 COMBINATION FIRE and SMOKE DAMPERS 3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 INSTALLATION INSTRUCTIONS FSD35, FSD36 AND FSD37 COMBINATION FIRE and SMOKE DAMPERS 11/2 HOUR UL555 RATED UL555S LEAKAGE RATED

More information

Folding & Sliding Stairs

Folding & Sliding Stairs Folding & Sliding Stairs Wood Folding stairs feature 1-2 more treads than the competition. More treads means easier access. Pre-drilled installation holes, easy first step down from attic for personal

More information

PART 1 GENERAL 1.1 SECTION INCLUDES

PART 1 GENERAL 1.1 SECTION INCLUDES J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including

More information

The Kodiak 2400 Seating System by Royal Stewart Ltd.:

The Kodiak 2400 Seating System by Royal Stewart Ltd.: The Kodiak 2400 Seating System by Royal Stewart Ltd.: PART 1 GENERAL 1.1 Description Telescopic Bleacher Seating includes either manually or electrically operated systems of multiple tiered seating rows

More information

LOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.

LOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete. LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and

More information

K700 series. Door Closer. Door Closer. Samhwa Precision Co., Ltd./Korea ASSA ABLOY Group Company. The global leader in door opening solutions

K700 series. Door Closer. Door Closer. Samhwa Precision Co., Ltd./Korea ASSA ABLOY Group Company. The global leader in door opening solutions series Samhwa Precision Co., Ltd./Korea series Overview Features Aluminum Alloy Body Standard, separate and independent, latch, sweep and back-check intensity valve Non-handed Adjustable power : size 2~5

More information

Sliding Patio Door Milgard Aluminum Door

Sliding Patio Door Milgard Aluminum Door Sliding Door Sliding Patio Door Milgard Aluminum Door The Series Sliding Door has been specially designed to meet the building practices and climatic conditions of the West Coast market. The door features

More information

HMMA 810 HOLLOW METAL DOORS HOLLOW METAL MANUAL -87 NAAMM STANDARD FOURTH EDITION METAL DOORS & FRAMES NAAMM 2 NAAMM 2 METAL DOORS & FRAMES

HMMA 810 HOLLOW METAL DOORS HOLLOW METAL MANUAL -87 NAAMM STANDARD FOURTH EDITION METAL DOORS & FRAMES NAAMM 2 NAAMM 2 METAL DOORS & FRAMES HOLLOW METAL MANUAL NAAMM STANDARD HMMA 810-87 8d METAL DOORS & FRAMES NAAMM 2 87 HOLLOW METAL HOLLOW METAL DOORS FOURTH EDITION NAAMM 2 87 8d METAL DOORS & FRAMES A Division of NATIONAL ASSOCIATION OF

More information

The minimum reinforcement for the stem wall is the placement of:

The minimum reinforcement for the stem wall is the placement of: PolySteel creates an ideal insulated stem wall for concrete slabs that can make this part of your project easier and faster, in addition to making your finished project more energy-efficient. Figures 3.20

More information

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 1. Lay out and familiarize yourself with the components and hardware supplied with the hitch. Note the included trailer wiring isolator

More information

DE Frame with C Series Sidelight

DE Frame with C Series Sidelight TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder

More information

Mounting Tripod Kit Installation Manual

Mounting Tripod Kit Installation Manual Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

Thermal Block Entrance Installation Manual. Thermal Entrances. Installation Instructions. 05/21/14 Tubelite Inc. Page 0 of 20

Thermal Block Entrance Installation Manual. Thermal Entrances. Installation Instructions. 05/21/14 Tubelite Inc. Page 0 of 20 Thermal Entrances Installation Instructions 2010 05/21/14 Tubelite Inc. Page 0 of 20 TABLE OF CONTENTS INSTALLATION NOTES........................................ 2 PARTS LIST........................................

More information

STORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems

STORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the

More information

Bumper Test Protocol (Version VI) April 2007

Bumper Test Protocol (Version VI) April 2007 Bumper Test Protocol (Version VI) April 2007 Insurance Institute for Highway Safety Bumper Test Protocol (Version VI) Bumper Test Configurations Four different bumper crash tests into a contoured, bumper-like

More information