Modular UPS System- Hot Swap Plug-In Module POWER + is a modular UPS system based on true on line battery topology. The POWER + is a breakthrough conc

Transcription

1 GAMATROIC Our Power, Your Confidence e x t G e n e r a t i o n U P S e x t G e n e r a t i o n U P S 3x208V 10kVA to 100kVA Parallel Redundant UPS System For Modularity and Upgrade >>> >> > > > >>>> >>

2 Modular UPS System- Hot Swap Plug-In Module POWER + is a modular UPS system based on true on line battery topology. The POWER + is a breakthrough concept in UPS technology and marks the beginning of a new generation of UPS s. Redundancy Flexibility & expansion options Incredible power density (volume and weight per capacity) Management and communications options User and environment friendly system Smaller footprint Lower heat Dissipation All this and more in one UPS system - the POWER +

3 Our UPS Grows With Your Business >>> >> > > > >>>> >> Parallel Redundant Structure POWER + is a parallel redundant UPS. The system comprises from 1 to 10 UPS modules each of 10kVA, a system controller, centralized static switch module and distribution block. It is a 3/3 system. In short - safer load! Flexibility and Modularity POWER + gives you maximum flexibility - it can be extended as the load increases, by simply sliding in more modules. POWER + is truly modular - upgradeable from 1 to 10 modules, each of 10kVA, allowing you to assemble a UPS system of up to 100kVA! True On-Line Battery - VFI POWER + is designed according to IEC standard: The Inverter always supplies the power to the load and it takes its power from either the a.c. input via the rectifier or from the battery. The rectifier has to be controlled so as to recharge and maintain the battery in a charged condition. In other words, the battery is connected between rectifier output and inverter input on common DC link. Green Power System POWER + is based on green power technology. The system has a unity input power factor (0.99) and a very low input THD. It operates in Continuous Current Mode (CCM), reducing line interferences (RFI / EMI). In short - clean environment! Active Current Sharing The system features active AC input, AC output and DC current sharing between the modules. In short - higher reliability! High Efficiency POWER + has an overall efficiency of up to 94%, and 97% efficiency during back up mode. In short - savings on electricity bills! Light & Compact Only 9.8kg per module! POWER + light weight and small dimensions allow for easy maintenance, reduced shipping costs and smaller foot print. Double Conversion True On-Line Battery (VFI) According to IEC AC Input Rectifier DC link Inverter AC Output Battery

4 Technical Specifications Topology Construction True Online Battery, Double Conversion VFI Modular Parallel Hot-Plugged Modules, Continuous Operation IPUT Voltage Voltage Range Current Frequency Power Factor THDI 3 X 208V++G -25% and +15% Max. 28A per phase for a single module, no inrush current at startup 47-63Hz % at full load OUTPUT Rated Power Frequency Tracking Range Frequency (in free-running mode) Slew Rate Voltage Static Regulation Regulation for Unbalanced Load Dynamic Response to 100% Load Step Overload Waveform THD Load CF (max) AC-AC Efficiency (nominal) DC-AC Efficiency (nominal) 10kVA/8kW to 100kVA/80kW 0.5 1, 2, 3, 4 Hz (selectable) 50/60Hz 0.1% 1Hz/sec 3 X 208V+ (adjustable) 1% 1% for 100% Unbalanced load 2% 110% for 10 min.;125% for 60 sec.;1000% for 1 cycle Sinusoidal Less than 2% for linear load 4:1 Up to 94% Up to 97% BATTERIES DC-Link Voltage 160V to 216V o. of Batteries 32 x 12V GEERAL Maximum Power Dissipation (Po=8KW) Ambient Temperature Relative Humidity Altitude Enclosure Cooling 510W (988 BTU) for a single module -10 o C to +40 o C (operating); -20 o C to +60 o C (storage) 95% max non-condensing 1500m w/o derating IP20 Forced - Multi-Fan with speed control STADARDS EMC Safety Design Low Magnetic Field Radiation IEC , FCC part 15/B U778; IEC IEC EMF as per ICIRP DIMESIOS 10kVA Module (H x W x D) Weight 88mm (2U) x 483mm (19 ) x 470mm 9.8Kg POWER + System (incl. STSW and base modules) Model Dimensions (cm) H W D 10kVA 69 20kVA 78 30kVA 40kVA 50kVA kVA 70kVA 80kVA kVA 100kVA Weight (Kg) ACOUSTIC OISE (@1.5m from front of unit) oise (dba) Half load oise (dba) Full load *All specifications are subject to change without prior notice

5 Control & Management POWER + Controller The POWER + sophisticated controller includes a unique true power analyzer, yet it does not become a single point of failure. Allows variety of communication options, such as TCP/IP-SMP-WEB and cellular (optional). It has a 3 languages LCD - English, Spanish and Polish. Power + management screen on a cellular phone Management Application POWER + controller has an internal communication card - GMaCi - and can be managed by Ethernet software/web interface. Gamatronic s PSM-POWER + UPS management software enables monitoring and controlling of the POWER + as well as automatic computer shutdown. The user-friendly GUI provides realtime monitoring which permits detailed operational control. POWER + can also be managed via wireless cellular communication, the WIG. By connecting a WIG device to the UPS, text messages regarding the UPS status and alarms can be sent to any cellular phone or PC with a wireless modem. The WIG allows communication to and from the POWER +. It enables the activation of the UPS in real-time. POWER + Controller Micro Controller core Display Other indications Analog input channels Digital input channels Real Time Clock (RTC) Voltage-Free outputs (dry contacts) Communication Communications with system modules Events Log System operation without controller On-Screen Parameters Language Power Meter Alarms Dimensions (H x W x D) (mm) 16 bit 4x40 Characters LCD with backlight 8 LED's, buzzer 4 8 With backup 6 TCP/IP-SMP-WEB, cellular (optional) Serial, isolated 255 events Continuous without disruption Load Bar-Graph; 3-phase Voltages; 3-phase Currents; Battery Voltage; Status of each UPS module; Static-Switch parameters and status; Battery Sensor Temperature (optional) and more English, Spanish, Polish Input & Output KW, KVA, PF AC abnormal; DC abnormal; UPS module(s) failure; Load on By Pass; Battery test failed; Overload; Over/Under temperature and more 88 (2U) x 483 (19 ) x 470

6 POWER + UL 208V Operation Modes Every POWER + UPS module can operate in the following modes. Switching from mode to mode is made through the controller menus and wiring. Phases Input/Output Input Output Input Output Current (in/out) voltage current power Option 1 3/3 3x120V+ (3x 208V) 3x23.6A 10kVA/8kW,, L3, + G 3x28A Option 2 2/2 2x120V+ (1x208V) 2x26.5A 7.5kVA/6kW,, + G 2x31A Option 3 2/2 2x120V+ (1x240V) 2x26.5A 7.5kVA/6kW,, + G 2x31A * Ph to Ph voltage (Ph to is 120v) ** In two phase configuratiuons is linked with L3 for phase one on input, while is the second input phase. For output it's linked with L3, and is the second phase. Both output phases [+L3]out and []out provide same current, while two input phases [+L3]in and []in will have different currents. Option 1 L3 G IPUT POWER+ OUTPUT L3 Remarks Several 120 and 180 degrees in/out phase angle configurations available Options 2,3 IPUT L3 ot connected G POWER+ OUTPUT L3 is linked to Two or three phase in/out operation modes Symmetrical or non-symmetrical input phase currents configurations Output currents are symmetrical in all modes In some configurations the total UPS module power is de-rated Options 4 and 5 have the same output current, but different power, because of different phase to phase voltage at 120 and 180 degrees phase angles Provided power and current values should be multiplied by the number of UPS modules in P+ unit, i.e. 30kVA P+ 3/3 will provide 28A*3=84A per phase

7 POWER+ VERSIOS POWER + SA Stand-alone True On-Line double-conversion UPS A stand-alone 10kVA version of the Power+ UPS, in a unique light and compact design, weighing only 21 kg. POWER + Free Style True On-line doubleconversion modular UPS for a 19 rack, 50kVA- 100kVA This is a 19 variant of the Power+ UPS, which can be inserted in any standard 19 rack, available in two configurations: 50kVA (5 Power+ modules), with a height of 20U and 100kVA (10 Power+ modules), with a height of 30U. POWER + Battery Cabinets Our new standard battery cabinet combines safety and flexibility with easy battery access. The cabinet can be ordered assembled, or in kit format to reduce shipping costs. Battery Capacity o. of Cabinets for POWER+* Dimensions (DxWxH) mm of each cabinet 32x17/20Ah 1 Pcs 243x740x x24/26/38/40Ah 1 Pcs 300x970x x65/90Ah 2 Pcs (each cabinet includes 16 batteries) 420x800x1100 *Cabinets can be installed side by side or back to back Visit our website at: w w w.g a m a t r o n i c.c o m Gamatronic Electronic Industries Ltd. Headquarters and Factory 14 Hartom St. POB 45029, Jerusalem 91450, Israel Tel: Fax: info@gamatronic.co.il Tel-Aviv Sales Office 34 Habarzel St. Ramat Hachayal, Tel Aviv Tel: Fax: Gamatronic UK Ltd. 15 Chester Road, Colmworth Business Park, Eaton Socon, Cambridgeshire, PE19 8YT, United Kingdom Tel: +44 (0) / Fax: +44(0) info@gamatronic.net March 2008