PJ Bumper Pull Equipment Trailers

Transcription

1 Brenham Bryan Navasota Sealy wctractor.com Updated 5/28/12 (SUBJECT TO CURRENT ON HAND PRICING) PJ Bumper Pull Equipment Trailers P8 Bumper Pull Trailers LED LIGHTS Powder Coat Finish 3X5 Angle Frame 14,000 lb. G.V.W.R. - 7,000 lb. x 2 G.A.W.R /16" Ball Coupler -Safety Chains - Jack (7,000 lb.) 2 Posi-lube Brake Axles (7,000 lb.) - 6 Leaf Slipper Spring Suspension " White Spoke Wheels /80R16 Radial Tires (3,520 lb.) - Electric Breakaway Kit w/ Charger - 5' Channel Ramps w/ Holder 2x3 Angle Upright - 2 7/8 Pipe Top Rail ( Can upgrade to 3 inch tubing) 5" Channel Tongue & 3" x 5" Angle Frame - 3" Channel Cross members 16" on Center Order # Model Description List Price Sale Price N X16 FT 6'11" X 16' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Black; 14,000 lb $4, $3, X16 FT 6'11" X 16' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $4, $3, N X18 FT 6'11" X 18' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; 10K Drop leg Jack; Black; 14,000 lb $4, $3, N X18 FT 6'11" X 18' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $4, $3, N X20 FT 6'11" X 20' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $4, $3, X22 FT 6'11" X 22' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $4, $3,995.00

2 6 11 X24 FT 6'11" X 24' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $5, $4, X26 FT 6'11" X 26' Bumper Pull Trailer; Upgraded to 3 Inch Tubing Ramps; Spare Tire and Mount; Black; 14,000 lb $5, $4, PJ- 235/80R16 8 Hole Radial Spare and mount; for 7,000 lb. Axle Radial LOAD RANGE E $ PJ- 10K Drop Leg Jack Heavy Duty Jack $ B5 5 Channel Buggy Hauler DRIVE OVER FENDERS LED LIGHTS 102 DECK WIDTH 7,000 lb. G.V.W.R. or 10,400 lb. G.V.W.R 2" Ball Coupler on 7K or 2 5/16 on 10,400K Safety Chains 1 - Side Wind Drop-Leg Jack (8,000 lb.) 2 - Posi-lube Axles, Idler & Brake 4 Leaf Double-eye Spring Suspension 4 - NEW 15" White Spoke Wheels 4 - NEW ST205/75R15 Radial Tires (1,820 lb.) Electric Breakaway Kit w/ Charger Rubrail & Stake Pockets; 9" High Drive Over DP Steel Fenders 5' Channel Ramps w/ Holder ;5" Channel Frame & Tongue; 3" Channel Crossmembers 24" on Center 2" Treated Pine Lumber Deck 102" Wide Deck DOT Approved Flush mount LED Lights Sealed Wire Harness Sand Blasted, Acid Washed, Powder Coated Optional 5,200 lb axle upgrade Optional dovetail with stand up or slide in ramps Optional 10K Jack Optional Spare Tire and Mount Notes: *** MAX 10,400 with Correct Options *** 18 FT 102 7,000 LB 18' Bumper Pull Trailer; 2 Coupler; lb axles with electric bakes on one; 5 Ft Slide In Ramps; Black; 7,000 lb $3, $2, FT ,400 LB 18' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; lb axles with electric bakes on one; 2 Ft Dovetail with 5 Ft Slide In Ramps; Spare Tire and Mount; Black; 10,400 lb $4, $3, FT 102 7,000 LB 20' Bumper Pull Trailer; 2 Coupler; lb axles with electric bakes on one; 5 Ft Slide In Ramps; Black; 7,000 lb $3, $3, N25394 N FT ,400 LB 20' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; lb axles with electric bakes on one; 2 Ft Dovetail with 5 Ft Slide In Ramps; Spare Tire and Mount; Black; 10,400 lb $4, $3,695.00

3 B6 6 Channel Super-Wide DRIVE OVER FENDERS Side Loading Rubrail & Ramps 14,000 lb. G.V.W.R.; 7,000 lb. x 2 G.A.W.R. 2 5/16" Ball Adjustable Coupler; Safety Chains 1 - Drop Leg Jack (10,000 lb.) 2 - Posi-lube Brake Axles (7,000 lb.) 6 Leaf Slipper Spring Suspension 4-16" White Spoke Wheels 4-235/80R16 Radial Tires (3,520 lb.) Electric Breakaway Kit w/ Charger 5' Channel Ramps w/ Holder Rear Trailer Support Jacks 6" Channel Frame & Tongue; 3" Channel Crossmembers 16" on Center; 2" Treated Pine Lumber Deck 102 Wide Deck Sealed Wire Harness w/ 7- Way RV Plug Sand Blasted, Acid Washed, Powder Coated 4,000 lbs Rated Drive-over fenders Rubrail w/stake Pockets Expaned Metal Chain Tray DOT Approved Flushmount Lifetime LED Lights 16 FT ' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; and Mount; Black; 14,000 lb $6, $4, FT ' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; and Mount; Black; 14,000 lb $6, $4, FT ' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; and Mount; Black; 14,000 lb $6, $4, FT ' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; and Mount; Black; 14,000 lb $6, $5, FT ' Bumper Pull Trailer; 2 5/16 Adjustable Coupler; and Mount; Black; 14,000 lb $6, $5,195.00

4 Receiver Hitch 8 I-Beam Gooseneck (CC) 2' Dovetail w/ 5' Slide-in Ramps 16 FT 102 GN 16' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; Black; 14,000 lb $6, $5, FT 102 GN 18' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; Black; 14,000 lb $6, $5, FT 102 GN 20' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; Black; 14,000 lb $6, $5, FT 102 GN 22' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; Black; 14,000 lb $6, $5, FT 102 GN 24' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; Black; 14,000 lb $7, $5, N FT 102 GN 24' Gooseneck Trailer; lb axles with electric Spare Tire and Mount; 3 Sets of D-Rings; Rear Receiver Hitch; Black; 14,000 lb $7, $5, Other Options Cold Weather Wiring Harness (7-Way RV); 2nd Jack (Bumper Pull);Plate for Winch; 6" Taller GN Riser; Douglas Fir Lumber; ¼" Diamond Plate Steel Floor ²; 12"oc Crossmembers; 1 Pair D-Rings; Rough Oak Floor; Receiver Hitch; Goodyear 14 Ply Tire (MUST ADD TO REG 14 PLY COST); 2 3/8" Removable Pipetop on Siderails; 11ga Diamond Plate Steel Floor & 4 D-Rings; Front Toolbox (Bumper Pull); Mount Only for Spare Tire Spare Tire and Mount (Bumper Pull); Deck on the Neck (GN Only); Rear Trailer Support Jacks; Winch 12VDC (12,000 lb.) Incl. Front Toolbox; 2-speed Jack (12,000 lb.)

5 B8 8 Channel Super-Wide DRIVE OVER FENDERS 102 DECK WIDTH 14,000 lb. G.V.W.R.; 7,000 lb. x 2 G.A.W.R. 2 5/16" Ball A-Frame Coupler; Safety Chains 1 - Drop Leg Jack (10,000 lb.) 2 on Gooseneck 2 - Posi-lube Brake Axles (7,000 lb.) 6 Leaf Slipper Spring Suspension 4-16" White Spoke Wheels 4-235/80R16 Radial Tires (3,520 lb.) Stake Pockets Electric Breakaway Kit w/ Charger 5' Channel Ramps w/ Holder; Rear Trailer Support Stands Front Toolbox (GN Only); 8" Channel Frame & Tongue; 2 or 4 Ft dovetails 3" Channel Crossmembers 16" on Center; 2" Treated Pine Lumber Deck DOT Approved Flushmount Lifetime LED Lights Sealed Wire Harness w/ 7-Way RV Plug Sand Blasted, Acid Washed, Powder Coated Expanded Metal Chain Tray (Bumper Pull) 8 Inch Wrapped Channel Tongue 15,680 G.V.W.R. on Gooseneck Models Can be special ordered as a bumper pull trailer with 14,000 lb. Can be ordered with third axle for Hot Shot work and other special applications ( Min 20ft) 20 FT 102 GN 20' Gooseneck Trailer; lb axles with electric $6, $6, FT 102 GN 24' Gooseneck Trailer; lb axles with electric $8, $6, FT 102 GN 26' Gooseneck Trailer; lb axles with electric $8, $6,795.00

6 28 FT 102 GN 28' Gooseneck Trailer; lb axles with electric $8, $6, FT 102 GN 30' Gooseneck Trailer; lb axles with electric $8, $7, N FT 102 GN 14 ply 30' Gooseneck Trailer; lb axles with electric Ramps; 14 Ply Tires; Spare Tire and Mount; Black; 15,680 lb $9, $7, Can be special ordered up to 44 Feet in length in 2 foot increments. Other Options Cold Weather Wiring Harness (7-Way RV); 2nd Jack (Bumper Pull);Plate for Winch; 6" Taller GN Riser; Douglas Fir Lumber; ¼" Diamond Plate Steel Floor ²; 12"oc Crossmembers; 1 Pair D-Rings; Rough Oak Floor; Receiver Hitch; Goodyear 14 Ply Tire (MUST ADD TO REG 14 PLY COST); 2 3/8" Removable Pipetop on Siderails; 11ga Diamond Plate Steel Floor & 4 D-Rings; Front Toolbox (Bumper Pull); Mount Only for Spare Tire; Spare Tire and Mount (Bumper Pull); Deck on the Neck (GN Only); Rear Trailer Support Jacks; Winch 12VDC (12,000 lb.) Incl. Front Toolbox; 2-speed Jack (12,000 lb.) Stake Pocket D-rings Ever wish you could move your d-rings to different positions around your trailer depending on what you were hauling? If so, our stake pocket d-rings make a great addition to any PJ Trailer with our 3 3/4" inside diameter stake pockets. You can simply slide the formed d-ring channel inside the stake pocket and insert the hitch pin. Fits PJ 3 3/4" ID Stake Pockets D-ring rated at 11,780 lbs Can be moved in seconds with no tools Black Powder Coat Finish Includes hitch pin Not for use on dump trailer stake pockets $29.95 each