SPECIAL EDITION PET STROLLER PG8250

Transcription

1 For The ON-THE-GO Pet INSTRUCTION MANUAL SPECIAL EDITION PET STROLLER PG8250 Interior Dimensions: 26"L x 12"W x 19.5"H To see our full line of products, visit us online at: CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free Eastern Standard Time 8am-3pm, Monday through Friday

2 PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Front Wheel Assembly 2-Rear Wheels Rear Axle Assembly Stroller Back Tray 2-Washers 2-Cotter Pins 2-Hub Caps OPENING THE STROLLER Step 1. Release locking latch Step 2. Unfold as shown. Make sure both locks snap into place. Latch 2 SPECIAL EDITION PET STROLLER PG8250

3 TO ASSEMBLE FRONT WHEELS Step 1. Turn stroller over as shown. Step 2. Push wheel assembly onto stroller leg until it snaps into place. Step 3. Repeat for other wheel. Tug firmly on each wheel assembly to be sure wheels are securely in place. Note Direction of Arrow NOTE: To remove, squeeze tab and pull wheel off. TO ASSEMBLE REAR WHEELS Step 1. Slide wheel assembly onto axle. Step 2. Slide washer onto axle. Step 3. Fit straight part of cotter pin through hole on axle. SPECIAL EDITION PET STROLLER PG8250 3

4 TO ASSEMBLE REAR WHEELS Step 4. Line up each of the tabs in the hub cap with the slots in the wheel, snap hub cap into place. Step 5. Repeat for other side. TO ASSEMBLE REAR AXLE TO FRAME Step 1. Turn stroller over. Step 2. Position rear axle assembly as shown. Step 3. Push rear axle onto frame until it clicks and locks into place on both sides. NOTE: Pull down firmly on the brackets to be sure they are securely attached to the stroller s rear legs. TO ASSEMBLE BACK TRAY Step 1. To assemble the back tray, first align a hole on one side of the tray with one of the bolts on the handle of the same side of the stroller. Step 2. Snap one side of the tray over the bolt on the handle then repeat for the other side. 4 SPECIAL EDITION PET STROLLER PG8250

5 TO USE FRONT WHEEL LOCKING MECHANISM Step 1. To engage the front wheel locking mechanism so that the front wheel does not swivel, (best when the stroller is used for fast walking or running), pull tab up. Step 2. To disengage the locking mechanism so that the front wheel swivels (for easy steering) push tab down. Unlock Lock APPLYING THE BRAKES Step 1. Push levers on both rear wheels down to lock. Step 2. Pull levers up to unlock. WARNING: Never leave your stroller parked without applying brakes. Unlock Lock FOLDING THE STROLLER Step 1. NOTE: Before folding the stroller, unzip stroller, and open the canopy. C. Step 2. Slide second frame lock release (C) to the right, while squeezing the main frame lock release (D) rotate the folding mechanism almost 180 degrees forward until stroller releases and handle is lowered. SLIDE TO RIGHT SPECIAL EDITION PET STROLLER PG8250 5

6 FOLDING THE STROLLER C. D. SLIDE TO RIGHT AND ROTATE 180 DEGREES FORWARD WHILE SQUEEZING MAIN FRAME (D) LOCK RELEASE LOOKING AFTER YOUR STROLLER Always store product in a clean, dry place. Not recommended for use on the beach. Do not put heavy items on top of the stroller. Clean frame by wiping with a lightly oiled cloth. Do not use detergent or abrasives. Spot clean fabric with dry cleaning fluid or mild soap and warm water. To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and swivels), keep all moving parts clean and lubricated with WD40 or light machine oil. NOTE: Do not lubricate brake components or swivel locks. Regularly check stroller for loose parts. These should be tightened or replaced. WHEEL MAINTENANCE To clean and lubricate front and rear wheels, push out locking lever under wheel housing to release rear wheel. To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts clean and lubricated with WD40 or light machine oil. Push wheel sets back on until they click and lock in position; pull on wheel housings to ensure they are secure. Push stroller back and forth and rotate swivels around to work in lubricant. Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean off with warm water and dry thoroughly. NOTE: Do not lubricate brake components or swivel locks. 6 SPECIAL EDITION PET STROLLER PG8250

7 WARNING! FOR PETS ONLY. Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death. Do not carry additional bags, goods, or accessories in or on stroller except as recommended in the manufacturer s instructions. Recommended use of an approved safety restraint correctly fitted and adjusted. Do not leave pet unsupervised in stroller. Before making adjustments to stroller ensure that pet s body is clear of any moving parts. This stroller is designed for one pet only. Do not hang bags from handles as this may cause the product to become unstable. Do not use on escalator or stairs; fold stroller and carry. Put on brake whenever you park the stroller. Ensure stroller is completely erected and check that all locks are engaged before placing pet in stroller. Do not overload as stroller may become unstable; maximum weight of pet using this stroller not to exceed 45 lbs. Any goods carried in the basket not to exceed 6 lbs. REPLACEMENT PARTS Use only PET GEAR replacement parts. Please have your model number ready before calling. You can also request parts: Sheldon Avenue West Rutland, VT SPECIAL EDITION PET STROLLER PG8250 7