CORONA MILLWORKS. D r a w e r B o x e s. Dovetail. Dowel. Finger Joint. Scooped Fronts. Notch & Drill. Lipped Fronts. Angled Sides
|
|
- Robyn Murphy
- 7 years ago
- Views:
Transcription
1 CORONA MILLWORKS D r a w e r B o x e s Dovetail Dowel Finger Joint Scooped Fronts Notch & Drill Lipped Fronts Angled Sides
2 Material Selection Sides: Finished 1/2" or 5/8" - 9 Ply Birch 1/2" 9 Ply Maple 1/2" 5 Ply Maple * 1/2" CM Birch 1/2" or 5/8" - Soft Maple 1/2" or 5/8" - Select White Maple 1/2" or 5/8" - Aspen 1/2" or 5/8" - Cherry 1/2" or 5/8" - Alder 1/2" or 5/8" - Beech 1/2" or 5/8" - Red Oak All solid material is finished after assembly For all other materials, please call for availability. Unfinished 1/2" or 5/8" - 9 Ply Birch 1/2" 9 Ply Maple 1/2" or 5/8" - Soft Maple 1/2" or 5/8" - Select White Maple 1/2" or 5/8" - Aspen 1/2" or 5/8" - Cherry 1/2" or 5/8" - Alder 1/2" or 5/8" - Beech 1/2" or 5/8" - Red Oak Melamine 1/2" or 5/8" - White Melamine* 1/2" - Maple Melamine* 1/2" - Black Melamine* 1/2" - White Melamine w/ MDF core Bottoms: 1/4" Maple (finished & unfinished) 1/2" Maple (finished & unfinished) 1/4" Birch (finished & unfinished) 1/2" Birch (finished & unfinished) 1/4" White Melamine 1/2" White Melamine 1/4" Maple Melamine 1/2" Maple Melamine * Only available in doweled construction Top Edge : Bullnose Square Square Flush Top Finish : Clear Foil PVC Tape Wood Tape
3 Options Dovetail Dowel Integrated drawer front French Dovetail (Foil drawer fronts optional) Finger Joint Alternative Dovetail Through Dovetail Notch, Drill & Clips (Avail. for: Blum, Accuride, Grass, Hettich, and Corona) Integrated Lipped Front Angled Sides (Scoops optional) Scallop Sides (Scoops optional)
4 Scoops Scoops Details: 3" x 1" (6) Scoops Available Scoops are centered on front of drawer box (1) 2 1/4" x 1 1/8" (2) 4 1/8" x 1" (3) 4" x 1" (4) 3 3/4" x 1 3/4" (5) 4 3/4" x 1 3/8" (6)
5 File Boxes Standard Files The slots for files are placed on the front and back of the drawer box making the bars run the depth of the drawer. Minimum inside height is 9 3/8" Minimum width inside is 13 1/4" (letter) Minimum width inside is 16 1/4" (legal) Lateral Files The slots for files are placed on the sides of the drawer box making the bars run the width of the drawer box. Minimum inside height is 9 3/8" Minimum depth inside is 13 1/4" (letter) Minimum depth inside is 16 1/4" (legal) Basic Information Available Dovetailed or Doweled Bars are optional and must be specified Slots for Bars are 1/8" wide and 1" high Both options include letter and legal file slots File slots are generally located 3/8 from sides/back or front of drawer
6 Laser logos Laser Engraved Drawer Boxes Give the lasting impression of a completely custom drawer box by leaving a signature of your craftmanship with your company s logo. Drawer boxes can be uniquely created with different material options. 1 /2 YOUR LOGO HERE 2 Submitting files: to: generalmail@coronamillworks.com attention: Logo Engraving Supported Formats: JPG / TIF / EPS / AI PDF (high quality) Hard Copy Artwork
7 Spice Pull-Out Available in Dovetail Can be ordered in any material Available in unfinished or prefinished Easy installation with sidemount or undermount slides Customized to fit your available space Maximum height is 21" Middle shelf is adjustable and removable Each shelf s bottom is recessed 1/2" Top & Bottom shelf is 3" high with a 1 1/2" high middle shelf Spice Drawer Available Dovetailed or Doweled Can be ordered in any material Inserts are a combination of 1/2" fronts with 1/4" bottoms in prefinished maple ply Inserts can purchased seperatly in 48" long strips or installed in your drawer box Quantity of inserts for your drawer box will depend on depth of drawer box Our suggested height is 3 1/2" but can be customized Perfect solution for organizing your spices or any of your personal accessories
8 Silverware & Utensil Inserts Available dovetailed or doweled Four configurations from which to choose You may order inserts as removable or have them installed Inserts are 3/8" thick and 1 1/2" tall in prefinished maple *all demenisions given are the inside demensions* Silverware Insert Options: Options A Options B Options C Options D Min. interior width: Min. interior depth: Min. interior width: Min. interior depth: Min. interior width: Min. interior depth: Min. interior width: Min. interior depth: Utensil Insert Options: Option E Option F Option G 8.125? *all demenisions given are the inside demensions* Min. interior width: Min. interior depth: Min. interior width: Min. interior depth: Min. interior width: Min. interior depth:
9 Corner Box Available in Dowled or Nailed Construction 5/8" and 3/4" thick can be nailed or doweled 1/2" thick is only availble in the nailed construction Dividers are included as standard and are removable. (Please specify vertical or horizontal dividers) Depth will be measured from front of side to end of side. (Triangular extension is not included in depth measurement) Notch & Drill for undermount slides is available Under Sink Storage Available in Dovetail Wood species available in 9 Ply Birch or 9 Ply Maple Top and bottom shelf are 3" high Overall standard height is 12" but it can be customized Can be installed using sidemount or undermount drawer slides Width and depths can be ordered to your specifications Bottoms are recessed 1/2" Can be used for both kitchen and bath applications
10 Wine Boxes Single Wine Box Available Dovetailed or Doweled Available in any standard wood species Single wine boxes are 15(W) x 12(D) x 15(H) Double wine boxes are 15(W) x 12(D) x 30(H) Double Wine Box Single Bottle Wine Box Perfect for an end of the project gift to show your customer your appreciation Customize it with your company logo and leave a lasting impression Laser logo must be approved prior to order Finger Joint Wine Box has a swing open front Dovetail Wine Box has a slide up door Available in any standard wood species * wine not included * Finger Joint Wine box Dovetail Wine Box
11 Corona Drawer Slides Notch & Drill for Corona Slides Drawer Slides available in 15,18, and 21 Concealed Undermount Full Extension Max static capacity: 100lbs Max dynamic capacity: 75lbs Soft close Undermount Concealed Drawer Slides Specifications inside cabinet width 6mm (1/4") min. top clearance use 32mm system or #7 mounting screws drawer width 37mm (1-7/16") 21mm (13/16") drawer side thickness maximum 16mm (5/8") drawer height max = opening height. minus 20mm (13/16") opening height. 7mm (9/32") Ø7 x 11mm (7/16") bore for hook 11mm (7/16") 13mm (1/2") bottom recess drawer front specifications 14mm (9/16") bottom clearance 33mm (1-5/16") drawer back specifications For Solid Material Only 31mm (1-1/4") Outside Drawer Width = Drawer Opening - Subtraction Factor Drawer Side Thickness Subtraction Factor 16mm (5/8") 10mm (3/8") 15mm (19/32") 12mm (15/32") 14mm (9/16") 14mm (9/16") 13mm (1/2") 16mm (5/8") 12mm (15/32") 18mm (23/32") To calculate Outside Drawer Width, first determine Drawer Opening size and Drawer Side Thickness. Use Thickness to lookup Subtraction Factor on chart above. Then simply subtract Substraction Factor from Drawer Opening size. 2.5mm (3/32") 13mm (1/2") 55.5mm (2-3/32") spacer: When using 1/2" drawer stock and a Topslide clip, a 1/8" spacer must be applied to the front (between clip and drawer). 6mm (1/4") For example if you have an 18 Drawer Opening with a Side Thickness of 5/8", the Subtraction Factor is 3/8". So in this case to calculate the outside drawer width the formula is: 18" - 3/8" = 17-5/8"
12 ORDERS / Fax: Online orders and information: Cabinet Doors & Drawer Boxes 5572 Edison Ave, Chino CA CMDB08
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationWine Rack & Glass Storage Bench Chris Gardner
Wine Rack & Glass Storage Bench Chris Gardner Quantity Length Width Material Part 2 48 16 3/4 birch plywood top, bottom 2 14 16 3/4 birch plywood sides 2 14 13 3/4 birch plywood support dividers 2 3 15
More informationGreat Beginnings. Merillat Essentials
Great Beginnings. Merillat Essentials Sensibility+you. Where it all begins. The start of a meal. The core of the home. The center of life. The kitchen brings together all of the elements of life, and Merillat
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationKitchen planning guide.
Kitchen planning guide. Your kitchen plan. This guide is meant to help you start planning your new kitchen. Once completed, you can save, print or email the document to your designer or dealer as the first
More informationDIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
More informationExtraordinary Form. Incomparable Value.
Extraordinary Form. Incomparable Value. Dovetail Grooved Cinnamon Glaze beam Wellington Series: Full overlay birch raised door with mortise & tenon construction Applied moulding and five piece recessed
More informationDESK CABINETS & BOOKSHELVES
142 : Desk Base Desk Base Cabinets File Drawer Base Cabinet Desk Base Cabinet 1 Factory Installed Wastebasket FDB1821 DWBT1821 Desk Base cabinets are 12 to 24 wide, 28 1 2 high and 20 3 4 or 24 deep. Cathedral
More informationLuxor 3 & 4. Luxor 4. Luxor 3. Model no. 718 Pyrmont cherry repro. Model no. 721 Pyrmont cherry repro. Model no. 722 Golden maple repro.
Luxor & 4 Luxor Luxor 4 Model no. 718 Pyrmont cherry repro. Model no. 721 Pyrmont cherry repro. Model no. 719 Golden maple repro. Model no. 722 Golden maple repro. Model no. 720 Light ash repro. Model
More informationSTORAGE & CONVENIENCE
Wood Bottle Rack Sold by the pair (front & back pcs) BTLRK-24MAPLE Bottle Rack 3/4 T X 24 W X 2 H 1 Wood Wine Bottle Lattice Sold by the pair (front & back pcs) WR17X36-PRMAPLE Wine Lattice 7/8 T X 17
More informationFor video visit: rev-a-shelf.com/videos FRONT. 15 in (381 mm)
180 How do you make more room in a confined space like a wall cabinet? Or how do you use all the space in your cabinet when you can t reach the shelves? Answer - Add Rev-A-Shelf Wall Accessories. Our classic
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationVanity Cabinets. Width Height Depth. 12 to 60 31 1 8 to 84 18 to 20 3 4 (Reduced Depth optional on select cabinets)
147 Dimensions Width Height Depth 12 to 60 31 1 8 to 84 18 to 20 3 4 (Reduced Depth optional on select cabinets) SKU Coding VSB 36 BUTT Cabinet Type width in inches Door Type (e.g., VSB=) Construction
More informationKITCHENS. Tip PAGE 1 FITTING YOUR KITCHEN GUIDE. How to mark out a kitchen. Tools required for installing a kitchen STEP ONE STEP TWO STEP THREE
FITTING YOUR KITCHEN GUIDE How to mark out a kitchen PAGE 1 Before starting on the installation, measure 870mm from the lowest point of the floor and mark a datum line around the room to indicate where
More informationStorage Bins U-BILD. Plan No. 797 A MERICA' S FAVORITE WOODWORKING P LANS. Bill of Material. Cutting Schedule
U-ILD A MERICA' S FAVORITE WOODWORKING P LANS Storage ins Plan No. 797 Copyright U-uild, Inc., 2004. All rights reserved. Printed in the U.S.A. A true country classic, this build-it-yourself storage bin
More informationprez28@comcast.net Legacy Cabinet Catalog
2013 prez28@comcast.net Legacy Cabinet Catalog 2013 Cabinet Catalog 2 Below is our sample 10x10 Kitchen, the price examples listed on the following pages are in reference to the following layout and cabinet
More informationQuality alu LED profiles
Quality alu LED LED PROFILES - PRODCUT CATALOGUE 2010 Quality Aluminum LED Manufacturer & Designer NEW RECESSED SLIM LINE 15mm Introduction: It is recessed type of the aluminum LED profile to build into
More informationIn Stock Selection. Interior Doors
Scherer Bros. Lumber Co. Millwork Solutions Doors In Stock Selection Raised Panel Doors The style and warmth of fine wood make statements of quality and traditional elegance. Scherer Bros. carries the
More informationArchitectural Casework 06400-01. 1.01 Description of Work
06400-01 1.01 Description of Work A. Extent of each type of architectural millwork and casework as indicated on drawings. Types of architectural casework shall include both stained and plastic laminated
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Through-the-Wall Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More information1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.
Page 1 of 9 ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please
More informationHOW TO INSTALL A BEAUTIFUL NEW KITCHEN
HOW TO INSTALL A BEAUTIFUL NEW KITCHEN Easy to follow step-by-step kitchen cabinet installation TOOL AND MATERIAL LIST Hammer Pry bar Screwdriver Phillips Flathead Level Tape measure Pencil Straight edge
More informationDelivery Split delivery Off Hr delivery Store off site To tailgate To floor Accepted by
ARCHITECTURAL WOODWORK QUALITY STANDARDS SPECCHEK INSERT MODULAR CABINETS AWI Grades Transparent Fin. Opaque Fin. Laminate clad By room By floor By item Size Width Height Thickness Construction Flush overlay
More information2. The Laboratory Fume Hood Specification Catalog Select the style and size hoods appropriate for your layout and laboratory use.
TABLE OF CONTENTS How to Specify... 3 Introduction to Fisher Hamilton Stainless Steel Laboratory Casework... 4 5 Stainless Steel Casework Options Menu... 6 Base Cabinets... 7 17 Sitting Height Cabinets...
More informationHow you select and where to install me! Kitchen BE CAREFUL OF FOLLOWING PARAMETERS : A- Plumbing space needed (specifically the height).
Environment, recycling, selective collect Today, to convert a house to recycling, a house should have necessary methods and tools. Richelieu, always ahead of practical solutions, offers management and
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationAVENTOS HF Bi-fold lift system
AVENTOS HF Bi-fold lift system Perfecting motion AVENTOS HF Table of contents Overview Page 2-4 Features 5-6 Using this catalog 7-8 Wood or wide frame aluminum door - face frame application 9-10 Blum,
More informationCONTEMPORARY - TRANSITIONAL RECEPTION STATIONS
Reception stations, the first impression expressed to visitors in your office. Transitional styling to coordinate with your other office settings, available in a selection of 16 walnut, cherry, oak, maple
More informationDesk Cabinets & Bookshelves
125 Desk Cabinets & Book Dimensions SKU Coding Width Height Depth 12 to 36 28 1 2 to 96 12 to 24 (Reduced Depth optional on select cabinets) DDO 18 21 Cabinet Type width depth (e.g., DDO= in inches in
More informationThe runner is available in two versions: - fixed to the drawer by locating pin (see page 20) - fixed to the drawer by clip (see page 22)
2 3 The Unica full extension concealed runner combines Smove decelerated closing action with both traditional opening and Push self-opening for handle-less furniture. The fully integrated operating system
More informationNEW. Teramo See Page 136
Basin NEW Teramo See Page 136 134 (INCLUDING COUNTERTOP BASINS) Looking for the perfect storage solution With the average bathroom getting smaller and more minimalistic in styling, bathroom furniture provides
More informationBase Cabinet with Self-storing Folding Doors and Floor
Usable Kitchens When designing a kitchen for use by persons with mobility impairments, especially those who use wheelchairs, careful layout of the kitchen is crucial to maintaining accessibility. People
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationStair Parts Installation. Tricks
Stair Parts Installation Tips & Tricks Introduction Your DIY staircase guide Welcome to the Stairpart home installation guide. Your stairway is both a functional and focal point in your home, so keeping
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationCabinetry Installation
Cabinetry Installation INTALLATION EQUIPMENT #8 x 2 1 2 screws #8 x 2 1 2 washer head screws Variable speed drill, electric or cordless Extension cord Countersink drill bit Drill bits, 3/16 and 1/4 Assorted
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationCoat Racks Floor Racks Hooks Hangers Hook Panels Wardrobes
Coat Racks Floor Racks Hooks Hangers Hook s Wardrobes Phone: 913-281-4555 Fax: 913-281-4554 Website: www.emcospi.com E-mail: info@emcospi.com Aluminum & Hardwood Coat Racks Whenever large groups gather
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationIntexma Graphics (Pty) Ltd
Intexma Graphics (Pty) Ltd Distributors for the complete supply of signage materials comprising of single and double roll up stands, banner walls, point of sale tables, signage boards and light boxes.
More informationComplete Dovetail Jig Instructions
Complete Dovetail Jig Instructions 18 15 1 12 13 8 (22818) 19 17 16 4 3 6 14 5 9 9 11 10 2 PARTS LIST - COMPLETE DOVETAIL JIG Introduction Your new dovetail jig will cut Full Through Dovetails and three
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationCNC Tool Storage Solutions
Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationGarage Workbench Plans
www.bobsplans.com Garage Workbench Plans Every home woodworker knows the importance of making efficient use of the available space in his or her shop. This workbench is designed to provide the maximum
More informationFF+E Package 1: Casegoods Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1
FF+E Package 1: Casegoods Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 Issue Date: 3/3/2009 Each furniture item scheduled in this specification manual is assigned a "key" code; each key code is crossreferenced
More informationCurved Quadrant Instruction Manual
Curved Quadrant Instruction Manual Consumer Guarantee - Please make sure the purchaser/end user completes and returns the Guarantee card which is enclosed with this product. Failure to validate the Guarantee
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationSTORAGE DESIGN LIMITED
Cupboards Cubio have a huge capacity and are available in two types. Standard duty storage are designed to allow organised storage of parts and tools in a range of plastic bins on adjustable shelves. Heavy
More informationREFRIGERATION. Standard Features & Accessories. Model Options. Built-In 30 W. Full-Height Wine Cellar. All models include. VCWB300 Professional
Standard Features & Accessories All models include Capacity accommodates up to 150 full-size bottles o 84 H./24 D. Exclusive TriTemp storage system o Three independent temperature zones o Settings are
More informationLAND OF DISPLAYS PASSPORT TO ENDLESS DISPLAY SOLUTIONS
LAND OF DISPLAYS PASSPORT TO ENDLESS DISPLAY SOLUTIONS 1 WELCOME TO THE LAND OF DISPLAYS You are now holding the passport providing you with information about the range of CROWN - Premium Displays. CROWN
More informationUltimate soft closing in any application: Silent System for Intermat hinges
Ultimate soft closing in any application: Silent System for Intermat hinges Ultimate soft closing in any application: Silent System for Intermat hinges 2 Intermat provides a broad product lineup for all
More informationINSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
BATH SINKS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Caution: All installation types need to allow room for faucet installation. Ensure adequate clearance behind the basin for your faucet and
More informationELECTRIC CONVECTION BUILT-IN OVEN
ENGLISH ESPAÑOL FRANÇAIS INSTALLATION MANUAL ELECTRIC CONVECTION BUILT-IN OVEN Please read these instructions thoroughly before installing and operating the oven. LWS3081ST LWD3081ST LSWS305ST LSWD305ST
More informationImportant Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationPROJECT PLAN. Stackable shelves
PROJECT PLAN Stackable shelves This article originally appeared in The Family Handyman magazine. For subscription information, visit www.familyhandyman.com Please note that pages that appeared in the magazine
More informationDomain. US Price List
Domain US Price List Functional shelf Widths: 30, 45, 60, 72, 75, 78, 84, 90, 96 Depth: 15 3/4 Open box as shelf Height: 15 3/4 Depth: 15 3/4 Widths: 12, 15, 18, 24, 30 Open box for power entry Height:
More informationVauth-Sagel Kitchen Storage systems. Kitchen Storage Systems. > Innovative and Functional Storage Systems
Vauth-Sagel Kitchen Storage systems Kitchen Storage Systems > Innovative and Functional Storage Systems VAUTH-SAGEL engineered quality & innovations Vauth-Sagel is a valued development partner within the
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationChapter 3 Installing Over-the-Post Railing on an L-Shaped Stair
49 Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair In this chapter: The Over-the-Post Balustrade System Determining the Rail Centerline Using Rail Bolts Making a Pitch Block Laying Out
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationTRADITIONAL RECEPTION STATIONS
TRADITIONAL Reception stations, the first impression expressed to visitors in your office. Traditional styling to coordinate with your other office settings, available in a selection of 15 walnut, cherry,
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationStandard boxes plus stock moldings can transform any kitchen from dull and dreary to dazzling and delightful
Standard boxes plus stock moldings can transform any kitchen from dull and dreary to dazzling and delightful Furniture feet Souped-Up I ve been a builder for more than 25 years, and one of my favorite
More informationINSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More information2.9 WINDOW & DOOR BUCKS
2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place
More informationInstallation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
More informationHorizontal Mini Blinds Installation Guide
Horizontal Mini Blinds Installation Guide We make it easy! BTG 468298 EN_ rev0614 For more safety information: 1-866-662-0666 or.www.healthcanada.gc.ca/blindcords Before starting Your new Blinds To Go
More informationKitchen & Bath Measurements Guide
Kitchen & Bath Measurements Guide High End design without High End pricing Kitchen & Bath Measurement Guide ABOUT US Interstock Premium Cabinetry (IPC) is a manufacturer and importer of kitchen cabinets
More informationWall installation for Samsung Galaxy
1 Scope of delivery... 02 2 Mounting... 03 2.1 Mounting preparation table of contents 2.2 Mounting on cavity walls / lightweight walls... 04 2.2.1 Wall notch 2.2.2 Angles 2.2.3 Insert the lower case 2.2.4
More information<Subhead> Your Simple, Step-By-Step Guide for Replacing or Upgrading Kitchen Cabinets
HD Supply, Inc. Kitchen Cabinet Brochure Copy: Denny Bulcao, Jr. (Posted with the written consent of HD Supply, Inc.) Front Cover: Kitchen Cabinets Guide Your Simple, Step-By-Step
More informationEggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art
D O O R F R A M E S Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers Industries
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationAMF112 Instruction Manual
AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationSHELVES. www.tedswoodworking.com
SHELVES It's rare that bookshelves look as interesting as the objects you display on them. After all, how much can you decorate the edges of your shelves and sides? This unit is unusual because the shelves
More informationThe tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationInterior Pocket Door System. A hiding gliding sliding door
Interior Pocket Door System hiding gliding sliding door Introduction good fit for you & the room too Our range of Whatever the style or budget we ve got a choice of 3 sliding pocket door systems that will
More informationSuperform Products Ltd.
TYPICAL CORNER REINFORCING NOTE : SEE ENGINEERED REBAR SCHEDULES SUPPLIED BY THE MANUFACTURER STEEL REINFORCEMENT WALL CORNER 90 Copyright 2012 Sept. 2012 5.1.1 Rebar Spacing 6" 12" Max. Load LB./FT. 2000
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationBuilding on a Legacy of Enduring Partnerships. www.marshfurniture.com
Building on a Legacy of Enduring Partnerships Julius Everett Marsh, Sr. Reid Marsh, Jim Marsh Sr., Mollie Marsh Brugh Mollie Marsh Brugh In 1906, Julius Everett Marsh, Sr. founded Marsh Furniture Company.
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationSliding Barn Door Hardware Installation Instructions BALDUR and ODEN
Sliding Barn Door Hardware Installation Instructions BALDUR and ODEN Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview
More informationECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
More informationFLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction... 2 Components... 3 Step 1 Marking out the Perimeter of the Carport... 3 Step 2a Footing Set-Out for Concrete Block Pad
More informationARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84" Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors
Drawing Board Storage, Open Drawing Board Storage, Doors Drawing Board Storage Notebook Storage, Open 1670 D : 23.25" holds 32 drawing boards 1 shelf, adjustable on 1¼" increments maximum board height
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More information