Two- and three way valves VFG.. / VFGS 2 / VFU.. for thermostats and electrical actuators
|
|
|
- Benjamin Harrell
- 7 years ago
- Views:
Transcription
1 for thermostats and electrical actuators Description VFG 2 VFG 21 (see pages 2, 3, 4) VFGS 2 (see pages 5, 6) Valves for heating, district heating and cooling systems. The valves can be used with following actuators: Thermostats AFT.. Actuators AMV(E) 655, 658, 659 (from Q4 2014) Main data: DN T max 200 C 2-way valve (Normaly Open) Medium: circulation water and glycolic water up to 30% Cone: VFG 2 metal/metal sealing VFG 21 soft sealing Pressure relieved Main data: DN T max 350 C 2-way valve (Normaly Open) Medium: steam Cone: metal/metal sealing Pressure relieved VFG 33 (see pages 6, 7) Main data: DN T max 350 C Medium: circulation water and glycolic water up to 30% mixing pressure balanced valve Cone: metal/metal sealing VFU 2 (see page 7, 8) Main data: DN T max 200 C 2-way valve (Normaly Close) Medium: circulation water and glycolic water up to 30% Cone: metal/metal sealing Pressure relieved DEN-SMT/SI VD.AA.N9.02 Danfoss 10/2014 1
2 Ordering (VFG Cone: metal /metal sealing, pressure relieved. Picture DN k VS T max Code No. (mm) (m 3 /h) ( C) PN 16 PN 25 PN ,0 065B B B ,3 065B B B ,0 065B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B2426 Technical data (VFG Nominal diameter DN k VS value (m 3 /h) 4 6, z value acc. to VDMA ,6 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,4 0,35 0,3 0,2 0,2 (bar) PN AFT PN 25, (bar) PN AMV(E) 655, 658, 659 (from Q4 2014) 4) PN 25, Nominal pressure PN 16, 25 or 40, flanges to EN Flow medium/temperature Circulation water / Glycolic water up to 30% / thermo oil / C Pressure balance Valve body material PN 16 PN 25 Stainless steel bellow, mat. No Grey cast iron EN-GJ-250 (GG-25) Ductile iron EN-GJS T (GGG-40. PN 40 Cast steel GP240GH (GS-C 25) Rolling diaphragm Cone material Stainless steel, mat. No mat. No Seat material Stainless steel, mat. No mat. No In combination with actuators AMV(E), k VS values are higher if Y60 piece is removed from valve. Above operating pressure of 14 bar use of valve stem extension ZF4, ZF6 or combination piece KF2 is necessary. In order the actuator can close at max differential pressure flow velocity musn t exceed 2 m/s. 4) With adapter: 065B3525: DN B3526: DN B3527: DN VD.AA.N9.02 Danfoss 10/2014 DEN-SMT/SI
3 Design (VFG 1. Valve body 2. Valve seat 3. Bellows 4. Valve insert 5. Diaphragm 6. Valve body extension 7. Shut off valve for water filling 8. Closing plug VFG 2 DN VFG 2 DN VFG 2 DN , T max 200 C Ordering (VFG 2 Cone: soft sealing, pressure relieved. Picture DN k VS T max Code No. (mm) (m 3 /h) ( C) PN ,0 065B ,3 065B ,0 065B B B B B B B B B B B2514 DEN-SMT/SI VD.AA.N9.02 Danfoss 10/2014 3
4 Technical data (VFG 2 Nominal diameter DN DN k VS value (m 3 /h) 4 6, z value acc. to VDMA ,6 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,4 0,35 0,3 0,2 0,2 (bar) PN PN (bar) AMV(E) 655, 658, 659 (from Q4 2014) 4) PN Nominal pressure PN 16 or 25, flanges to EN Flow medium/temperature Circulation water / Glycolic water up to 30% / C (DN ), C (DN ) Pressure balance Stainless steel bellow, mat. No Rolling diaphragm Valve body material PN 16 Grey cast iron EN-GJ-250 (GG-25) PN 25 Ductile iron EN-GJS T (GGG-40. Cone material Stainless steel, mat. No mat. No Seat material Stainless steel, mat. No mat. No Conical seal EPDM in combination with actuators AMV(E), k VS values are higher if Y60 piece is removed from valve. above operating pressure of 14 bar use of valve stem extension ZF4, ZF6 or combination piece KF2 is necessary. In order the actuator can close at max differential pressure flow velocity musn t exceed 2 m/s. 4) With adapter: 065B3525: DN B3526: DN B3527: DN Design (VFG 2 1 Valve body 2 Valve seat 3 Bellow 4 Valve insert 5 Diaphragm VFG 21 DN VFG 21 DN VD.AA.N9.02 Danfoss 10/2014 DEN-SMT/SI
5 Ordering (VFGS 2 - for steam) Cone: metal/metal sealing, pressure relieved. Picture DN k VS k VS T max Code No. (mm) (m 3 /h) (m 3 /h) ( C) PN 16 PN 25 PN , B B B , B B B , B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B2465 Valves with flow divider for noise reduction (see accessories) Max. medium temperatures for valves VFGS 2 see table below. Max. medium temperatures for valves VFGS 2 VFGS 2 PN DN DN Steam, max. 200 C 16, 25, 40 with seal pot Steam, max. 300 C 16, 40 with seal pot Steam, max. 300 C 16 with seal pot and valve stem extension ZF4, ZF5 Steam, max. 350 C 25, 40 with seal pot and valve stem extension ZF4, ZF5 Technical data (VFGS Nominal diameter DN k VS value (m 3 /h) 4 6, k VS value (m 3 /h) 2,5 4,0 6, z value acc. to VDMA ,6 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,4 0,35 0,3 0,2 0,2 (bar) AFT PN 25, 40 PN ) (bar) PN AMV(E) 655, 658, 659 5) (from Q4 2014) PN 25, Nominal pressure PN 16, 25 or 40, flanges to EN Flow medium/temperature Steam / max. 350 C Steam / max. 300 C Pressure balance Stainless steel bellow, mat. No Rolling diaphragm Valve body material PN 16 PN 25 Grey cast iron EN-GJ-250 (GG-25) Ductile iron EN-GJS T (GGG-40. PN 40 Cast steel GP240GH (GS-C 25) Cone material Stainless steel, mat. No mat. No Seat material Stainless steel, mat. No Valves with flow divider for noise reduction (see accessories) In combination with actuators AMV(E), k VS values are higher if Y60 piece is removed from valve. Above operating pressure of 14 bar use of valve stem extension ZF4, ZF6 or combination piece KF2 is necessary. 4) In order the actuator can close at max differential pressure flow velocity musn t exceed 2 m/s. 5) With adapter: 065B3525: DN B3526: DN B3527: DN DEN-SMT/SI VD.AA.N9.02 Danfoss 10/2014 5
6 Design (VFGS 1. Valve body 2. Valve seat 3. Bellow 4. Valve insert 5. Diaphragm 6. Valve body extension 7. Shut off valve for water filling 8. Closing plug VFGS 2 DN VFGS 2 DN Ordering (VFG 3 VFG 33 (mixing valve - pressure balanced) Picture DN k VS T max Code No. (mm) (m 3 /h) ( C) PN 16 PN B B B B B B B B B B B B B B B B2613 Technical data (VFG 3 Nominal diameter DN k VS value (m 3 /h) 8 12, (bar) AFT PN PN (bar) PN AMV(E) 655, 658, 659 (from Q4 2014) PN 25, Nominal pressure PN 16 or 25, flanges to EN Flow medium/temperature Circ.water / Glycolic water up to 30% / C (350 C with ZF4) Pressure balance Stainless steel bellow, mat. No Valve body material PN 16,25 Ductile iron EN-GJS T (GGG-40. Cone material Stainless steel, mat. No Seat material Stainless steel, mat. No Above operating pressure of 14 bar use of valve stem extension ZF4, ZF6 or combination piece KF2 is necessary. In order the actuator can close at max differential pressure flow velocity musn t exeed 2 m/s. With adapter: 065B3525 DN B3526 DN VD.AA.N9.02 Danfoss 10/2014 DEN-SMT/SI
7 Applications (VFG 3 A B AB AFT06 / VFG 33 A B AB Heating Cooling Mixing valve used in mixing application Mixing valve used in diverting application Design (VFG 3 1 Valve body 2 Valve seat 3 Bellow 4 Valve insert A B B A Ordering (VFU Opening valve, pressure relieved. VFU 2 (metallic sealing cone) Picture DN (mm) k VS (m 3 /h) 15 4,0 T max ( C) Code No. PN B ,3 065B ,0 065B B B B B B B B2747 DEN-SMT/SI VD.AA.N9.02 Danfoss 10/2014 7
8 Technical data (VFU Nominal diameter DN k VS value (m 3 /h) 4 6, z value acc. to VDMA ,6 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,4 0,35 (bar) AFT.. PN (bar) AMV(E) 655, 658, 659 PN (from Q4 2014) Nominal pressure PN 16, flanges to EN Flow medium/temperature Circulation water / Glycolic water up to 30% / C Pressure balance Valve body material Stainless steel bellow, mat. No Grey cast iron EN-GJ-250 (GG-25) Cone material/conical seal Stainless steel, mat. No Seat material Stainless steel, mat. No With adapter: 065B3525: DN B3526: DN Design (VFU 1 Valve body 2 Valve seat 3 Valve insert 4 Bellow VD.AA.N9.02 Danfoss 10/2014 DEN-SMT/SI
9 Accessories Picture Type Note Code No. Comb. piece KF2 For combinations with thermostats 003G1398 Comb. piece KF3 For combinations with thermostats, pressure controllers and motorised actuators 003G1397 Valve stem extension ZF4 Valves DN For water, steam above 200 C For oil above 200 C 003G G1395 Valve stem extension ZF5 Valves DN For water, steam or oil above 200 C 003G1396 Valve stem extension ZF6 For water, steam temperatures until 200 C 003G1393 DN k VS reduced k VS Code No ,5 20 6, B , B2776 Flow divider for VFGS 2 (for noise reduction) B B B2779 Remark: Temperature controller with thermostat AFT..: This controller can be used until operating pressure of 14 bar. If the operating pressure is higher than 14 bar the valve stem extension ZF4, ZF6 or the combination piece KF2 must be used. Pressure / temperature table acc. EN Nominal pressure Material flange valves Grey cast iron Ductile iron Cast steel Permitted operational pressure in bar subject to temperature in C C 150 C 200 C 250 C 300 C 350 C PN 10 EN-GJ PN 16 (GG25) 16 14,4 12,8 11,2 9,6 PN , ,5 PN 16 EN-GJS T (GGG ,2 14,4 12,8 11,2 8,8 PN ,8 22, ,5 13,8 - PN ,7 15,2 14,4 12,8 11,2 PN 25 - GP240GH (GS-C25) 25 24,5 23,8 22, ,5 PN DEN-SMT/SI VD.AA.N9.02 Danfoss 10/2014 9
10 Dimensions H B B2 B H B2 B3 VFG 2 / 21, VFGS 2 DN VFG 2 / 21 DN H1 B1 VFG 2 valve VFG 2, VFGS 2 DN with body extension DN B mm B H PN16 6,2 6,8 8,9 11,5 14,5 17,2 28,6 31,9 60,4 67,0 117, Weight (valve) PN25 kg 6,2 7,0 9,4 11,5 14,2 17,3 29,3 31,8 59,5 65, PN40 6,6 7,6 10,3 12,4 16,1 18,2 32,1 34,5 69,6 79, ,6 B 0-550, ,5 B mm B H Weight (valve with body ext.) VFG 21 valve PN16 152, ,5 kg - PN40 150,5 328,5 475,5 DN Weight PN16 5,8 6,7 9,4 11,3 14,5 17,4 30,0 32,2 61,6 64,5 116,5 201,5 315,5 kg (valve) PN25 6,5 7,6 9,3 11,7 13,7 17,6 29,3 32,6 62,6 72, VFGS 2 valve DN PN16 6,2 6,8 9,3 11,6 14,8 17,1 29,7 32,0 62,1 65,5 Weight (valve) PN25 6,0 7,1 9,3 11,1 14,5 17,2 30,0 32,6 60,0 65,3 - PN40 kg 6,6 7,8 9,3 12,4 15,6 18,1 32,8 35,1 70,1 76,0 Weight PN16 174,7 305,5 512,1 (valve with - body ext.) PN40 193,5 314,3 539,5 10 VD.AA.N9.02 Danfoss 10/2014 DEN-SMT/SI
11 Dimensions (continuous) B C B /2 VFU 2 DN VFG 33 DN VFG 33 valves DN mm B Weight kg 10, VFU 2 valve DN B mm C Weight kg 7,0 9, Comb. piece KF2, KF3 Valve stem extension ZF4, ZF5 Valve stem extension ZF6 DEN-SMT/SI VD.AA.N9.02 Danfoss 10/
12 12 VD.AA.N9.02 Produced by Danfoss A/S 10/2014
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Self-operated Temperature Regulators Type 1 to Type 9. PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F
Self-operated Temperature Regulators Type 1 to Type 9 PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F Edition April 2012 Information Sheet T 2010 EN Self-operated
Thermostatic element RAVV for 2-way valves
Description / Application RAVV is a self-acting thermostatic element which can be combined with 2-way valve bodies RAV-/8, VMT-/8 or VMA 15. RAVV is used to control temperatures in small hot water cylinders
Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity)
Data Sheet Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity) Application RAS-C² thermostatic sensor RA-FN angle valve The RAS-C² thermostatic sensor is a selfactuating proportional
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
Butterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
Automatic Bypass Control AVDO
Application AVDO is a self-acting constant flow control primarily used either to maintain minimum flow rates through e.g. a low-capacity gas boiler or to control the differential pressure in a central
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
Series description: Wilo-Yonos MAXO-D
ATAC Solutions LTD / 1 / Series description: 1 /,5-1 1 5/,5-1 3/,5-7 3 3 5/ /, / 11 5-,5-,5-9 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
2- and 3-port valves with flanged connections, PN 10
4 402 VVF32.. VXF32.. ACVATIX 2 and 3port valves with flanged connections, PN 10 From the largestroke valve line VVF32.. VXF32.. Performance valves for medium temperatures from 10 150 C Valve body of grey
ARI-ASTRA / ASTRA Plus Combinend flow regulating valve
ARI-ASTRA - Free of maintenance combinend flow regulating valve - soft sealed (to 120 C) ARI-ASTRA Plus - Free of maintenance combinend flow regulating valve (to 175 C resp. 350 C) ARI-ASTRA / ASTRA Plus
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting Disk Check Valve Body Shaft Disk Bearing bush Seat Technical details Nominal pressure PN 10 / PN 16 Nominal diameter DN 200...1200 Fields of application:
Integrated Presetting Valves for Normal 013G0372 and Small 013G0373 Volume Flows
Integrated Presetting Valves for Normal 013G0372 and Small 013G0373 Volume Flows Application Integrated valves, type RA-N (013G0372) and RA- U (013G0373), with built-in presetting are designed for incorporation
Integrated Presetting Valves - for Normal Volume Flows RA-N and for Small Volume Flows RA-U
Integrated Presetting Valves - for Normal Volume Flows RA-N and for Small Volume Flows Application Integrated valves, type RA-N (013G1382) and RA- U (013G1383), with built-in presetting are designed for
MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Series description: Wilo-Yonos MAXO
16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
TA-FUS1ON. Fully adjustable Kvs control and balancing valves. That s just two good.
TA-FUS1ON Fully adjustable Kvs control and balancing valves. That s just two good. Supported by the Reece hvac-r network. Through our 36 stores around Australia, Reece hvac-r is committed to supporting
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
Thermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
RADIATOR VALVES / MANIFOLD ASSEMBLIES AND DIVERTERS
RADIATOR VALVES / MANIFOLD ASSEMBLIES AND DIVERTERS MANIFOLD ASSEMBLIES ONE-PIPE Compatible with most radiators on the market, this pre-assembled manifold for one-pipe radiator systems delivers balancing
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Direct steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
EVAC ONLINEVAC TECHNICAL DATA 6547655 EVAC ONLINEVAC 16, 24 V DC. Required maintenance space 700 mm. Required maintenance space 200 mm 360 Ø13
Date: 9 Apr 202 Doc. 002967-6547655 6, 24 V DC Ø3 360 Required maintenance 990±0 960 40 040 20 890 350 (P/N 546664) 95±5 67±5 Vacuum sensor G /4 88±5 INLET DN40 943 Connection Frame: Steel S235 EN 0025
Type overview. Technical data
Technical data sheet R3..xx-S.. Characterised control valve, 3-way, Internal thread For closed cold and warm water systems For modulating water-side control of air handling units and heating systems ir
Water valves REFRIGERATION AND AIR CONDITIONING. Fitters notes
REFRIGERATION AND AIR CONDITIONING Fitters notes Contents Page Application...3 Identification...3 Installation...5 Setting...6 Maintenance...6 Spare parts...8 Fault location...9 2 RZ4DA202 DKRCC.PF.D00.A1.02
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
Duplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing
![DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing](/thumbs/40/21574271.jpg "DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing")
Technical data sheet R5.. Characterized control valves, 3-way, with external thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
Automatic balancing valves ASV
Automatic balancing valves ASV ASV-P ASV-PV ASV-PV ASV-PV ASV-BD ASV-I ASV-M 15-40 15-40 50 65-100 15-50 15-50 15-50 Description / Application ASV balancing valves are used for dynamic hydronic balance
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
Vacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Type 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H or pilot (see Figure 1). These pilots
Thermostatic Actuators
2 111 EN 215-1 RTN51 with remote sensor RTN81 with remote adjuster Thermostatic Actuators for radiator valves VDN, VEN, VUN, VPD and VPE RTN51 RTN81 Self-acting, without auxiliary power High-quality fluid-filled
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Data sheet ECC 12 and 22
Application ECC is an electronic room temperature controller for water-based systems. ECC can control - fan-coil units - inductions units - air conditioning systems - small ventilating systems - 2-pipe
REGULATORS D& HD Series
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2002 Watson McDaniel Company Ductile Iron body - HD Series Full port strainer & blowdown valve on pilot
Stop valve with soft seal. Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Straight through with flanges ARI-EURO-WEDI
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 ARI-EURO-WEDI - Hood valve Fig. 070 Fig.
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Custom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
V5001S. Kombi-S Shutoff Valve. Product specification sheet
V5001S Kombi-S Shutoff Valve Product specification sheet Application The V5001S Kombi-S shutoff valve is used to shutoff pipelines in residential or commercial hydronic heating and cooling systems. It
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Overview of the. measurement and control technology range
Overview of the measurement and control technology range precise innovative Precision - Made in Germany Schubert & Salzer Control Systems GmbH is a medium-sized company in the Schubert & Salzer Group with
PRESSURE REDUCING VALVES
0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
BERMAD Waterworks. High Pressure, Surge Anticipating Control Valve. 800 Series. Model 835-M. Features and Benefits. Major Additional Features
High Pressure, Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Introduction. Angle/Flared/Sequence/Changeover Service Valves. Valves D-193. www.usa.siemens.com/hvac
Introduction Angle/Flared/Sequence/Changeover Service D-193 In this section, you will find flared, angled, sequence and changeover valves for use in service applications. D-194 Need additional assistance?
VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES
VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES PRODUCT DATA Design VC Series zone valves consist of: 2-way or 3-way valve housing available with various connection ends Spindle and cartridge
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Data sheet Thermostatic sensors type RA 2000
Thermostatic sensors type RA 2000 EN 215-1 RA 2990 RA 2992 RA 2920 RA 5060 RA 5074 Application The RA series is a comprehensive programme of radiator thermostats which covers all central and district heating
Inline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
Overview of types. Technical data
Technical data sheet R3..xx-S.. Characterised control valves, 3-way, with internal thread For closed cold and warm water systems For modulating water-side control of HU and heating systems ir bubble-tight
HVAC Valves and Actuators Catalogue
HVAC Valves and Actuators Catalogue Issue: September 2008 Make the most of your energy TAC the Single Source for all your Valve and Actuator Needs This catalogue presents the comprehensive HVAC Valve and
stainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
TECHNICAL BULLETIN. Kämmer LinedFlow - 132000 Corrosive Application Valves. Experience In Motion FCD KMENTB3221-01 04/12
TECHNICAL BULLETIN Kämmer LinedFlow - 132000 Corrosive Application Valves FCD KMENTB3221-01 04/12 Experience In Motion Description ¼-inch NPT test port Large guided stem area Bellows seal eliminates stem
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature