Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification

Transcription

1 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Version Number: Issue Date: 05/11/15 Supercedes Date: 02/06/15 SECTION 1: Identification 1.1. Product identifier 3M Ceramic Microspheres Product Identification Numbers , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Recommended use and restrictions on use Recommended use Additive for Paint, Coating and Film Applications, Unique, semi-transparent, white-colored, fine particle size, high-strength microspheres, used to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations Supplier s details MANUFACTURER: 3M DIVISION: Advanced Materials Division ADDRESS: 3M Center, St. Paul, MN , USA Telephone: M HELPS ( ) 1.4. Emergency telephone number or (651) (24 hours) SECTION 2: Hazard identification 2.1. Hazard classification Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR Label elements Signal word Not applicable. Symbols Page 1 of 8

2 Not applicable. Pictograms Not applicable Hazards not otherwise classified None. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Ceramic Microspheres SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention Most important symptoms and effects, both acute and delayed See Section Information on toxicological effects Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media Material will not burn. Non-combustible. Use a fire fighting agent suitable for surrounding fire Special hazards arising from the substance or mixture None inherent in this product Special protective actions for fire-fighters No special protective actions for fire-fighters are anticipated. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. Observe precautions from other sections Environmental precautions Page 2 of 8

3 Avoid release to the environment Methods and material for containment and cleaning up Collect as much of the spilled material as possible. Use wet sweeping compound or water to avoid dusting. Sweep up. Place in a closed container approved for transportation by appropriate authorities. Clean up residue. Seal the container. Dispose of collected material as soon as possible. SECTION 7: Handling and storage 7.1. Precautions for safe handling For industrial or professional use only. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling Conditions for safe storage including any incompatibilities No special storage requirements. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS Exposure controls Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Safety Glasses with side shields Skin/hand protection No chemical protective gloves are required. Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties General Physical Form: Solid Page 3 of 8

4 Specific Physical Form: Fine Powder (less than 10 microns) Odor, Color, Grade: White odorless powder Odor threshold ph 9-11 [Details: 1% aqueous solution] Melting point 1,000 ºC Boiling Point Flash Point Evaporation rate Flammability (solid, gas) Not Classified Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure Vapor Density Density g/cm3 Specific Gravity [Ref Std: WATER=1] Solubility in Water Negligible Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Bulk density lb/ft3 Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents SECTION 10: Stability and reactivity Reactivity This material is considered to be non reactive under normal use conditions Chemical stability Stable Possibility of hazardous reactions Hazardous polymerization will not occur Conditions to avoid None known Incompatible materials None known Hazardous decomposition products Substance None known. Condition At Elevated Temperatures SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be Page 4 of 8

5 relevant to the material as a whole Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Mechanical Skin irritation: Signs/symptoms may include abrasion, redness, pain, and itching. Eye Contact: Mechanical eye irritation: Signs/symptoms may include pain, redness, tearing and corneal abrasion. Ingestion: May be harmful if swallowed. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Ingestion No data available; calculated ATE 2,000-5,000 mg/kg Ceramic Microspheres Dermal LD50 estimated to be > 5,000 mg/kg Ceramic Microspheres Ingestion LD50 estimated to be 2,000-5,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Ceramic Microspheres Rabbit No significant irritation Serious Eye Damage/Irritation Name Species Value Ceramic Microspheres Rabbit Mild irritant Skin Sensitization Respiratory Sensitization Germ Cell Mutagenicity Name Route Value Ceramic Microspheres In Vitro Some positive data exist, but the data are not sufficient for classification Carcinogenicity Name Route Species Value Page 5 of 8

6 Ceramic Microspheres Inhalation Multiple animal species Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Target Organ(s) Specific Target Organ Toxicity - single exposure Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Ceramic Microspheres Inhalation pulmonary fibrosis Some positive data exist, but the data are not sufficient for classification Ceramic Microspheres Inhalation respiratory system Some positive data exist, but the data are not sufficient for classification Multiple animal species Human NOAEL not available NOAEL not available occupational exposure Aspiration Hazard Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. EPA Hazardous Waste Number (RCRA): Not regulated SECTION 14: Transport Information Page 6 of 8

7 Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M transportation classifications are based on product formulation, packaging, 3M policies and 3M understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: Regulatory information US Federal Regulations Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No State Regulations Contact 3M for more information Chemical Inventories This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. This product complies with the New Zealand Hazardous Substances and New Organisms Act (1996). Contact 3M for more information International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR SECTION 16: Other information NFPA Hazard Classification Health: 1 Flammability: 0 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. HMIS Hazard Classification Health: 1 Flammability: 0 Physical Hazard: 0 Personal Protection: X - See PPE section. Hazardous Material Identification System (HMIS III) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS III ratings are to be used with a fully implemented HMIS III program. HMIS is a registered mark of the American Coatings Association (ACA). Page 7 of 8

8 Document Group: Version Number: Issue Date: 05/11/15 Supercedes Date: 02/06/15 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M 3M USA SDSs are available at Page 8 of 8