Modular Lube Lubrication Systems

Transcription

1 Divider Valves UV Divider Valves UV Divider Valves are designed to meter oil or grease in automatic or manual systems installed on all types of industrial machinery. Segmented baseplate assembly contains all inlet and outlet connections. lternate outlet ports are located on the face of the divider valve which may be used for installation of performance indicators. Specifications: Max. Points/ ssembly * Can also be used as an alternate outlet port. UV Baseplate and Tie Rod Specifications: Max. No. of s No. of Divider Valves End Section Tie Rod* * Each tie rod model number includes three tie rods and three fastening nuts. Note: Use closure plug (⅛" NPT) to plug non-working outlets. in. Dimensions mm B in. B mm UV Divider Valve Specifications: Max. Oper. press. / Single Number Inlet Section Lubricant Output cu. in. 05S S S S S S S S Intermediate Section Thread Thread cc Performance Port* / ¼" NPSF(F) ⅛" NPSF(F) ⅛" NPSF(F) Twin Number Material of Yellow chromate plated steel Lubricant output cu. in. Seal Flouroelastomer 05T T T T T T T T UV Bypass Block Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and Buna-N seals. cc 4

2 Divider Valves MC²-HP Divider Valves 1.87" 48mm 3.38" 86mm MC²-HP High Divider Valves are designed to dispense either petroleum-based or synthetic lubricants in gas engine and compressor lubrication systems. Segmented baseplate assembly contains all inlet and outlet connections. lternate outlet ports are located on the face of the divider valve which may be used for installation of performance indicators. Specifications: 1.87" 48mm Points/ ssembly Operating Press. / * Can also be used as an alternate outlet port. Inlet Performance Port / 512 ¹ ₄" NPTF(F) NPSF(F) ⁵ ₁₆" - 24 UNF Material of Black chromate plated steel Seal Flouroelastomer MC²-HP Baseplate and Tie Rod Specifications: Intermediate Dimensions Number Number of Inlet End Tie Rod* Section of s Divider Valves Section Section (Qty Req'd) (Qty Req'd) in. mm (3) (3) (3) (4) (3) (5) (3) (6) (3) (7) (3) (8) * Each tie rod model number includes three tie rods. Note: Use closure plug (⅛" NPT) to plug non-working outlets. Each end section contains three tie rod nuts MC²-HP Divider Valve Specifications: Single Number Lubricant Output cu. in. 06S S S S S cc Twin Number Lubricant Output cu. in. cc 06T T T T T MC²-HP Bypass Block Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and flouroelastomer gasket plate. 5

3 Divider Valves XL Divider Valves XL Divider Valves are designed to meter large volumes of oil or grease in manual or automatic lubrication systems for all types of industrial machinery. These units can be used in complete XL systems or integrated as a primary divider valve assembly in systems using UV divider valves as secondaries. Solid one piece baseplate contains all inlet and outlet connections. Convenient front located ports on the divider valve are provided for installation of any desired performance indicators. Specifications: Points/ ssembly Operating Press. / Inlet XL Baseplate Specifications: No. Number of No. of Divider s Valves* Dimensions in. mm * Use No closure plug (¼ NPT) to plug non-working outlets. Performance Port* Material of Seal / 172 ³ ₈" NPTF(F) ¹ ₄" NPTF(F) NPTF(F) Zinc plated steel Buna-N * Can also be used as an alternate outlet port. XL Divider Valve Specifications: Single Total Lubricant Output cu. in. cc 30S S S S S S S S S S S S Twin Total Lubricant Output cu. in. cc 30T T T T T T T T T T T T XL Bypass Block Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and flouroelastomer o-ring seals. 6

4 UV, XL & MC Divider Valve ccessories UV, XL Divider Valve ccessories tmospheric Safety Relief s High pressure ruptures disc, pressure and lubricant vents to the atmosphere. UV, XL Reset-Type Performance s High pressure extends indicator. Reset the indicator after pressure is relieved. dapter Rating Disc Color Replacement Disc (10/pkg) Yellow Red Purple Yel/Nat UV, XL Rating Note: O-rings are flouroelastomer MC 2 Divider Valve ccessories Pin Type Performance s High pressure ruptures internal disc and extends indicator. ⅛" NPTF(M) ⅛" NPTF(M) dapter connects UV, XL style performance indicators to MC 2 style divider valves and old style ML. Includes flouroelastomer O-ring. MC Thread ⁵ ₁₆" -24 Male x ⅛" NPTF(F) Rating Disc Color Replacement Disc (10/pkg) Yellow Red Orange Note: O-rings are flouroelastomer ⁵ ₁₆"-24 Male Reset-Type Performance s High pressure extends indicator. Reset the indicator after pressure is relieved. Rating Spring/Tag Color Green Yellow Red Orange Blue Note: O-rings are flouroelastomer ⁵ ₁₆"-24 Male 7

5 Divider Valve ccessories Cycle Switch for Natural Gas Compressors Designed to work with Lincoln MC, MC² HP valves as wel as with other brands. Simple installation reduces labor costs. Features captured magnet assembly and hall effect switch. Cycle Switch with Shutdown Feature Lower-cost, stand-alone solution Shut down protection for no flow conditions is factory set at two minutes Operates from 5-30 VDC for increased reliability Part No Cycle Switch Cycle Switch attaches to valve with cycle indicator pin, sends electrical signal to controller. Switch Type Switch Capacity SPDT Cycle Counter Cycle Counter attaches to valve with cycle indicator pin, counts and records cycles. Counts ,999 Proximity Switch Cycle Switch for Natural Gas Compressors Block Style Switch Switch Type Capacity UV 10 Watts 87617* MC SPST 200 VDC XL Size mp thru12 External Singling/Cross Port Kit External Cross Port Kit connects alternate outlet ports to combine the volume of two divider valves through a single outlet. Block Type pplication/usage MC Single and Crossport XL Crossport XL Singling UV Crossport Balancing Valve Balancing Valve is used when back pressure differential between divider valve outlets exceeds 1000 psi (69 ). Description Hall Effect/Cycle Switch with Shutdown for Lincoln MC²-HP series block Hall Effect/Cycle Switch with Shutdown for Lincoln UV and Graco Lubriquip - Manzel MHP series style block djustment Min Max 8 Power Req. 5 to 30 VDC, 100 U max. Working 7500 psi *Can be used with Datalogger Lubrication Monitor Temperature Range -40 C to 85 C (-40 F to 185 F) /250 VC VDC CS Certification Class l, Group, B, C & D / Class ll, Group E, F & G Hazardous Locations Inlet/ Material luminum Housing, Stainless Magnet ssembly EX Rating pproval pending for Class I, Groups, B, C & D, Div. 1 & 2 CE, II 3G Ex Na II Conduit ¹ ₂" - 14 NPSM Conduit ¹ ₂" NPT(F) Seal Material NPTF(F) Flouroelastomer

6 Divider Valve ccessories Mounting Bracket (UV) and (MC 2 ) Mounting Brackets Mount divider valve assembly off the face of vertical surfaces. Use two brackets per divider valve assembly. Check Valves Check valves maintain prime in feed lines and check back pressure from pressurized lubrication points. Double Ball, Straight Length Inlet Max Opening Material Inlet-in. -in. in./mm ¹ ₄" ¹ ₄" 3.72/94.5 NPTF(F) NPTF(M) S.S. 3.75/95.3 ¹³ ₁₆" ¾" 3.31 / NPTF(F) NPTF(M) S.S ⁹ ₁₆-18 ⁷ ₁₆-20 Stainless ¾" 2.75/ UNF (M) UNF (M) Ball & Poppet, Straight Max Opening Inlet NPTF(F) ¹ ₄" NPTF(F) NPTF(M) ¹ ₄" NPTF(M) Material Inlet-in. -in. ¾" ¹³ ₁₆" Length in./mm Ball Type, Straight Length Inlet Max Opening Material in. in./mm ¹ ₄" NPTF(M) ¹ ₄" NPSF(F) ¹¹ ₁₆" 1.38/ NPTF(M) NPTF(F) ⁹ ₁₆" 1.19/ NPTF(F) NPTF(M) ½" 1.06/27.0 Ball & Poppet, Dimensions Inlet Inletinin. - in. / mm Material Max Opening B NPTF(F) NPTF(M) ¾" ¹³ ₁₆"