New Power Wire Processing Machinery Co.,Ltd.

Transcription

1 Product Images Single Core Hard Wire Stripping Cutting Machine (WPM-09K) Product Name : Single Core Hard Wire Stripping Cutting Machine Product Model: WPM-09K This model is a heavy-duty wire stripping and cutting machine, which can process upto AWG4 wires! It's also suitable for stripping and cutting single core hard wires and multi-core cables! Available Material: Single hard wire, muli-core wire etc. Max. Conduit Diameter: φ10mm Available Wire Size: 0.1 ~ 25mm2 Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~99mm, End 0~50mm Max. Middle Stripping Section: 13 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 2000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Power Rating: 220W

2 Product Images Dual Wire Cutting and Stripping Machine (WPM-09F) Product Name : Dual Wire Cutting and Stripping Machine Product Model: WPM-09F This model is an updated version of WPM-09C, which can strip two wires at one time, so the speed is much higher. You can also strip one wire at a time if you like. Available Core Cross-Section Range: mm2 (AWG14 - AWG32) Max. Conduit Diameter: φ4.5mm Feature: Can process 2 wires at one time Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~35mm, End 0~15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 5000~15000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: suitable for kinds of wires, such as PVC, Teflon, glass wires, etc. Power Rating: 180W

3 Product Images Coax Cable Stripping and Cutting Machine (WPM-09S) Product Name : Coax Cable Stripping and Cutting Machine Product Model: WPM-09S This model is designed for stripping and cutting coax cables, it can strip each layer with different length! You only need to set the stripping length of each layer and other parameters, then it will strip and cut wires full automatically! Available Material: coaxial cable, coaxial wire Max. Conduit Diameter: φ9mm Max. Stripping Layers: two layers Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~99mm, End 0~50mm Max. Middle Stripping Section: 13 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 5000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Power Rating: 220W

4 Product Images Flat Cable Stripping Cutting and Splitting machine (WPM-09E+S) Product Name : Flat Cable Stripping Cutting and Splitting machine Product Model: WPM-09E+S This machine is designed for processing flat cables, it can strip cut and split flat cable full automatically! If you need not split the cable head and tail, you can also take away the extra cable splitter. Available Core Cross-Section Range: mm2 Max. Width for Flat Cable: 25mm Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~50mm, End 0~50mm Splitting Function: Automatic split flat cable before stripping & cutting Max. Middle Stripping Section: 13 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: flat cable, data cable, flat wire Power Rating: 300W

5 Flat Dual Core Wire Stripping and Cutting machine (WPM-09P) Product Name : Flat Dual Core Wire Stripping and Cutting machine Product Model: WPM-09P This model is designed for stripping flat dual core wires, it can strip the outside jacket and inner core insulations at one time! You can set the stripping length of wire jacket and inner insulations freely! (Exp. You can set the stripping length of wire jacket to 50mm long, and then set the stripping length of inner core to 20mm long). Available Core Cross-Section Range: mm2 Max. Conduit Diameter: φ10.0mm Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~99mm, End 0~50mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Appropriate Wire: PVC, Teflon, glass wire Power Rating: 220W

6 Wire Stripping Cutting Machine (WPM-09B) Product Name : Wire Stripping Cutting Machine Product Model: WPM-09B This is the most economic full automatic wire stripping and cutting machine, suitable for AWG14-AWG32 wires. You only need to set the cutting length, stripping length of both side, total amount etc. then it will strip & cut automatically. Available Core Cross-Section Range: mm2 (AWG14 - AWG32) Conduit Diameter: φ4.5mm Cutting Length: mm Stripping Length: Head 0-35mm, Tail 0-15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L = Cutting Length) Speed: pcs/hour Display: LCD display with english menu Drive Mode: two wheels drive Appropriate Wire: Suitable for kinds of wires, such as PVC, Teflon, glass wires etc. Power Rating: 180W

7 Product Images Wire Cutting Stripping Machine (WPM-09C) Product Name : Wire Cutting Stripping Machine Product Model: WPM-09C This model is four wheels drive automatic wire stripping and cutting machine, suitable for mm2 wires, you only need to set the stripping length, cutting length, total amount etc. then it will strip & cut your wires full automatically. Available Wire Size: mm2 (AWG12 - AWG32) Conduit Diameter: φ4.5mm Cutting Length: mm Stripping Length: Head 0-35mm, Tail 0-15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L = Cutting Length) Speed: pcs/hour Display: LCD display with english menu Drive Mode: four wheels drive Appropriate Wire: Suitable for kinds of wires, such as PVC, Teflon, glass wires etc. Power Rating: 180W

8 Wire Stripping and Cutting Machine (WPM-09D) Product Name : Wire Stripping and Cutting Machine Product Model: WPM-09D This model has a strong motor, suitable for AWG9 ~ AWG32 wires. You only need to set the stripping length of both side, total cutting length, quantity etc., then it will strip and cut your wires full automatically! Specifictions: Available Core Cross-Section Range: mm2 (AWG9 ~ AWG32) Conduit Diameter: φ10mm Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~35mm, End 0~15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: Suitable for kinds of wires, such as PVC, Teflon, glass wires etc. Power Rating: 220W

9 Product Images Flat Cable Stripping and Cutting Machine (WPM-09E) Product Name : Flat Cable Stripping and Cutting Machine Product Model: WPM-09E This model is designed for stripping and cutting flat cables (flat wires), the Max. avaible cable width is upto 20mm, you can set the stripping length, cutting length and other parameters through LCD display, then it will strip and cut your wires full automatically! Available Core Cross-Section Range: mm2 Max. Width for Flat Cable: 20mm Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~35mm, End 0~15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: flat cable, data cable, flat wire Power Rating: 300W

10 Product Images Short Wire Stripping and Cutting Machine (WPM-09FS) Product Name : Short Wire Stripping and Cutting Machine Product Model: WPM-09FS This model is designed for stripping and cutting very short wires, The Min. cutting length can be 30mm long whith both side stripped! It can also process two wires at one time with high speed! Available Core Cross-Section Range: mm2 (AWG14 - AWG32) Max. Conduit Diameter: φ4.5mm Feature: Can process 2 wires at one time Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~15mm, End 0~15mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 5000~15000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: suitable for kinds of wires, such as PVC, Teflon, glass wires, etc. Power Rating: 180W

11 Automatic Wire Stripping and Cutting Machine (WPM-09H) Product Name : Automatic Wire Stripping and Cutting Machine Product Model: WPM-09H This model can stip upto 50mm long! The motor is also stronger than WPM-09D, so it's suitable for AWG7 - AWG32 wires. Available Core Cross-Section Range: mm2 (AWG7 ~ AWG32) Conduit Diameter: φ10mm Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~99mm, End 0~50mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: Suitable for kinds of wires, such as PVC, Teflon, glass wires etc. Power Rating: 220W

12 Product Images Wire Stripping Cutting and Twisting Machine (WPM-09T) Product Name : Wire Stripping Cutting and Twisting Machine Product Model: WPM-09T This model can strip cut and twist wire full automatically, especially suitable for multi-core soft wires! Available Core Cross-Section Range: mm2 (AWG12 ~ AWG32) Max. Conduit Diameter: Φ6mm Feature: Can process 2 wires at one time Cutting Length: 5 ~ 9999mm Stripping Length: Head 0~50mm, End 0~35mm Max. Middle Stripping Section: 11 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 5000~15000pcs/hour Display Way: English LCD dispaly Drive Mode: Four wheel drives Appropriate Wire: suitable for kinds of wires, such as PVC, Teflon, glass wires, etc. Power Rating: 220W

13 Product Images wire stripping machine (WPM-220 two-pc) wire stripping machine (WPM-220 two-pc) Features Description: For electronic wire, silicone wire, Teflon wire, glass fiber lines, isolated lines, coaxial, casing, etc., automatic cutting, skinning, semi-stripping, intermediate peeling, twisted line of special functions; can instantly transform wire specifications and size. Model WPM-220 WPM T Appearance Dimension 450mm 450mm 360mm 450mm 720mm 360mm Weight 36Kgs (NET) 39Kgs (NET) Power Electricity consumption Cutting Length Stripping length Twist length Cut error For diameter AC 110V/220V 50/60Hz MIN.20W-MAX.220V mm mm (line of sight material may be) mm (timber line of sight may be) Corrects AWG # 16-AWG # 32 (line of sight material may be)

14 wire stripping-machine (WPM T) WPM T line of ultra-short linear PC CD-twist All-digital intelligent stripping machine is used 32-bit high-speed digital signal processor (DSP), and mature combination of motion control technology independently developed by a new generation of intellectual property with full wiring harness processing equipment. Showed that some selected graphics dot matrix LCD, Chinese interface, realistic graphics, full account of the user habits, user-friendly design, more convenient and simple to use. Products are suitable for wire and cable, coaxial cable, sheathed cable, cable processing. Processed out of harness, length consistent look and feel beautiful, twisted good effect. Model Power Limit voltage Rated Cutting Length Peeling head Stripping tail Twisted end of Twisted wire end Cut error For diameter WPM T AC 110V/220V 50/60Hz 202V ~ 240V 7A ~ 15A mm 0. 1MM ~ 250MM 0. 1MM ~ 150MM 1MM ~ 30MM (line of sight material may be) 1MM ~ 15MM (line of sight material may be) Corrects AWG # 14-AWG # 32 (line of sight material may be) Product Images Cut & Strip Machine (WPM-C2A) The Model WPM-C2A is a specialist fully programmable bench top automatic cut & strip machine designed for small diameter and short length processing. This fast yet compact machine easily processes stranded wire from 18 to 36 AWG, and up to 2.8mm O.D. The machine has a user friendly Menu Driven Software which makes setup fast and simple, requiring no tools apart from changing the guide tubes. Every Machine comes complete with a full set of Wire Guide Pipes (1, 2, & 3mm) Dual Plane Wire Straightener, spare set of blades & motor drive belts. Full 1 Year Return to base warranty. TECHNICAL DATA VOLTAGE : AC 220v 50Hz or AC 110v 60Hz, Switched Inside Unit SIZE : 430mm x 260mm x 400mm WEIGHT : 34.0kgs MAXIMUM / MINIMUM WIRE SIZE : 18 ~ 36 AWG MAXIMUM CABLE SIZE : 2.8mm PRODUCTION : 5520 Pieces Per Hour Max (Length 100mm 3mm Strip Both Ends) MEMORY : 250 Wire Programs WIRE QTY : 1 ~ 999,999 Pieces WIRE LENGTH : 0.2mm mm

15 STRIP LENGTH : 0.1mm ~ 12mm one end 0.1mm ~ 30mm other end MACHINE WARRANTY : 12 Months Product Images CUT & STRIP MACHINE (WPM-C1A) The Model WPM-C1A is an entry level fully programmable bench top automatic cut & strip machine. This powerful yet compact machine easily processes stranded wire from 10 to 32 AWG, and multi-conductor cable up to 4.8mm O.D. The machine has a user friendly Menu Driven Software which makes setup fast and simple, requiring no tools apart from changing the guide tubes. Every Machine comes complete with a full set of Wire Guide Pipes (2, 3, 4, & 5mm) Dual Plane Wire Straightener, spare set of blades & motor drive belts. Full 1 Year Return to base warranty. Rubber feed rollers available - MCSWE (Set of 4) TECHNICAL DATA VOLTAGE : AC 220v 50Hz or AC 110v 60Hz, Switched Inside Unit SIZE : 430mm x 260mm x 400mm WEIGHT : 35.0kgs MAXIMUM / MINIMUM WIRE SIZE : 10 ~ 32 AWG MAXIMUM CABLE SIZE : 4.8mm 6240 Pieces Per Hour Max (Length 100mm 3mm Strip PRODUCTION : Both Ends) MEMORY : 250 Wire Programs WIRE QTY : 1 ~ 999,999 Pieces WIRE LENGTH : 0.2mm mm STRIP LENGTH : 0.2mm ~ 39mm MACHINE WARRANTY : 12 Months MCSWE : New Style Blade set 36.5mm x 15mm x 2.5mm Product Images CUT & STRIP MACHINE (WPM-C3A) CUT & STRIP MACHINE (WPM-C3A) The Model WPM-C3A is a fully programmable bench top automatic cut & strip machine designed for larger diameter wires. This fast yet compact machine easily processes stranded wire from 8 to 26 AWG, and up to 6.8mm O.D. The machine has a user friendly Menu Driven Software which makes setup fast and simple, requiring no tools apart from changing the guide tubes.

16 Every Machine comes complete with a full set of Wire Guide Pipes (3, 4, 5, 6, & 7mm) Single Plane Wire Straightener, spare set of blades & motor drive belts. Full 1 Year Return to base warranty. TECHNICAL DATA VOLTAGE : AC 220v 50Hz or AC 110v 60Hz, Switched Inside Unit SIZE : 430mm x 260mm x 400mm WEIGHT : 38.0kgs MAXIMUM / MINIMUM WIRE SIZE : 8 ~ 26 AWG MAXIMUM CABLE SIZE : 6.8mm 2700 Pieces Per Hour Max (Length 100mm 3mm Strip PRODUCTION : Both Ends) MEMORY : 250 Wire Programs WIRE QTY : 1 ~ 999,999 Pieces WIRE LENGTH : 0.2mm mm STRIP LENGTH : 0.2mm ~ 39mm both ends MACHINE WARRANTY : 12 Months Product Images CUT & STRIP MACHINE (WPM-C4A) MODEL WPM-C4A - CUT & STRIP MACHINE CUTS & STRIPS EQUIPMENT WIRE UP TO 4.8mm O.D. SUPER FAST The Model WPM-C4A is a fully programmable bench top ultra fast automatic cut & strip machine designed for smaller wires. This fast (max 128 pieces per minute Length of wire 100mm stripped both ends 3mm) yet compact machine easily processes stranded wire from 16 to 30 AWG, and up to 4.8mm O.D. The machine has a user friendly Menu Driven Software which makes setup fast and simple, requiring no tools apart from changing the guide tubes. Every Machine comes complete with a full set of Wire Guide Pipes (2, 3, 4, & 5mm) Single Plane Wire Straightener, spare set of blades & motor drive belts. Full 1 Year Return to base warranty. TECHNICAL DATA VOLTAGE : AC 220v 50Hz or AC 110v 60Hz, Switched Inside Unit SIZE : 430mm x 260mm x 400mm CONSUMPTION : 100W Static - 320W in Production WEIGHT : 45kg MAXIMUM / MINIMUM WIRE SIZE : 16 ~ 30 AWG MAXIMUM CABLE SIZE : 4.8mm OD PRODUCTION : 7680 Pieces Per Hour Max (Length 100mm 3mm Strip Both Ends) MEMORY : 250 Wire Programs WIRE QTY : 1 ~ 999,999 Pieces WIRE LENGTH : 0.2mm mm STRIP LENGTH : 0.2mm ~ 30mm front end 0.2 ~ 39mm rear end MACHINE WARRANTY : 12 Months

17 Product Images 8 Roller Drive Cut & Strip Machine (WPM-C8A) Applicable Wire Type: single and multiple core copper / aluminum wire with plastic or rubber skin; Wire Size: AWG10# ~ AWG2#. Product Attributes Model Number: WPM-C8A-DB Usage: Stripping MODEL: WPM-C8A-DB OUTER DIMENSIONS: W650*D580*H380 WEIGHT: 95KG Detailed Description Applicable Wire Type: single and multiple core copper / aluminum wire with plastic or rubber skin; Wire Size: AWG10# ~ AWG2# Stripping Method: V-shape blades half-strip, be able to set up for half-stripping multiple times at both front and end ; The most outside diameter of processing wire (including the outside insulation) 13.5mm; Processing Speed: 20 PCS/minute (L=200mm,Front=End=15mm), the processing speed adjustable range: 10 PCS/minute ~ 30 PCS/minute; The longest stripping length (half-strip multiple times): 130mm; Cutting Tolerance: ±3L; Cutting length: 180mm~99999mm; Power Consumption 500W; Power Supplier: AC220V /50 Hz; or AC110V /60Hz; Air Pressure for rollers up and down: 0.3~0.6MPa (read from the air-pressure meter). Product Images computer Stripping Machine (WPMBX-1 general-purpose) WPMBX-1 general-purpose computer Stripping Machine 1. Host 02. Power Supply (220V) 03. LCD display 04. Keyboard 05,06. Linear regulator 07. Wire Block 08. Fine line pressing roller 09. Conduit seat 10. Conduit 11. Stripping knife 12. Drive wheel 13. Adjustment screw

18 14. Feed frame 15. Feed wheel 16. Guard (WPMBX-1) WPMBX-1 Technical Data Model WPMBX-1 cut tolerance L ± * 2% Dimensions 640 * 350 * 290mm Front Skinning 1-30mm (thread) Simplified Chinese version of the software back-skinned 1-20mm (Line End) Power supply 220V/50HZ way short length of 98 procedures for stripping No Power 150W program number 99 in the middle of stripping means stripping 5 Green-screen LCD display screen LCD speed 0-9 For wire AWG # 12-AWG # -32 for materials, PVC, Teflon, Glass Line cutting tool material length high speed steel, tungsten steel 1. Host 02. Power Supply (220V) 03. LCD display 04. Keyboard 05,06. Linear regulator 07. Wire Block 08. Fine line pressing roller 09. Conduit seat 10. Conduit 11. Stripping knife 12. Drive wheel 13. Adjustment screw 14. Feed frame 15. Feed wheel 16. Guard Product Images Velcro Tape Cutting Machine - Cold Knife (WPM-916) Product Name : Velcro Tape Cutting Machine - Cold Knife Product Model: WPM-916 High speed: It can cut 100~120 cut per minute. (take 50mm long for example). Automatic operation: It worwpm automatically only by setting length and quantity Automatic stopper: It stops automatically if materials run out during operation. You can set cutting times at the same position (Max. 9 times) Availabel Material: Special shape velcro tape, cloth label Cutting Method: Cold blade Max. Width: 80mm Cutting Length: 1 ~ 9999mm Speed: 120pcs/min Power Supply: 220/110V 50/60Hz

19 Dimension: cm Weight: 25Kg Product Images Automatic Tape Dispenser (M-1000) Product Name : Automatic Tape Dispenser Product Model: M-1000 Features 1) Very easy to operate, you just need to set the cutting length and quantity. 2) Support Auto Mode and Manual Mode, sensor can detect the tape piece in Auto Mode 3) Suitable for cutting various adhesive tapes, our most popular model Specifications Cutting Length: mm Available Width: 7-50mm Power Supply: 220V 50Hz Power Rating: 18W Net Weight: 3.5Kg

20 Images Automatic Tape Dispenser (ZCUT-9) Product Name : Automatic Tape Dispenser - Electric Tape Dispenser Product Model: ZCUT-9 This model can cut hold two tape rolls at one time! In auto mode, the sensor can detect if you have picked up the dispensed tape pieces and dispense another pieces automatically. Cutting Length: 5-999mm Tape Width: 5-60mm Power Supply: 220V 50Hz Net. Weight: 4.0Kg