Work and Simple Machines. 4/19/12 Bell work. ISN (p. 206)
|
|
- Brianne Jordan
- 7 years ago
- Views:
Transcription
1 Work and Simple Machines Inclined Plane Screw Wedge Lever Pulley Wheel and Axle 4/19/12 Bell work. ISN (p. 206) Copy the question and answer in a complete sentence. 1)There are simple machines all around our school building. Make a list of as many examples of simple machines that you see in our school. 2)How can your arm be used as a simple machine? Paste the notes guide Simple Machines onto page 207 of your ISN. Also paste the Uses for Simple Machines practice sheet onto page 209 in your ISN. 1
2 What is work? In science, work is done when a force causes an object to move in the direction of the force. Even the person in this picture is doing work by applying force to make the ball go the distance. Work = force x distance (W= f x d) TCAP practice problem : 2
3 TCAP practice question. Answer: D There is a difference between Force and Work. Applying a force doesn t always result in work being done. (Suppose you help push a stalled car. You push and push but the car doesn t budge. The pushing made you tired, but you haven t done any work on the car, because the car hasn t moved.you do work on the car, when the car actually moves.) Whenever you apply a force to an object and the object moves in the direction of the force, you have done work on the object. 3
4 So when is work done on an object? Work is done on an object if two things happen: A) the object moves as a force is applied b) the direction of the object s motion is the same as the direction of the force. Is this lady in the picture holding the suitcases doing work? Machines make work easier A machine is a device that makes work easier by changing the size or direction of the force. Machines are not just cars, big construction equipment, or computers. You use simple machines everyday such as scissors, chopsticks, etc. 4
5 The 6 Simple Machines Inclined Plane Screw Wedge Lever Pulley Wheel and Axle Inclined Plane The Egyptians used simple machines to build the pyramids. One method was to build a very long incline out of dirt that rose upward to the top of the pyramid very gently. The blocks of stone were placed on large logs and pushed slowly up the long, gentle inclined plane to the top of the pyramid. 5
6 Inclined Planes An inclined plane is a flat surface that is higher on one end Inclined planes make the work of moving things easier. Ex: ramps (on buildings and stairways, bath tubs) Brainpop #1: Inclined planes Wedges A wedge is a pair of two incline planes that move. Wedges are used to split things. Examples includes an ax, a zipper, or cutting knives, plows, and chisels.. 6
7 Screws: are also incline planes A screw is an incline plane that is wrapped in a spiral around a cylinder. When a screw is turned a small force is applied over the long distance along the incline plane of the screw. Meanwhile, the screw applies a large force through the short distance it is pushed. Screw are used mostly as fasteners. Levers: A lever is a simple machine that has a bar that pivots at a fixed point called a fulcrum. Levers are used to apply force to a load. (--A load is what you are applying the force on.) ß effort force (work input) Resistance Force (load)à Fulcrumà 7
8 Example of Levers. Common examples of levers include crowbars, scissors, pliers, tin snips and seesaws. More Levers Other examples of levers include nut crackers, wheel barrows, doors, and bottle openers. 8
9 Your arm acts as a lever Other examples also include tweezers, arm hammers, and shovels. Brainpop#2: "Levers" Pulleys Pulley are simple machines that have a grooved wheel. A pulley needs a rope, chain or belt around the groove to make it do work. A load is attached to the end of the rope and the input force is applied. 9
10 Pulleys are all around your house When you open a window blind by pulling on a cord, you are using a pulley. Wheel and axle A wheel and axle is a simple machine consisting of two circular objects of different sizes. Did you know that faucets are examples of a wheel and axle? Other examples include: (doorknobs, wrenches, steering wheels) 10
11 WHEEL AND AXEL Fan blades are also examples of a wheel and axle. The axel is stuck rigidly to a large wheel. Fan blades are attached to the wheel. When the axle turns, the fan blades spin. GEARS are Wheel and Axle Brainpop#4: "Wheeel and Axle" Each gear in a series reverses the direction of rotation of the previous gear. The smaller gear will always turn faster than the larger gear. 11
12 TCAP practice problem: TCAP Practice problem: 12
13 TCAP practice question. Answer: D 13
Mechanical Reasoning Review
Mechanical Reasoning Review Work can be made easier or faster through practical applications of simple and/or compound machines. This is called mechanical advantage - in other words, using the principal
More informationName Class Date. Pulley. Wedge
CHAPTER 13 2 Simple Machines SECTION Work and Energy KEY IDEAS As you read this section, keep these questions in mind: What are simple machines? What simple machines are in the lever family? What simple
More informationCompound Machine: Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle
Name SOL 4.2 Simple and Compound Machines NOTE - Simple machines are NOT included in the 5 th REVISED Science Standards Simple Machine: A machine with few or no moving parts. Simple machines make work
More informationDirected Reading A. Section: Types of Machines LEVERS
Skills Worksheet Directed Reading A Section: Types of Machines 1. A knife is actually a very sharp. 2. What are the six simple machines that all other machines are made from? LEVERS 3. A simple machine
More informationWhat are simple machines? primary
What are simple machines? primary Here you will discover all sorts of interesting things about simple machines and how they work. There are some great diagrams as well! A machine is something that makes
More informationGeorgia Performance Standards Framework for Physical Science 8 th GRADE. Unit: Fast and Furious Forces General Task Life is Easy with Simple Machines
Subject Area: Physical Science Grade: 8 Unit: Fast and Furious Forces General Task Life is Easy with Simple Machines S8P3. Students will investigate relationship between force, mass, and the motion of
More informationANSWER KEY. Work and Machines
Chapter Project Worksheet 1 1. inclined plane, wedge, screw, lever, wheel and axle, pulley 2. pulley 3. lever 4. inclined plane 5. Answers will vary: top, side, or bottom 6. Answers will vary; only one
More informationThe origin of the wedge is unknown, because it has been in use as early as the stone age.
Simple Machines Compiled and edited from Wikipedia Inclined Plane An inclined plane is a plane surface set at an angle, other than a right angle, against a horizontal surface. The inclined plane permits
More informationPartnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation Simple Machines: 4.G.1 Introduction to Simple Machines
More informationSimple Machines. What are simple machines?
Definitions to know: Simple Machines Work done when an applied force causes an object to move in the direction of the force Energy ability to cause change; can change the speed, direction, shape, or temperature
More informationInclined Plane: Distance vs. Force
1a Inclined Plane: Distance vs. Force Look at the inclined plane model you built for Card 2. It s a ramp, so it s easy to slide or roll things up and down it. As you noticed, it is a little more difficult
More informationSimple machines provide a mechanical advantage that makes our work faster and easier, and they are all around us every day.
LEARNING MODULE: SIMPLE MACHINES Pre-Visit Activities We suggest that you use these pre-visit classroom acitivites to prepare your students for a rewarding Museum visit. Before your visit, introduce your
More informationSimple Machines Quiz
Simple Machines Quiz Part 1. Write the name of the simple machine that is described questions 1-4 below. Word Bank: Wheel & Axle Screw Pulley Inclined Plane Lever 1. These two parts act as one simple machine.
More informationEngineer III Simple Machines
Harford District 2014 Cub Scout Day Camp June 23-78 Knights of the Roundtable Engineer III Simple Machines Station Volunteer s Guide Thank you for being a station volunteer! The stations are the heart
More informationSimple Kitchen Machines
Provided by TryEngineering - Lesson Focus Lesson focuses on simple machines and how they can be found in many everyday items. Students explore the different types of simple machines, how they work, and
More informationFulcrum Effort or Applied Force. Fulcrum Load or Resistance. Effort or Applied Force. Load or Resistance. Other First Class Lever Examples.
First Class Lever Second Class Lever Load or Resistance Fulcrum Effort or Applied Force Fulcrum Load or Resistance Effort or Applied Force Other First Class Lever Examples Action Spring Force Load Applied
More informationLevers and Pulleys. 5 th Grade Science Investigation. Unit
Levers and Pulleys 5 th Grade Science Investigation Unit What Do We Already Know? A lever and pulley are mechanical advantages=makes work easier, and helps lift things you couldn t t normally lift Combined
More informationPre and Post-Visit Activities
Pre and Post-Visit Activities Simple Machines Table of Contents: Important Information: 2 Vocabulary: 3 Pre-Visit Activities: 4 Post-Visit Activities: 5 Vocabulary Word Search: 6 2 Important Information
More informationWhen you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier
Simple machines OBJECTIVES When you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier A machine is an invention that makes
More informationEVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
More informationPlayful machines A Facilitator s Guide to Simple Machines in the Playground
inspiring discovery Playful machines A Facilitator s Guide to Simple Machines in the Playground Our Vision Canadians recognize that Science 1 is intrinsic to their lives and acknowledge the fundamental
More informationYou ll have leverage as you guide
Teacher s Guide Simple Machines Dear Educator, You ll have leverage as you guide students in the exploration of simple machines. In KIDS DISCOVER Simple Machines, your young scientists will learn about
More informationLevers for Lifting BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN ACTIVITY ASSESSMENT OPPORTUNITIES. Grade 3 Quarter 3 Activity 23
activity Levers for Lifting BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN Grade Quarter Activity SC.C... The student understands that the motion of an object can be described and measured. SC.H... The
More informationSCIENCE STD. V (2015) More About Force Energy and Simple Machines. Name Roll No. Date Std. V
SCIENCE STD. V (2015) More About Force Energy and Simple Machines Name Roll No. Date Std. V Q1.What is Force? Force is a push or a pull that makes the things move. Q2.What effect does Force has on our
More informationSimple Machines. Integration across the SESE curriculum History Curriculum:
Simple Machines Integration across the SESE curriculum History Curriculum: There are natural links between the theme of Simple Machines and a number of strands in the history curriculum: 1) Continuity
More informationSimple machines. Law of Simple Machines. Resistance Force x resistance distance = effort force x effort distance
Simple machines A simple machine is a evice that requires only the force of a human to perform work. One of the properties of a simple machine is that it can be use to increase the force that can be applie
More informationClipper Creations. Provided by TryEngineering - www.tryengineering.org Click here to provide feedback on this lesson.
Provided by TryEngineering - Click here to provide feedback on this lesson. Lesson Focus Develop a working model of a nail clipper. Note: This lesson plan is designed for classroom use only, with supervision
More informationOverall Indicator: The student: recognizes the effects of forces acting on structures and mechanisms
Grade 5 Performance Task: Disaster Recovery Content Connections Assessment Criterion Understanding of basic concepts Overall Indicator: The student: recognizes the effects of forces acting on structures
More informationThe Lever. The law of conservation of energy applies to all machines!
Simple Machines A machine is a device for multiplying forces or simply changing the direction of forces. Many machines can increase the speed with which work is done. The Lever The law of conservation
More informationEveryday Simple Machines
Everyday Simple Machines Teacher's Guide Editors: Brian A. Jerome Ph.D. Stephanie Zak Jerome Assistant Editors: Louise Marrier Hannah Fjeld Graphics: Fred Thodal Heidi Berry Lyndsey Canfield www.visuallearningco.com
More informationSimple Machines. Preparation. Objectives. Standards. Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4
Simple Machines Preparation Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4 Objectives This lesson will enable students to: Describe and define simple machines. Identify simple machines
More informationSimple Machines. Figure 2: Basic design for a mousetrap vehicle
Mousetrap Vehicles Figure 1: This sample mousetrap-powered vehicle has a large drive wheel and a small axle. The vehicle will move slowly and travel a long distance for each turn of the wheel. 1 People
More informationINCLINED PLANE LEVER SCREW WHEEL & AXLE WEDGE PULLEY
HANDBOOK Machines are tools that help people do work more easily. In physics, you do work anytime you use force to move an object. Skateboards, cars, bikes, shovels, boats, doors, light switches, and stairs
More informationPUSH AND PULL: SIMPLE MACHINES AT WORK
PUSH AND PULL: SIMPLE MACHINES AT WORK 1 videocassette... 23 minutes Copyright MCMXC Rainbow Educational Media 4540 Preslyn Drive Raleigh, NC 27616-3177 Distributed by: United Learning 1560 Sherman Ave.,
More informationApril Cousins Jessica Denson TEDU 414 Unit Plan Unit Plan: Simple Machines 3 rd Grade Unit Introduction: This unit focuses on use and functions of
April Cousins Jessica Denson TEDU 414 Unit Plan Unit Plan: Simple Machines 3 rd Grade Unit Introduction: This unit focuses on use and functions of simple machines and their importance in our everyday lives.
More informationMechanical & Electrical Reasoning Study Guide
Mechanical & Electrical Reasoning Study Guide About Mechanical Aptitude Tests Who is likely to take a mechanical reasoning test? Mechanical aptitude tests are commonly administered during pre-employment
More informationUsing mechanical energy for daily
unit 3 Using mechanical energy for daily activities Physics Chapter 3 Using mechanical energy for daily activities Competency Uses mechanical energy for day-to-day activities Competency level 3.1 Investigates
More informationBOARD OF SUPERVISORS. Lisa M. Garrett, Director of Personnel. To Enrich Lives Through Effective and Caring Service
COUNTY OF LOS ANGELES Department of Human Resources Workforce Planning, Test Research, and Appeals Division 3333 Wilshire Blvd., Ste. 350, Los Angeles, CA 90010 24-Hour Jobline: (800) 970-LIST http://dhr.lacounty.info
More informationPUTTING THE SIMPLE IN SIMPLE MACHINES
CORE KNOWLEDGE NATIONAL CONFERENCE ORLANDO, FLORIDA APRIL 29 - MAY 1, 1999 PUTTING THE SIMPLE IN SIMPLE MACHINES Grade Level: Presented by: Length of Unit: Second Lou Tucker, Donna Cueto, Ridge View Elementary,
More informationSimple and Complex Machines
Simple and Complex Machines A Science A Z Physical Series Word Count: 1,230 Simple and Complex Machines Written by Ned Jensen Visit www.sciencea-z.com www.sciencea-z.com Simple and Complex Machines Key
More information2.) In general, what do most simple machines do? Simple machines make work easier by reducing the force needed.
Name: Simple Machines Study Guide Force and Work- 1.) To be considered work, you have to have a force and a distance through which the force acts. 2.) What is the formula for work? work = force x distance_
More information7 TH GRADE SCIENCE REVIEW
7 TH GRADE SCIENCE REVIEW The motion of an object is always judged with respect to some other object or point. When an object changes position over time relative to a reference point, the object is in
More informationQuick and Easy Simple Machine Experiments to Share with Your Kids
Quick and Easy Simple Machine Experiments to Share with Your Kids By Aurora Lipper Pulleys and levers are simple machines, and they make our lives easier. They make it easier to lift, move and build things.
More informationMechanical Systems. Grade 8 Unit 4 Test. 1. A wheelbarrow is an example of what simple machine? Class 1 lever. Class 2 lever.
Mechanical Systems Grade 8 Unit 4 Test Student Class 1. A wheelbarrow is an example of what simple machine? D Wheel and Axle 2. A hockey stick is an example of what simple machine? D Inclined plane 3.
More informationPartnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation Simple Machines: 4.G.2 _ Inclined Planes and Pulleys Grade
More informationMECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES
MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES Simple machines: lifting devices e.g. lever systems, inclined plane, screw jack, pulley blocks, Weston differential
More informationSimple Machines TOUR EDUCATOR S GUIDE PRE- AND POST-VISIT LESSON PLAN IDEAS & STRATEGIES / GRADES: 4 TH - 8 TH
Simple Machines TOUR EDUCATOR S GUIDE PRE- AND POST-VISIT LESSON PLAN IDEAS & STRATEGIES / GRADES: 4 TH - 8 TH Overview Simple machines have played a large role in human history, supporting our everyday
More information-------------------------------------------------------------------------------------------------------------------
Name: Date: D. Thomassen 2007 Machines by Lillian Duggan answer key Colorado Model Content Standard #2: Physical Science: Students know and understand common properties, forms, and changes in matter and
More informationPuLLeys. SaraH TieCK. Simple Machines
PuLLeys i p e m h e SaraH TieCK s m l a c i n s Simple Machines s i m p e m l a c h i n e s PuLLeyS A Buddy Book by SaraH TieCK VISIT US AT www.abdopublishing.com Published by ABDO Publishing Company,
More informationChrista s Lost Lessons Simple Machines
Christa s Lost Lessons Simple Machines Introduction: Among the six lost lessons, the simple machines demonstration was most rudimentary. Perhaps, it is because most earth-based simple machines are crafted
More informationMachines. Simple. What is a machine?
Simple Machines Worksheet 2 A worksheet produced by the Native Access to Engineering Programme Concordia University, Montreal What is a machine? Webster s Dictionary defines a machine as 1. a structure
More informationSimple Machines. Student s worksheets. Carles Egusquiza Bueno. IES Rocagrossa Lloret de Mar. CLIL Course. Norwich Institute for Language Education
Simple Machines IES Rocagrossa Lloret de Mar CLIL Course Norwich Institute for Language Education January March 2010 CONTENTS Contents...2 Unit 1: Force, work and machines...3 Lesson 1: Force...4 Lesson
More informationTree House Escape. Design Challenge Learning. https://www.thetech.org/educators/design- challenge- learning
A frightened friend is stranded in a treehouse and needs help getting out! In this design challenge students explore how simple machines can make work easier while they design a device to retrieve their
More information3rd/4th Grade Science Unit: Forces and Motion. Melissa Gucker TE 804 Spring 2007
3rd/4th Grade Science Unit: Forces and Motion Melissa Gucker TE 804 Spring 2007 Part I: Learning Goals Documentation Unit Title: Forces and Motion Grade Level: 3 rd Designer: Melissa Gucker The Main Idea(s)/Importance
More informationWrite your answer to question 23 in the space provided on page _ of your Student Response Booklet.
Write your answer to question 23 in the space provided on page _ of your Student Response Booklet. 25907 OR F:4A Q:23 Sect:B Content:50 Linking Artid: 25907bike Bicycle Design Use the illustration of a
More informationUnit 4 Mechanical Systems Learning Pack (Science In Action 8)
1 2 Focus in Action UNIT LEARNING PACKS These booklets are designed to provide Grade 8 students with all the resources needed to review or reinforce concepts, covered in the Alberta Science Curriculum,
More information18974 (736) Singer No. 20-2. SINGER No. 20-2 ELECTRIC SEWING MACHINE INSTRUCTION MANUAL
SINGER No. 20-2 ELECTRIC SEWING MACHINE INSTRUCTION MANUAL Next Page Main Parts Accessories To start the Motor To Stop the Motor To Change the Speed Needles and Thread Relative Sizes of Needle and Thread
More informationName. Most of the bones of the limbs (arms & legs) act as levers. These levers are powered by muscles.
Bones as Levers 1 Name Bones as Levers You may not think of your limbs as being machines, but they are. The action of a muscle pulling on a bone often works like a type of simple machine called a lever.
More informationUnit 4 Practice Test: Rotational Motion
Unit 4 Practice Test: Rotational Motion Multiple Guess Identify the letter of the choice that best completes the statement or answers the question. 1. How would an angle in radians be converted to an angle
More informationF output. F input. F = Force in Newtons ( N ) d output. d = distance ( m )
Mechanical Advantage, Speed Ratio, Work and Efficiency Machines Make Work Easier Machines help people do things that they normally couldn t do on their own. Mechanical Advantage A machine makes work easier
More informationSimple Machines. Terri Wakild. South Haven Public Schools
Simple Machines Terri Wakild South Haven Public Schools April, 2006 Participant in Research Experience for Teachers (RET) Workshop at Western Michigan University 2005-06 Academic Year Simple Machines Grade
More informationTechnology Exploration-I
Technology Exploration-I PREPARED BY Academic Services August 2011 Applied Technology High Schools, 2011 Module Objectives After the completion of this module, the student should be able to: Identify pulleys.
More informationSimple Machines integrated Math & Science lessons
Simple Machines integrated Math & Science lessons Activities: Six Do it All Tilling with Tools Description: Students will learn the six simple machines that do it all! After, students will understand that
More informationBuild Your Own Solar Car Teach build learn renewable Energy! Page 1 of 1
Solar Car Teach build learn renewable Energy! Page 1 of 1 Background Not only is the sun a source of heat and light, it s a source of electricity too! Solar cells, also called photovoltaic cells, are used
More informationProperty of Science Playground ACTIVITY BOOKLET
Property of Science Playground ACTIVITY BOOKLET Table Contents Simple Machines Discovery Box Contents Introduction to the Discovery Boxes Directions for Using the Discovery Box Activity Booklet Teaching
More informationRoanoke Pinball Museum Key Concepts
Roanoke Pinball Museum Key Concepts What are Pinball Machines Made of? SOL 3.3 Many different materials are used to make a pinball machine: 1. Steel: The pinball is made of steel, so it has a lot of mass.
More informationForce, Work and Energy
Force, Work and Energy Reference Guide Equipment Setup Ropes and Pulleys.................................................................. 1 Investigation Guides A-1 Ropes and Pulleys................................................................
More informationUnit 8A: Systems in Action (Pg. 2 85) Chapter 2: Getting to Work (pg. 28 55)
Unit 8A: Systems in Action (Pg. 2 85) Chapter 2: Getting to Work (pg. 28 55) Name: Date: 2.1: Physical Systems: Simple Machines (Pg. 30 35): Read Pages 30-35. Answer the following questions on pg. 35:
More information3. Loosen 3 x grub screws in the Dec end cap and unscrew the cap and counterweight shaft. NEQ6 Belt Modification Kit.
NEQ6 Belt Modification Kit. Thank you for your purchase. Please read these instructions fully before fitting. Your package should contain 2 off 47 & 2 off 12 tooth aluminium pulleys 2 off belts 6mm wide
More informationRube-Goldberg devices and Simple Machines
Rube-Goldberg devices and Simple Machines Background for Teacher Reuben Lucius Goldberg was a famous cartoonist born in San Francisco in 1883. Many of his cartoons became popular for satirizing the so-called
More informationLesson Plans. Teacher: High School Physical Science Grade: 9th. Curricular Areas/s: Simple machines and mechanical advantages
Lesson Plans Teacher: High School Physical Science Grade: 9th Curricular Areas/s: Simple machines and mechanical advantages Standard/s: Understand and apply knowledge of motions and forces Objects change
More informationLinear Motion vs. Rotational Motion
Linear Motion vs. Rotational Motion Linear motion involves an object moving from one point to another in a straight line. Rotational motion involves an object rotating about an axis. Examples include a
More informationSIMPLE MACHINES MADE SIMPLE
SIMPLE MACHINES MADE SIMPLE Grade Level or Special Area: 2 nd Grade Science Written by: Jan Polzin, Lincoln Academy Charter School, Arvada, Colorado Length of Unit: 10 lessons (nine science and one writing,
More informationFitting Instructions Garador, Westland & Catnic Garage Door Spring Box Roller Wheels & Wall Bracket & Link Arm
Fitting Instructions for a Garador, Westland & Catnic Garage Door Spring Box Roller Wheels & Wall Bracket & Link Arm These instructions cover, how to replace a Spring Box Assembly to a Garador, Westland
More informationAPPENDIX A. Sets = the completion of one consecutive grouping of repetitions of an exercise.
Exercise Instruction Sheet Instructions: APPENDIX A Exercises are to be performed 3 times per week. Allow one rest day between each exercise day. You may divide the exercises into groups and perform them
More informationCHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationHP Laser Jet 4200/4240/4250/4300/4350 Swing Plate
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate 1 Swing Plate Assembly-RM1-0043 1 Swing Plate Kit-5851-2766 (RM1-0043 plus RM1-1091 gear) CAUTION: Fuser may be hot. Turn off printer, unplug it and allow
More informationLINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted
LINEAR ACTUATORS Linear Actuators Linear Actuators Linear Actuators are Actuators that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators
More informationQuestions: Does it always take the same amount of force to lift a load? Where should you press to lift a load with the least amount of force?
Lifting A Load 1 NAME LIFTING A LOAD Questions: Does it always take the same amount of force to lift a load? Where should you press to lift a load with the least amount of force? Background Information:
More informationActivity: Building a Catapult
Mechanical Engineering Activity: Building a Catapult In this activity, youth learn how to design and build a catapult that uses a pivot arm (lever) and a fulcrum to launch a Ping-Pong ball across the room.
More informationOperation of the overrun braking system.
Operation of the overrun braking system. Fig 1 The overrun device can be described as the control device of the overrun brake system. A draw-bar force is produced at the coupling point by reducing the
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationCOMBINATION SLAB & TRIM SAW INSTRUCTIONS 12, 14, & 16 MODELS
COMBINATION SLAB & TRIM SAW INSTRUCTIONS 12, 14, & 16 MODELS DESCRIPTION Covington s Combination Trim & Slab Saws are similar in design with different blade and pulley sizes. Sawing operations remain the
More informationMechanical Reasoning Test
Mechanical Reasoning Test Question 1 In the electrical circuit above, which light bulbs should be lit if Switch 1 is on and Switch 2 is off? ll should be off. b) All should be on. c) A, C & D should be
More information30 minutes in class, 2 hours to make the first time
Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12
More informationSTEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
More informationDIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
More informationCluster 3: Forces and Simple Machines
Grade 5 Cluster 3: Forces and Simple Machines Overview In this cluster, students increase their understanding of forces through the study of simple machines. Emphasis is placed on investigating a variety
More informationINGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT
D. L. Martin Company INGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT TYPICAL HYDRAULIC JACK HEAD ASSEMBLY 1 TOOLS REQUIRED: 1) Container to hold hydraulic fluid. 2) Clean rags and protective covers
More informationStudent Exploration: Pulleys
Name: Date: Student Exploration: Pulleys Vocabulary: effort, load, mechanical advantage, pulley, pulley system Prior Knowledge Questions (Do these BEFORE using the Gizmo.) 1. Suppose you had to haul a
More informationQuest for Speed. Discover Engineering. Youth Handouts
Discover Engineering Youth Handouts Activity 1: Spooling Around Name: Date: Materials List Wooden spool Nail Flat washer Rubber bands Craft stick Nut Tape measure Calculator Masking tape Procedure 1. To
More informationGEARS AND GEAR SYSTEMS
This file aims to introducing basic concepts of gears and pulleys. Areas covered include spur gears, compound gears, chain drive, rack/pinion systems and pulley systems. GEARS AND GEAR SYSTEMS Gears can
More informationLeft to His Own Devices
Left to His Own Devices Student A TASK ONE Sit with two other "A" students. What are the names of all the different items? Together with your group, write the words of these things. What are all of these
More informationSpaceActivities. Age 8+ Teacher s Notes. In collaboration with NASA
SpaceActivities Age 8+ Teacher s Notes In collaboration with NASA The Hammer Teaching Objectives: Technology/Engineering Using mechanisms Assembling components Combining materials Science Inclined planes
More informationChapter 8: Rotational Motion of Solid Objects
Chapter 8: Rotational Motion of Solid Objects 1. An isolated object is initially spinning at a constant speed. Then, although no external forces act upon it, its rotational speed increases. This must be
More informationTorque and Rotation. Physics
Torque and Rotation Physics Torque Force is the action that creates changes in linear motion. For rotational motion, the same force can cause very different results. A torque is an action that causes objects
More informationRopes and Pulleys Investigations. Level A Investigations. Level B Investigations
Ropes and Pulleys Investigations Level A Investigations Ropes and Pulleys How can you use the ropes and pulleys to lift large weights with small forces? In this Investigation, students learn to define
More informationLift the Load! Make a lever. Measure the amount of force needed to lift up a book when applying a force at different positions on the lever.
Lift the Load! Computer 28 The Greek philosopher Archimedes said, "Give me a lever long enough, and a place to stand and I can move the world." What did he mean by this? In this activity, you will get
More information