G-BH1. Data sheet 2BH Side channel blower. Performance curves. 50 Hz 60 Hz. 50 Hz 60 Hz. Suction capacity V [m³/h] 2/3 2/3

Transcription

1 G-BH Data sheet BH 6 Side channel blower Performance curves Vacuum operation Compressor operation Suction capacity V [m³/h] Hz 6 Hz / / Hz 6 Hz... Power consumption P at pump shaft [kw]... / / Temperature rise T of conveyed air [K] 8 6 / / The performance curves are based on air at a temperature of C and an atmospheric pressure of mbar with a tolerance of ± %. The total pressure differences are valid for suction and ambient temperature up to C. For other conditions please get in touch wit h us. Every G-BH pump can be used both as vacuum pump and compressor in continuous operation over the total performance curve range. The motors are available as standard in protection category IP and insulation class F. The vacuum pumps / compressors are UL and CSA approved. Gardner Denver Deutschland GmbH Technical data sheet - Edition /

2 Selection and ordering data Type BH 6 No. Frequency Rated Max. differential pressure ) Voltage ) Current Power Vacuum Pressure Hz V A kw mbar ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) - / - Y 8. /.9 Y / 8-8 Y 8.8 /. Y / - Y 9.7 /.6 Y / 8-8 Y. / 6. Y / - Y. / 7. Y / 8-8 Y.6 / 7. Y ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) ~ Hz, IP, Insulation material class F, with attached capacitor for cont. operation Sound pressure level ) Weight Approx. db(a) kg BH6-7AH6 BH6-7AH7 6 Order No. 6 BH6-7AH6 9 BH6-7AH6 BH6-7AC 9 BH6-7AC BH6-7AC BH6-7AC BH6-7AA ) In case of frequency converter operation the standard motor insulation system is suitable for converter input voltages up to 6 V. ) Relief valves available for limiting differential pressure. ) Measuring surface sound pressure level acc. to EN ISO 7, measured with an equivalent unit at a distance of m. The pump is throttled to an average suction pressure, with piping connected, but no relief valves fitted, tolerance ± db (A). All G-BH fulfil the 6//EC (machinery) and 6/9/EC (low voltage) directives and the EN 6- norm Rotating electrical machines. Hz Hz voltage range 6 Hz voltage range ~ The motors comply with EN 6 - / - / - (IEC 6) and thermal class F. For three phase motors tolerances are +/-% for fixed voltage motors and +/-% for voltage range motors. Single phase machines are designed with a +/- % tolerance. The frequency tolerance is +/- % maximum. Other voltages BH V / - 9 V Y - V / - V Y H V / - V Y - 7 V / 8-8 V Y 8 V H V 8-8 V H V 7 V C ~ ) ~ ) 86 Hz ( rpm) V / V Y 8 - V / - V Y - 7 V / - 8 V Y P V Y - V Y - 6 V Y P V - V - 6 V P V / V Y - 6 V / - V Y - 9 V / - V Y V P 6 V / 69 V Y - V / 6-7 V Y - V / 69-7 V Y P 7 ) Performance can differ if high effiiciency motors are used. Please refer to corresponding data sheets. Changes in particular of the quoted performance curve, data and weights may occur without prior notice. The data given do not constitute an obligation from our side to deliver as shown. Elmo Rietschle is a brand of Gardner Denver's Industrial Products Group and part of Blower Operations Gardner Denver Schopfheim GmbH Roggenbachstraße Schopfheim - Germany Gardner Denver Deutschland GmbH Industriestraße Bad Neustadt - Germany er.de@gardnerdenver.com Tel.: Tel.: Fax: Fax:

3 G-BH Data sheet BH 6 Side channel blower Performance curves Vacuum operation Compressor operation 6 Hz 6 Hz Hz 6 Hz Suction capacity V [m³/h] Power consumption P at pump shaft [kw] Temperature rise T of conveyed air [K] The performance curves are based on air at a temperature of C and an atmospheric pressure of mbar with a tolerance of ± %. The total pressure differences are valid for suction and ambient temperature up to C. For other conditions please get in touch wit h us. Every G-BH pump can be used both as vacuum pump and compressor in continuous operation over the total performance curve range. The motors are available as standard in protection category IP and insulation class F. The vacuum pumps / compressors are UL and CSA approved. Gardner Denver Deutschland GmbH Technical data sheet - Edition /

4 Selection and ordering data Type BH 6 No. Frequency Rated Max. differential Sound Weight pressure ) pressure Approx. Voltage ) Current Power Vacuum Pressure level ) Hz V A kw mbar db(a) kg ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) - / - Y 8. /.9 Y / 8-8 Y 8.8 /. Y / - Y 9.7 /.6 Y / 8-8 Y. / 6. Y / - Y. / 7. Y / 8-8 Y.6 / 7. Y ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) Order No. 6 BH6-7AH6 ) 9 BH6-7AH6 ) BH6-7AH6 ) BH6-7AH7 ) 6 BH6-7AC ) 9 BH6-7AC ) BH6-7AC ) BH6-7AC ) ) In case of frequency converter operation the standard motor insulation system is suitable for converter input voltages up to 6 V. ) Relief valves available for limiting differential pressure. ) Measuring surface sound pressure level acc. to EN ISO 7, measured with an equivalent unit at a distance of m. The pump is throttled to an average suction pressure, with piping connected, but no relief valves fitted, tolerance ± db (A). ) Order number for suction port at the blower cover: BH6-7EH All G-BH fulfil the 6//EC (machinery) and 6/9/EC (low voltage) directives and the EN 6- norm Rotating electrical machines. The motors comply with EN 6 - / - / - (IEC 6) and thermal class F. For three phase motors tolerances are +/-% for fixed voltage motors and +/-% for voltage range motors. Single phase machines are designed with a +/- % tolerance. The frequency tolerance is +/- % maximum. Other voltages Hz Hz voltage range 6 Hz voltage range ~ BH V / - 9 V Y - V / - V Y H V / - V Y - 7 V / 8-8 V Y 8 V H V 8-8 V H V 7 V C ~ ) ~ ) 86 Hz ( rpm) V / V Y 8 - V / - V Y - 7 V / - 8 V Y P V Y - V Y - 6 V Y P V - V - 6 V P V / V Y - 6 V / - V Y - 9 V / - V Y V P 6 V / 69 V Y - V / 6-7 V Y - V / 69-7 V Y P 7 ) Performance can differ if high effiiciency motors are used. Please refer to corresponding data sheets. Changes in particular of the quoted performance curve, data and weights may occur without prior notice. The data given do not constitute an obligation from our side to deliver as shown. Elmo Rietschle is a brand of Gardner Denver's Industrial Products Group and part of Blower Operations Gardner Denver Schopfheim GmbH Roggenbachstraße Schopfheim - Germany Gardner Denver Deutschland GmbH Industriestraße Bad Neustadt - Germany er.de@gardnerdenver.com Tel.: Tel.: Fax: Fax:

5 G-BH Data sheet BH 6 Side channel blower Performance curves Vacuum operation Compressor operation 7 6 Hz 6 Hz Hz 6 Hz Suction capacity V [m³/h] / 7 Power consumption P at pump shaft [kw] 8 6 / 7 / Temperature rise T of conveyed air [K] The performance curves are based on air at a temperature of C and an atmospheric pressure of mbar with a tolerance of ± %. The total pressure differences are valid for suction and ambient temperature up to C. For other conditions please get in touch wit h us. Every G-BH pump can be used both as vacuum pump and compressor in continuous operation over the total performance curve range. The motors are available as standard in protection category IP and insulation class F. The vacuum pumps / compressors are UL and CSA approved. Gardner Denver Deutschland GmbH Technical data sheet - Edition /

6 Selection and ordering data Type BH 6 No. Frequency Rated Max. differential pressure ) Voltage ) Current Power Vacuum Pressure Hz V A kw mbar ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) ~ /6 Hz, IP, Insulation material class F, UL 7 and CSA. No (certificate number E9) Sound pressure level ) Weight Approx. db(a) kg 7 BH6-7GH7 86 BH6-7GH7 7 Order No. BH6-7GH7 BH6-7GC BH6-7GC 86 BH6-7GC ) In case of frequency converter operation the standard motor insulation system is suitable for converter input voltages up to 6 V. ) Relief valves available for limiting differential pressure. ) Measuring surface sound pressure level acc. to EN ISO 7, measured with an equivalent unit at a distance of m. The pump is throttled to an average suction pressure, with piping connected, but no relief valves fitted, tolerance ± db (A). All G-BH fulfil the 6//EC (machinery) and 6/9/EC (low voltage) directives and the EN 6- norm Rotating electrical machines. ~ The motors comply with EN 6 - / - / - (IEC 6) and thermal class F. For three phase motors tolerances are +/-% for fixed voltage motors and +/-% for voltage range motors. Single phase machines are designed with a +/- % tolerance. The frequency tolerance is +/- % maximum. Other voltages Hz Hz voltage range 6 Hz voltage range BH V / - 9 V Y - V / - V Y H V / - V Y - 7 V / 8-8 V Y 8 V H V 8-8 V H V 7 V C ~ ) ~ ) 86 Hz ( rpm) V / V Y 8 - V / - V Y - 7 V / - 8 V Y P V - V - 6 V P V / V Y - 6 V / - V Y - 9 V / - V Y V P 6 V / 69 V Y - V / 6-7 V Y - V / 69-7 V Y P 7 ) Performance can differ if high effiiciency motors are used. Please refer to corresponding data sheets. Changes in particular of the quoted performance curve, data and weights may occur without prior notice. The data given do not constitute an obligation from our side to deliver as shown. Elmo Rietschle is a brand of Gardner Denver's Industrial Products Group and part of Blower Operations Gardner Denver Schopfheim GmbH Roggenbachstraße Schopfheim - Germany Gardner Denver Deutschland GmbH Industriestraße Bad Neustadt - Germany er.de@gardnerdenver.com Tel.: Tel.: Fax: Fax: