DISPERMAT CV & LC High Speed Dispersers DISPERMAT CV quarts (50-5,000 ml) quarts (50-5,000 ml) quarts (50-5,000 ml)

Transcription

1 DISPERMAT CV & LC High Speed Dispersers DISPERMAT CV HIGH SPEED LABORATORY DISPERSERS The CV product line offers the most capability for your laboratory dispersing requirements. Mill base quantities from less than 1 pint up to 2.5 gallons (10 liters) can be dispersed. The CV models have a flexible design that can be converted by accessory options to perform media milling, dispersing under vacuum, or homogenization by a rotor-stator. The most current safety device features can be added to the CV models to maximize a safe operating environment. DISPERSION The CV models have a compact design to save on bench space. The motor design provides a quiet, low maintenance operation. A temperature sensor with automatic shutdown prevents the motor from over-heating Precise constant speed control for repeatable results Counter weight stand for easy up/down movement of the motor Simple and quiet operation Optional mill base temperature measurement readout The CV panel displays the important dispersion parameters for a consistent result. Display of speed, %Torque, Product temperature, Timer Adaptive turn sensitive speed control Timer function with display of pre-selected time or elapsed time Timer control to a second pre-programmed speed Note: Container must be ordered separately Comes complete with: Control box Operating Manual Impellers: 25, 30, 40, 50 mm (CV-4 will also include a 60 mm) Cat. No. Description Motor Power MX-B1432 MX-B1433 MX-B1434 MX-B1456 MX-B1279 MX-B1280 CV3 Plus, 115V CV3 Plus, 115V CV3 Plus, 220V CV3 Plus, 220V CV4, 115V CV4, 220V 1.0 hp (0.75 kw) 1.0 hp (0.75 kw) 1.0 hp (0.75 kw) 1.0 hp (0.75 kw) 2.0 hp (1.5 kw) 2.0 hp (1.5 kw) Speed rpm 0-20, , , , , , Torque Product Volume* Clamping system quarts (50-5,000 ml) quarts (50-5,000 ml) quarts (50-5,000 ml) quarts (50-5,000 ml) quarts (50-10,000 ml) quarts (50-10,000 ml) Safety Device Heavy Duty Clamps Safety Device Heavy Duty Clamps Safety Device Safety Device Weight 121 lbs (55 kg) 110 lbs (50 kg) 121 lbs (55 kg) 110 lbs (50 kg) 176 lbs (80 kg) 176 lbs (80 kg) Stand Base Price BK1 $12, BK1 11, BK1 12, BK1 10, BK2G 17, BK2G 16, *Product volumes are based on mill base viscosity below 3,000 centipoise 1

2 High Speed Dispersers DISPERMAT LC The LC Series offers an economical design for small laboratory volumes to pilot plant volumes up to 10 gallon capacity. The motor design provides a quiet, low maintenance operation. A temperature sensor with automatic shutdown prevents the motor from over-heating. The LC stand comes with a heavy-duty clamping system to firmly hold the container. The larger LC models have a safety stand that comply with the European machine law standard. The design can accommodate accessories that can convert the LC model to a media mill or a vacuum dispersing system. Cat. No. Description Price MX-B1440 LC30, 115V, w/cont. clamp $6, MX-B1441 LC30, 220V, w/cont. clamp 6, MX-B1442 LC55, 115V, w/ safety dev. 9, MX-B1443 LC55, 115V, w/cont. clamp 8, MX-B1444 LC55, 220V, w/safety dev. 9, MX-B1445 LC55, 220V, w/cont. clamp 7, MX-B1416 LC75, 220V, w/cont. clamp 8, MX-B1417 LC75, 220V, w/safety dev. 10, MX-B1418 LC110-12, 220V, w/safety dev. 11, MX-B1419 LC110-6, 220V, w/safety dev. 11, MX-B1281 LC220-12, 400V, w/safety dev. 13, MX-B1285 LC220-6, 400V, w/safety dev. 13, MX-B1293 LC300, 400V, w/safety dev. 17, MX-B1294 LC400, 400V, w/safety dev. 18, Cat. No. Motor Power Speed (rpm) Note: The container and shaft protection pipe must be ordered separately. Simple and quiet operation Durable design for long-term operation Constant speed control for repeatable results Keeps a constant speed even when the viscosity changes Timer function to track dispersion run time Comes complete with:, Control box, Operating Manual, Impellers *Product volumes are based on mill base viscosity below 3,000 centipose Product Volume* Impellers (mm) Stand Base Weight MX-B hp (0.3 kw) 0-20, quarts (50-1,000 ml) 25, 30, 40, 50 H1 42 lbs (19 kg) MX-B hp (0.3 kw) 0-20, quarts (50-1,000 ml) 25, 30, 40, 50 H1 42 lbs (19 kg) MX-B hp (0.55 kw) 0-20, quarts (50-3,000 ml) 25, 30, 40, 50 H1 77 lbs (35 kg) MX-B hp (0.55 kw) 0-20, quarts (50-3,000 ml) 25, 30, 40, 50 H1 66 lbs (30 kg) MX-B hp (0.55 kw) 0-20, quarts (50-3,000 ml) 25, 30, 40, 50 H1 77 lbs (35 kg) MX-B hp (0.55 kw) 0-20, quarts (50-3,000 ml) 25, 30, 40, 50 H1 66 lbs (30 kg) MX-B hp (0.75 kw) 0-20, quarts (50-5,000 ml) 25, 30, 40, 50 H1 93lbs (42 kg) MX-B hp (0.75 kw) 0-20, quarts (50-5,000 ml) 25, 30, 40, 50 H1 99 lbs (45 kg) MX-B hp (1.1 kw) 0-12, quarts (50-10,000 ml) 60 BK2G 198 lbs (90 kg) MX-B hp (1.1 kw) 0-6, quarts (1,500-15,000 ml) 60 BK2G 198 lbs (90 kg) MX-B hp (2.2 kw) 0-12, quarts (50-20,000 ml) 60 BK2G 242 lbs (110 kg) MX-B hp (2.2 kw) 0-6, quarts (1,500-25,000 ml) 60 BK2G 242 lbs (110 kg) MX-B hp (3.0 kw) 0-6, quarts (1,500-30,000 ml) 80 BK2G 330 lbs (150 kg) MX-B hp (4.0 kw) 0-6, quarts (1,500-40,000 ml) 90 BK2G 374 lbs (170 kg) 2

3 CV3 Plus with safety device Digital speed indicator, time and % torque Optional temperature readout with PT100 purchase Timer function that can auto-adjust to a slower speed LC55 with safety device Digital speed indicator Adaptive turn sensitive speed adjustment Timer function with auto-shutdown LC30 with APS system The APS accessory is a media milling system Interchangeable with the vacuum accessory (CDS) Ideal for small volumes to minimize disposal cost CV3 Plus with CDS system The CDS accessory is a vacuum system that prevents air entrapment during the dispersion process. NOTE: Container must be ordered separately 3

4 DISPERMAT CN HIGH SPEED DISSOLVERS CN is a New Dissolver with the Electronics Built into the Motor - no separate power box. The Dispersion CN is designed to give you maximum performance at a low price. It is an excellent dissolver for dispersing small to medium size quantities of varying viscosities. Compact stand with safety device and electrical height adjustment - uses very little space Compact drive unit contains the strong 3-phase motor along with a separately driven low noise ventilation system - you hardly know it is running. The central clamping system securely holds the container in place in the proper position and automatically centers it with the dissolver - no guesswork necessary The conveniently located control box features the following: 1. ON/OFF switch (all models) 2. Safety and error signal lights 3. An emergency stop button 4. A digital display of RPM that is infinitely variable from 0-11,000 rpm and % torque 5. A dual display digital timer that enables the dispersion time to be pre-set with automatic shut-off Choose from 2 models: 1. CN 10: typical performance of 10 kg (medium viscosity) to 6 kg (high viscosity) of product 2. CN 20: typical performance of 20 kg (medium viscosity) to 10kg (high viscosity) of product Technical Specifications Model Power Voltage Speed Torque Impellers Stand Weight CN hp 230 VAC / 0 to mm H2L 220 lbs (1.1 kw) 50 Hz 11,000 rpm (100 kg) CN hp 3-phase* 0 to mm H2L 242 lbs (2.2 kw) 11,000 rpm (110 kg) Instrument Dimensions Stand H2G Stand H2L Height 51.2 in (1300 mm) in Depth 19.3 in (490 mm) 21.6 in Width 25.2 in (640 mm) 19.2 in Container H2G Container H2L Diameter in in ( mm) ( mm) Height 15.9 in (400 mm) 17.7 in * Standard 3-phase voltage is 400 VAC/50/60 Hz, any other voltage is available on request. MX-B1650 CN , MX-B1651 CN , Comes complete with:, Safety device, Central clamping system, SS telescopic shaft protection pipe, 2 safety limit switches, Impeller, Operating instructions. 4

5 STAINLESS STEEL DOUBLE WALL TEMPERATURE CONTROL CONTAINERS In the laboratory and pilot plant it is often necessary to process material at defined temperatures; for example during dispersing, stirring and exothermic reactions it is often preferable to remove excess heat. Other applications may require heat to be added. The high-quality double wall temperature control containers are ideal for these and other applications. They are available in many sizes and models. The stainless steel containers can be cleaned very easily due to their polished surface. The containers up to 5000 ml have self-sealing quick connect/disconnect fittings (ordered separatelty MX-B1257, MX-B1258 or MX-B1277) guaranteeing easy handling and time saving cleaning. Self-Sealing valves on the coupling and hose prevent leakage. The 10 to 65 litres double wall containers are equipped with standard hose fittings to enable heating or cooling. Stainless steel covers or split covers are available for all containers. PRICE Cat No. Capacity Inside x height Price MX-B ml 40 x 50 mm 1, MX-B ml 50 x 70 mm 1, MX-B ml 65 x 85 mm 1, MX-B ml 80 x 110 mm 1, MX-B ml 100 x 130 mm 2, MX-B ml 120 x 180 mm 2, MX-B ml 140 x 200 mm 3, MX-B ml 180 x 200 mm 3, MX-B liter 24 x 24 cm 4, MX-B liter 32 x 32 cm 6, MX-B liter 44 x 44 cm 9, MX-B1257* Quick Coupler for attaching tubing for ml vessels MX-B1258* Quick Coupler for attaching tubing for ml vessels MX-B1277* Hose Fittings for MX-B1270 to MX-B * Please note 2 couplers/ fittings are needed per vessel Single wall containers & additional accessories available - Depending on application Please Call for Pricing 5

6 STIRRING, MILLING AND DISPERSION IMPELLERS HEAVY DUTY DISPERSION IMPELLERS stainless steel, with tooth profile, 5mm hole and thumb screw. Sizes available: 30, 40,50 and 60. Sizes available: 70, 80, 90, 100, 125 and 150 mm Ø 250 mm with thread hub and female screw. PEARL MILL IMPELLER MC 25 Diameter Ø 60 mm Height 42 mm Impeller Ø 40 mm LIGHTWEIGHT DISPERSION IMPELLERS: stainless steel sizes available: 20, 25, 30, 40, 50 and 60 mm Ø MINI PEARL MILL IMPELLER Diameter Ø 40 mm Height 30 mm Impeller Ø 25 mm HEAVY DUTY PROPELLER BLADES stainless steel Sizes available: 40, 55, 80, 90, 105 and 125 mm Ø MICRO PEARL MILL IMPELLER Total Ø 28 mm Height 17 mm Impeller Ø 19 mm LIGHTWEIGHT PROPELLER BLADES stainless steel Sizes available: 50, 70 and 100 mm Ø EMS SINGLE TEFLON IMPELLERS (fixing device required). available in 6 different sizes HOMOGENIZER Stainless steel Strator-Rotor-System for dispersing low viscosity substances DMS DOUBLE MILLING IMPELLER made of polyamide, available in 7 different sizes 6

7 PRICE DISPERSION HEAVY-DUTY DISPERSION IMPELLERS CAT. # DIAMETER ATTACHMENT PRICE MX-B MM THUMB SCREW $ MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* LIGHT-WEIGHT DISPERSION IMPELLERS MX-B MM THUMB SCREW $87.00 MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM THUMB SCREW HEAVY-DUTY PROPELLER BLADES MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* MX-B MM HUB WITH FEMALE SCREW* LIGHT-WEIGHT PROPELLER BLADES MX-B MM THUMB SCREW MX-B MM THUMB SCREW MX-B MM THUMB SCREW * Not recommended for smaller s (LC,N1, F1,CV, FE) Attached to the by taking off the conical piece at the end of the shaft 7

8 PEARL MILL IMPELLERS CAT. # DIAMETER HEIGHT DISC CONTAINER MILLING PRICE DIA. CAPACITY BEADS MC 25 MX-B MM 42MM 40MM 500ML APPROX. 200ML $ MINI MX-B MM 30MM 25MM 250ML APPROX. 100ML MICRO MX-B MM 17MM 19MM 125ML APPROX. 50ML EMS MILLING IMPELLERS CAT. # MODEL DIAMETER HEIGHT CONTAINER MILLING PRICE CAPACITY BEADS MX-B1212 EMS T20* 20MM 5MM 30ML APPROX. 12ML $ MX-B1213 EMS T30* 30MM 5MM 125ML APPROX. 50ML MX-B1214 EMS T45* 45MM 5MM 250ML APPROX. 100ML MX-B1215 EMS T60* 60MM 5MM 500ML APPROX. 200ML MX-B1216 EMS T75* 75MM 5MM 1000ML APPROX. 400ML MX-B1236 EMS T90 90MM 5MM 2000ML APPROX. 800ML *Adapter fixing device needs to be ordered separately ADAPTER FIXING DEVICE CAT. # DESCRIPTION PRICE MX-B1217 ADAPTER FIXING DEVICE FOR MODELS EMS T20 - T75 $ BEADS - Need to be ordered separately CAT. # DESCRIPTION SIZE WEIGHT PRICE MX-B1232 GLASS BEADS 2MM Ø 1kg $ MX-B1233 ZIRCONIA BEADS 1.6 TO 2.5MM Ø 1kg DMS MILLING IMPELLERS CAT. # MODEL DIAMETER HEIGHT CONTAINER MILLING PRICE CAPACITY BEADS MX-B1315 DMS 28 28MM 22MM 50ML APPROX. 20ML $ MX-B1316 DMS 32 32MM 30MM 125ML APPROX. 50ML MX-B1237 DMS 45 45MM 38MM 250ML APPROX. 100ML MX-B1238 DMS 60 60MM 50MM 500ML APPROX. 200ML MX-B1239 DMS 70 70MM 58MM 1000ML APPROX. 400ML MX-B1249 DMS 80 80MM 85MM 2000ML APPROX. 800ML MX-B1247 DMS MM 95MM 3000ML APPROX.1200ML Ask about other products. 8