Metal and plastic processing

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Metal and plastic processing"

Transcription

1 SN DECO Group is your partner for thin-walled, roll-formed profiles. Our production range comprises of various structural profiles, primarily for privacy and sun protection as well as interior decoration. The manufacture of plastic parts in our injection moulding department, and the coating of plastic parts with functional or decorative surfaces complete our comprehensive range of services. Metal and plastic processing SN DECO Group manufactures thin-wall roll-formed profiles at thicknesses of 0.3mm to 1.5mm. Shiny, galvanised, painted, specially coated and electrolytically refined tapes are used. A large range of customer profiles of various shapes and lengths is manufactured with the help of modern profiling or laser welding systems. Our excellent technical requirements enable us to develop new innovative profiles of prototypes from the pilot run up to the point where they make it into the market, all in as little time as possible. With two modern intrusion systems, steel profiles of diameters 9mm to 28mm are plastic-coated. We manufacture plastic components for interior decoration, visual and solar protection and a range of other industrial purposes with the help of computer-assisted molding machines with clamping forces of tonnes. From the injection molding up until the functional or decorative surface finishing, we are able to offer excellent quality from a single source. OPEN PROFILES Slotted pipe diameter 10 / 11.5mm U-rails C-rails Top rails Bottom rails Use of various material types and grades According to RAL colours, film-coated, electrolytically refined surface Delivered in fixed and stock lengths CLOSED PROFILES Seam pipes Diameter 20 / 25 / 27.5 / 28 / 36 / 42mm As per RAL colours, film-coated, electrolytically refined surface Supplied in fixed and stock lengths Laser-welded pipes Pipe diameter 17.5 / 27mm Square steel pipe 30 x 20 x 1mm Galvanised, shiny Supplied in fixed and stock lengths PLASTIC COATING TUBES Tube in diameters 10 / 13 / 16 / 20 / 25 / 28mm Bright or galvanized steel pipes with plastic coating on PP Basis Extrusion coat in various colour combinations or according to RAL colour guides

2 PRIVACY AND SUN SCREENING Spezifications Rollerblind shafts 17.5 / 25 / 27.5 / 28 / 36 / 42mm in diameter with or without double-sided tape band Top bar, bottom bar, C-bar Ballast bars of 10mm diameter Worked in various types and grades of materials Supplied in ordered and stock lengths(300mm 6000mm). Fittings Spring mechanism Blind operating mechanism Bead chains End plugs PROFILING Key data 6 profiling lines with CNC monitoring Lengths of 300mm to 6000mm deliverable Technical description The profiling, also referred to as roll profiling, roll forming or cold rolling of profiles, is a continuous bending process where the material to be treated is shaped step by step to the required final cross section by a given number of profiling stations. LASER WELDING

3 Key data High output CO2 laser welding system with edge processing Flying servo-controlled cutting machine with saw Technical description Laser welding allows for continous operation joining. The small-scale melting causes the rising of thin, narrow welds. The profile is reshaped by a reel profile system. PLASTICS TECHNOLOGY Key data Injection machines of the company Boy with computer-assisted machine control Output of 30 to 90 tonnes Shot weight of 2g to 180g Manufacture of plastic parts with and without surface treatment (metallising, lacquering) Extrusion system with application rate of 25kg/h Cutting without sink marks

4 Steel tube 42 mm No white white 9 mm white 12 mm white 15 mm Steel tube 36 mm No Profiling and extrusion - Steel tubes white white 9 mm white 12 mm white 15 mm

5 Steel tube extruded with PVC cover 28 mm No white brown cherry beige black - Steel tube 28 mm No white white 9 mm white 12 mm white 15 mm Profiling and extrusion - Steel tubes

6 Steel tube 27 mm No white white 9 mm white 12 mm white 15 mm Profiling and extrusion - Steel tubes Steel tube welded 27 mm galvanized No galvanized -

7 Steel tube 25 mm No white white 9 mm white 12 mm white 15 mm Steel tube 25 mm galvanized No galvanized galvanized 9 mm galvanized 12 mm galvanized 15 mm Profiling and extrusion - Steel tubes

8 Steel tube welded 17.5 mm galvanized No galvanized galvanized 9 mm Profiling and extrusion - Steel tubes Steel tube with white PVC cover 10 mm No white -

9 Bottom rail 5x25 mm No Code Colors Sizes white silver matt galvanized 4000 mm Head rail 19x27 mm No Code Colors Sizes white silver matt galvanized C-Bottom rail 10x25 mm Code Colors Sizes white silver matt galvanized 4000 mm 4000 mm No Profiling and extrusion - Rails

10 Founded in 2008, SC PLAST DNP SRL is part of the SN DECO group and specializes in plastic processing by extrusion, mould manufacturing and maintenance. We produce extruded profiles for different industries: automotive, interior design, construction industry, furniture industry. Currently we can extrude the following materials : PVC, PE, PP, ABS. PLAST DNP has developed considerably since the beginning of its activity due to constant investments in new machinery and equipment. Currently we have 5 extrusion lines for PVC, PE, PP, ABS and various equipment for mould machining / manufacturing. We can offer you: PLASTIC PROCESSING BY EXTRUSION AND INJECTION A wide range of extruded PVC, PP or PE; Extrusion and injection moulds design and manufacture ; Assembly operations;

11 EXTRUDED PROFILES On our extrusion lines we produce large series of profiles for our customers, from different materials: rigid PVC, plasticized PVC, PE, PP, ABS. We advise our partners from the early stage of the profile/ extrusion die design, to the start of the pilot production. The majority of our production consists in ceiling curtain rails manufacture. We have a range of 8 models with 1,2 or 3 ways. We sell our products in the domestic market, as well as in countries like England, Germany, Belgium, France. Our customers were convinced of the quality of our products, our promptness, offered at a very competitive price.

12 Mold Design and manufacture In our workshop we are able to manufacture molds for plastic injection and extrusion. We have the latest CNC machines, able to satisfy our clients requirements in terms of mould production : CNC and universal milling machines, EDM, lathes, etc. Plastic Profiles extrusion We offer custom plastic extrusion, as per customer requirements. With our extrusion lines, we can extrude various materials: rigid PVC, plasticized PVC, PP, PE, with widths up to 400 mm. We have equipment that can apply foil of any color or texture on plastic profiles, as well as performance industrial profile printers. To get you an accurate quote we need the following information: If the extrusion mould already exists Estimated production / year Type of material Place of delivery

Rapid Prototyping Technologies. May, 2016

Rapid Prototyping Technologies. May, 2016 Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

NORTHFIELD METAL PRODUCTS

NORTHFIELD METAL PRODUCTS NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Introduction to M G Metals

Introduction to M G Metals Introduction to M G Metals M G Metals have over 50 years experience in the metal industry with a dedicated sales team trained in design, production and stockholding. We specialise in sales and customer

More information

SMT Assembly. Machining

SMT Assembly. Machining SMT Assembly Machining Production of Plastics Parts LUMEL s Offer in the Scope of SMT Assembly and Precision Engineering LUMEL S.A. experience and competence For over 53 years, LUMEL S.A. is well-known

More information

BAUER Manufacturing Inc.

BAUER Manufacturing Inc. BAUER Manufacturing Inc. Conroe, Texas Supplying Equipment and Services to Industry 2/2013 BAUER Manufacturing Inc. BAUER Manufacturing Inc. (BMC) is located in the City of Conroe, Texas, approximately

More information

DEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1

DEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1 DEMIRSAN The foundation of our company had laid as a lathe workshop by Mr. Bekir Demir, in Karabağlar, at 1972 that had continue to operate in this way for a long time.after that our General Manager Mr.

More information

Vertical blinds. Model V-ABS-M. Manually operated vertical blinds ABS-M 89, 127, 250mm. Interior shading

Vertical blinds. Model V-ABS-M. Manually operated vertical blinds ABS-M 89, 127, 250mm. Interior shading Interior shading Vertical blinds Model V-ABS-M Manually operated vertical blinds ABS-M 89, 127, 250mm Vertical blinds shading systems with chain and cord mechanism The Optima V-ABS vertical blinds system

More information

Facade awnings from Griesser. Galleria

Facade awnings from Griesser. Galleria Facade awnings from Griesser. Galleria min. 700 mm max. 3500 mm min. 1100 mm max. 3500 mm max. 8 m 2, single awning max. 12/18 m 2, connected systems, depending on version Sliding-arm awning for versatile

More information

HOME RESEARCH & DEVELOPMENT SECTORS WHY PROFILES STEEL STRIP & PLATES LOGISTICAL SERVICES. Presentation. Europe. Quality.

HOME RESEARCH & DEVELOPMENT SECTORS WHY PROFILES STEEL STRIP & PLATES LOGISTICAL SERVICES. Presentation. Europe. Quality. HOME SECTORS Presentation Europe PROFILES WHY Quality United States STEEL STRIP & PLATES SERVICES Finishing Ethiopia CUSTOM-MADE PROFILES INNOVATIVE EXPERTISE Always the best one-stop-shopping solution

More information

TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES

TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES www.pentregroup.com HEARL HEATON ABS Plastic Flanged Process Reels HEARL HEATON, with over 40 years of experience, is the recognised leader in the design and

More information

FLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS

FLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL

More information

Extrusions ProCEssinG

Extrusions ProCEssinG Extrusions PROCESSING A POWERFUL GROUP ALUMERO extrusions provide long-lasting profile solutions for innovative ideas. We believe it is our job and our duty to provide individual advice in close cooperation

More information

Canal Compact Canal Plus

Canal Compact Canal Plus anal ompact anal Plus 1 2 3 1. omplete anal Plus underfloor unit 2. Heat exchanger and inside finish of the duct in dark grey 3. Enlarged range of grilles anal Plus Operating principal Options Flexible

More information

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems.

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems. 01211231 Conventional and Computer-Controlled Machines 3 (3-0) Prerequisite : 01208281 Conventional machine for tools: turning, drilling, tapping, milling, grinding, cutting, punching, boring and bending;

More information

VERTICAL BLINDS - Product Overview

VERTICAL BLINDS - Product Overview Window VERTICAL BLINDS - Product Overview Product Overview Our robust vertical blind system features a rust free extruded aluminium powder coated head rail. The head rail is fixed in place using a spring

More information

Your Plastics Technology Partner

Your Plastics Technology Partner Your Plastics Technology Partner talbottechnologies.co.nz .3 Talbot Technologies is the outcome of an amalgamation of world class technical injection moulder Talbot Plastics (Established 1972), with innovative

More information

metal Fabrication 1966 moyer Ave Box 579 elkhart, in Fax

metal Fabrication 1966 moyer Ave Box 579 elkhart, in Fax Metal Fabrication MOR/ryde Metal Fabrication Overview Since its inception in 1966, MOR/ryde has built a reputation for outstanding customer service in every area of its business. MOR/ryde s Metal Fabrication

More information

MODEL HSR-007 Direct Drive Rolling Steel

MODEL HSR-007 Direct Drive Rolling Steel MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007

More information

PUTTING OUR EXPERIENCE BEHIND YOU

PUTTING OUR EXPERIENCE BEHIND YOU PUTTING OUR EXPERIENCE BEHIND YOU PRECISION ENGINEERED apex ALUMINIUM EXTRUSIONS Apex Aluminium Extrusion Pvt. Ltd. is one of the fastest-growing manufacturer of premium-quality aluminium extrusions. The

More information

COMPANY OVERVIEW. International Sourcing Tooling Management Design & Product Engineering Rapid Prototyping Supply Chain Management

COMPANY OVERVIEW. International Sourcing Tooling Management Design & Product Engineering Rapid Prototyping Supply Chain Management COMPANY OVERVIEW COMPANY OVERVIEW SINO INTERNATIONAL PRODUCTS import, manufacture, assemble and supply components to the automotive, rail and other industrial sectors Warwick Office United Kingdom Shanghai

More information

building applications copper - redefined

building applications copper - redefined building applications copper - redefined copper - redefined The task The development of an innovative tube for the future: economical, environmentally friendly, ecological, completely safe and easy to

More information

Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,

Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574

More information

The Warm Edge for insulating glass

The Warm Edge for insulating glass The Warm Edge for insulating glass 1. 3. SGGSWISSPACER 2. 4. The best product on the market by quite an edge Energy saving Lower heating costs through better insulation: the thermally improved spacer SGG

More information

1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as

1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as History 1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as concern company 1991 - change to joint-stock

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

Rolling - Introductory concepts

Rolling - Introductory concepts Rolling - Introductory concepts R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Rolling -

More information

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041 CONSTRUCTION 1. A. GENERAL 1.A.1. The intent of this specification is to set forth construction and design standards that will result in an installation of modular cabinetry requiring FLUSH OVERLAY CONSTRUCTION.

More information

Facade awnings from Griesser. Sigara

Facade awnings from Griesser. Sigara Facade awnings from Griesser. Sigara min. 400 mm, manual drive min. 700 mm motor drive max. 3500 mm, guide rails max. 4000 mm, guide cable or slat min. 400 mm max. 3500 mm, guide rails max. 4000 mm, guide

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

BOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.

BOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping. BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel

More information

SECTION 02832 CHAIN LINK FENCE AND GATES

SECTION 02832 CHAIN LINK FENCE AND GATES SECTION 02832 CHAIN LINK FENCE AND GATES PART 1 GENERAL 1.01 SECTION INCLUDES A. Fabrication, furnishing and installation of chain link fence, chain link gates, and extension brackets with barbed wire.

More information

GIBEN PRESENTS THE INDUSTRIAL PANEL SAW MODEL

GIBEN PRESENTS THE INDUSTRIAL PANEL SAW MODEL GIBEN PRESENTS THE INDUSTRIAL PANEL SAW MODEL This and every photograph is representative only and are not intended as a scope of supply. They are merely an aid memoir of the various innovations available

More information

Injection Molding Design Guide. Table of Contents

Injection Molding Design Guide. Table of Contents Injection Molding Design Guide 400 Injection Molding Design Guide Table of Contents Injection Mold Tooling Process Comparison...2 Size Limitations...3 Straight Pull Design...4 Other Geometric Considerations...5

More information

TIM-MACHINE. Bending machine for aluminium and PVC profiles ENG

TIM-MACHINE. Bending machine for aluminium and PVC profiles ENG ENG Bending machine for aluminium and PVC profiles The most advanced bending machine equipped with 3D cameras which enable secure process, smart management and automated control of the bending process

More information

Brake Metal. Fabrication. Quality Consistency Service

Brake Metal. Fabrication. Quality Consistency Service Brake Metal Fabrication Quality Consistency Service Finishing Assembly BellPro Architectural, LLC is making a name for itself in the Glass and Glazing and construction industries by applying its 30 plus

More information

1. Injection Molding (Thermoplastics)

1. Injection Molding (Thermoplastics) 1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high

More information

producer of zinc, aluminium, magnesium die casting and plastic moulding

producer of zinc, aluminium, magnesium die casting and plastic moulding producer of zinc, aluminium, magnesium die casting and plastic moulding FAM Technika Odlewnicza is a modern producer of zinc, aluminium, magnesium die casting and plastic moulding. The Company is one of

More information

1) Cut-in Place Thermoforming Process

1) Cut-in Place Thermoforming Process Standard Thermoforming Equipment Overview There are three standard configurations for thermoforming equipment: 1. Heat and Cut-in-Place Forming 2. In-Line Forming with Steel Rule or Forged Steel Trim wand

More information

Cert No. AS7114. www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES

Cert No. AS7114. www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES Cert No. AS7114 www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES Freeman & Proctor established in 1949 to manufacture high quality tubular assemblies for

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Glossary. 3D Animation Using computer software to create and animate a three-dimensional representation of image data.

Glossary. 3D Animation Using computer software to create and animate a three-dimensional representation of image data. Glossary # 2D Control Drawing A line drawing showing various views of a product with details such as material, surface finish, volume, tolerances and critical dimensions. 3D Animation Using computer software

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

Reliable Metal Bending

Reliable Metal Bending Reliable Metal Bending Since 1984 Welcome to Bendpro CNC Mandrel Bending Our commitment to you... P3 Accuracy Guaranteed Quick response quotes F.I.S. freight inclusive pricing Short lead-times 25+ years

More information

La Gomera Awning. 5. Fabric Roller. Technical description

La Gomera Awning. 5. Fabric Roller. Technical description La Gomera Awning Technical description A. General The La Gomera is a heavy-duty retractable awning. It is designed for sun protection during the day, and ambient temperature control in the evening. The

More information

Pasture fence Pasture gates 156 159 Permanent fences 160 161

Pasture fence Pasture gates 156 159 Permanent fences 160 161 Pasture fence 154 www.growi.de Pasture fence Pasture gates 156 159 Permanent fences 160 161 155 Pasture fence pasture gates No. 5570 No. 5571 No. 5572 No. 5573 Comfort Line pasture gate Vertical C-profiles

More information

0600/13.02 QUICKLOC. Quick releases Efficient, secure and variable

0600/13.02 QUICKLOC. Quick releases Efficient, secure and variable 0600/13.02 QUICKLOC Quick releases Efficient, secure and variable QUICKLOC Quick releases Contents Page QUICKLOC quick releases 3 The advantages an overview 3 Function 4 Design 5 System Lock tops locking

More information

Luxury Coating Services

Luxury Coating Services Luxury Coating Services Automotive OEM Matt - Metallics - Soft - Satin - Gloss - Chrome Audio Navigation AC Airvent Hazard Button HVAC Panel Power Window Assembly CHENNAI Instrument Clusters Arm Rest Steering

More information

Technical Services & Capabilities

Technical Services & Capabilities Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product

More information

General Allowances for Insulation & Cladding

General Allowances for Insulation & Cladding TRADE OF Industrial Insulation PHASE 2 Module 1 Sheet Metal and Insulation Fundamentals UNIT: 4 General Allowances for Insulation & Cladding Produced by In cooperation with subject matter expert: Michael

More information

Corporate presentation Status August 2015

Corporate presentation Status August 2015 Technical filters, strainers and turned parts in perfection Corporate presentation Status August 2015 www.schimmel-kg.de 1 Josef Schimmel GmbH & Co. KG: Turned parts + technical filters: Creativity and

More information

Rapid Prototyping. Training Objective

Rapid Prototyping. Training Objective Training Objective After watching the program and reviewing this printed material, the viewer will understand the principles and practical applications of Rapid Prototyping. Basic concepts are explained

More information

Promotional Products. ZMO778803 Silicon Smart Phone Cover. Other Available Colours. Information. ZKC714116 Car Sun Visor.

Promotional Products. ZMO778803 Silicon Smart Phone Cover. Other Available Colours. Information. ZKC714116 Car Sun Visor. ZMO778803 Silicon Smart Phone Cover 250 FROM: $4.25 * Product Description: Colourful silicone case to protect your Iphone. Sizes: 12 cm x 6 cm x 1 cm ZKC714116 Car Sun Visor 250 FROM: $8.35 * Product Description:

More information

PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB

PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB OVERVIEW TYPE: GGB All composite construction Rigid extruded upvc aerofoil blade section Integral blade seals for low leakage operation Individual blades driven via reinforced styrene gear wheels in maintenance

More information

Pipe Clamps and Accessories

Pipe Clamps and Accessories Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3

More information

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend

More information

Colonnade Security Pipe

Colonnade Security Pipe Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,

More information

Dock Hardware & Accessory Products Catalog

Dock Hardware & Accessory Products Catalog Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

Injection Molding. Design Guide. Design Considerations for Rapid Manufacturing of Plastic Parts Using Injection Molding

Injection Molding. Design Guide. Design Considerations for Rapid Manufacturing of Plastic Parts Using Injection Molding Design Guide Design Considerations for Rapid Manufacturing of Plastic Parts Using Table of Contents 1 Injection Mold Tooling Process Comparison 3 2 Size Considerations 4 3 Considerations for Undercuts

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

HS-Steel-Classic. Curing chambers for the concrete block industry in a proven steel version

HS-Steel-Classic. Curing chambers for the concrete block industry in a proven steel version ANLAGENTECHNIK HS-Steel-Classic Curing chambers for the concrete block industry in a proven steel version + special galvanising + simple assembly due to snap-in connections and building kit system We build

More information

5Gravity. Conveyor. No. 5of 7. The most cost-effective and simplest conveying solution available

5Gravity. Conveyor. No. 5of 7. The most cost-effective and simplest conveying solution available Gravity Conveyor The most cost-effective and simplest conveying solution available No. of 7 2 3 4 Belt Conveyor For careful and extremely low noise conveying. Lineshaft Powered Roller Conveyor The most

More information

CPVC/METAL/CPVC COMPOSITE PIPING SYSTEMS

CPVC/METAL/CPVC COMPOSITE PIPING SYSTEMS CPVC/METAL/CPVC COMPOSITE PIPING SYSTEMS Robert M. Frimel Noveon, Inc. ABSTRACT For more than twenty years, CPVC compounds have been used to produce single-layer, allplastic tube and pipe for the Plumbing,

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

M.P.M. PLASTIC MATERIALS EXTRUSION JUNE 2009 M.P.M. ESTRUSIONE MATERIE PLASTICHE

M.P.M. PLASTIC MATERIALS EXTRUSION JUNE 2009 M.P.M. ESTRUSIONE MATERIE PLASTICHE PLASTIC MATERIALS EXTRUSION Cold rooms and refrigerated cabinets profiles JUNE 2009 1 PLASTIC MATERIALS EXTRUSION C O N T E N T S 1 - STANDARD SYSTEM page 5 2 - SPEED SYSTEM page 9 3 - CLEAN SYSTEM page

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

Hardware Fitting Accessories Information

Hardware Fitting Accessories Information Information Door seals Areas of application Protection against cold, draught and vermin Reduces light leakage Sound insulation Smoke control Fire resistance Reduces the energy consumption of air conditioning

More information

CNC Tool Storage Solutions

CNC Tool Storage Solutions CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in

More information

Grinding, lapping, polishing, EDM, laser cut, water jest, etc.

Grinding, lapping, polishing, EDM, laser cut, water jest, etc. Grinding, lapping, polishing, EDM, laser cut, water jest, etc. Grinding is an abrasive machining process that uses a grinding wheel as the cutting tool. Aluminum oxide, silicon carbide, diamond, and cubic

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

Puddle Flange. FRANK Puddle Flange

Puddle Flange. FRANK Puddle Flange Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many

More information

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4

More information

The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.

The DAVID Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering. The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans

More information

Zakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl

Zakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl Zakład Metalowy ALEM Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl We as ALEM have many years of experience in processing metals. We offer you a high variety of services in machining, electrical

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data January, 2013 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

Architectural Specifications* MODEL HDE

Architectural Specifications* MODEL HDE MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page

More information

A long-established trading company that deals in 1,300 tons of steel products every month.

A long-established trading company that deals in 1,300 tons of steel products every month. Case Study KAMATA SPECIAL STEEL CO.,LTD. Profitability has increased through the improvement of material yield and reduction of labor. A long-established trading company that deals in 1,300 tons of steel

More information

The Coating Machinery Experts Supplier Questionnaire

The Coating Machinery Experts Supplier Questionnaire Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.

More information

isd dunaferr Product catalogue

isd dunaferr Product catalogue isd dunaferr Product catalogue COLD ROLLED PRODUCTS Hot rolled base material after pickling with hydrochloric acid is rolled to the final dimension on reversing stands then it is annealed in bell furnaces.

More information

Fence SpecCheck Wheatland Tube Company 800 343 0124

Fence SpecCheck Wheatland Tube Company 800 343 0124 Fence SpecCheck Wheatland Tube Company 800 343 0124 www.wheatland.com ASTM Specifications (May 2014) www.astm.org A53/A53M-12 Schedule 40 & 80 Pipe: Specification for Pipe, Steel, Black and Hot- Dipped,

More information

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing

More information

Casting. Training Objective

Casting. Training Objective Training Objective After watching the program and reviewing this printed material, the viewer will learn the essentials of the various metal casting processes used in industry today. The basic principles

More information

Copyright 1997 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES PUNCH PRESSESSHEARING AND BENDING NARRATION (VO): MACHINE...

Copyright 1997 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES PUNCH PRESSESSHEARING AND BENDING NARRATION (VO): MACHINE... FUNDAMENTAL MANUFACTURING PROCESSES PUNCH PRESSESSHEARING AND BENDING SCENE 1. CG: REVIEW white text on black tape 63, 12:00:15-12:03:49 review music SCENE 2. tape 312, 00:03:30-00:03:36 punch press punching

More information

Introduction to Manufacturing Process

Introduction to Manufacturing Process Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per

More information

SECTION 4: Cable Ladder Stainless Steel & Aluminium

SECTION 4: Cable Ladder Stainless Steel & Aluminium SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General

More information

www.steelformcatering.com

www.steelformcatering.com www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in

More information

ON-DEMAND PARTS MANUFACTURING. Quickparts

ON-DEMAND PARTS MANUFACTURING. Quickparts ON-DEMAND PARTS MANUFACTURING Quickparts On-demand parts manufacturing services Using our additive and traditional manufacturing technologies, bring your design to life and create real functional end-use

More information

RAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping

RAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping RAPID PROTOTYPING Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping Outline and explain differences of Rapid Prototyping Technologies

More information

Los bienes se encuentran ubicados en: Tultitlán, Naucalpan y Guadalajara.

Los bienes se encuentran ubicados en: Tultitlán, Naucalpan y Guadalajara. Lote #1 Lote #2 Lote #3 Lote #4 Lote #5 Lote #6 Lote #7 Lote #8 Lote #9 Lote #10 Lote #11 Lote #12 Lote #1 1 MARCA GORTON, MODELO 8 1/2D, MILLING MACHINE; S/N 13292; Table Size: 9 x 29 ; Longitudinal Feed

More information

What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004

What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004 2.008 Design & Manufacturing II What is a mold? From Webster: a cavity in which a substance is shaped: as (1) : a matrix for casting metal (2) : a form in which food is given a decorative shape Spring

More information

MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS

MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS upvc WINDOWS AVAILABLE COLOURS: White 9010 Ivory 1015 Grey 7015 Black 9005 Navy 5011 Red 3003 Green 6005 Light golden oak Silver 7001 Oregon pine Dark woodgrain Dual colours are available also: Grey outside

More information

Carton - Straight Link Machine Chain (Order Unit is Feet )

Carton - Straight Link Machine Chain (Order Unit is Feet ) Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),

More information

Product-group categories

Product-group categories Product-group categories 1. Development 1.1 Development and design 1.2 IT systems/software 1.3 Model making and prototyping 1.4 Tooling and mold making 1.5 Tools 1.6 Semi-finished goods, materials 1.7

More information

PRODUCTS. Stainless Steel (Ferritic & Austenitic) Aluminised Steel Mild Steel Titanium

PRODUCTS. Stainless Steel (Ferritic & Austenitic) Aluminised Steel Mild Steel Titanium S u p p l i e r s o f H i g h Q u a l i t y P e r f o r a t e d S t a i n l e s s S t e e l Tu b i n g THE COMPANY The Joint Perforating Company, established in 2001 has re-invented the perforating process.

More information

CNC Tool Storage Solutions

CNC Tool Storage Solutions Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes

More information

An introduction to selling blinds

An introduction to selling blinds An introduction to selling blinds We are a small family owned independent blind manufacturer. We have been manufacturing blinds for trade and contract customers since 1991, from our factory in Hevingham

More information

Technical Data Butt Welding Machine Model P-SW

Technical Data Butt Welding Machine Model P-SW Technical Data Butt Welding Machine Model P-SW INGENIA 50.30 P-SW Butt Welding Machine P-SW The high performance INGENIA Butt-Welding machines are made for the rough working environment. The welding cycle

More information