Cast Steel Bolted Bonnet Angle Stop Check Valves Sizes: 2 thru 12 Pressure Class: 150 thru 600
|
|
- Jemimah Henderson
- 7 years ago
- Views:
Transcription
1 ast Steel olted onnet ngle Stop heck Valves s: 2 thru 12 Pressure lass: 150 thru 600 Manufactured by Newmans 53
2 Newco ast arbon Steel olted onnet Valves Product Line Technical ata Typical Newco ast Steel olted onnet ngle Stop heck Valve Expanded View 1. ody: Newco cast steel bodies provide low resistance flow and optimum strength and performance. 2. onnet: Newco bonnet assemblies are built to the same standards as the bodies. 3. ack Seat ushing: The back seat, when engaged with the stem head, provides a stable shutoff to the stuffing box which isolates the packing from flow exposure. 4. Stem: The stem inserts vertically into the disc. 5. isc: Newmans 1-piece disc is machined to the tightest tolerances to ensure trouble free shutoff and cycling. 6. isc Nut: The disc nut serves as a mechanical guide acting on the stem to ensure proper alignment of the disc to the seat. 7. Gland: ompresses the packing to create a stem seal above the back seat, between the bonnet and stem. 8. Gland Flange: pplies pressure to the gland for accurate packing adjustments. 9. & 10. Gland olts & Nuts: The gland bolt and nut allows for easy adjustments for packing compression. 11. Gland olt Pin: The gland bolt pin secures the gland bolts to the yoke & bonnet. 12. Packing: The packing creates a seal above the back seat, between the bonnet and stem. 13. Stuffing ox: The stuffing box contains the packing. 14. Stem Nut: The stem nut provides a precision guide for proper stem alignment. 15. Handwheel: The handwheel cycles the valve. 16. Handwheel Nut: The handwheel nut secures the handwheel to the bonnet assembly. 17. Handwheel Washer: The washer helps to prevent loosening or distributes pressure evenly. 18. onnet Gasket: The bonnet gasket creates a leakproof seal between the bonnet and body. 19. & 20. onnet Studs & Nuts: The bonnet studs and nuts secure the bonnet to the body. 21. Seat Ring: To ensure a stable shutoff, the seat ring is aligned and seal-welded into the valve, then precision ground for optimal seating. 22. isc Guide: The disc guides provide a stable track for keeping the disc aligned with the seat during cycling. 23. Spacer Ring: ssists the packing rings in creating a seal above the back seat, between the bonnet and stem
3 Newco ast arbon Steel olted onnet Valves Product Line Technical ata ast Steel olted onnet ngle Stop hecks Styles: 2, 3, & 4/2 lass: s: 2 thru 12 Pressure lass Range: 150 thru 600 esign and Manufacturing Standards Valve esign: SME 16.34/PI 600 Flange imensions: SME 16.5, (Series ) Face-to-Face imensions: SME Tested in ccordance with: PI 598 Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody STM 216 GR.W Packing Graphite w/raided arbon Fiber End Rings Seat Ring STM 105/ Gland olt Pins STM 36 isc 2 thru 4 STM STM Gland olts STM STM 193-7M STM 216- Gland STM STM isc 5 and larger 13% hrome W/316 Gland Flange STM 216-W isc Nut STM STM Gland Nuts STM 194-2H STM 194-2HM Stem STM STM Stem Nut STM *onnet Gasket Spiral Wound 316 Stainless Steel/Graphite Split Ring STM onnet STM 216-W Handwheel Washer STM 36 onnet Studs STM STM 193-7M Handwheel Nut STM 36 onnet Nuts STM 194-2H STM 194-2HM Handwheel STM 539 Type ( ) ack Seat ushing STM STM Spacer Ring STM STM Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes available on request. imensions are subject to change without notice. lass 150 nps dn in mm in mm in mm in mm lbs kg
4 Newco ast arbon Steel olted onnet Valves Product Line Technical ata ast Steel olted onnet ngle Stop hecks Styles: 2, 3, & 4/2 lass: s: 2 thru 12 Pressure lass Range: 150 thru 600 esign and Manufacturing Standards Valve esign: SME 16.34/PI 600 Flange imensions: SME 16.5, (Series ) Face-to-Face imensions: SME Tested in ccordance with: PI 598 Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody STM 216 GR.W Packing Graphite w/raided arbon Fiber End Rings Seat Ring STM 105/ Gland olt Pins STM 36 isc 2 thru 4 STM STM Gland olts STM STM 193-7M STM 216- Gland STM STM isc 5 and larger 13% hrome W/316 Gland Flange STM 216-W isc Nut STM STM Gland Nuts STM 194-2H STM 194-2HM Stem STM STM Stem Nut STM *onnet Gasket Spiral Wound 316 Stainless Steel/Graphite Split Ring STM onnet STM 216-W Handwheel Washer STM 36 onnet Studs STM STM 193-7M Handwheel Nut STM 36 onnet Nuts STM 194-2H STM 194-2HM Handwheel STM 539 Type ( ) ack Seat ushing STM STM Spacer Ring STM STM Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes available on request. imensions are subject to change without notice. lass 300 nps dn in mm in mm in mm in mm lbs kg
5 Newco ast arbon Steel olted onnet Valves Product Line Technical ata ast Steel olted onnet ngle Stop hecks Styles: 2, 3, & 4/2 lass: s: 2 thru 8 Pressure lass Range: 150 thru 600 esign and Manufacturing Standards Valve esign: SME 16.34/PI 600 Flange imensions: SME 16.5, (Series ) Face-to-Face imensions: SME Tested in ccordance with: PI 598 Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody STM 216 GR.W Packing Graphite w/raided arbon Fiber End Rings Seat Ring STM 105/ Gland olt Pins STM 36 isc 2 thru 4 STM STM Gland olts STM STM 193-7M STM 216- Gland STM STM isc 5 and larger 13% hrome W/316 Gland Flange STM 216-W isc Nut STM STM Gland Nuts STM 194-2H STM 194-2HM Stem STM STM Stem Nut STM *onnet Gasket Spiral Wound 316 Stainless Steel/Graphite Split Ring STM onnet STM 216-W Handwheel Washer STM 36 onnet Studs STM STM 193-7M Handwheel Nut STM 36 onnet Nuts STM 194-2H STM 194-2HM Handwheel STM 539 Type ( ) ack Seat ushing STM STM Spacer Ring STM STM Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes available on request. imensions are subject to change without notice. lass 600 nps dn in mm in mm in mm in mm lbs kg
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationProduct Line Technical Data
NEWO - ast Steel olted onnet Valves Gates Globes Angles Swing hecks Tilting Disc hecks Stop hecks orporate Headquarters Stafford, Texas 13127 Trinity Dr. Stafford, TX 77477 Tel: 281.302.4900 Fax: 281.302.4801
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationNEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual
NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual TABLE OF CONTENTS 1. Introduction and Safety Information... 1 1.1. Introduction... 1 1.2. Safety Information...
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationSpecification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
More informationMaterials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
More informationTrunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationValve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
More informationGeneral Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V
CRNE Iron Valves Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section... 25 Check Section... 30 Technical Data...
More informationCAST STEEL PLUG VALVE CATALOG
ST STL PLUG VLV TLOG www.walworthvalves.com INX INTROUTION NGINRING ONTROL... 5 QULITY SYSTM... 5 QULITY ONTROL QUIPMNT... 9 OMPNSTOR, TOP NTRY, N GS SRVI STL PLUG VLVS WLWORTH LURIT PLUG VLVS, VNTGS
More informationDiaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions
Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions 1. General 2. Installation instructions 3. Maintenance instructions 4. Spare parts list IMPORTANT SAFETY
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
More informationFig B36 Stainless Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationBaumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
More informationFlanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
More informationFisher EDR and ETR easy-e Valves
Instruction Manual EDR and ETR Valves Fisher EDR and ETR easy-e Valves Contents Introduction... Scope of Manual... Description... Specifications... 2 Educational Services... 2 Installation... 4 Maintenance...
More informationVG2000 Series Cast Iron Flanged Globe Valves
VG2000 Series ast Iron Flanged Globe Valves Installation Instructions Part No. 14-1161-106, Rev. Issued November 15, 2013 Supersedes June 15, 2007 pplications VG2000 Series ast Iron Flanged Globe Valves
More informationInstallation, Operating and Maintenance Instructions for AEON Metal Seated Gate Valve (MSGV) Water
1 Foreword 1.1 Thank you for choosing one of the range of AEON's BS standard valves. For safety purposes, the user shall read this instruction to fully understand the operation of the product. 2 AEON Design
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationLarge bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API
Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies
More informationStockham Iron Valves. Setting The Standard In Service
Stockham Iron Valves Setting The Standard In Service Setting the Standard in Service The Stockham Pledge Stockham is committed to setting the standard in quality service to the Commercial Construction
More informationPacking and gaskets Page 029 of 040
Packing and gaskets Page 029 of 040 7.3 Packing and gaskets The chemical industry has carried out cadastral surveys for many years. These surveys provide valuable information regarding environmental pollution
More informationTECHNICAL BULLETIN. Kämmer LinedFlow - 132000 Corrosive Application Valves. Experience In Motion FCD KMENTB3221-01 04/12
TECHNICAL BULLETIN Kämmer LinedFlow - 132000 Corrosive Application Valves FCD KMENTB3221-01 04/12 Experience In Motion Description ¼-inch NPT test port Large guided stem area Bellows seal eliminates stem
More informationCrane Cast Steel Valves
Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve
More informationPLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationbrands you trust. CRANE - Bronze Valves www.craneenergy.com
brands you trust. CRNE - ronze Valves Key Features & pplications Key Features & enefits Full Pressure Class offering: Class 5, Class 50, Class 00, Class 00, 00 CWP, and 00 CWP. Highly specified and proven
More informationCast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Cast Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Steel Valves...1 Standard Product Range...2 Standard
More information2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationFisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More informationABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
More informationSeries 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationHM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationFree Floating Lever Drain Traps For Loads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar)
Free Floating ever rain Traps For oads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar) iquid rainers Table -14. Maximum Operating Pressures for Handling ifferent Specific Gravity iquids
More informationMP8000 Series Pneumatic Valve Actuators
14-1161- 9, Rev. A Technical Bulletin MP8000 Issue Date March 2016 MP8000 Series Pneumatic Valve Actuators Pre-Assembly Details Page 3 MP8000 Actuator Components 3 Tools Required to Assemble an MP8000
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More informationFisher ES and EAS Sliding-Stem Control Valves
ES Valve D0000 Product Bulletin Fisher ES and EAS Sliding-Stem Control Valves Fisher ES and EAS general-purpose control valves (figures and ) are used for throttling or on-off control of a wide variety
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationFisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
More informationInstruction Manual EH10000 06/10. Putting You In Control. 10000 Series. Double Ported Globe Valves
Putting You In Control 10000 Series Double Ported Globe Valves Instruction Manual EH10000 06/10 Table of Contents Page 1. Introduction...2 2. Unpacking...2 3. Installation...2 4. Air Piping...2 5. Body
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationARI-ASTRA / ASTRA Plus Combinend flow regulating valve
ARI-ASTRA - Free of maintenance combinend flow regulating valve - soft sealed (to 120 C) ARI-ASTRA Plus - Free of maintenance combinend flow regulating valve (to 175 C resp. 350 C) ARI-ASTRA / ASTRA Plus
More informationType 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationSISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
More informationBAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationEWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationFilter Housing SG Standard
Page of 7 Filter Housing SG Standard The steel standard filter housings with econometer and pneumatic drain are designed for the purification of compressed air and gases. Due to the modular design of the
More informationType 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H or pilot (see Figure 1). These pilots
More informationType 3244-1 and Type 3244-7 Pneumatic Control Valves. Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions EB 8026 EN
Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions E 8026 EN Edition July 2014 Definition of signal words DNGER! Hazardous
More informationABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More information08.09. Triple Service Valve Assembly
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic Tri-Service valve is an assembly (shipped as individual components) of a standard Victaulic butterfly or Vic-Plug valve and a check valve. This combination
More informationFloat and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationGATE, CHECK, LOW PRESSURE VALVES, AND Y-STRAINERS IT S ALL ABOUT YOU
GTE, HEK, LOW PRESSURE VLVES, ND Y-STRINERS IT S LL OUT YOU RONZE SREW-OVER ONNET GTE VLVES ND x T-414 S-414 LEGEND T-414/S-414 gate valves are constructed of heavy duty bronze. They have a screw-over
More informationFire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationCHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
More informationDeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
More informationWaveguide and Flange Data
Waveguide and lange ata The following table details the lann standard flanges. Most products are available with other flange styles and special langes requency Range (z) Waveguide esignation ritish W I
More informationBWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More informationASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive
More information10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationThe Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationHigh CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationRMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationFlowserve - Edward Valves Development of the Flowserve Edward Equiwedge Gate Valve
Flowserve - Edward Valves Development of the Flowserve Edward Equiwedge Gate Valve Problem Gate valves in severe service applications that experience premature trim wear from seat guided discs or leakage
More informationL&T CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class 150-2500. 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34
L&T CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34 Introduction L&T Cast Steel Gate, Globe and Check Valves have established themselves
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationMUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
More informationVALVEWORKS USA OPERATION AND SERVICE MANUAL FOR MODEL FM 2 4-1/16 GATE VALVE
OPERATION AND SERVICE MANUAL FOR MODEL FM 2 4-1/16 GATE VALVE INTRODUCTION In appreciation to our customer for purchasing our product, we have prepared this Operation Manual to assist you in the Operation,
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationBALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationFlygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More information