Multiple Pan/Tilt/Lens Control PIH-308/ INSTRUCTION MANUAL

Transcription

1 Multiple Pan/Tilt/Lens Control PIH-08/08- INSTRUCTION MANUAL

2 CAUTION RISK OF ELECTRIC SHOCK CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. PRECAUTIONS Do not drop or strike this equipment. It will cause damage to the equipment. Do not install the equipment near any naked flames or heat sources. The presents of flammable gas or object in the operating environment or exposing this unit to direct sunlight may cause fire and severe injury. Do not expose this unit to rain, moisture, smoke or dust environment. May cause short circuit, fire and serious damage to this unit. Unplug this unit and have it checked by qualified service personnel. Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor ventilated places. Allow 0cm between this unit and its surroundings. May cause overheat. The normal operating temperature is 0 C ~ 0 C. Do not continue to operate the unit under abnormal conditions such as detection of smoke, strange smell or no display on screen while power is turned on. Contact qualified service personnel for help. Do not touch the power connection with wet hands. May cause short circuit or electric shock. Do not damage the power cord or leave it under pressure. May cause fire or shock hazard. Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary magnetic interference. These interference will cause color confusion and screen fluctuation. Do not drop metallic parts through slots. This could permanently damage the appliance. Connection cables should be grounded properly. Sudden surge such as lightening will damage the system permanently.

3 PREFACE Thank you for choosing PIH-08/08- Multiple Pan/Tilt/Lens Control. For trouble free installation and optimum performance please read this manual thoroughly before attempting installation or operation. CONTENTS Page. Front Panel. Rear Panel. Interconnecting Diagram. Remarks. Specifications

4 . FRONT PANEL LENS SELECT IRIS OPEN ZOOM FOCUS WIDE LENS NEAR SPEED UP LEFT RESET PAN/TILT SELECT POWER RESET S F PIH-08 CLOSE TELE FAR DOWN RIGHT MULTIPLE PAN/TILT/LENS CONTROLS LEFT/RIGHT LOCK POWER SWITCH PAN/TLLT/SELECT: Setting switches for manual control of pan/tilts. LEFT/RIGHT LOCK: Double-color switches which will go panning automatically when indicator lamp of switches turns to green. RESET: To reset manual mode of pan/tilt. LEFT/RHGIT: To select panning direction when manual mode is preseted. UP/DOWN: To select tilting direction when manual mode is preseted. LENS SPEED: To adjust speed of FOCUS/ZOOM/IRIS. FOCUS (NEAR/FAR): To adjust FOCUS/ZOOM/IRIS to get a fine picture. ZOOM (WIDE/TELE): To adjust FOCUS/ZOOM/IRIS to get a fine picture. IRIS (OPEN/CLOSE): To adjust FOCUS/ZOOM/IRIS to get a fine picture. LENS SELECT: Setting switches for control of definite lens. RESET: To reset selecting of lens.

5 . REAR PANEL FUSE AC INPUT FUSE HOLDER PAN/TILT OUTPUT IRIS/ZOOM/FOCUS OUTPUT AC INPUT FUSE HOLDER PAN/TILT OUTPUT: P Connector.. Auto. Common. Down. Up. Right. Left IRIS/ZOOM/FOCUS OUTPUT: P Connector.. Grounding. IRIS. No Connection. Zoom. Focus. No Connection

6 . INTERCONNECTING DIAGRAM PAN/TILT OUTPUTS AUTO COMMON DOWN UP RIGHT LEFT LENS OUTPUTS GROUNDING IRIS NO CONNECTION ZOOM FOCUS NO CONNECTION. REMARKS a. The PIH-08 controls sets of PAN/TILTS which are fed AC input of 7V or 0V (potion). INPUT a.c. 7V or a.c. 0V PIH-08 OUTPUT a.c. 7V OR a.c. 0V (FOR PAN/TILTS) DC V... (FOR LENS) b. The PIH-08- offers a.c. Input of V by adding an external power supplier (PS-0). INPUT OUTPUT OUTPUT a.c. 7V or a.c. 0V a.c. V Converter PS-0 a.c. V PIH-08- DC V (FOR LENSES) a.c. V (FOR PAN/TILTS)

7 . SPECIFICATIONS PIH-08 / PIH-08- MULTIPLE PAN/TILT/LENS CONTROL Model No. Input/Output Voltage PIH-08 7/0Va.c., 0/0Hz PIH-08- Va.c., 0/0Hz Pan/Tilt Control Buttons Direction Control Focus Zoom Iris Lens Speed Push button / Rocker and paddle switch UP/DOWN, LEFT/RIGHT NEAR/FAR switchable WIDE/TELE switchable OPEN/CLOSE switchable Knob control Lens Output Voltage Power Consumption Input/Output connector V ~ 9V DC, 00mA 8 Watts DIN Position Indicator Construction Dimension Weight Double-Color LED Steel, with silver gray baked enamel finish 8(W) x 0(H) x (D) mm. kg PS-0 POWER SUPPLIER Input Voltage Output Voltage Current Construction Dimension Weight 7V/0V/0V a.c. v.a.c. 8Amp Aluminum 0(W) x 0(H) x 9(D) mm.9 kg

8 PIH-0 PIH-0 PIH-0 PIH-0 PIH-0 LENS SELECT PIH-08 IRIS OPEN ZOOM FOCUS LENS WIDE NEAR SPEED UP LEFT RESET S F CLOSE TELE FAR DOWN RIGHT MULTIPLE PAN/TILT/LENS CONTROLS RESET PAN/TILT SELECT LEFT/RIGHT LOCK POWER POWER Outdoor Pan/Tilt - Position Auto Switcher Monitor Outdoor Pan/Tilt Indoor Pan/Tilt Indoor Pan/Tilt Indoor Pan/Tilt PIH-08/PIH-08- Multiple Pan/Tilt/Lens Control AC Input PS-0 Power Supplier (Used in PIH-08-) -08CSE-

9 MERIT LILIN ENT. CO., LTD -08CSE